From ec20a60249aa2868b72c8e437a4cfd182dce1d33 Mon Sep 17 00:00:00 2001 From: Martin Heinen Date: Mon, 23 Dec 2002 22:35:53 +0000 Subject: [PATCH] Use a common null-modem cable pinout which supports hardware flow control. PR: docs/35280 Submitted by: mheinen --- .../books/handbook/serialcomms/chapter.sgml | 71 ++++++++++--------- 1 file changed, 36 insertions(+), 35 deletions(-) diff --git a/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml b/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml index 366b774aa6..180ec1b53d 100644 --- a/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml @@ -140,10 +140,18 @@ + + SG + 7 + verbunden mit + 7 + SG + + TxD 2 - connects to + verbunden mit 3 RxD @@ -151,66 +159,59 @@ RxD 3 - connects to + verbunden mit 2 TxD - DTR - 20 - connects to - 6 - DSR + RTS + 4 + verbunden mit + 5 + CTS - DSR - 6 - connects to - 20 - DTR + CTS + 5 + verbunden mit + 4 + RTS - SG - 7 - connects to - 7 - SG + DTR + 20 + verbunden mit + 6 + DSR DCD 8 - connects to - 4 - RTS - - - - RTS - 4 - 5 - CTS + 6 + DSR - CTS - 5 - connects to - 8 - DCD + DSR + 6 + verbunden mit + 20 + DTR - For DCD to RTS, connect pins 4 to 5 internally in the - connector hood, and then to pin 8 in the remote - hood. + Connect Data Set Ready (DSR) and + Data Carrier Detect (DCD) internally in the + connector hood, and then to Data Terminal + Ready (DTR) in the remote hood.