diff --git a/en_US.ISO8859-1/books/handbook/printing/chapter.xml b/en_US.ISO8859-1/books/handbook/printing/chapter.xml index d4c792ecad..b3d2a0fd4c 100644 --- a/en_US.ISO8859-1/books/handbook/printing/chapter.xml +++ b/en_US.ISO8859-1/books/handbook/printing/chapter.xml @@ -144,9 +144,9 @@ Starting lpd. job, ulpt0 resets the USB port. Resetting the port can cause problems with some printers, so the - unlpt0 device is usually used instead. - unlpt0 does not reset the USB port at - all. + unlpt0 device is usually used + instead. unlpt0 does not reset the + USB port at all. @@ -187,10 +187,10 @@ Starting lpd. Several communication parameters must be known to communicate with a serial printer. The most important are - baud rate or BPS (Bits Per Second) and - parity. Values vary, but typical - serial printers use a baud rate of 9600 and no - parity. + baud rate or BPS + (Bits Per Second) and parity. Values + vary, but typical serial printers use a baud rate of 9600 + and no parity. @@ -1042,17 +1042,17 @@ lp: All of the documents print on that single printer. When the Sales department grows enough to need their own printer, - the alias can be removed from the shared printer entry and used - as the name of a new printer. Users in both departments - continue to use the same commands, but the Sales documents - are sent to the new printer. + the alias can be removed from the shared printer entry and + used as the name of a new printer. Users in both + departments continue to use the same commands, but the Sales + documents are sent to the new printer. Header Pages - It can be difficult for users to locate their documents in - the stack of pages produced by a busy shared printer. + It can be difficult for users to locate their documents + in the stack of pages produced by a busy shared printer. Header pages were created to solve this problem. A header page with the user name and document name is printed before each print job. These pages are also