From 0f4125cc2ea864e02b7ad01ed6a0dd446660cd61 Mon Sep 17 00:00:00 2001 From: Marc Fonvieille Date: Sat, 15 Nov 2003 17:26:35 +0000 Subject: [PATCH] Translate comments in scripts. --- .../books/handbook/ppp-and-slip/chapter.sgml | 174 +++++++++--------- 1 file changed, 87 insertions(+), 87 deletions(-) diff --git a/fr_FR.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml b/fr_FR.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml index 4a2c200df1..f88bf4a9ac 100644 --- a/fr_FR.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml +++ b/fr_FR.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml @@ -198,21 +198,21 @@ pourrait être utilisé pour se connecter à la liaison PPP d'un concentrateur Cisco: - crtscts # enable hardware flow control -modem # modem control line -noipdefault # remote PPP server must supply your IP address. - # if the remote host does not send your IP during IPCP - # negotiation, remove this option -passive # wait for LCP packets -domain ppp.foo.com # put your domain name here + crtscts # contrôle de flux matériel +modem # liaison par modem +noipdefault # adresse IP affectée par le serveur PPP distant + # si la machine distante ne vous donne pas d'adresse + # IP lors de la négociation IPCP, retirez cette option +passive # attendre les paquets LCP +domain ppp.foo.com # mettre ici votre nom de domaine -:<remote_ip> # put the IP of remote PPP host here - # it will be used to route packets via PPP link - # if you didn't specified the noipdefault option - # change this line to <local_ip>:<remote_ip> +:<remote_ip> # mettre ici l'adresse IP de la machine PPP distante + # elle servira à router des paquets via la liaison PPP + # si vous n'avez pas précisé l'option noipdefault + # changez cette ligne en <ip_locale>:<ip_distante> -defaultroute # put this if you want that PPP server will be your - # default router +defaultroute # mettre cette ligne si vous voulez que le serveur PPP soit + # votre routeur par défaut Pour se connecter: @@ -256,13 +256,13 @@ defaultroute # put this if you want that PPP server will be your ps ax |grep pppd |grep -v grep pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing pppd, PID=' ${pid} + echo 'arrêt de pppd, PID=' ${pid} kill ${pid} fi ps ax |grep kermit |grep -v grep pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing kermit, PID=' ${pid} + echo 'arrêt de kermit, PID=' ${pid} kill -9 ${pid} fi @@ -287,14 +287,14 @@ pppd /dev/tty01 19200 #!/bin/sh pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'` if [ X${pid} != "X" ] ; then - echo 'killing pppd, PID=' ${pid} + echo 'arrêt de pppd, PID=' ${pid} kill -TERM ${pid} fi ps ax |grep kermit |grep -v grep pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing kermit, PID=' ${pid} + echo 'arrêt de kermit, PID=' ${pid} kill -9 ${pid} fi @@ -311,9 +311,9 @@ kermit -y /etc/ppp/kermit.hup #!/bin/sh pid=`ps ax| grep pppd |grep -v grep|awk '{print $1;}'` if [ X${pid} != "X" ] ; then - echo 'pppd running: PID=' ${pid-NONE} + echo 'pppd actif: PID=' ${pid-NONE} else - echo 'No pppd running.' + echo 'Pas de pppd en cours d'exécution.' fi set -x netstat -n -I ppp0 @@ -323,7 +323,7 @@ ifconfig ppp0 /etc/ppp/kermit.hup, qui devrait contenir: - set line /dev/tty01 ; put your modem device here + set line /dev/tty01 ; mettre ici le périphérique pour votre modem set speed 19200 set file type binary set file names literal @@ -354,22 +354,22 @@ exit /dev/cuaa1 115200 -crtscts # enable hardware flow control -modem # modem control line +crtscts # contrôle de flux matériel +modem # liaison par modem connect "/usr/bin/chat -f /etc/ppp/login.chat.script" -noipdefault # remote PPP serve must supply your IP address. - # if the remote host doesn't send your IP during - # IPCP negotiation, remove this option -passive # wait for LCP packets -domain <your.domain> # put your domain name here +noipdefault # adresse IP affectée par le serveur PPP distant + # si la machine distante ne vous donne pas d'adresse + # IP lors de la négociation IPCP, retirer cette option +passive # attendre les paquets LCP +domain <your.domain> # mettre ici votre nom de domaine -: # put the IP of remote PPP host here - # it will be used to route packets via PPP link - # if you didn't specified the noipdefault option - # change this line to <local_ip>:<remote_ip> +: # mettre ici l'adresse IP de la machine PPP distante + # elle servira à router des paquets via la liaison PPP + # si vous n'avez pas précisé l'option noipdefault + # modifier cette ligne en <ip_locale>:<ip_distante> -defaultroute # put this if you want that PPP server will be - # your default router +defaultroute # mettre cette ligne si vous voulez que le serveur PPP soit + # votre routeur par défaut /etc/ppp/login.chat.script: @@ -378,9 +378,9 @@ defaultroute # put this if you want that PPP server will be ligne. - ABORT BUSY ABORT 'NO CARRIER' "" AT OK ATDT<phone.number> - CONNECT "" TIMEOUT 10 ogin:-\\r-ogin: <login-id> - TIMEOUT 5 sword: <password> + ABORT BUSY ABORT 'NO CARRIER' "" AT OK ATDT<numéro_de_téléphone> + CONNECT "" TIMEOUT 10 ogin:-\\r-ogin: <nom_d_utilisateur> + TIMEOUT 5 sword: <mot_de_passe> Une fois que ces fichiers sont installés et correctement modifiés, tout ce dont vous avez besoin de @@ -397,17 +397,17 @@ defaultroute # put this if you want that PPP server will be /etc/ppp/options devrait être semblable à ce qui suit: - crtscts # Hardware flow control -netmask 255.255.255.0 # netmask ( not required ) -192.114.208.20:192.114.208.165 # ip's of local and remote hosts - # local ip must be different from one - # you assigned to the ethernet ( or other ) - # interface on your machine. - # remote IP is ip address that will be - # assigned to the remote machine -domain ppp.foo.com # your domain -passive # wait for LCP -modem # modem line + crtscts # contrôle de flux matériel +netmask 255.255.255.0 # masque de sous-réseau (facultatif) +192.114.208.20:192.114.208.165 # adresses IP des machines locales et distantes + # l'adresse locale ne doit pas être la même que + # celle que vous avez assignée à l'interface + # Ethernet (ou autre) de la machine. + # l'adresse IP de la machine distante est + # l'adresse IP qui lui sera affectée +domain ppp.foo.com # votre nom de domaine +passive # attendre LCP +modem # liaison modem La procédure /etc/ppp/pppserv ci-dessous demandera à pppd @@ -417,24 +417,24 @@ modem # modem line ps ax |grep pppd |grep -v grep pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing pppd, PID=' ${pid} + echo 'arrêt de pppd, PID=' ${pid} kill ${pid} fi ps ax |grep kermit |grep -v grep pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing kermit, PID=' ${pid} + echo 'arrêt de kermit, PID=' ${pid} kill -9 ${pid} fi -# reset ppp interface +# réinitialiser l'interface ppp ifconfig ppp0 down ifconfig ppp0 delete -# enable autoanswer mode +# activer le mode réponse automatique kermit -y /etc/ppp/kermit.ans -# run ppp +# lancer ppp pppd /dev/tty01 19200 Utilisez cette procédure @@ -445,13 +445,13 @@ pppd /dev/tty01 19200 ps ax |grep pppd |grep -v grep pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing pppd, PID=' ${pid} + echo 'arrêt de pppd, PID=' ${pid} kill ${pid} fi ps ax |grep kermit |grep -v grep pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'` if [ "X${pid}" != "X" ] ; then - echo 'killing kermit, PID=' ${pid} + echo 'arrêt de kermit, PID=' ${pid} kill -9 ${pid} fi ifconfig ppp0 down @@ -482,8 +482,8 @@ inp 5 OK out ATH0\13 inp 5 OK echo \13 -out ATS0=1\13 ; change this to out ATS0=0\13 if you want to disable - ; autoanswer mod +out ATS0=1\13 ; remplacer cela par ATS0=0\13 si vous voulez désactiver + ; le mode réponse automatique inp 5 OK echo \13 exit @@ -498,14 +498,14 @@ exit distante. ; -; put the com line attached to the modem here: +; mettre ici la liaison série à laquelle est raccordé le modem: ; set line /dev/tty01 ; -; put the modem speed here: +; mettre ici la vitesse du modem: ; set speed 19200 -set file type binary ; full 8 bit file xfer +set file type binary ; transfert 8 bits set file names literal set win 8 set rec pack 1024 @@ -516,44 +516,44 @@ set command bytesize 8 set flow none set modem hayes set dial hangup off -set carrier auto ; Then SET CARRIER if necessary, -set dial display on ; Then SET DIAL if necessary, +set carrier auto ; puis SET CARRIER si nécessaire, +set dial display on ; puis SET DIAL si nécessaire, set input echo on set input timeout proceed set input case ignore -def \%x 0 ; login prompt counter +def \%x 0 ; compteur d'ouverture de session goto slhup -:slcmd ; put the modem in command mode +:slcmd ; mettre le modem en mode commande echo Put the modem in command mode. -clear ; Clear unread characters from input buffer +clear ; vider le tampon d'entrée pause 1 -output +++ ; hayes escape sequence -input 1 OK\13\10 ; wait for OK +output +++ ; séquence d'échappement Hayes +input 1 OK\13\10 ; attendre OK if success goto slhup output \13 pause 1 output at\13 input 1 OK\13\10 -if fail goto slcmd ; if modem doesn't answer OK, try again +if fail goto slcmd ; si le modem ne répond pas OK, réessayer -:slhup ; hang up the phone -clear ; Clear unread characters from input buffer +:slhup ; raccrocher la ligne +clear ; vider le tampon d'entrée pause 1 echo Hanging up the phone. -output ath0\13 ; hayes command for on hook +output ath0\13 ; commande Hayes pour raccrocher input 2 OK\13\10 -if fail goto slcmd ; if no OK answer, put modem in command mode +if fail goto slcmd ; si pas de réponse OK, passer le modem en mode commande -:sldial ; dial the number +:sldial ; composer le numéro pause 1 echo Dialing. -output atdt9,550311\13\10 ; put phone number here -assign \%x 0 ; zero the time counter +output atdt9,550311\13\10 ; mettre ici le numéro de téléphone +assign \%x 0 ; mettre le compteur à zéro :look -clear ; Clear unread characters from input buffer -increment \%x ; Count the seconds +clear ; vider le tampon d'entrée +increment \%x ; compter les secondes input 1 {CONNECT } if success goto sllogin reinput 1 {NO CARRIER\13\10} @@ -567,14 +567,14 @@ if success goto slhup if < \%x 60 goto look else goto slhup -:sllogin ; login -assign \%x 0 ; zero the time counter +:sllogin ; ouverture de session +assign \%x 0 ; mettre le compteur à zéro pause 1 echo Looking for login prompt. :slloop -increment \%x ; Count the seconds -clear ; Clear unread characters from input buffer +increment \%x ; compter les secondes +clear ; vider le tampon d'entrée output \13 ; ; put your expected login prompt here: @@ -585,25 +585,25 @@ reinput 1 {\255} if success goto slhup reinput 1 {\127} if success goto slhup -if < \%x 10 goto slloop ; try 10 times to get a login prompt -else goto slhup ; hang up and start again if 10 failures +if < \%x 10 goto slloop ; essayer 10 fois d'obtenir une invite de session +else goto slhup ; raccrocher et recommencer après 10 échecs :sluid ; -; put your userid here: +; mettre ici votre nom d'utilisateur: ; -output ppp-login\13 +output nom-d-utilisateur-ppp\13 input 1 {Password: } ; -; put your password here: +; mettre ici votre mot de passe: ; -output ppp-password\13 +output mot-de-passe-ppp\13 input 1 {Entering SLIP mode.} echo quit :slnodial -echo \7No dialtone. Check the telephone line!\7 +echo \7Pas de tonalité. Vérifiez votre ligne téléphonique!\7 exit 1 ; local variables: