s/role="directory"/class="directory"/ since the last instance is the

correct one.  I'm guilty of most of these wrong attributes.

en_US.ISO8859-1/books/handbook/config/chapter.sgml

@@ -352,7 +352,7 @@
 
     <para>Before the advent of rcNG, applications would drop a
       simple start up script into the
-      <filename role="directory">/usr/local/etc/rc.d</filename>
+      <filename class="directory">/usr/local/etc/rc.d</filename>
       directory which would be read by the system initialization
       scripts.  These scripts would then be executed during the latter
       stages of system start up.</para>
@@ -472,7 +472,7 @@ run_rc_command "$1"</programlisting>
 	with the &man.rcorder.8; utility and provide for easier
 	configuration via the <filename>rc.conf</filename> file.  In
 	essence, this script could even be placed in
-	<filename role="directory">/etc/rc.d</filename> directory.
+	<filename class="directory">/etc/rc.d</filename> directory.
 	Yet, that has the potential to upset the &man.mergemaster.8;
 	utility when used in conjunction with software upgrades.</para>
     </sect2>
@@ -2589,13 +2589,13 @@ device_probe_and_attach: cbb0 attach returned 12</screen>
 	provided an interpreter (<acronym>ACPI-CA</acronym>) that is
 	shared with Linux and NetBSD.  The path to the
 	<acronym>ACPI-CA</acronym> source code is
-	<filename role="directory">src/sys/contrib/dev/acpica</filename>.
+	<filename class="directory">src/sys/contrib/dev/acpica</filename>.
 	The glue code that allows <acronym>ACPI-CA</acronym> to work on
 	&os; is in
 	<filename>src/sys/dev/acpica/Osd</filename>.  Finally, drivers
 	that implement various <acronym>ACPI</acronym> devices are found
 	in
-	<filename role="directory">src/sys/dev/acpica</filename>.</para>
+	<filename class="directory">src/sys/dev/acpica</filename>.</para>
     </sect2>
 
     <sect2 id="ACPI-comprob">
@@ -2878,7 +2878,7 @@ hw.acpi.s4bios: 0</screen>
 acpi_dsdt_name="/boot/DSDT.aml"</programlisting>
 
 	<para>Be sure to copy your <filename>DSDT.aml</filename> to the
-	  <filename role="directory">/boot</filename> directory.</para>
+	  <filename class="directory">/boot</filename> directory.</para>
       </sect3>
     </sect2>
 
@@ -2915,7 +2915,7 @@ acpi_dsdt_name="/boot/DSDT.aml"</programlisting>
 make ACPI_DEBUG=1</userinput></screen>
 
       <para>Install <filename>acpi.ko</filename> in
-	<filename role="directory">/boot/kernel</filename> and add your
+	<filename class="directory">/boot/kernel</filename> and add your
 	desired level and layer to <filename>loader.conf</filename>.
 	This example enables debug messages for all
 	<acronym>ACPI-CA</acronym> components and all

en_US.ISO8859-1/books/handbook/disks/chapter.sgml

@@ -1531,7 +1531,7 @@ cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
 	create an image of the data before the burning process.</para>
 	
       <para>To burn onto a DVD+R or a DVD-R the data from the <filename
-	role="directory">/path/to/data</filename> directory, use the
+	class="directory">/path/to/data</filename> directory, use the
 	following command:</para>
 
       <screen>&prompt.root; <userinput>growisofs -dvd-compat -Z <replaceable>/dev/cd0</replaceable> -J -R <replaceable>/path/to/data</replaceable></userinput></screen>
@@ -1582,7 +1582,7 @@ cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
 	just burn it in the same way as for any image, see the
 	previous section for an example.  If you have made the DVD
 	authoring and the result is in, for example, the directory
-	<filename role="directory">/path/to/video</filename>, the
+	<filename class="directory">/path/to/video</filename>, the
 	following command should be used to burn the DVD-Video:</para>
 
       <screen>&prompt.root; <userinput>growisofs -Z <replaceable>/dev/cd0</replaceable> -dvd-video <replaceable>/path/to/video</replaceable></userinput></screen>

en_US.ISO8859-1/books/handbook/install/chapter.sgml

@@ -3452,9 +3452,9 @@ To change any of these settings later, edit /etc/rc.conf
 	option specifies the default <filename>log</filename> file;
 	however, when <literal>syslogd</literal> is used all log
 	activity will be sent to the system log daemon.  The
-	<filename role="directory">/host</filename> directory is used
+	<filename class="directory">/host</filename> directory is used
 	to mount an exported file system from a remote
-	host, while <filename role="directory">/net</filename>
+	host, while <filename class="directory">/net</filename>
 	directory is used to mount an exported file system from an
 	<acronym>IP</acronym> address.  The
 	<filename>/etc/amd.map</filename> file defines the default
@@ -5030,7 +5030,7 @@ Please press any key to reboot.</screen>
             <screen>&prompt.root; <userinput>mount /dev/fd0 /mnt</userinput></screen>
 
 	    <para>Now that you have the floppy mounted, you must
-	      change into the <filename role="directory">/mnt</filename> directory:</para>
+	      change into the <filename class="directory">/mnt</filename> directory:</para>
 
 	    <screen>&prompt.root; <userinput>cd /mnt</userinput></screen>
 

en_US.ISO8859-1/books/handbook/mac/chapter.sgml

@@ -1419,7 +1419,7 @@ test: biba/high</screen>
 
     <para>This is a summary of the <acronym>MLS</acronym>
       policy's features.  Another approach is to create a master policy
-      file in <filename role="directory">/etc</filename> which
+      file in <filename class="directory">/etc</filename> which
       specifies the <acronym>MLS</acronym> policy information and to
       feed that file into the <command>setfmac</command> command.  This
       method will be explained after all policies are covered.</para>
@@ -2141,7 +2141,7 @@ XXX
 	  <para>Double-check the label policies.  Ensure that the
 	    policies are set correctly for the user in question, the
 	    &xfree86; application, and
-	    the <filename role="directory">/dev</filename>
+	    the <filename class="directory">/dev</filename>
 	    entries.</para>
 	</step>
 

en_US.ISO8859-1/books/handbook/mail/chapter.sgml

@@ -1792,7 +1792,7 @@ sasl_pwcheck_program="/usr/local/sbin/pwcheck"</programlisting>
       <screen>&prompt.user; <userinput>mail</userinput></screen>
 
       <para>The contents of the user mailbox in
-	<filename role="directory">/var/mail</filename> are
+	<filename class="directory">/var/mail</filename> are
 	automatically read by the <command>mail</command> utility.
 	Should the mailbox be empty, the utility exits with a
 	message indicating that no mails could be found.  Once the
@@ -1930,7 +1930,7 @@ EOT</screen>
 
       <para><application>mutt</application> will automatically read the
 	contents of the user mailbox in <filename
-	role="directory">/var/mail</filename> and display the contents
+	class="directory">/var/mail</filename> and display the contents
 	if applicable.  If no mails are found in the user mailbox, then
 	<application>mutt</application> will wait for commands from the
 	user.  The example below shows <application>mutt</application>
@@ -2041,7 +2041,7 @@ EOT</screen>
 	specific to the task at hand are shown.</para>
 
       <para>The default directory opened by <application>pine</application>
-	is the <filename role="directory">inbox</filename>.  To view the message index, press
+	is the <filename class="directory">inbox</filename>.  To view the message index, press
 	<keycap>I</keycap>, or select the <guimenuitem>MESSAGE INDEX</guimenuitem>
 	option as seen below:</para>
 

en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml

@@ -2446,12 +2446,12 @@ doc/zh_*</screen>
 	  Information</ulink> and
         <ulink url="&url.articles.releng;/release-proc.html">Release
 	  Process</ulink> documents.
-	The <filename role="directory">src</filename> tree uses tag names that
+	The <filename class="directory">src</filename> tree uses tag names that
 	start with <literal>RELENG_</literal> tags.
-	The <filename role="directory">ports</filename> and
+	The <filename class="directory">ports</filename> and
-	<filename role="directory">doc</filename> trees use tags whose names
+	<filename class="directory">doc</filename> trees use tags whose names
 	begin with <literal>RELEASE</literal> tags.
-	Finally, the <filename role="directory">www</filename> tree is not
+	Finally, the <filename class="directory">www</filename> tree is not
 	tagged with any special name for releases.</para>
 
     <variablelist>

en_US.ISO8859-1/books/handbook/multimedia/chapter.sgml

@@ -1001,7 +1001,7 @@ no adaptors present</screen>
 
       <listitem>
         <para>Documentation is not installed with the port and can be
-          found either on the web or under the port's <filename role='directory'>work</filename>
+          found either on the web or under the port's <filename class='directory'>work</filename>
           directory.</para>
       </listitem>
 
@@ -1724,7 +1724,7 @@ device `snapscan:/dev/pass3' is a AGFA SNAPSCAN 600 flatbed scanner</screen>
 	identify the scanner.  If this happens, you will need to edit
 	the backend configuration file and define the scanner device
 	used.  The <filename
-	role="directory">/usr/local/etc/sane.d/</filename> directory
+	class="directory">/usr/local/etc/sane.d/</filename> directory
 	contains all backends configuration files.  This
 	identification problem does appear with certain USB
 	scanners.</para>

en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml

@@ -4049,7 +4049,7 @@ zone "10.168.192.in-addr.arpa" in {
 
     <para>Configuration files for <command>named</command> currently
       reside in
-      <filename role="directory">/var/named/etc/namedb/</filename> and
+      <filename class="directory">/var/named/etc/namedb/</filename> and
       will need modification before use.  This is where most of the
       configuration will be performed.</para>
 
@@ -4057,13 +4057,13 @@ zone "10.168.192.in-addr.arpa" in {
       <title>Configuration of a Master Zone</title>
 
       <para>To configure a master zone visit
-	<filename role="directory">/var/named/etc/namedb/</filename>
+	<filename class="directory">/var/named/etc/namedb/</filename>
 	and run the following command:</para>
 
       <screen>&prompt.root; <userinput>sh make-localhost</userinput></screen>
 
       <para>If all went well a new file should exist in the
-	<filename role="directory">master</filename> directory.  The
+	<filename class="directory">master</filename> directory.  The
 	filenames should be <filename>localhost.rev</filename> for
 	the local domain name and <filename>localhost-v6.rev</filename>
 	for <acronym>IPv6</acronym> configurations.  As the default
@@ -4077,7 +4077,7 @@ zone "10.168.192.in-addr.arpa" in {
       <para>Configuration for extra domains or sub domains may be
 	done properly by setting them as a slave zone.  In most cases,
 	the <filename>master/localhost.rev</filename> could just be
-	copied over into the <filename role="directory">slave</filename>
+	copied over into the <filename class="directory">slave</filename>
 	directory and modified.  Once completed, the files need
 	to be properly added in <filename>named.conf</filename> such
 	as in the following configuration for
@@ -4256,10 +4256,10 @@ zone "0.168.192.in-addr.arpa" {
 	  <listitem>
 	    <para>This specifies the default directory hierarchy for
 	    the <application>Apache</application> installation.  Binaries are stored in the
-	    <filename role="directory">bin</filename> and 
+	    <filename class="directory">bin</filename> and 
-	    <filename role="directory">sbin</filename> subdirectories
+	    <filename class="directory">sbin</filename> subdirectories
 	    of the server root, and configuration files are stored in
-	    <filename role="directory">etc/apache</filename>.</para>
+	    <filename class="directory">etc/apache</filename>.</para>
 	  </listitem>
 	</varlistentry>
 

en_US.ISO8859-1/books/handbook/printing/chapter.sgml

@@ -1395,7 +1395,7 @@ bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:\
 	  <note>
 	    <para>A copy of the <filename>if-simple</filename> script
 	      can be found in the <filename
-	      role="directory">/usr/share/examples/printing</filename>
+	      class="directory">/usr/share/examples/printing</filename>
 	      directory.</para>
 	  </note>
 	</sect4>
@@ -1588,7 +1588,7 @@ $%&amp;'()*+,-./01234567
       <note>
 	<para>A copy of the various scripts described below can be
 	  found in the <filename
-	  role="directory">/usr/share/examples/printing</filename>
+	  class="directory">/usr/share/examples/printing</filename>
 	  directory.</para>
       </note>
 

en_US.ISO8859-1/books/handbook/security/chapter.sgml

@@ -5851,7 +5851,7 @@ An optional company name []:<userinput><replaceable>Another Name</replaceable></
 	authority signature file, <filename>myca.key</filename> and the
 	certificate itself, <filename>new.crt</filename>.  These should
 	be placed in a directory, preferably under
-	<filename role="directory">/etc</filename>, which is readable
+	<filename class="directory">/etc</filename>, which is readable
 	only by <username>root</username>.  Permissions of 0700 should be fine for this and
 	they can be set with the <command>chmod</command>
 	utility.</para>
@@ -5884,13 +5884,13 @@ define(`confSERVER_CERT',`/etc/certs/new.crt')dnl
 define(`confSERVER_KEY',`/etc/certs/myca.key')dnl
 define(`confTLS_SRV_OPTIONS', `V')dnl</programlisting>
 
-      <para>Where <filename role="directory">/etc/certs/</filename>
+      <para>Where <filename class="directory">/etc/certs/</filename>
 	is the directory to be used for storing the certificate
 	and key files locally.  The last few requirements are a rebuild
 	of the local <filename>.cf</filename> file.  This is easily
 	achieved by typing <command>make</command>
 	<parameter>install</parameter> within the
-	<filename role="directory">/etc/mail</filename>
+	<filename class="directory">/etc/mail</filename>
 	directory.  Follow that up with <command>make</command>
 	<parameter>restart</parameter> which should start the
 	<application>Sendmail</application> daemon.</para>