os/doc
3
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Mentioned that a disk with bad blocks and sector remapping on is

Browse source 
probably due for replacement.
Added a note to Q 4.5 that some NE2000 cards report timeouts when
  there is no link on the UTP port.

Submitted by: Doug White <dwhite@gdi.uoregon.edu>
This commit is contained in:
Jordan K. Hubbard 1998-05-19 01:48:11 +00:00
parent 6d48a3a8d7
commit 6b6a33f581
Notes: svn2git 2020-12-08 03:00:23 +00:00 
svn path=/head/; revision=2825
1 changed files with 10 additions and 3 deletions

13
FAQ/troubleshoot.sgml
View file

@ -1,4 +1,4 @@
<!-- $Id: troubleshoot.sgml,v 1.2 1997-12-31 21:51:56 obrien Exp $ --> <!-- $Id: troubleshoot.sgml,v 1.3 1998-05-19 01:48:11 jkh Exp $ -->
<!-- The FreeBSD Documentation Project --> <!-- The FreeBSD Documentation Project -->
<sect> <sect>
@ -39,6 +39,10 @@
to see if this feature has been disabled on your drive. However, to see if this feature has been disabled on your drive. However,
ESDI, RLL, and ST-506 drives normally do not do this. ESDI, RLL, and ST-506 drives normally do not do this.
<p>If remapping is enabled and you are seeing bad blocks, consider
replacing the drive. The bad blocks will only get worse as time
goes on.
<sect1> <sect1>
<heading>FreeBSD does not recognize my Bustek 742a EISA SCSI!</heading> <heading>FreeBSD does not recognize my Bustek 742a EISA SCSI!</heading>
@ -98,7 +102,7 @@
range clash :), by bumping the kernel option <tt/EISA_SLOTS/ range clash :), by bumping the kernel option <tt/EISA_SLOTS/
to a value of 12. to a value of 12.
Configure and compile a kernel, as described in the Configure and compile a kernel, as described in the
<url url="http://www.freebsd.org/handbook/kernelconfig.html" <url url="../handbook/kernelconfig.html"
name="Handbook entry on configuring the kernel">. name="Handbook entry on configuring the kernel">.
<p>Of course, this does present you with a chicken-and-egg problem when <p>Of course, this does present you with a chicken-and-egg problem when
@ -152,7 +156,10 @@
<p>If you're using the BNC connector on your network card, you may <p>If you're using the BNC connector on your network card, you may
also see device timeouts because of bad termination. To check this, also see device timeouts because of bad termination. To check this,
attach a terminator directly to the NIC (with no cabel) and see if attach a terminator directly to the NIC (with no cabel) and see if
the error messages go away. the error messages go away.
<p>Some NE2000 compatible cards will give this error if there is
no link on the UTP port or if the cable is disconnected.
<sect1> <sect1>
<heading>When I mount a CDROM, I get ``Incorrect super block''.</heading> <heading>When I mount a CDROM, I get ``Incorrect super block''.</heading>