diff --git a/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml b/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml
index 96f10dce02..2e89b1e7cf 100644
--- a/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml
@@ -466,10 +466,9 @@ boot:
Here are some practical examples of loader usage:
- single-user modeTo simply boot your usual kernel, but in single-user
- mode:
+ mode:single-user modeboot -s
@@ -477,16 +476,12 @@ boot:
To unload your usual kernel and modules, and then
load just your old (or another) kernel:
-
- kernel.old
-
-
unloadload kernel.oldYou can use kernel.GENERIC to
refer to the generic kernel that comes on the install
- disk, or kernel.old to refer to
+ disk, or kernel.oldkernel.old to refer to
your previously installed kernel (when you have upgraded
or configured your own kernel, for example).
diff --git a/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml b/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml
index 09b01dd660..c0f83bd4fd 100644
--- a/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml
@@ -186,13 +186,9 @@
Using &os.current;
-
- -CURRENT
- using
-
- Join the &a.current.name; and the &a.cvsall.name; lists. This is not
+ Join the &a.current.name;-CURRENTusing and the &a.cvsall.name; lists. This is not
just a good idea, it is essential. If
you are not on the &a.current.name; list,
you will not see the comments that people are
@@ -217,39 +213,23 @@
site. You can do this in one of two ways:
-
- cvsup
-
-
- cron
-
-
- -CURRENT
- Syncing with CVSup
-
-
- Use the cvsup program
+ Use the cvsupcvsup program
with the supfile named standard-supfile
available from /usr/share/examples/cvsup.
This is the most recommended
method, since it allows you to grab the entire
collection once and then only what has changed from then
on. Many people run cvsup from
- cron and keep their
+ croncron and keep their
sources up-to-date automatically. You have to
customize the sample supfile above, and configure
- cvsup for your environment.
+ cvsup-CURRENTSyncing with CVSup for your environment.
-
- -CURRENT
- Syncing with CTM
-
-
Use the CTM facility. If you
+ linkend="ctm">CTM-CURRENTSyncing with CTM facility. If you
have very bad connectivity (high price connections or
only email access) CTM is an option.
However, it is a lot of hassle and can give you broken files.
@@ -271,11 +251,7 @@
to compile just a subset is almost guaranteed to get you
into trouble.
-
- -CURRENT
- compiling
-
- Before compiling &os.current;, read the
+ Before compiling &os.current;-CURRENTcompiling, read the
Makefile in /usr/src
carefully. You should at least install a new kernel and rebuild the world the first time through
@@ -360,12 +336,7 @@
-
- -STABLE
- using
-
-
- Join the &a.stable.name; list. This will keep you informed of
+ Join the &a.stable.name;-STABLEusing list. This will keep you informed of
build-dependencies that may appear in &os.stable;
or any other issues requiring
special attention. Developers will also make announcements
@@ -402,18 +373,7 @@
-
- cvsup
-
-
- cron
-
-
- -STABLE
- syncing with CVSup
-
-
- Use the cvsup program
+ Use the cvsupcvsup program
with the supfile named stable-supfile
from the directory
/usr/share/examples/cvsup.
@@ -421,21 +381,16 @@
method, since it allows you to grab the entire
collection once and then only what has changed from then
on. Many people run cvsup from
- cron to keep their
+ croncron to keep their
sources up-to-date automatically. You have to
customize the sample supfile above,
- and configure cvsup for your
+ and configure cvsup-STABLEsyncing with CVSup for your
environment.
-
- -STABLE
- syncing with CTM
-
-
Use the CTM facility. If
+ linkend="ctm">CTM-STABLEsyncing with CTM facility. If
you do not have a fast and inexpensive connection to
the Internet, this is the method you should consider
using.
@@ -452,12 +407,7 @@
-
- -STABLE
- compiling
-
-
- Before compiling &os.stable;, read the
+ Before compiling &os.stable;-STABLEcompiling, read the
Makefile in /usr/src
carefully. You should at least install a new kernel and rebuild the world the first time through
diff --git a/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml b/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml
index 6236701373..d966c29a1a 100644
--- a/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml
@@ -228,16 +228,13 @@
files:
- POSIX
- LANG for &posix; &man.setlocale.3; family
+ LANG for &posix;POSIX &man.setlocale.3; family
functions
- MIME
-
- MM_CHARSET for applications' MIME character
+ MM_CHARSET for applications' MIMEMIME character
set
diff --git a/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml b/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml
index d678cbeb93..6dddfe3c82 100644
--- a/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml
@@ -1176,9 +1176,8 @@ www.example.org
things:
- MX record
- Make sure that the (lowest-numbered) MX record in your DNS points to your
+ Make sure that the (lowest-numbered) MX recordMX record in your DNS points to your
host's IP address.
diff --git a/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml b/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml
index af7d1a0fa7..acfaed70fa 100644
--- a/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml
@@ -1248,12 +1248,8 @@ Exports list on foobar:
Machine Types
-
- NIS
- master server
-
- A NIS master server. This
+ A NIS master serverNISmaster server. This
server, analogous to a &windowsnt; primary domain
controller, maintains the files used by all of the NIS
clients. The passwd,
@@ -1268,12 +1264,7 @@ Exports list on foobar:
-
- NIS
- slave server
-
-
- NIS slave servers. Similar to
+ NIS slave serversNISslave server. Similar to
the &windowsnt; backup domain controllers, NIS slave
servers maintain copies of the NIS master's data files.
NIS slave servers provide the redundancy, which is
@@ -1284,12 +1275,7 @@ Exports list on foobar:
-
- NIS
- client
-
-
- NIS clients. NIS clients, like
+ NIS clientsNISclient. NIS clients, like
most &windowsnt; workstations, authenticate against the
NIS server (or the &windowsnt; domain controller in the
&windowsnt; workstations case) to log on.
@@ -4387,9 +4373,7 @@ DocumentRoot /www/someotherdomain.tld
netbios name
- NetBIOS
-
- This sets the NetBIOS name by which a Samba server
+ This sets the NetBIOSNetBIOS name by which a Samba server
is known. By default it is the same as the first
component of the host's DNS name.
@@ -4443,13 +4427,9 @@ DocumentRoot /www/someotherdomain.tld
passdb backend
- NIS+
- LDAP
- SQL database
-
Samba has several
different backend authentication models. You can
- authenticate clients with LDAP, NIS+, a SQL database,
+ authenticate clients with LDAPLDAP, NIS+NIS+, a SQL databaseSQL database,
or a modified password file. The default
authentication method is smbpasswd,
and that is all that will be covered here.
diff --git a/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml b/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml
index fe62c1eda2..8855b4ca39 100644
--- a/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml
+++ b/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml
@@ -144,15 +144,9 @@
This document assumes you have the following:
-
- ISP
-
-
- PPP
-
- An account with an Internet Service Provider (ISP) which
- you connect to using PPP.
+ An account with an Internet Service Provider (ISP)ISP which
+ you connect to using PPPPPP.
@@ -166,32 +160,14 @@
-
- PAP
-
-
- CHAP
-
-
- UNIX
-
-
- login name
-
-
- password
-
- Your login name and password. (Either a
- regular &unix; style login and password pair, or a PAP or CHAP
+ Your login namelogin name and passwordpassword. (Either a
+ regular &unix;UNIX style login and password pair, or a
+ PAPPAP or CHAPCHAP
login and password pair.)
-
- nameserver
-
-
- The IP address of one or more name servers.
+ The IP address of one or more name serversnameserver.
Normally, you will be given two IP addresses by your ISP to
use for this. If they have not given you at least one, then
you can use the enable dns command in
@@ -225,11 +201,7 @@
-
- static IP address
-
-
- If your ISP provides you with a static IP address and
+ If your ISP provides you with a static IP addressstatic IP address and
hostname, you can enter it. Otherwise, we simply let the
peer assign whatever IP address it sees fit.
@@ -362,9 +334,7 @@
Line 6 & 7:
- PPPuser PPP
-
- The dial string. User PPP uses an expect-send
+ The dial string. User PPPPPPuser PPP uses an expect-send
syntax similar to the &man.chat.8; program. Refer to
the manual page for information on the features of this
language.
@@ -455,11 +425,9 @@
Line 15:
- PAP
- CHAPIf you are using PAP or CHAP, there will be no login
at this point, and this line should be commented out or
- removed. See PAP and CHAP
+ removed. See PAPPAP and CHAPCHAP
authentication for further details.The login string is of the same chat-like syntax as
@@ -483,9 +451,7 @@ protocol: ppp
Line 16:
- timeout
-
- Sets the default idle timeout (in seconds) for the
+ Sets the default idle timeouttimeout (in seconds) for the
connection. Here, the connection will be closed
automatically after 300 seconds of inactivity. If you
never want to timeout, set this value to zero or use
@@ -496,14 +462,12 @@ protocol: ppp
Line 17:
- ISP
-
Sets the interface addresses. The string
x.x.x.x should be
replaced by the IP address that your provider has
allocated to you. The string
y.y.y.y should be
- replaced by the IP address that your ISP indicated
+ replaced by the IP address that your ISPISP indicated
for their gateway (the machine to which you
connect). If your ISP has not given you a gateway
address, use Line 14:
- password
-
- This line specifies your PAP/CHAP password. You
+ This line specifies your PAP/CHAP passwordpassword. You
will need to insert the correct value for
MyPassword. You may want to
add an additional line, such as:
@@ -1288,11 +1250,9 @@ ifconfig_tun0=
- PPPserver
-
As a server — your machine is located on
the network, and is used to connect other computers using
- PPP.
+ PPPPPPserver.
@@ -2486,9 +2446,7 @@ tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
- default route
-
- Designate the default router by changing the
+ Designate the default routerdefault route by changing the
line:defaultrouter="NO"
@@ -2508,10 +2466,8 @@ tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
nameserver 128.32.136.9
nameserver 128.32.136.12
- nameserver
- domain name
- As you can see, these set up the nameserver hosts. Of
- course, the actual domain names and addresses depend on your
+ As you can see, these set up the nameservernameserver hosts. Of
+ course, the actual domain namesdomain name and addresses depend on your
environment.
diff --git a/ru_RU.KOI8-R/books/handbook/boot/chapter.xml b/ru_RU.KOI8-R/books/handbook/boot/chapter.xml
index 8346cc6885..4cf430362d 100644
--- a/ru_RU.KOI8-R/books/handbook/boot/chapter.xml
+++ b/ru_RU.KOI8-R/books/handbook/boot/chapter.xml
@@ -500,10 +500,9 @@ boot:
загрузчика:
- однопользовательский режимЧтобы просто загрузить ваше ядро обычным образом, но в
- однопользовательском режиме:
+ однопользовательском режиме:однопользовательский режимboot -s
@@ -511,16 +510,13 @@ boot:
Для выгрузки обычных ядра и модулей, а потом просто загрузить
ваше старое (или другое) ядро:
-
- kernel.old
- unloadload kernel.oldВы можете использовать kernel.GENERIC
для обозначения стандартного ядра, поставляемого на установочном
- диске, или kernel.old для обращения к ранее
+ диске, или kernel.oldkernel.old для обращения к ранее
установленному ядру (после того, как, например, вы обновили или
отконфигурировали новое ядро).
diff --git a/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml b/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml
index 563a7601c0..81ac2cffbf 100644
--- a/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml
+++ b/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml
@@ -701,15 +701,9 @@ Fetching 133 new ports or files... done.
Использование &os.current;
-
- -CURRENT
-
- использование
-
-
- Подпишитесь на списки рассылки &a.current.name; и
+ Подпишитесь на списки рассылки &a.current.name;-CURRENTиспользование и
&a.svn-src-head.name;. Это не просто хорошая идея, это
необходимость. Если вы не являетесь
участником списка рассылки &a.current.name;,
@@ -738,23 +732,8 @@ Fetching 133 new ports or files... done.
сделать это одним из следующих двух способов:
-
- cvsup
-
-
-
- cron
-
-
-
- -CURRENT
-
- Синхронизация при помощи CVSup
-
-
-
- При помощи программы cvsup
+ При помощи программы cvsupcvsup
с sup-файлом
standard-supfile, который можно найти в
каталоге /usr/share/examples/cvsup. Это
@@ -763,10 +742,10 @@ Fetching 133 new ports or files... done.
исходных текстов один раз полностью, а затем загружать только
произошедшие изменения. Многие запускают
cvsup при помощи программы
- cron и получают самые свежие исходные
+ croncron и получают самые свежие исходные
тексты автоматически. Измените примерный файл
supfile выше и отконфигурируйте cvsup для вашего окружения.
+ linkend="cvsup">cvsup-CURRENTСинхронизация при помощи CVSup для вашего окружения.Примерный файл standard-supfile
предназначен для отслеживания специальной ветки
@@ -817,13 +796,7 @@ Fetching 133 new ports or files... done.
компиляции лишь некоторой части программ в этом случае
гарантированно вызовет проблемы.
-
- -CURRENT
-
- компиляция
-
-
- Перед тем, как компилировать &os.current;, внимательно
+ Перед тем, как компилировать &os.current;-CURRENTкомпиляция, внимательно
прочтите файл Makefile в каталоге
/usr/src. В процессе обновления вы
по крайней мере раз должны пройти через
Использование &os.stable;
-
- -STABLE
- использование
-
- Подпишитесь на список рассылки &a.stable.name;. Это позволит
+ Подпишитесь на список рассылки &a.stable.name;-STABLEиспользование. Это позволит
вам узнавать о зависимостях процесса компиляции,
которые могут появиться в ветке &os.stable; или
любых других проблемах, требующих особого внимания. В этом
@@ -959,23 +928,7 @@ Fetching 133 new ports or files... done.
-
- cvsup
-
-
-
- cron
-
-
-
- -STABLE
-
-
- Синхронизация при помощи CVSup
-
-
-
- При помощи программы cvsup
+ При помощи программы cvsupcvsup
с sup-файлом
stable-supfile из каталога
/usr/share/examples/cvsup.
@@ -984,20 +937,15 @@ Fetching 133 new ports or files... done.
текстов один раз полностью, а затем загружать только
произошедшие изменения. Многие запускают
cvsup при помощи программы
- cron и получают самые свежие исходные
+ croncron и получают самые свежие исходные
тексты автоматически. Измените примерный файл
supfile выше и отконфигурируйте cvsup для вашего окружения.
+ linkend="cvsup">cvsup-STABLEСинхронизация при помощи CVSup для вашего окружения.
-
- -STABLE
- синхронизация при помощи CTM
-
-
При помощи CTM. Если у вас нет
+ linkend="ctm">CTM-STABLEсинхронизация при помощи CTM. Если у вас нет
быстрого и недорогого подключения к Интернет, то это как раз
тот метод, которым вы должны воспользоваться.
@@ -1013,12 +961,7 @@ Fetching 133 new ports or files... done.
-
- -STABLE
- компиляция
-
-
- Перед тем, как компилировать &os.stable;, внимательно
+ Перед тем, как компилировать &os.stable;-STABLEкомпиляция, внимательно
прочтите файл Makefile в каталоге
/usr/src. В процессе обновления вы
по крайней мере раз должны пройти через
хост, необходимо убедиться в одном из двух:
-
- MX record
-
-
- Убедитесь, что запись (с наименьшим номером) MX в
+ Убедитесь, что запись (с наименьшим номером) MX вMX record
DNS соответствует IP адресу вашего хоста.
diff --git a/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml b/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml
index 21375238ea..6d91ff8aea 100644
--- a/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml
+++ b/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml
@@ -1332,13 +1332,8 @@ Exports list on foobar:
Типы машин
-
- NIS
- главный сервер
-
-
- Основной сервер NIS.
+ Основной сервер NISNISглавный сервер.
Такой сервер, по аналогии с первичным контроллером домена
&windowsnt;, хранит файлы, используемые всеми клиентами NIS. Файлы
passwd, group и
@@ -1354,12 +1349,7 @@ Exports list on foobar:
-
- NIS
- вторичный сервер
-
-
- Вторичные серверы NIS. Похожие на
+ Вторичные серверы NISNISвторичный сервер. Похожие на
вторичные контроллеры доменов &windowsnt;, вторичные серверы
NIS содержат копии оригинальных файлов данных NIS. Вторичные
серверы NIS обеспечивают избыточность, что нужно в критичных
@@ -1370,12 +1360,7 @@ Exports list on foobar:
-
- NIS
- клиент
-
-
- Клиенты NIS.
+ Клиенты NISNISклиент.
Клиенты NIS, как и большинство рабочих станций &windowsnt;,
аутентифицируются на сервере NIS (или на контроллере домена
&windowsnt; для рабочих станций &windowsnt;) во время