From 5f4604263754e45d6b215fe21551f95f97874f88 Mon Sep 17 00:00:00 2001 From: Nik Clayton Date: Tue, 9 Jun 1998 08:28:03 +0000 Subject: [PATCH] Replace `` '' with ... where appropriate. --- en/handbook/README | 3 +++ en/handbook/handbook.sgml | 16 ++++++++-------- en_US.ISO8859-1/books/handbook/book.sgml | 16 ++++++++-------- en_US.ISO_8859-1/books/handbook/book.sgml | 16 ++++++++-------- 4 files changed, 27 insertions(+), 24 deletions(-) diff --git a/en/handbook/README b/en/handbook/README index 5d575ae1b0..29d7fa5852 100644 --- a/en/handbook/README +++ b/en/handbook/README @@ -183,3 +183,6 @@ for example, Not all the `` '' pairs were changed, since in some cases they delimit filenames, options and so on. + 8. As with change 7, but replace with ... as + necessary. + diff --git a/en/handbook/handbook.sgml b/en/handbook/handbook.sgml index c925147b5c..53ded38c5c 100644 --- a/en/handbook/handbook.sgml +++ b/en/handbook/handbook.sgml @@ -600,7 +600,7 @@ makes it much easier for us to update ports, and greatly reduces the disk space demands made by the older 1.0 ports collection. To compile a port, you simply change to the directory of the program - you wish to install, type ``make all'' followed by ``make install'' + you wish to install, type make all followed by make install after successful compilation and let the system do the rest. The full original distribution for each port you build is retrieved dynamically off the CDROM or a local ftp site, so you need only @@ -1604,8 +1604,8 @@ installation process. You will need to know how to dial your ISP using the AT commands specific to your modem, as the PPP dialer provides only a very simple terminal emulator. If you're - using PAP or CHAP, you'll need to type the necessary ``set - authname'' and ``set authkey'' commands before typing ``term''. + using PAP or CHAP, you'll need to type the necessary set + authname and set authkey commands before typing term. Refer to the user-ppp and FAQ entries for further information. If you have problems, logging can be @@ -4800,7 +4800,7 @@ config: line 17: syntax error you can skip to the problem in vi by typing ``17G'' in command mode. + remap=tt>vi by typing 17G in command mode. Make sure the keyword is typed correctly, by comparing it to the GENERIC kernel or another reference. @@ -20372,7 +20372,7 @@ - and then ``dial provider'' to start the PPP session, or, if + and then dial provider to start the PPP session, or, if you want ppp to establish sessions automatically when there is outbound traffic (and you haven't created the start_if.tun0 script), type @@ -30531,7 +30531,7 @@ However, please do not import FREEBSD-upgrade with the contributed source. - Rather you should ``cvs add FREEBSD-upgrade ; cvs ci'' after the + Rather you should cvs add FREEBSD-upgrade ; cvs ci after the initial import. Example wording from ``src/contrib/cpio'' is below: @@ -31286,9 +31286,9 @@ - Every time you type ``gdb'', the mode will be toggled between + Every time you type gdb, the mode will be toggled between remote GDB and local DDB. In order to force a next trap - immediately, simply type ``s'' (step). Your hosting GDB will now + immediately, simply type s (step). Your hosting GDB will now gain control over the target kernel: Remote debugging using /dev/cuaa0 Debugger (msg=0xf01b0383 diff --git a/en_US.ISO8859-1/books/handbook/book.sgml b/en_US.ISO8859-1/books/handbook/book.sgml index c925147b5c..53ded38c5c 100644 --- a/en_US.ISO8859-1/books/handbook/book.sgml +++ b/en_US.ISO8859-1/books/handbook/book.sgml @@ -600,7 +600,7 @@ makes it much easier for us to update ports, and greatly reduces the disk space demands made by the older 1.0 ports collection. To compile a port, you simply change to the directory of the program - you wish to install, type ``make all'' followed by ``make install'' + you wish to install, type make all followed by make install after successful compilation and let the system do the rest. The full original distribution for each port you build is retrieved dynamically off the CDROM or a local ftp site, so you need only @@ -1604,8 +1604,8 @@ installation process. You will need to know how to dial your ISP using the AT commands specific to your modem, as the PPP dialer provides only a very simple terminal emulator. If you're - using PAP or CHAP, you'll need to type the necessary ``set - authname'' and ``set authkey'' commands before typing ``term''. + using PAP or CHAP, you'll need to type the necessary set + authname and set authkey commands before typing term. Refer to the user-ppp and FAQ entries for further information. If you have problems, logging can be @@ -4800,7 +4800,7 @@ config: line 17: syntax error you can skip to the problem in vi by typing ``17G'' in command mode. + remap=tt>vi by typing 17G in command mode. Make sure the keyword is typed correctly, by comparing it to the GENERIC kernel or another reference. @@ -20372,7 +20372,7 @@ - and then ``dial provider'' to start the PPP session, or, if + and then dial provider to start the PPP session, or, if you want ppp to establish sessions automatically when there is outbound traffic (and you haven't created the start_if.tun0 script), type @@ -30531,7 +30531,7 @@ However, please do not import FREEBSD-upgrade with the contributed source. - Rather you should ``cvs add FREEBSD-upgrade ; cvs ci'' after the + Rather you should cvs add FREEBSD-upgrade ; cvs ci after the initial import. Example wording from ``src/contrib/cpio'' is below: @@ -31286,9 +31286,9 @@ - Every time you type ``gdb'', the mode will be toggled between + Every time you type gdb, the mode will be toggled between remote GDB and local DDB. In order to force a next trap - immediately, simply type ``s'' (step). Your hosting GDB will now + immediately, simply type s (step). Your hosting GDB will now gain control over the target kernel: Remote debugging using /dev/cuaa0 Debugger (msg=0xf01b0383 diff --git a/en_US.ISO_8859-1/books/handbook/book.sgml b/en_US.ISO_8859-1/books/handbook/book.sgml index c925147b5c..53ded38c5c 100644 --- a/en_US.ISO_8859-1/books/handbook/book.sgml +++ b/en_US.ISO_8859-1/books/handbook/book.sgml @@ -600,7 +600,7 @@ makes it much easier for us to update ports, and greatly reduces the disk space demands made by the older 1.0 ports collection. To compile a port, you simply change to the directory of the program - you wish to install, type ``make all'' followed by ``make install'' + you wish to install, type make all followed by make install after successful compilation and let the system do the rest. The full original distribution for each port you build is retrieved dynamically off the CDROM or a local ftp site, so you need only @@ -1604,8 +1604,8 @@ installation process. You will need to know how to dial your ISP using the AT commands specific to your modem, as the PPP dialer provides only a very simple terminal emulator. If you're - using PAP or CHAP, you'll need to type the necessary ``set - authname'' and ``set authkey'' commands before typing ``term''. + using PAP or CHAP, you'll need to type the necessary set + authname and set authkey commands before typing term. Refer to the user-ppp and FAQ entries for further information. If you have problems, logging can be @@ -4800,7 +4800,7 @@ config: line 17: syntax error you can skip to the problem in vi by typing ``17G'' in command mode. + remap=tt>vi by typing 17G in command mode. Make sure the keyword is typed correctly, by comparing it to the GENERIC kernel or another reference. @@ -20372,7 +20372,7 @@ - and then ``dial provider'' to start the PPP session, or, if + and then dial provider to start the PPP session, or, if you want ppp to establish sessions automatically when there is outbound traffic (and you haven't created the start_if.tun0 script), type @@ -30531,7 +30531,7 @@ However, please do not import FREEBSD-upgrade with the contributed source. - Rather you should ``cvs add FREEBSD-upgrade ; cvs ci'' after the + Rather you should cvs add FREEBSD-upgrade ; cvs ci after the initial import. Example wording from ``src/contrib/cpio'' is below: @@ -31286,9 +31286,9 @@ - Every time you type ``gdb'', the mode will be toggled between + Every time you type gdb, the mode will be toggled between remote GDB and local DDB. In order to force a next trap - immediately, simply type ``s'' (step). Your hosting GDB will now + immediately, simply type s (step). Your hosting GDB will now gain control over the target kernel: Remote debugging using /dev/cuaa0 Debugger (msg=0xf01b0383