diff --git a/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml b/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml index b01f4b1b35..baeeb71f44 100644 --- a/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml @@ -1,7 +1,7 @@ @@ -540,7 +540,7 @@ Local1 (10.20.30.1, 10.9.9.30) --> T1-GW (10.9.9.1) - Storage devices such as floppies and CD-ROM drives can be + Storage devices such as floppies and CDROM drives can be used by other machines on the network eliminating the need for extra hardware. @@ -738,7 +738,7 @@ nfs_client_flags="-n 4" - Have several machines on a network and share a CD-ROM or + Have several machines on a network and share a CDROM or floppy drive among them. This is cheaper and often more convenient. @@ -755,7 +755,7 @@ nfs_client_flags="-n 4" When you get to reinstalling FreeBSD on one of your machines, NFS is the way to go! Just pop your distribution - CD-ROM into your file server and away you go! + CDROM into your file server and away you go! @@ -3095,7 +3095,7 @@ dhcp_flags="" <filename>/etc/namedb/named.conf</filename> - // $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.51 2001/07/06 13:02:58 dd Exp $ + // $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.52 2001/07/13 22:44:03 murray Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy diff --git a/en_US.ISO8859-1/books/handbook/install/chapter.sgml b/en_US.ISO8859-1/books/handbook/install/chapter.sgml index 8a87fb7dfa..7fd6b5a4b6 100644 --- a/en_US.ISO8859-1/books/handbook/install/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/install/chapter.sgml @@ -1,7 +1,7 @@ @@ -79,21 +79,21 @@ You may need to prepare some floppy disks. These disks will be used to boot your computer in to the FreeBSD install process. This step is not necessary if you are - installing from CD-ROM, and your computer - supports booting from the CD-ROM. If you do not meet these + installing from CDROM, and your computer + supports booting from the CDROM. If you do not meet these requirements then you will need to create some floppies to boot from. If you are not sure whether your computer can boot from the - CD-ROM it does not hurt to try. Just insert the CD-ROM as + CDROM it does not hurt to try. Just insert the CDROM as normal and restart your computer. You might need to adjust some options in your BIOS so that your computer will try and boot - from the CD-ROM drive before the hard disk. + from the CDROM drive before the hard disk. - Even if you have the CD-ROM it might make sense for you to + Even if you have the CDROM it might make sense for you to download the files. There have been occasions where bugs in the FreeBSD installer have been discovered after the CDs have been released. When this happens the copies of the images on the FTP @@ -106,7 +106,7 @@ Acquire the boot floppy images These are files with a .flp - extension. If you have a CD-ROM release of FreeBSD then you + extension. If you have a CDROM release of FreeBSD then you will find the files in the floppies subdirectory. Alternatively, you can download the images from the fdimage. - If you are using the floppies from the CD-ROM, and your - CD-ROM is the E: drive then you would + If you are using the floppies from the CDROM, and your + CDROM is the E: drive then you would run this: E:\> tools\fdimage floppies\kern.flp A: @@ -166,7 +166,7 @@ file, replacing the floppy disk each time. Adjust the command line as necessary, depending on where you have placed the .flp files. If you do not have the - CD-ROM then fdimage can be downloaded from + CDROM then fdimage can be downloaded from the tools directory on the FreeBSD FTP site. @@ -856,7 +856,7 @@ access by the CDROM driver. WORM/CD-R/CD-RW writing support is provided by cdrecord, which is in the ports tree. - The following CD-ROM type systems are supported at this + The following CDROM type systems are supported at this time: @@ -923,7 +923,7 @@ - mcd - Mitsumi proprietary CD-ROM + mcd - Mitsumi proprietary CDROM interface (all models) @@ -1919,8 +1919,8 @@ DOS then we provide a tool to do this called fdimage. - If you are using the floppies from the CD-ROM, and - your CD-ROM is the E: drive then + If you are using the floppies from the CDROM, and + your CDROM is the E: drive then you would run this: E:\> tools\fdimage floppies\kern.flp A: @@ -1929,7 +1929,7 @@ file, replacing the floppy disk each time. Adjust the command line as necessary, depending on where you have placed the .flp files. If you do not - have the CD-ROM then fdimage can be + have the CDROM then fdimage can be downloaded from the tools directory on the FreeBSD FTP site. diff --git a/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml b/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml index 0723bd83b7..40b65ee30b 100644 --- a/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml @@ -1,7 +1,7 @@ @@ -717,7 +717,7 @@ export PATH Software - The following CD-ROMs have been used for + The following CDROMs have been used for SAP-installation: @@ -864,7 +864,7 @@ export PATH I used a dual processor board with 2 800MHz Pentium III processors, Adaptec 29160 Ultra160 SCSI adapter (for accessing - a 40/80 GB DLT tape drive and CD-ROM), Mylex AcelleRAID (2 + a 40/80 GB DLT tape drive and CDROM), Mylex AcelleRAID (2 channels, firmware 6.00-1-00 with 32MB RAM). To the Mylex Raid-controller are attached two 17GB hard discs (mirrored) and four 36GB hard discs (RAID level 5). @@ -1392,11 +1392,11 @@ options SEMUME=100 #number of UNDO keys Installing SAP R/3 - Preparing SAP CD-ROMs + Preparing SAP CDROMs - There are lots of CD-ROMs to mount and unmount during - installation. Assuming you have enough CD-ROM-drives, you - can just mount them all. I decided to copy the CD-ROM + There are lots of CDROMs to mount and unmount during + installation. Assuming you have enough CDROM-drives, you + can just mount them all. I decided to copy the CDROM contents to corresponding directories: /oracle/IDS/sapreorg/<cd-name> diff --git a/en_US.ISO8859-1/books/handbook/ports/chapter.sgml b/en_US.ISO8859-1/books/handbook/ports/chapter.sgml index 09b5192394..1e44de0950 100644 --- a/en_US.ISO8859-1/books/handbook/ports/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/ports/chapter.sgml @@ -1,7 +1,7 @@ @@ -259,7 +259,7 @@ ftp> exit If you don't have a source of local packages (such as a - FreeBSD CD-ROM set) then it will probably be easier to use the + FreeBSD CDROM set) then it will probably be easier to use the -r option to &man.pkg.add.1;. This will cause the utility to automatically determine the correct object format and release and then to fetch and install the package from an FTP site. @@ -273,7 +273,7 @@ ftp> exit Package files are distributed in .tgz format. You can find them at ftp://ftp.freebsd.org/ports/packages, - or on the FreeBSD CD-ROM distribution. Every CD on the + or on the FreeBSD CDROM distribution. Every CD on the FreeBSD 4-CD set (and PowerPak, etc) contains packages in the /packages directory. The layout of the packages is similar to that of the