diff --git a/en_US.ISO8859-1/articles/formatting-media/article.sgml b/en_US.ISO8859-1/articles/formatting-media/article.sgml index 6c546923f6..e9302ea61d 100644 --- a/en_US.ISO8859-1/articles/formatting-media/article.sgml +++ b/en_US.ISO8859-1/articles/formatting-media/article.sgml @@ -2,7 +2,7 @@ %man; ]> - +
Formatting Media For Use With FreeBSD @@ -91,7 +91,7 @@ Definitions - UNIX disk management over the centuries has invented many + Unix disk management over the centuries has invented many new definitions for old words. The following glossary covers the definitions used in this document and (hopefully) for FreeBSD in general. @@ -118,7 +118,7 @@ now. --> similarly manipulable material, spun by a motor under a head. Data is stored on the disk by changing the pattern of magnetism on the disc, which can be later read. Hard - disks, CD-ROMs, Magneto-optical,and Zip/Jaz removables are + disks, CDROMs, Magneto-optical,and Zip/Jaz removables are examples of disks. diff --git a/en_US.ISO8859-1/articles/freebsd-questions/article.sgml b/en_US.ISO8859-1/articles/freebsd-questions/article.sgml index 063e52243e..77ad87601e 100644 --- a/en_US.ISO8859-1/articles/freebsd-questions/article.sgml +++ b/en_US.ISO8859-1/articles/freebsd-questions/article.sgml @@ -17,7 +17,7 @@ - $FreeBSD: doc/en_US.ISO8859-1/articles/freebsd-questions/article.sgml,v 1.3 2001/07/10 14:00:14 dd Exp $ + $FreeBSD: doc/en_US.ISO8859-1/articles/freebsd-questions/article.sgml,v 1.4 2001/07/13 16:34:19 nik Exp $ This document provides useful information for people looking to @@ -401,10 +401,10 @@ so why don't y9ou guys tell me what I doing wrong. Subject: Problems installing FreeBSD -I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot +I've just got the FreeBSD 2.1.5 CDROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball -disk and a Toshiba 3501XA CD-ROM drive. The installation works just +disk and a Toshiba 3501XA CDROM drive. The installation works just fine, but when I try to reboot the system, I get the message ``Missing Operating System''. @@ -489,7 +489,7 @@ fine, but when I try to reboot the system, I get the message If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, I don't know if this is correct, but since nobody else has - replied, why don't you try replacing your ATAPI CD-ROM with + replied, why don't you try replacing your ATAPI CDROM with a frog?. diff --git a/en_US.ISO8859-1/articles/ipsec-must/article.sgml b/en_US.ISO8859-1/articles/ipsec-must/article.sgml index 912364faf1..b51bc1d876 100644 --- a/en_US.ISO8859-1/articles/ipsec-must/article.sgml +++ b/en_US.ISO8859-1/articles/ipsec-must/article.sgml @@ -103,7 +103,7 @@ Expected value for L=8 is 7.1836656

This experiment shows that IPsec does seem to be distributing the payload data uniformly, as encryption should. However, the - experiment described here can not detect many possible flaws in a + experiment described here cannot detect many possible flaws in a system (none of which do I have any evidence for). These include poor key generation or exchange, data or keys being visible to others, use of weak algorithms, kernel subversion, etc. Study the source; know the diff --git a/en_US.ISO8859-1/articles/mh/article.sgml b/en_US.ISO8859-1/articles/mh/article.sgml index b5f896203e..91025e8ff1 100644 --- a/en_US.ISO8859-1/articles/mh/article.sgml +++ b/en_US.ISO8859-1/articles/mh/article.sgml @@ -1,4 +1,4 @@ - + @@ -344,7 +344,7 @@ which I am probably the guilty party). into your inbox directory with a file name that is equivalent to the message number. So even if you didn't have any of the MH tools to read your email you could still use - standard UNIX commands to munge around in those directories and + standard Unix commands to munge around in those directories and just more your files. It's this simplicity that really gives you a lot of power with what you can do with your email. diff --git a/en_US.ISO8859-1/articles/multi-os/article.sgml b/en_US.ISO8859-1/articles/multi-os/article.sgml index a5da9b13a9..c04c9ee501 100644 --- a/en_US.ISO8859-1/articles/multi-os/article.sgml +++ b/en_US.ISO8859-1/articles/multi-os/article.sgml @@ -1,4 +1,4 @@ - +

@@ -46,7 +46,7 @@ repartition your hard drive, you run the risk of destroying the data on the original partitions. However, if your hard drive is completely occupied by DOS, you might find the FIPS utility - (included on the FreeBSD CD-ROM in the + (included on the FreeBSD CDROM in the \TOOLS directory or via ftp) useful. It lets you repartition your hard disk without @@ -276,7 +276,7 @@ Press Esc to continue destroy the MBR, and you will have to reinstall your previous boot manager. Boot Easy can be reinstalled by using the BOOTINST.EXE utility included in the \TOOLS directory on the - CD-ROM, and via ftp. You can also re-start the installation process and go to the partition editor. From there, mark the FreeBSD partition as diff --git a/en_US.ISO8859-1/articles/new-users/article.sgml b/en_US.ISO8859-1/articles/new-users/article.sgml index 90bccba82d..dbff31d29d 100644 --- a/en_US.ISO8859-1/articles/new-users/article.sgml +++ b/en_US.ISO8859-1/articles/new-users/article.sgml @@ -1,4 +1,4 @@ - + @@ -787,7 +787,7 @@ them (get the package if it exists, with pkg_add /cdrom/packages/All/packagename, where packagename is the filename of the - package). The cdrom has lists of the packages and ports with + package). The CDROM has lists of the packages and ports with brief descriptions in cdrom/packages/index, cdrom/packages/index.txt, and cdrom/ports/index, with fuller descriptions @@ -796,11 +796,11 @@ programs and program names respectively. If you find the handbook too sophisticated (what with - lndir and all) on installing ports from the cdrom, + lndir and all) on installing ports from the CDROM, here's what usually works: Find the port you want, say kermit. There will - be a directory for it on the cdrom. Copy the subdirectory to + be a directory for it on the CDROM. Copy the subdirectory to /usr/local (a good place for software you add that should be available to all users) with: @@ -831,7 +831,7 @@ During this process the port will ftp to get any compressed - files it needs that it didn't find on the cdrom or in + files it needs that it didn't find on the CDROM or in /usr/ports/distfiles. If you don't have your network running yet and there was no file for the port in /cdrom/ports/distfiles, you will have to @@ -1004,13 +1004,13 @@ setenv XNLSPATH /usr/X11R6/lib/X11/nls insert another one, and mount it with /sbin/mount_cd9660 /dev/cd0a /cdrom assuming cd0a is the device name for your CDROM drive. The - most recent versions of FreeBSD let you mount the cdrom with + most recent versions of FreeBSD let you mount the CDROM with just /sbin/mount /cdrom. Using the live file system—the second of FreeBSD's CDROM disks—is useful if you've got limited space. What is on the live file system varies from release to release. You - might try playing games from the cdrom. This involves using + might try playing games from the CDROM. This involves using lndir, which gets installed with the X Window System, to tell the program(s) where to find the necessary files, because they're in the /cdrom file diff --git a/en_US.ISO8859-1/articles/vm-design/article.sgml b/en_US.ISO8859-1/articles/vm-design/article.sgml index ad0b7c8c9a..f932c5eb47 100644 --- a/en_US.ISO8859-1/articles/vm-design/article.sgml +++ b/en_US.ISO8859-1/articles/vm-design/article.sgml @@ -1,4 +1,4 @@ - + - But in the UNIX world you are dealing with virtual address + But in the Unix world you are dealing with virtual address spaces, not physical address spaces. Any program you write will see the virtual address space given to it. The actual physical pages underlying that virtual diff --git a/en_US.ISO8859-1/articles/zip-drive/article.sgml b/en_US.ISO8859-1/articles/zip-drive/article.sgml index 4e1aeeacaa..a13c8430c1 100644 --- a/en_US.ISO8859-1/articles/zip-drive/article.sgml +++ b/en_US.ISO8859-1/articles/zip-drive/article.sgml @@ -112,7 +112,7 @@ IDE devices in FreeBSD are prefixed with a w. For example, an IDE hard disk might be - /dev/wd0, an IDE (ATAPI) cdrom might be + /dev/wd0, an IDE (ATAPI) CDROM might be /dev/wcd1, and so on. diff --git a/en_US.ISO8859-1/books/arch-handbook/isa/chapter.sgml b/en_US.ISO8859-1/books/arch-handbook/isa/chapter.sgml index c68a55d85c..96f68a88c5 100644 --- a/en_US.ISO8859-1/books/arch-handbook/isa/chapter.sgml +++ b/en_US.ISO8859-1/books/arch-handbook/isa/chapter.sgml @@ -1,7 +1,7 @@ @@ -1711,7 +1711,7 @@ - As for any other bus, if the device can not be detected or + As for any other bus, if the device cannot be detected or is detected but failed the self-test or some other problem happened then it returns a positive value of error. The value ENXIO must be returned if the device is not diff --git a/en_US.ISO8859-1/books/arch-handbook/scsi/chapter.sgml b/en_US.ISO8859-1/books/arch-handbook/scsi/chapter.sgml index 72ee58a453..072aea5499 100644 --- a/en_US.ISO8859-1/books/arch-handbook/scsi/chapter.sgml +++ b/en_US.ISO8859-1/books/arch-handbook/scsi/chapter.sgml @@ -1,7 +1,7 @@ @@ -1865,7 +1865,7 @@ ahc_async(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)< CAM_RESRC_UNAVAIL - some - resource is temporarily unavailable and the SIM driver can not + resource is temporarily unavailable and the SIM driver cannot generate an event when it will become available. An example of this resource would be some intra-controller hardware resource for which the controller does not generate an interrupt when diff --git a/en_US.ISO8859-1/books/developers-handbook/ipv6/chapter.sgml b/en_US.ISO8859-1/books/developers-handbook/ipv6/chapter.sgml index 2c1519e6b4..b7a44cc989 100644 --- a/en_US.ISO8859-1/books/developers-handbook/ipv6/chapter.sgml +++ b/en_US.ISO8859-1/books/developers-handbook/ipv6/chapter.sgml @@ -1,7 +1,7 @@ @@ -788,7 +788,7 @@ fe80:2::%ep0/64 link#2 UC ep0 Applications For userland programming, we support IPv6 socket API as - specified in RFC2553, RFC2292 and upcoming internet drafts. + specified in RFC2553, RFC2292 and upcoming Internet drafts. TCP/UDP over IPv6 is available and quite stable. You can enjoy &man.telnet.1;, &man.ftp.1;, &man.rlogin.1;, &man.rsh.1;, diff --git a/en_US.ISO8859-1/books/developers-handbook/isa/chapter.sgml b/en_US.ISO8859-1/books/developers-handbook/isa/chapter.sgml index c68a55d85c..96f68a88c5 100644 --- a/en_US.ISO8859-1/books/developers-handbook/isa/chapter.sgml +++ b/en_US.ISO8859-1/books/developers-handbook/isa/chapter.sgml @@ -1,7 +1,7 @@ @@ -1711,7 +1711,7 @@ - As for any other bus, if the device can not be detected or + As for any other bus, if the device cannot be detected or is detected but failed the self-test or some other problem happened then it returns a positive value of error. The value ENXIO must be returned if the device is not diff --git a/en_US.ISO8859-1/books/developers-handbook/scsi/chapter.sgml b/en_US.ISO8859-1/books/developers-handbook/scsi/chapter.sgml index 72ee58a453..072aea5499 100644 --- a/en_US.ISO8859-1/books/developers-handbook/scsi/chapter.sgml +++ b/en_US.ISO8859-1/books/developers-handbook/scsi/chapter.sgml @@ -1,7 +1,7 @@ @@ -1865,7 +1865,7 @@ ahc_async(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)< CAM_RESRC_UNAVAIL - some - resource is temporarily unavailable and the SIM driver can not + resource is temporarily unavailable and the SIM driver cannot generate an event when it will become available. An example of this resource would be some intra-controller hardware resource for which the controller does not generate an interrupt when diff --git a/en_US.ISO8859-1/books/developers-handbook/secure/chapter.sgml b/en_US.ISO8859-1/books/developers-handbook/secure/chapter.sgml index 4657f5ddd5..80bb0de490 100644 --- a/en_US.ISO8859-1/books/developers-handbook/secure/chapter.sgml +++ b/en_US.ISO8859-1/books/developers-handbook/secure/chapter.sgml @@ -1,7 +1,7 @@ @@ -426,7 +426,7 @@ int main() { running applications in a secure environment but it does have some shortcomings. Currently, the IPC mechanisms have not been converted to the suser_xxx so applications - such as MySQL can not be run within a jail. Superuser access + such as MySQL cannot be run within a jail. Superuser access may have a very limited meaning within a jail, but there is no way to specify exactly what "very limited" means. diff --git a/en_US.ISO8859-1/books/faq/book.sgml b/en_US.ISO8859-1/books/faq/book.sgml index a1311a79d8..76487ff398 100644 --- a/en_US.ISO8859-1/books/faq/book.sgml +++ b/en_US.ISO8859-1/books/faq/book.sgml @@ -17,7 +17,7 @@ The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/faq/book.sgml,v 1.243 2001/07/06 13:02:56 dd Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/faq/book.sgml,v 1.244 2001/07/10 14:39:25 nik Exp $ 1995 @@ -1122,7 +1122,7 @@ File: +DESC (ignored) 2.2, need at least 5MB to install on a new system. All versions of FreeBSD, including 3.0, will - run in 4MB of RAM, they just can not run the + run in 4MB of RAM, they just cannot run the installation program in 4MB. You can add extra memory for the install process, if you like, and then after the system is up and running, go back to 4MB. Or you could always just swap your @@ -1232,9 +1232,9 @@ File: +DESC (ignored) - Boot the FreeBSD boot floppy (or CD-ROM) and choose the + Boot the FreeBSD boot floppy (or CDROM) and choose the Fixit menu item. Select either the Fixit - floppy or CD-ROM #2 (the live file system + floppy or CDROM #2 (the live file system option) as appropriate and enter the fixit shell. Then execute the following command: @@ -1468,21 +1468,21 @@ File: +DESC (ignored) - I booted from my ATAPI CD-ROM, but the install program says no - CD-ROM is found. Where did it go? + I booted from my ATAPI CDROM, but the install program says no + CDROM is found. Where did it go? - The usual cause of this problem is a mis-configured CD-ROM - drive. Many PCs now ship with the CD-ROM as the slave device on + The usual cause of this problem is a mis-configured CDROM + drive. Many PCs now ship with the CDROM as the slave device on the secondary IDE controller, with no master device on that controller. This is illegal according to the ATAPI specification, but Windows plays fast and loose with the specification, and the BIOS ignores it when booting. This is why the BIOS was able to - see the CD-ROM to boot from it, but why FreeBSD can not see it to + see the CDROM to boot from it, but why FreeBSD cannot see it to complete the install. - Reconfigure your system so that the CD-ROM is either the + Reconfigure your system so that the CDROM is either the master device on the IDE controller it is attached to, or make sure that it is the slave on an IDE controller that also has a master device. @@ -1839,7 +1839,7 @@ BUSY The default password format on FreeBSD is to use MD5-based passwords. These are believed to - be more secure than the traditional UNIX password format, which + be more secure than the traditional Unix password format, which used a scheme based on the DES algorithm. DES passwords are still available if you need to share your password file with legacy operating systems which still use the @@ -2387,14 +2387,14 @@ Filesystem 1024-blocks Used Avail Capacity Mounted on - Which CD-ROM drives are supported by FreeBSD? + Which CDROM drives are supported by FreeBSD? Any SCSI drive connected to a supported controller is supported. - The following proprietary CD-ROM interfaces are also + The following proprietary CDROM interfaces are also supported: @@ -2408,15 +2408,15 @@ Filesystem 1024-blocks Used Avail Capacity Mounted on - Sound Blaster Non-SCSI CD-ROM + Sound Blaster Non-SCSI CDROM - Matsushita/Panasonic CD-ROM + Matsushita/Panasonic CDROM - ATAPI compatible IDE CD-ROMs + ATAPI compatible IDE CDROMs @@ -3008,7 +3008,7 @@ diff -u -r1.60.2.1 -r1.60.2.2 This is only for sound! This driver does not support - CD-ROMs, SCSI or joysticks on these cards, except for the + CDROMs, SCSI or joysticks on these cards, except for the SoundBlaster. The SoundBlaster SCSI interface and some non-SCSI CDROMS are supported, but you cannot boot off this device. @@ -3434,7 +3434,7 @@ quit this problem. - You can not use a + You cannot use a dangerously dedicated disk with an HP Netserver. See this note for more info. @@ -3536,8 +3536,8 @@ quit (ATAPI). It can take a couple of seconds for a CDROM drive to notice that it has been fed, so be patient. - Sometimes a SCSI CD-ROM may be missed because it had not - enough time to answer the bus reset. If you have a SCSI CD-ROM + Sometimes a SCSI CDROM may be missed because it had not + enough time to answer the bus reset. If you have a SCSI CDROM please try to add the following symbol into your kernel configuration file and recompile. @@ -6220,7 +6220,7 @@ options SYSVMSG # enable for messaging If you did not install your system with full sources, the sendmail config stuff has been broken out into a separate source distribution tarball just for you. Assuming you have got - your CD-ROM mounted, do: + your CDROM mounted, do: &prompt.root; cd /cdrom/src &prompt.root; cat scontrib.?? | tar xzf - -C /usr/src contrib/sendmail @@ -6348,12 +6348,12 @@ rewrite: ruleset 0 returns: $# uucp-dom $@ if-bus $: foo \ If you have got a statically assigned IP number, you should not need to adjust anything from the default. Set your host - name up as your assigned internet name and sendmail will do + name up as your assigned Internet name and sendmail will do the rest. If you have got a dynamically assigned IP number and use a dialup ppp connection to the - internet, you will probably be given a mailbox on your ISPs + Internet, you will probably be given a mailbox on your ISPs mail server. Lets assume your ISPs domain is myISP.com, and that your user name is user. Lets also assume you have @@ -6516,7 +6516,7 @@ define(`confDELIVERY_MODE',`deferred')dnl - How do I reformat DOS text files to UNIX ones? + How do I reformat DOS text files to Unix ones? @@ -6742,16 +6742,16 @@ define(`confDELIVERY_MODE',`deferred')dnl - UNIX implements two core sandboxes. One is at the + Unix implements two core sandboxes. One is at the process level, and one is at the userid level. - Every UNIX process is completely firewalled off from every - other UNIX process. One process can not modify the address + Every Unix process is completely firewalled off from every + other Unix process. One process cannot modify the address space of another. This is unlike Windows where a process can easily overwrite the address space of any other, leading to a crash. - A UNIX process is owned by a particular userid. If the + A Unix process is owned by a particular userid. If the userid is not the root user, it serves to firewall the process off from processes owned by other users. The userid is also used to firewall off on-disk data. @@ -6880,7 +6880,7 @@ define(`confDELIVERY_MODE',`deferred')dnl &prompt.root; chmod 666 /dev/fd0 To allow users in the group - operator to mount the cdrom drive, + operator to mount the CDROM drive, use: &prompt.root; chgrp operator /dev/cd0c @@ -6903,7 +6903,7 @@ define(`confDELIVERY_MODE',`deferred')dnl &prompt.user; mount -t msdos /dev/fd0 ~/my-mount-point Users in group operator can now - mount the cdrom /dev/cd0c onto a + mount the CDROM /dev/cd0c onto a directory that they own: &prompt.user; mkdir ~/my-mount-point @@ -8233,7 +8233,7 @@ Key F15 A A Menu Workplace Nop Internet provider (or even if you receive a dynamic IP number), you may want to look at the &man.natd.8; program. &man.natd.8; allows you to connect an - entire subnet to the internet using only a single IP + entire subnet to the Internet using only a single IP number. The &man.ppp.8; @@ -10673,7 +10673,7 @@ raisechar=^^ - If you are talking to another UNIX system, you can send + If you are talking to another Unix system, you can send and receive files with ~p (put) and ~t (take). These commands run &man.cat.1; and @@ -10789,7 +10789,7 @@ raisechar=^^ To understand why FreeBSD uses the ELF format, you must first know a little about the 3 currently dominant executable - formats for UNIX: + formats for Unix: Prior to FreeBSD 3.x, FreeBSD used the a.out @@ -11026,7 +11026,7 @@ raisechar=^^ which are trashed (due to variable-length records getting written when fixed records were expected), but it can break Suns NIS clients and potentially cause other problems in - interacting with other UNIX systems. + interacting with other Unix systems. In FreeBSD 3.0 and later, the maximum name length has been increased to 16 characters and those various utilities diff --git a/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml b/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml index 0f7a2f4f35..0147832960 100644 --- a/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml +++ b/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml @@ -27,7 +27,7 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml,v 1.25 2001/07/13 20:49:09 nik Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml,v 1.26 2001/07/15 11:17:05 nik Exp $ --> @@ -2115,7 +2115,7 @@ This is the file called 'foo2' There will often be times when you want to show the user what to do, or refer to a file, or command line, or similar, where the user - can not simply copy the examples that you provide, but must instead + cannot simply copy the examples that you provide, but must instead include some information themselves. replaceable is designed for this eventuality. @@ -2503,11 +2503,11 @@ IMAGES= chapter1/fig1.png title or the chapter number. - This means that you can not use + This means that you cannot use xref to link to an id attribute on an anchor element. The anchor has no content, so the - xref can not generate the text for the + xref cannot generate the text for the link. diff --git a/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml b/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml index b65fb4fb76..f464eb36cc 100644 --- a/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml +++ b/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml @@ -27,7 +27,7 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml,v 1.17 2001/04/17 16:16:19 nik Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml,v 1.18 2001/07/13 20:49:35 nik Exp $ --> @@ -76,7 +76,7 @@ and easily see which parts are filenames, which are commands to be typed in, which parts are references to manual pages, and so on. But the - computer processing the document can not. For this we need + computer processing the document cannot. For this we need markup. “Markup” is commonly used to describe “adding @@ -909,7 +909,7 @@ nsgmls:example.sgml:6:8:E: end tag for "HEAD" which is not finished General Entities - You can not use general entities in an SGML context (although you + You cannot use general entities in an SGML context (although you define them in one). They can only be used in your document. Contrast this with parameter @@ -932,7 +932,7 @@ nsgmls:example.sgml:6:8:E: end tag for "HEAD" which is not finished You can also use general entities to enter characters that you could not otherwise include in an SGML document. For example, < - and & can not normally appear in an SGML document. When the SGML + and & cannot normally appear in an SGML document. When the SGML parser sees the < symbol it assumes that a tag (either a start tag or an end tag) is about to appear, and when it sees the & symbol it assumes the next text will be the name of an entity. diff --git a/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml b/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml index aa432bd05c..c52f577af6 100644 --- a/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml @@ -1,7 +1,7 @@ @@ -11,7 +11,7 @@ Synopsis The following chapter will cover some of the more frequently - used network services on UNIX systems. This, of course, will + used network services on Unix systems. This, of course, will pertain to configuring said services on your FreeBSD system. @@ -3095,7 +3095,7 @@ dhcp_flags="" <filename>/etc/namedb/named.conf</filename> - // $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.56 2001/07/14 23:40:27 murray Exp $ + // $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.57 2001/07/17 00:11:17 chern Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy diff --git a/en_US.ISO8859-1/books/handbook/boot/chapter.sgml b/en_US.ISO8859-1/books/handbook/boot/chapter.sgml index 3d728b73c4..2ca621e59f 100644 --- a/en_US.ISO8859-1/books/handbook/boot/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/boot/chapter.sgml @@ -1,7 +1,7 @@ @@ -467,7 +467,7 @@ boot: The automatic reboot sequence makes sure that the filesystems available on the system are consistent. If they - are not, and fsck can not fix the + are not, and fsck cannot fix the inconsistencies, init drops the system into single-user mode for the system administrator to take care of the problems diff --git a/en_US.ISO8859-1/books/handbook/x11/chapter.sgml b/en_US.ISO8859-1/books/handbook/x11/chapter.sgml index 8d5b25fd1a..5040b09af4 100644 --- a/en_US.ISO8859-1/books/handbook/x11/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/x11/chapter.sgml @@ -1,7 +1,7 @@ @@ -1615,7 +1615,7 @@ EndSection You should now make a directory for your TrueType fonts (e.g. /usr/X11R6/lib/X11/fonts/TrueType) and copy all of your TrueType fonts into this directory. Keep in - mind that you can not take TrueType fonts directly from a + mind that you cannot take TrueType fonts directly from a Macintosh; they must be in Unix/DOS/Windows format for use by XFree86. Once you have copied the files into this directory you need to use diff --git a/en_US.ISO8859-1/books/porters-handbook/book.sgml b/en_US.ISO8859-1/books/porters-handbook/book.sgml index 2aedfa164d..622059a188 100644 --- a/en_US.ISO8859-1/books/porters-handbook/book.sgml +++ b/en_US.ISO8859-1/books/porters-handbook/book.sgml @@ -1,7 +1,7 @@ PACKAGE_BUILDING variable and turn off the interactive script when it is set. This will allow us to build the - packages for CD-ROMs and ftp. + packages for CDROMs and ftp. @@ -953,7 +953,7 @@ PORTEPOCH= 1 subdirectories are specified by the variable CATEGORIES. It is intended to make life easier for the user when he is wading through the pile of packages on the - ftp site or the CD-ROM. Please take a look at the existing categories and pick the ones that are suitable for your port. @@ -2267,7 +2267,7 @@ PLIST_SUB= OCTAVE_VERSION=${OCTAVE_VERSION} It is your responsibility as a porter to read the licensing terms of the software and make sure that the FreeBSD project will not be held accountable for violating them by redistributing the - source or compiled binaries either via ftp or CD-ROM. If in doubt, + source or compiled binaries either via ftp or CDROM. If in doubt, please contact the &a.ports;. @@ -2279,7 +2279,7 @@ PLIST_SUB= OCTAVE_VERSION=${OCTAVE_VERSION} If the port has a “do not sell for profit” type of license, set the variable NO_CDROM to a string describing the reason why. We will make sure such ports will not go - into the CD-ROM come release time. The distfile and package will + into the CDROM come release time. The distfile and package will still be available via ftp. @@ -2288,7 +2288,7 @@ PLIST_SUB= OCTAVE_VERSION=${OCTAVE_VERSION} site, or the resulting binary package cannot be distributed due to licensing; set the variable NO_PACKAGE to a string describing the reason why. We will make sure such packages - will not go on the ftp site, nor into the CD-ROM come release time. + will not go on the ftp site, nor into the CDROM come release time. The distfile will still be included on both however. @@ -2445,7 +2445,7 @@ PLIST_SUB= OCTAVE_VERSION=${OCTAVE_VERSION} Differentiating operating systems and OS versions You may come across code that needs modifications or conditional - compilation based upon what version of UNIX it is running under. If + compilation based upon what version of Unix it is running under. If you need to make such changes to the code for conditional compilation, make sure you make the changes as general as possible so that we can back-port code to FreeBSD 1.x systems and cross-port diff --git a/en_US.ISO8859-1/books/ppp-primer/book.sgml b/en_US.ISO8859-1/books/ppp-primer/book.sgml index 59cf194479..0a9c82bf87 100644 --- a/en_US.ISO8859-1/books/ppp-primer/book.sgml +++ b/en_US.ISO8859-1/books/ppp-primer/book.sgml @@ -18,7 +18,7 @@ -$FreeBSD: doc/en_US.ISO_8859-1/books/ppp-primer/book.sgml,v 1.9 2001/04/17 01:39:30 dd Exp $ +$FreeBSD: doc/en_US.ISO8859-1/books/ppp-primer/book.sgml,v 1.10 2001/04/17 15:58:38 nik Exp $ This is a step-by-step guide for configuring FreeBSD systems to act as a dial-up router/gateway in a Local Area Environment. All entries may @@ -578,7 +578,7 @@ changes" when prompted. Testing the FreeBSD system Congratulations! Once you've made it to this point, the FreeBSD -system is configured as a network-connected UNIX system! If you made +system is configured as a network-connected Unix system! If you made any changes to the /etc/rc.conf file you should probably re-boot your FreeBSD system. This will accomplish two important objectives: