FreeBSD/ARM is a port of FreeBSD which aims to run - on the ARM architecture and hardware. - The project's goal is to provide support for the - architecture and hardware surrounding it.
+Currently FreeBSD should work on the i80321 based Intel +
This page contains information about the FreeBSD port to the + ARM architecture and hardware. Discussion of the ARM port takes + place on the + freebsd-arm + mailing list.
+ +ARM is officially a + + Tier 2 architecture, as the FreeBSD project + does not provide official releases or pre-built packages for this + platform due to it primarily targeting the embedded arena. However, + FreeBSD/ARM is being actively developed and maintained, is well supported, + and provides an excellent framework for building ARM-based systems.
+ +FreeBSD should work on the i80321 based Intel XScale® devboards, which includes the IQ31244 and IQ80321 boards. Support is still minimal, covering only the CPU, PCI-X bus, em(4) Ethernet adapters, the UART and timer devices.
+The i80219 XScale processor is supported, as is the EP80219 + devboard.
+ +The IXP425 is supported, as is the Avila GW2348-4 devboard.
+ +The Atmel AT91RM9200 CPU/Microcontroller range is supported. + Support is provided for the Kwikbyte KB9202 devboard range, the + BWCT board and the Hot-e HL200 thin client device.
+Minimal support for the StrongARM 1100 CPU is provided, but only within the limits of what Simics emulate: CPU, UART and clock. It is theoretically possible to boot on the Assabet board, the one Simics emulates; no attempts, successful or unsuccessful, have been reported.
-Additionally, support for the Technologic Systems TS-7200 devboard + is in the works, as is support for the Atmel AT91SAM926x CPU and + the Mavell Orion ARM SoC, the Samsung S3C2XX0 range, and Cirrus + Logic EP93XX CPUs.
+ +&a.cognet; (cognet@FreeBSD.org) has written a mini-install guide for the current FreeBSD source. It is