<port>fish</port> -> <filename role="package">fish</filename>

Generated with:	s:<port>(.*?)</port>:<filename role="package">\1</filename>:g

de_DE.ISO8859-1/books/handbook/disks/chapter.sgml

@@ -779,7 +779,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
 	wird eine Datei erstellt, die ein ISO 9660-Dateisystem enthält.
 	Das Kommando hat Optionen, um verschiedene Erweiterungen
 	zu unterstützen, und wird unten beschrieben.  Sie
-	k&ouml;nnen es aus dem <port>sysutils/mkisofs</port>
+	k&ouml;nnen es aus dem <filename role="package">sysutils/mkisofs</filename>
 	Port installieren.</para>
     
       <indexterm>
@@ -792,7 +792,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
 	</link>burncd</command> benutzt, das Teil des Basissystems ist.
 	SCSI und USB CD-Brenner werden mit <command><link linkend="cdrecord">
 	cdrecord</link></command> aus 
-	<port>sysutils/cdrtools</port>
+	<filename role="package">sysutils/cdrtools</filename>
 	benutzt.</para>
 
       <para>Von <command>burncd</command> wird nur eine beschr&auml;nkte
@@ -914,7 +914,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
 	<command>cdrecord</command>, um CDs zu brennen. 
 	<command>cdrecord</command> ist nicht Bestandteil des Basissystems.
 	Sie m&uuml;ssen es entweder aus den Ports in
-	<port>sysutils/cdrtools</port> oder dem
+	<filename role="package">sysutils/cdrtools</filename> oder dem
 	passenden Paket installieren.  &Auml;nderungen im Basissystem
 	k&ouml;nnen Fehler im bin&auml;ren Programm verursachen und
 	f&uuml;hren m&ouml;glicherweise dazu, da&szlig; Sie einen
@@ -1039,7 +1039,7 @@ scsibus1:
 	FreeBSD 4.3 sind im CD9660-Treiber M&ouml;glichkeiten vorgesehen,
 	eine Konvertierungstabelle zur Laufzeit zu laden.  Module f&uuml;r
 	die gebr&auml;uchlisten Kodierungen finden Sie im Port
-	<port>sysutils/cd9660_unicode</port>.</para>
+	<filename role="package">sysutils/cd9660_unicode</filename>.</para>
 
       <para>Manchmal werden Sie die Meldung <errorname>Device
         not configured</errorname> erhalten, wenn Sie versuchen,  eine
@@ -1084,7 +1084,7 @@ scsibus1:
         Dateisystem einh&auml;ngen.  Sie k&ouml;nnen Sie auch nicht auf
 	einem anderen Betriebssystem lesen.  Wenn Sie die erstellten CDs in
 	das Dateisystem einh&auml;ngen oder mit anderen Betriebssystemen
-	austauschen wollen, m&uuml;ssen Sie <port>sysutils/mkisofs</port>,
+	austauschen wollen, m&uuml;ssen Sie <filename role="package">sysutils/mkisofs</filename>,
 	wie oben beschrieben, benutzen.</para>
     </sect2>
   </sect1>

de_DE.ISO8859-1/books/handbook/multimedia/chapter.sgml

@@ -445,7 +445,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	Plugins.</para>
       
       <para><application>XMMS</application> kann von dem
-	<port>audio/xmms</port> Port oder Package installiert
+	<filename role="package">audio/xmms</filename> Port oder Package installiert
 	werden.</para>
 
       <para>Die Benutzerschnittstelle von
@@ -455,7 +455,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	<application>XMMS</application> sehr leicht zu benutzen
 	finden.</para>
 
-      <para>Der Port <port>audio/mpg123</port> ist ein alternativer,
+      <para>Der Port <filename role="package">audio/mpg123</filename> ist ein alternativer,
 	kommandozeilenorientierter MP3-Player.</para>
       
       <para><application>mpg123</application> kann ausgef&uuml;hrt
@@ -491,7 +491,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 	werden.</para>
 
       <para>Die Anwendung <command>cdda2wav</command> die in dem
-	<port>sysutils/cdrtools</port> Paket enthalten ist, kann zum
+	<filename role="package">sysutils/cdrtools</filename> Paket enthalten ist, kann zum
 	Rippen der Audiodaten und anderen Informationen von CDs
 	genutzt werden.</para>
       
@@ -521,7 +521,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 
       <para>Mit <application>cdda2wav</application> k&ouml;nnen nur
 	SCSI-CDROM-Laufwerke verwendet werden. Besitzen Sie ein
-	IDE-Laufwerk, dann probieren Sie <port>audio/cdd</port> oder 
+	IDE-Laufwerk, dann probieren Sie <filename role="package">audio/cdd</filename> oder 
 	eine der vielen anderen Anwendungen in der audio Ports
 	Collection.</para> 
     </sect2>
@@ -531,7 +531,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 
       <para>Gegenw&auml;rtig ist <application>lame</application> der
 	meistbenutzte mp3-Encoder.  <application>Lame</application>
-	kann man unter <port>audio/lame</port> in dem ports
+	kann man unter <filename role="package">audio/lame</filename> in dem ports
 	Verzeichnis finden.</para>
       
       <para>Benutzen Sie die WAV-Dateien, die sie von CD geripped

de_DE.ISO8859-1/books/handbook/security/chapter.sgml

@@ -1549,7 +1549,7 @@ permit port ttyd0</programlisting>
 	Bewohner anderer L&auml;nder zug&auml;nglich.</para>
 
       <para>Als Alternative steht die MIT Variante von Kerberos in der
-	Ports-Kollektion unter <port>security/krb5</port> zur
+	Ports-Kollektion unter <filename role="package">security/krb5</filename> zur
 	Verf&uuml;gung.</para>
     </sect2>
 

de_DE.ISO8859-1/books/handbook/sound/chapter.sgml

@@ -445,7 +445,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	Plugins.</para>
       
       <para><application>XMMS</application> kann von dem
-	<port>audio/xmms</port> Port oder Package installiert
+	<filename role="package">audio/xmms</filename> Port oder Package installiert
 	werden.</para>
 
       <para>Die Benutzerschnittstelle von
@@ -455,7 +455,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	<application>XMMS</application> sehr leicht zu benutzen
 	finden.</para>
 
-      <para>Der Port <port>audio/mpg123</port> ist ein alternativer,
+      <para>Der Port <filename role="package">audio/mpg123</filename> ist ein alternativer,
 	kommandozeilenorientierter MP3-Player.</para>
       
       <para><application>mpg123</application> kann ausgef&uuml;hrt
@@ -491,7 +491,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 	werden.</para>
 
       <para>Die Anwendung <command>cdda2wav</command> die in dem
-	<port>sysutils/cdrtools</port> Paket enthalten ist, kann zum
+	<filename role="package">sysutils/cdrtools</filename> Paket enthalten ist, kann zum
 	Rippen der Audiodaten und anderen Informationen von CDs
 	genutzt werden.</para>
       
@@ -521,7 +521,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 
       <para>Mit <application>cdda2wav</application> k&ouml;nnen nur
 	SCSI-CDROM-Laufwerke verwendet werden. Besitzen Sie ein
-	IDE-Laufwerk, dann probieren Sie <port>audio/cdd</port> oder 
+	IDE-Laufwerk, dann probieren Sie <filename role="package">audio/cdd</filename> oder 
 	eine der vielen anderen Anwendungen in der audio Ports
 	Collection.</para> 
     </sect2>
@@ -531,7 +531,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 
       <para>Gegenw&auml;rtig ist <application>lame</application> der
 	meistbenutzte mp3-Encoder.  <application>Lame</application>
-	kann man unter <port>audio/lame</port> in dem ports
+	kann man unter <filename role="package">audio/lame</filename> in dem ports
 	Verzeichnis finden.</para>
       
       <para>Benutzen Sie die WAV-Dateien, die sie von CD geripped

en_US.ISO8859-1/articles/euro/article.sgml

@@ -308,7 +308,7 @@ variable -*-helvetica-bold-r-normal-*-*-120-*-*-*-*-iso8859-15
     <itemizedlist>
       <listitem>
         <para>Describe alternative way of setting up XFree86:
-	  <port>x11/xkeycaps</port></para>
+	  <filename role="package">x11/xkeycaps</filename></para>
       </listitem>
       
       <listitem>

en_US.ISO8859-1/articles/hubs/article.sgml

@@ -137,24 +137,24 @@
               will probably do a very good job. Be sure to read &man.ftpd.8;.</para>
             </listitem>
             <listitem>
-              <para><port>ftp/ncftpd</port>: a commercial package, free for 
+              <para><filename role="package">ftp/ncftpd</filename>: a commercial package, free for 
               educational institutions.</para>
             </listitem>
             <listitem>
-              <para><port>ftp/oftpd</port>: an ftpd designed with
+              <para><filename role="package">ftp/oftpd</filename>: an ftpd designed with
               security as a main focus.</para>
             </listitem>
             <listitem>
-              <para><port>ftp/proftpd</port>: a modular and very flexible ftpd.</para>
+              <para><filename role="package">ftp/proftpd</filename>: a modular and very flexible ftpd.</para>
             </listitem>
             <listitem>
-              <para><port>ftp/pure-ftpd</port>: another ftpd developed with
+              <para><filename role="package">ftp/pure-ftpd</filename>: another ftpd developed with
                 security in mind.</para>
             </listitem>
-            <listitem><para><port>ftp/twoftpd</port>: same as above</para></listitem>
+            <listitem><para><filename role="package">ftp/twoftpd</filename>: same as above</para></listitem>
-            <listitem><para><port>ftp/vsftpd</port>: the <quote>very secure</quote> ftpd</para></listitem>
+            <listitem><para><filename role="package">ftp/vsftpd</filename>: the <quote>very secure</quote> ftpd</para></listitem>
             <listitem>
-              <para><port>ftp/wu-ftpd</port>: The widely used ftpd from Washington
+              <para><filename role="package">ftp/wu-ftpd</filename>: The widely used ftpd from Washington
               University. It became sort of infamous, because of the huge
               amount of security issues that became obvious in wu-ftpd.
               It also around for a long time, which can be positive 
@@ -185,7 +185,7 @@
           may be applied. There is just one software package
           available:
           <itemizedlist>
-            <listitem><para><port>net/rsync</port></para></listitem>
+            <listitem><para><filename role="package">net/rsync</filename></para></listitem>
           </itemizedlist>
         </para>
       </sect3>
@@ -200,7 +200,7 @@
           used httpd is Apache, although there are others around,
           take a look at <filename>/usr/ports/www</filename>.
           <itemizedlist>
-            <listitem><para><port>www/apache13</port></para></listitem>
+            <listitem><para><filename role="package">www/apache13</filename></para></listitem>
           </itemizedlist>
         </para>
       </sect3>
@@ -225,19 +225,19 @@
 
           <itemizedlist>
             <listitem>
-              <para><port>net/cvsup</port>: The native CVSup port (client and server)
+              <para><filename role="package">net/cvsup</filename>: The native CVSup port (client and server)
-                which requires <port>lang/ezm3</port> now.</para>
+                which requires <filename role="package">lang/ezm3</filename> now.</para>
             </listitem>
             <listitem>
-              <para><port>net/cvsup-mirror</port>: The CVSup mirror kit, which requires
+              <para><filename role="package">net/cvsup-mirror</filename>: The CVSup mirror kit, which requires
-                 <port>net/cvsup</port>, and configures it mirror-ready. Some
+                 <filename role="package">net/cvsup</filename>, and configures it mirror-ready. Some
                  site administrators may want a different setup, though.
               </para>
             </listitem>
           </itemizedlist>
 
-          There are a few more like <port>net/cvsupit</port> and 
+          There are a few more like <filename role="package">net/cvsupit</filename> and 
-          <port>net/cvsup-without-gui</port> you might want to have
+          <filename role="package">net/cvsup-without-gui</filename> you might want to have
           a look at. If you prefer a static binary package, take a look 
           <ulink url="http://people.freebsd.org/~jdp/s1g/">here</ulink>.
           This page stil refers to the S1G bug, that was present
@@ -342,15 +342,15 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
           program, to get the files. There are a lot around, and
           widely used, like:
           <itemizedlist>
-            <listitem><para><port>ftp/mirror</port></para></listitem>
+            <listitem><para><filename role="package">ftp/mirror</filename></para></listitem>
-            <listitem><para><port>ftp/ftpmirror</port></para></listitem>
+            <listitem><para><filename role="package">ftp/ftpmirror</filename></para></listitem>
-            <listitem><para><port>ftp/emirror</port></para></listitem>
+            <listitem><para><filename role="package">ftp/emirror</filename></para></listitem>
-            <listitem><para><port>ftp/spegla</port></para></listitem>
+            <listitem><para><filename role="package">ftp/spegla</filename></para></listitem>
-            <listitem><para><port>ftp/omi</port></para></listitem>
+            <listitem><para><filename role="package">ftp/omi</filename></para></listitem>
-            <listitem><para>some even use <port>ftp/wget</port></para></listitem>
+            <listitem><para>some even use <filename role="package">ftp/wget</filename></para></listitem>
           </itemizedlist>
 
-          <port>ftp/mirror</port> was very popular, but seemed
+          <filename role="package">ftp/mirror</filename> was very popular, but seemed
           to have some drawbacks, as its written in perl,
           and did have real problems on mirroring large
           directories like a FreeBSD site. There are rumours, that
@@ -369,7 +369,7 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
         <title>With RSYNC</title>
         <para>
           A better way, to mirror the FTP area is <application>rsync</application>.
-          You can install the port <port>net/rsync</port> and then use
+          You can install the port <filename role="package">net/rsync</filename> and then use
           rsync to sync with your upstream host. 
           <application>rsync</application> is already mentioned
           in <xref linkend="mirror-serv-rsync">.
@@ -407,7 +407,7 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
           A few sites, including the one-and-only <hostid>ftp-master.freebsd.org</hostid>
           even offer <application>CVSup</application> to mirror the contents of 
           the FTP space. You need to install a <application>cvsup</application>
-          client, preferrably from the port: <port>net/cvsup</port>.
+          client, preferrably from the port: <filename role="package">net/cvsup</filename>.
           (Also reread <xref linkend="mirror-serv-cvsup">.)
           A sample supfile, suitable for <hostid>ftp-master.freebsd.org</hostid>
           looks like this:
@@ -485,7 +485,7 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
           </itemizedlist>
 
           If you find a site, that supports it, you could use
-          <port>net/sup</port>, but it is inferior to <application>CVSup</application>
+          <filename role="package">net/sup</filename>, but it is inferior to <application>CVSup</application>
           and it's deficiencies caused John Polstra to develop
           <application>CVSup</application> in the first place, so
           it is clearly not recommended.
@@ -538,7 +538,7 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
         </programlisting>
      </para>
      <para>
-       Using <port>ftp/wget</port> or other web-mirror tools, is
+       Using <filename role="package">ftp/wget</filename> or other web-mirror tools, is
        probably not recommended.
      </para>
      <sect3 id="mirror-www-doc">
@@ -574,7 +574,7 @@ cvspserver stream tcp nowait root /usr/bin/cvs cvs -f -l -R -T /anoncvstmp --all
        <para>
          Then you need to install a couple of ports.
          You are luckt, that there is a meta-port:
-         <port>textproc/docproj</port> to do the work
+         <filename role="package">textproc/docproj</filename> to do the work
          for you. You need to setup some 
          environment variables, like
          <literal>SGML_CATALOG_FILES</literal>,

en_US.ISO8859-1/books/developers-handbook/tools/chapter.sgml

@@ -283,7 +283,7 @@
 	using separate programs, many commercial compiler makers have
 	produced Integrated Development Environments
 	(<acronym>IDE</acronym>s for short).  FreeBSD does not include
-	an IDE in the base system, but <port>devel/kdevelop</port> is
+	an IDE in the base system, but <filename role="package">devel/kdevelop</filename> is
 	available in the ports tree and many use
 	<application>Emacs</application> for this purpose.  Using
 	<application>Emacs</application> as an IDE is discussed in

en_US.ISO8859-1/books/faq/book.sgml

@@ -558,7 +558,7 @@
             <listitem>
               <para>You can retrieve the formatted files from a
                 FreeBSD CVSup server using the application
-                <port>net/cvsup</port>.  The file
+                <filename role="package">net/cvsup</filename>.  The file
                 <filename>/usr/share/examples/cvsup/www-supfile</filename>
                 contains an example CVSup configuration file for web
                 mirrors.
@@ -814,7 +814,7 @@
 
                           <entry>The Zip format.  If you want to uncompress
                             this on FreeBSD you will need to install the
-                            <port>archivers/unzip</port> port
+                            <filename role="package">archivers/unzip</filename> port
                             first.</entry>
                         </row>
 
@@ -831,7 +831,7 @@
 
                           <entry>The BZip2 format.  Less widespread than the
                             others, but generally gives smaller files.
-                            Install the <port>archivers/bzip2</port>
+                            Install the <filename role="package">archivers/bzip2</filename>
                             port to uncompress these files.</entry>
                         </row>
                       </tbody>
@@ -3075,9 +3075,9 @@ diff -u -r1.60.2.1 -r1.60.2.2
 
         <answer>
           <para>FreeBSD supports many software modems via add-on
-            software.  The <port>comms/ltmdm</port> port adds
+            software.  The <filename role="package">comms/ltmdm</filename> port adds
             support for modems based on the very popular Lucent LT
-            chipset.  The <port>comms/mwavem</port> port
+            chipset.  The <filename role="package">comms/mwavem</filename> port
             supports the modem in IBM Thinkpad 600 and 700
             laptops.</para>
 
@@ -4867,7 +4867,7 @@ crw-rw-rw-  1 root  wheel   41,   1 Oct 15 22:14 spx</screen>
         </question>
 
         <answer>
-          <para>After installing the <port>news/inn</port> package or port, an excellent
+          <para>After installing the <filename role="package">news/inn</filename> package or port, an excellent
             place to start is <ulink
             URL="http://www.cis.ohio-state.edu/~barr/INN.html">Dave Barr's
             INN Page</ulink> where you will find the INN FAQ.</para>
@@ -4881,7 +4881,7 @@ crw-rw-rw-  1 root  wheel   41,   1 Oct 15 22:14 spx</screen>
 
         <answer>
           <para>Use the Port, Luke!  A pre-patched version of Apache,
-            <port>apache13-fp</port>, is available in the ports
+            <filename role="package">apache13-fp</filename>, is available in the ports
             tree.</para>
         </answer>
       </qandaentry>
@@ -4982,7 +4982,7 @@ crw-rw-rw-  1 root  wheel   41,   1 Oct 15 22:14 spx</screen>
             <command>portupgrade</command> tool to automate all of
             this.  <command>portupgrade</command> includes various
             tools to simplify package handling.  It is available under
-            <port>sysutils/portupgrade</port>.
+            <filename role="package">sysutils/portupgrade</filename>.
             Since it is written in Ruby,
             <command>portupgrade</command> is an unlikely candidate for
             integration with the main FreeBSD tree.  That should not
@@ -5632,7 +5632,7 @@ use "disklabel -r" to install initial label</screen>
         </question>
 
         <answer>
-          <para>Yes; see the <port>security/cfs</port> port.</para>
+          <para>Yes; see the <filename role="package">security/cfs</filename> port.</para>
         </answer>
       </qandaentry>
 
@@ -5976,7 +5976,7 @@ C:\="DOS"</programlisting>
             <command>mount</command> only works on filesystems.  Audio
             CDs do not have filesystems; they just have data.  You
             need a program that reads audio CDs, such as the
-            <port>audio/xmcd</port> port.</para>
+            <filename role="package">audio/xmcd</filename> port.</para>
         </answer>
       </qandaentry>
 
@@ -6315,7 +6315,7 @@ C:\="DOS"</programlisting>
 	    natively supported by FreeBSD.  If your printer does not work
 	    in DOS or Windows NT 4.0, it is probably a WinPrinter.  Your
 	    only hope of getting one of these to work is to check if the
-	    <port>print/pnm2ppa</port> port supports it.</para>
+	    <filename role="package">print/pnm2ppa</filename> port supports it.</para>
         </answer>
       </qandaentry>
 
@@ -6690,9 +6690,9 @@ define(`confDELIVERY_MODE',`deferred')dnl</programlisting>
             an MTA installed from the ports).</para>
 
           <para>There are various alternative MTA's in the ports tree
-            already, with <port>mail/exim</port>,
+            already, with <filename role="package">mail/exim</filename>,
-            <port>mail/postfix</port>, <port>mail/qmail</port>,
+            <filename role="package">mail/postfix</filename>, <filename role="package">mail/qmail</filename>,
-            <port>mail/zmailer</port>, being some of the most popular
+            <filename role="package">mail/zmailer</filename>, being some of the most popular
             choises.</para>
 
           <para>Diversity is nice, and the fact that you have many
@@ -8225,7 +8225,7 @@ Key F15        A        A        Menu Workplace Nop</programlisting>
             url="http://gladstone.uoregon.edu/~eanholt/dri/">XFree86-4
             Direct Rendering on FreeBSD</ulink> page.  Users of
             XFree86 version 3.3 can use the Utah-GLX port found in
-            <port>graphics/utah-glx</port> to get limited accelerated
+            <filename role="package">graphics/utah-glx</filename> to get limited accelerated
             OpenGL on the Matrox Gx00, ATI Rage Pro, SiS 6326, i810,
             Savage, and older NVIDIA chips.</para>
           </answer>
@@ -8318,7 +8318,7 @@ Key F15        A        A        Menu Workplace Nop</programlisting>
 
           <para>If you only have access to the Internet through a
             <quote>shell account</quote>, you may want to have a look
-            at the <port>net/slirp</port> package.  It can provide you
+            at the <filename role="package">net/slirp</filename> package.  It can provide you
             with (limited) access to services such as ftp and http
             direct from your local machine.</para>
         </answer>
@@ -8806,7 +8806,7 @@ Key F15        A        A        Menu Workplace Nop</programlisting>
           <para>Use the <application>SMBFS</application> toolset.  It
             includes a set of kernel modifications and a set of
             userland programs.  The programs and information are
-            available as <port>net/smbfs</port> in the ports
+            available as <filename role="package">net/smbfs</filename> in the ports
             collection, or in the base system as of 4.5-RELEASE and
             later.</para>
         </answer>

en_US.ISO8859-1/books/fdp-primer/examples/appendix.sgml

@@ -153,7 +153,7 @@
     <title>Producing formatted output</title>
 
     <para>This section assumes that you have installed the software listed in
-      the <port>textproc/docproj</port> port, either by hand, or by
+      the <filename role="package">textproc/docproj</filename> port, either by hand, or by
       using the port.  Further, it is assumed that your software is installed
       in subdirectories under <filename>/usr/local/</filename>, and the
       directory where binaries have been installed is in your

en_US.ISO8859-1/books/fdp-primer/overview/chapter.sgml

@@ -176,7 +176,7 @@
 
     <procedure>
       <step>
-	<para>Install the <port>textproc/docproj</port>
+	<para>Install the <filename role="package">textproc/docproj</filename>
 	  meta-port.</para>
 
 	<screen>&prompt.root; <userinput>cd /usr/ports/textproc/docproj</userinput>

en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml

@@ -80,8 +80,8 @@
       <emphasis>loose</emphasis> variants).</para>
 	  
     <para>The HTML DTDs are available from the ports collection in the
-      <port>textproc/html</port> port.  They are automatically
+      <filename role="package">textproc/html</filename> port.  They are automatically
-      installed as part of the <port>textproc/docproj</port>
+      installed as part of the <filename role="package">textproc/docproj</filename>
       port.</para>
 
     <sect2>
@@ -677,8 +677,8 @@
     </note>
     
     <para>The DocBook DTD is available from the ports collection in the
-      <port>textproc/docbook</port> port.  It is automatically
+      <filename role="package">textproc/docbook</filename> port.  It is automatically
-      installed as part of the <port>textproc/docproj</port>
+      installed as part of the <filename role="package">textproc/docproj</filename>
       port.</para>
     
     <sect2>
@@ -1848,11 +1848,11 @@ This is the file called 'foo2'</screen>
 
           <para>Use:</para>
 
-          <programlisting><![ CDATA [<para>Install <port>net/ethereal</port> to view network traffic.</para>]]></programlisting>
+          <programlisting><![ CDATA [<para>Install <filename role="package">net/ethereal</filename> to view network traffic.</para>]]></programlisting>
 
           <para>Appearance:</para>
 	  
-          <para>Install <port>net/ethereal</port> to view network traffic.</para>
+          <para>Install <filename role="package">net/ethereal</filename> to view network traffic.</para>
         </example>
       </sect3>
 
@@ -2256,12 +2256,12 @@ This is the file called 'foo2'</screen>
 	  change, but that is not guaranteed.</para>
 
 	<para>You will also need to install the
-	  <port>graphics/ImageMagick</port> port, which is used to
+	  <filename role="package">graphics/ImageMagick</filename> port, which is used to
 	  convert between the different image formats.  This is a big port,
 	  and most of it is not required.  However, while we are working on the
 	  <filename>Makefile</filename>s and other infrastructure it makes
 	  things easier.  This port is <emphasis>not</emphasis> in the
-	  <port>textproc/docproj</port> meta port, you must install it
+	  <filename role="package">textproc/docproj</filename> meta port, you must install it
 	  by hand.</para>
 
 	<para>The best example of what follows in practice is the

en_US.ISO8859-1/books/fdp-primer/sgml-primer/chapter.sgml

@@ -326,7 +326,7 @@
     <para>The information on attributes, elements, and tags is stored
       in SGML catalogs.  The various Documentation Project tools use
       these catalog files to validate your work.  The tools in
-      <port>textproc/docproj</port> include a variety of SGML catalog
+      <filename role="package">textproc/docproj</filename> include a variety of SGML catalog
       files.  The FreeBSD Documentation Project includes its own set
       of catalog files.  Your tools need to know about both sorts of
       catalog files.</para>
@@ -340,7 +340,7 @@
     
       <procedure>
 	<step>
-	  <para>Download and install <port>textproc/docproj</port>
+	  <para>Download and install <filename role="package">textproc/docproj</filename>
 	    from the FreeBSD ports system.  This is a
             <emphasis>meta-port</emphasis> that should download and install
             all of the programs and supporting files that are used by the
@@ -411,7 +411,7 @@ setenv SGML_CATALOG_FILES=/usr/doc/en_US.ISO8859-1/share/sgml/catalog</programli
 	<step>
 	  <para>Try and validate this file using an SGML parser.</para>
 
-	  <para>Part of <port>textproc/docproj</port> is the
+	  <para>Part of <filename role="package">textproc/docproj</filename> is the
 	    &man.nsgmls.1; <link linkend="sgml-primer-validating">validating
 	    parser</link>.  Normally, &man.nsgmls.1; reads in a document
 	    marked up according to an SGML DTD and returns a copy of the
@@ -714,7 +714,7 @@ nsgmls:example.sgml:6:8:E: end tag for "HEAD" which is not finished</screen>
 	<para>Look at the contents of
 	  <filename>/usr/local/share/sgml/html/catalog</filename>.  This is
 	  the catalog file for the HTML DTDs that will have been installed as
-	  part of the <port>textproc/docproj</port> port.</para>
+	  part of the <filename role="package">textproc/docproj</filename> port.</para>
       </sect3>
 
       <sect3>

en_US.ISO8859-1/books/fdp-primer/stylesheets/chapter.sgml

@@ -48,7 +48,7 @@
       Norm Walsh's modular DocBook stylesheets.</para>
     
     <para>These can be found in
-      <port>textproc/dsssl-docbook-modular</port>.</para>
+      <filename role="package">textproc/dsssl-docbook-modular</filename>.</para>
 
     <para>The modified stylesheets are not in the ports system.  Instead they
       are part of the Documentation Project source repository, and can be

en_US.ISO8859-1/books/fdp-primer/tools/chapter.sgml

@@ -47,10 +47,10 @@
     tools is covered in later chapters.</para>     
 
   <tip>
-    <title>Use <port>textproc/docproj</port> if possible</title>
+    <title>Use <filename role="package">textproc/docproj</filename> if possible</title>
 
     <para>You can save yourself a lot of time if you install the
-      <port>textproc/docproj</port> port.  This is a
+      <filename role="package">textproc/docproj</filename> port.  This is a
       <emphasis>meta-port</emphasis> which does not contain any software
       itself.  Instead, it depends on various other ports being installed
       correctly.  Installing this port <emphasis>should</emphasis>
@@ -84,12 +84,12 @@
       <para>These programs are required before you can usefully work with the
 	FreeBSD documentation, and they will allow you to convert the
 	documentation to HTML, plain text, and RTF formats.  They are all
-	included in <port>textproc/docproj</port>.</para>
+	included in <filename role="package">textproc/docproj</filename>.</para>
       
       <variablelist>
 	<varlistentry>
 	  <term><application>SP</application>
-	    (<port>textproc/sp</port>)</term>
+	    (<filename role="package">textproc/sp</filename>)</term>
 	  
 	  <listitem>
 	    <para>A suite of applications, including a validating SGML parser,
@@ -99,7 +99,7 @@
 	
 	<varlistentry>
 	  <term><application>Jade</application>
-	    (<port>textproc/jade</port>)</term>
+	    (<filename role="package">textproc/jade</filename>)</term>
 	  
 	  <listitem>
 	    <para>A DSSSL implementation.  Used for converting marked up
@@ -109,7 +109,7 @@
 	
 	<varlistentry>
 	  <term><application>Tidy</application>
-	    (<port>www/tidy</port>)</term>
+	    (<filename role="package">www/tidy</filename>)</term>
 	  
 	  <listitem>
 	    <para>An HTML 'pretty printer', used to reformat some of the
@@ -120,7 +120,7 @@
 	
 	<varlistentry>
 	  <term><application>Links</application>
-	    (<port>www/links</port>)</term>
+	    (<filename role="package">www/links</filename>)</term>
 	  
 	  <listitem>
 	    <para>A text-mode WWW browser, &man.links.1; can also convert
@@ -130,7 +130,7 @@
 
 	<varlistentry>
 	  <term><application>peps</application>
-	    (<port>graphics/peps</port>)</term>
+	    (<filename role="package">graphics/peps</filename>)</term>
 	  
 	  <listitem>
 	    <para>Some of the documentation includes images, some of which are
@@ -149,7 +149,7 @@
       
       <variablelist>
 	<varlistentry>
-	  <term>HTML DTD (<port>textproc/html</port>)</term>
+	  <term>HTML DTD (<filename role="package">textproc/html</filename>)</term>
 	  
 	  <listitem>
 	    <para>HTML is the markup language of choice for the World Wide
@@ -158,7 +158,7 @@
 	</varlistentry>
 	
 	<varlistentry>
-	  <term>DocBook DTD (<port>textproc/docbook</port>)</term>
+	  <term>DocBook DTD (<filename role="package">textproc/docbook</filename>)</term>
 	  
 	  <listitem>
 	    <para>DocBook is designed for marking up technical documentation.
@@ -168,7 +168,7 @@
 	
 	<varlistentry>
 	  <term>ISO 8879 entities
-	    (<port>textproc/iso8879</port>)</term>
+	    (<filename role="package">textproc/iso8879</filename>)</term>
 	  
 	  <listitem>
 	    <para>19 of the ISO 8879:1986 character entity sets used by many
@@ -189,7 +189,7 @@
       <variablelist>
 	<varlistentry>
 	  <term>Modular DocBook Stylesheets
-	    (<port>textproc/dsssl-docbook-modular</port>)</term>
+	    (<filename role="package">textproc/dsssl-docbook-modular</filename>)</term>
 	  
 	  <listitem>
 	    <para>The Modular DocBook Stylesheets are used when converting
@@ -216,8 +216,8 @@
 	<varlistentry>
 	  <term><application>JadeTeX</application> and
 	    <application>teTeX</application>
-	    (<port>print/jadetex</port> and
+	    (<filename role="package">print/jadetex</filename> and
-	    <port>print/teTeX</port>)</term>
+	    <filename role="package">print/teTeX</filename>)</term>
 	  
 	  <listitem>
 	    <para><application>Jade</application> and
@@ -249,8 +249,8 @@
 	<varlistentry>
 	  <term><application>Emacs</application> or
 	    <application>xemacs</application> 
-	    (<port>editors/emacs</port> or
+	    (<filename role="package">editors/emacs</filename> or
-	    <port>editors/xemacs</port>)</term>
+	    <filename role="package">editors/xemacs</filename>)</term>
 	  
 	  <listitem>
 	    <para>Both these editors include a special mode for editing

en_US.ISO8859-1/books/fdp-primer/translations/chapter.sgml

@@ -371,7 +371,7 @@
 	  entity, and a semi-colon (;).</para>
 
 	<para>The entity names are defined in ISO8879, which is in the ports
-	  tree as <port>textproc/iso8879</port>.</para>
+	  tree as <filename role="package">textproc/iso8879</filename>.</para>
 
 	<para>A few examples include</para>
 

en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml

@@ -402,7 +402,7 @@ host2.example.com link#1             UC          0        0
 	routes.  FreeBSD also comes with the standard BSD routing
 	daemon &man.routed.8;, which speaks RIP (both version 1 and
 	version 2) and IRDP.  For more complex situations you may want
-	to try <port>net/gated</port>.</para>
+	to try <filename role="package">net/gated</filename>.</para>
 
       <para>Even when FreeBSD is configured in this way, it does not
 	completely comply with the Internet standard requirements for
@@ -3545,7 +3545,7 @@ dhcp_flags=""</programlisting>
       <para>
         This document refers to BIND 8.x, as it is the stable version 
 	used in FreeBSD.  BIND 9.x in FreeBSD can be installed through
-	the <port>net/bind9</port> port.
+	the <filename role="package">net/bind9</filename> port.
       </para>
 
       <para>

en_US.ISO8859-1/books/handbook/disks/chapter.sgml

@@ -727,7 +727,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
 	program is used to produce a data file containing an ISO 9660 file
 	system. It has options that support various extensions, and is
 	described below. You can install it with the 
-	<port>sysutils/mkisofs</port> port.</para>
+	<filename role="package">sysutils/mkisofs</filename> port.</para>
     
       <indexterm>
         <primary>CD burner</primary>
@@ -738,7 +738,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
 	linkend="burncd">burncd</link></command> program that is part of
 	the base system. SCSI and USB CD burners should use
 	<command><link linkend="cdrecord">cdrecord</link></command> from
-	the <port>sysutils/cdrtools</port> port.</para>
+	the <filename role="package">sysutils/cdrtools</filename> port.</para>
 
       <para><command>burncd</command> has a limited number of
 	supported drives. To find out if a drive is supported, see
@@ -847,7 +847,7 @@ Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
       <para>If you do not have an ATAPI CD burner, you will have to use
 	<command>cdrecord</command> to burn your
 	CDs. <command>cdrecord</command> is not part of the base system;
-	you must install it from either the port at <port>sysutils/cdrtools</port>
+	you must install it from either the port at <filename role="package">sysutils/cdrtools</filename>
 	or the appropriate
 	package. Changes to the base system can cause binary versions of
 	this program to fail, possibly resulting in a
@@ -964,7 +964,7 @@ scsibus1:
 	CD9660 driver includes hooks to load an appropriate Unicode
 	conversion table on the fly.  Modules for some of the common
 	encodings are available via the
-	<port>sysutils/cd9660_unicode</port> port.)</para>
+	<filename role="package">sysutils/cd9660_unicode</filename> port.)</para>
 
       <para>Occasionally, you might get <errorname>Device not
 	configured</errorname> when trying to mount a CDROM.  This
@@ -1004,7 +1004,7 @@ scsibus1:
 	  Such a CDROM cannot be read under any operating system
 	  except FreeBSD.  If you want to be able to mount the CD, or
 	  share data with another operating system, you must use
-	  <port>sysutils/mkisofs</port> as described above.</para>
+	  <filename role="package">sysutils/mkisofs</filename> as described above.</para>
     </sect2>
   </sect1>
   

en_US.ISO8859-1/books/handbook/l10n/chapter.sgml

@@ -593,18 +593,18 @@ keychange="<replaceable>fkey_number sequence</replaceable>"</programlisting>
 	  <tbody>
 	    <row>
 	      <entry>Traditional Chinese (BIG-5)</entry>
-	      <entry><port>chinese/big5con</port></entry>
+	      <entry><filename role="package">chinese/big5con</filename></entry>
 	    </row>
 
 	    <row>
 	      <entry>Japanese</entry>
-	      <entry><port>japanese/ja-kon2-*</port> or
+	      <entry><filename role="package">japanese/ja-kon2-*</filename> or
-	        <port>japanese/Mule_Wnn</port></entry>
+	        <filename role="package">japanese/Mule_Wnn</filename></entry>
 	    </row>
 
 	    <row>
 	      <entry>Korean</entry>
-	      <entry><port>korean/ko-han</port></entry>
+	      <entry><filename role="package">korean/ko-han</filename></entry>
 	    </row>
 	  </tbody>
 	</tgroup>
@@ -810,7 +810,7 @@ font8x8="cp866-8x8"</programlisting>
 	      <para><anchor id="russian-note">The Russian KOI8-R locale
 		may not work with old XFree86 releases (lower than 3.3).
 		The XFree86 port from
-		<port>x11/XFree86</port> already is the
+		<filename role="package">x11/XFree86</filename> already is the
 		most recent XFree86 version, so it will work if you
 		install XFree86 from the port.  This should not be an
 		issue unless you are using an old version of
@@ -820,7 +820,7 @@ font8x8="cp866-8x8"</programlisting>
 
 	  <listitem>
 	    <para>Go to the
-	      <port>russian/X.language</port> directory
+	      <filename role="package">russian/X.language</filename> directory
 	      and issue the following command:</para>
 
 	    <screen>&prompt.root; <userinput>make install</userinput></screen>
@@ -902,7 +902,7 @@ Option "XkbOptions"  "grp:caps_toggle"</programlisting>
       <indexterm><primary>Traditional Chinese localization</primary></indexterm>
       <para>The FreeBSD-Taiwan Project has an I18N/L10N tutorial for
 	FreeBSD at <ulink url="http://freebsd.sinica.edu.tw/~ncvs/zh-l10n-tut/">http://freebsd.sinica.edu.tw/~ncvs/zh-l10n-tut/</ulink>
-	using many <port>chinese/*</port> applications.
+	using many <filename role="package">chinese/*</filename> applications.
 	The editor for the <literal>zh-L10N-tut</literal> is Clive Lin
 	<email>Clive@CirX.org</email>.  You can also cvsup the following
 	collections at <hostid

en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml

@@ -1666,12 +1666,12 @@
       <title>Installation</title>
       
       <para>The easiest way to install <application>CVSup</application>
-	is to use the precompiled <port>net/cvsup</port> package
+	is to use the precompiled <filename role="package">net/cvsup</filename> package
 	from the FreeBSD <link linkend="ports">packages collection</link>.
 	If you prefer to build <application>CVSup</application> from
-	source, you can use the <port>net/cvsup</port>
+	source, you can use the <filename role="package">net/cvsup</filename>
 	port instead.  But be forewarned: the
-	<port>net/cvsup</port> port depends on the Modula-3
+	<filename role="package">net/cvsup</filename> port depends on the Modula-3
 	system, which takes a substantial amount of time and
 	disk space to download and build.</para>
       

en_US.ISO8859-1/books/handbook/multimedia/chapter.sgml

@@ -310,7 +310,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 
     <para>If all goes well, you should now have a functioning sound
       card.  You may want to install an application such as
-      <port>audio/mpg123</port> to listen to audio files.</para>
+      <filename role="package">audio/mpg123</filename> to listen to audio files.</para>
 
     <sect2>
       <title>Common Problems</title>
@@ -388,14 +388,14 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	support.</para>
 
       <para><application>XMMS</application> can be installed from the
-	<port>audio/xmms</port> port or package.</para>
+	<filename role="package">audio/xmms</filename> port or package.</para>
 
       <para><application>XMMS'</application> interface is intuitive,
 	with a playlist, graphic equalizer, and more.  Those familiar
 	with <application>Winamp</application> will find
 	<application>XMMS</application> simple to use.</para>
 
-      <para>The <port>audio/mpg123</port> port is an alternative,
+      <para>The <filename role="package">audio/mpg123</filename> port is an alternative,
 	command-line MP3 player.</para>
 
       <para><application>mpg123</application> can be run by specifying
@@ -430,7 +430,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 	files.</para>
 
       <para>The <command>cdda2wav</command> tool, which is a part of
-	the <port>sysutils/cdrtools</port> suite, is used for ripping
+	the <filename role="package">sysutils/cdrtools</filename> suite, is used for ripping
 	audio information of CDs and the information associated with
 	it.</para>
 
@@ -457,7 +457,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
       <screen>&prompt.root; cdda2wav -D <replaceable>0,1,0</replaceable> -t 1+7</screen>
 
       <para><application>cdda2wav</application> only supports SCSI
-	CDROM drives.  For IDE drives, try out <port>audio/cdd</port> or
+	CDROM drives.  For IDE drives, try out <filename role="package">audio/cdd</filename> or
 	some of the various other utilities in the audio ports
 	collection.</para>
 
@@ -469,7 +469,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
       <para>Nowadays, the mp3 encoder of choice is
 	<application>lame</application>.
 	<application>Lame</application> can be found at
-	<port>audio/lame</port> in the ports tree.</para>
+	<filename role="package">audio/lame</filename> in the ports tree.</para>
 
       <para>Using the ripped WAV files, the following command will
 	convert <filename>audio01.wav</filename> to

en_US.ISO8859-1/books/handbook/ports/chapter.sgml

@@ -515,7 +515,7 @@ docbook                     =
 	  mentioned sections.</para>
 
 	<step>
-	  <para>Install the <port>net/cvsup</port> port.  See <link
+	  <para>Install the <filename role="package">net/cvsup</filename> port.  See <link
 	      linkend="cvsup-install">CVSup Installation</link> (<xref
 	      linkend="cvsup-install">) for more details.</para>
 	</step>

en_US.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml

@@ -2012,7 +2012,7 @@ ppp_profile="name_of_service_provider"</programlisting>
 	Alcatel's license agreement</ulink>.</para>
 
       <para>To install the port, simply use the <link linkend="ports">
-	ports collection</link> to install the <port>net/pppoa</port>
+	ports collection</link> to install the <filename role="package">net/pppoa</filename>
 	port and follow
 	the instructions provided there.</para>
 

en_US.ISO8859-1/books/handbook/security/chapter.sgml

@@ -1441,7 +1441,7 @@ permit port ttyd0</programlisting>
 
       <para>Alternatively, the MIT implementation of Kerberos is
         available from the ports collection as
-        <port>security/krb5</port>.</para>
+        <filename role="package">security/krb5</filename>.</para>
     </sect2>
 
     <sect2>

en_US.ISO8859-1/books/handbook/sound/chapter.sgml

@@ -310,7 +310,7 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 
     <para>If all goes well, you should now have a functioning sound
       card.  You may want to install an application such as
-      <port>audio/mpg123</port> to listen to audio files.</para>
+      <filename role="package">audio/mpg123</filename> to listen to audio files.</para>
 
     <sect2>
       <title>Common Problems</title>
@@ -388,14 +388,14 @@ pcm0: &lt;SB16 DSP 4.11&gt; on sbc0</screen>
 	support.</para>
 
       <para><application>XMMS</application> can be installed from the
-	<port>audio/xmms</port> port or package.</para>
+	<filename role="package">audio/xmms</filename> port or package.</para>
 
       <para><application>XMMS'</application> interface is intuitive,
 	with a playlist, graphic equalizer, and more.  Those familiar
 	with <application>Winamp</application> will find
 	<application>XMMS</application> simple to use.</para>
 
-      <para>The <port>audio/mpg123</port> port is an alternative,
+      <para>The <filename role="package">audio/mpg123</filename> port is an alternative,
 	command-line MP3 player.</para>
 
       <para><application>mpg123</application> can be run by specifying
@@ -430,7 +430,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
 	files.</para>
 
       <para>The <command>cdda2wav</command> tool, which is a part of
-	the <port>sysutils/cdrtools</port> suite, is used for ripping
+	the <filename role="package">sysutils/cdrtools</filename> suite, is used for ripping
 	audio information of CDs and the information associated with
 	it.</para>
 
@@ -457,7 +457,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
       <screen>&prompt.root; cdda2wav -D <replaceable>0,1,0</replaceable> -t 1+7</screen>
 
       <para><application>cdda2wav</application> only supports SCSI
-	CDROM drives.  For IDE drives, try out <port>audio/cdd</port> or
+	CDROM drives.  For IDE drives, try out <filename role="package">audio/cdd</filename> or
 	some of the various other utilities in the audio ports
 	collection.</para>
 
@@ -469,7 +469,7 @@ MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
       <para>Nowadays, the mp3 encoder of choice is
 	<application>lame</application>.
 	<application>Lame</application> can be found at
-	<port>audio/lame</port> in the ports tree.</para>
+	<filename role="package">audio/lame</filename> in the ports tree.</para>
 
       <para>Using the ripped WAV files, the following command will
 	convert <filename>audio01.wav</filename> to

en_US.ISO8859-1/books/handbook/x11/chapter.sgml

@@ -460,7 +460,7 @@ EndSection</programlisting>
       <para>Once the configuration file has been placed in a common
 	location, configuration is complete.  In order to start
 	<application>XFree86 4.X</application> with &man.startx.1;,
-	install the <port>x11/wrapper</port> port.
+	install the <filename role="package">x11/wrapper</filename> port.
 	<application>XFree86 4.X</application> can also be started with
 	&man.xdm.1;.</para>
 
@@ -530,10 +530,10 @@ EndSection</programlisting>
     can be readily used
     with <application>XFree86</application>, either version 3.X or 
     version 4.X.  For instance, the URW font collection 
-    (<port>x11-fonts/urwfonts</port>) includes
+    (<filename role="package">x11-fonts/urwfonts</filename>) includes
     high quality versions of standard type1 fonts (Times Roman, 
     Helvetica, Palatino and others).  The Freefont collection
-    (<port>x11-fonts/freefont</port>) includes
+    (<filename role="package">x11-fonts/freefont</filename>) includes
     many more fonts, but most of them are intended for use in 
     graphics software such as the Gimp, and are not complete 
     enough to serve as screen fonts.  In addition,
@@ -590,7 +590,7 @@ EndSection</programlisting>
       TrueType font server is needed.
       <application>Xfstt</application> is commonly used for
       this purpose.  To install <application>Xfstt</application>,
-      simply install the port <port>x11-servers/Xfstt</port>.</para>
+      simply install the port <filename role="package">x11-servers/Xfstt</filename>.</para>
 
     <para>Now make a directory for the TrueType fonts (for example,
       <filename>/usr/X11R6/lib/X11/fonts/TrueType</filename>)
@@ -603,7 +603,7 @@ EndSection</programlisting>
       <filename>fonts.dir</filename> file, so that the X font renderer
       knows that these new files have been installed.
       <command>ttmkfdir</command> is available from the FreeBSD
-      Ports Collection as <port>x11-fonts/ttmkfdir</port>.</para>
+      Ports Collection as <filename role="package">x11-fonts/ttmkfdir</filename>.</para>
 
 <screen>&prompt.root; <userinput>cd /usr/X11R6/lib/X11/fonts/TrueType</userinput>
 &prompt.root; <userinput>ttmkfdir > fonts.dir</userinput></screen>
@@ -725,7 +725,7 @@ match any family == "LuciduxMono"       edit family =+ "Lucidux Mono";</programl
         details); there are patches for gtk+ to do the same, 
         so if compiled against such a patched gtk+, the GNOME environment
         and Mozilla can also use anti-aliased fonts.  In fact, there
-        is now a port called <port>x11/gdkxft</port> which allows one
+        is now a port called <filename role="package">x11/gdkxft</filename> which allows one
 	to use antialiased fonts without recompiling: see 
 	<xref linkend="x11-wm-gnome-antialias"> for details.</para>
 
@@ -1086,7 +1086,7 @@ DisplayManager.requestPort:     0</screen>
 	  use them with gtk applications such as the GNOME
 	  environment.  The most straightforward way is probably by
 	  using the <application>libgdkxft</application> library, in
-	  the <port>x11/gdkxft</port> port.  After installing this
+	  the <filename role="package">x11/gdkxft</filename> port.  After installing this
 	  port, read the
 	  <filename>/usr/X11R6/share/doc/gdkxft/README</filename> file
 	  carefully.</para>

en_US.ISO8859-1/books/porters-handbook/book.sgml

@@ -1595,7 +1595,7 @@ RESOLUTION?=   300
        @${FALSE}
 .endif</programlisting>
 
-      <para><port>japanese/xdvi300</port> also has all the regular
+      <para><filename role="package">japanese/xdvi300</filename> also has all the regular
         patches, package files, etc.  If you type <command>make</command>
         there, it will take the default value for the resolution (300) and
         build the port normally.</para>
@@ -1738,7 +1738,7 @@ ${PREFIX}/man/ja/man4/baz.4.gz</programlisting>
       <para>There are many programs that require a Motif library (available
         from several commercial vendors, while there is a free clone reported
         to be able to run many applications in
-        <port>x11-toolkits/lesstif</port>) to compile.  Since it is a
+        <filename role="package">x11-toolkits/lesstif</filename>) to compile.  Since it is a
         popular toolkit and their licenses usually permit redistribution of
         statically linked binaries, we have made special provisions for
         handling ports that require Motif in a way that we can easily compile
@@ -1834,7 +1834,7 @@ Options:
 
       <para>Here's a seven-step procedure to convert ports to use
         <command>install-info</command>.
-        <port>editors/emacs</port> will be used as an
+        <filename role="package">editors/emacs</filename> will be used as an
         example.</para>
 
       <procedure>
@@ -1886,7 +1886,7 @@ Options:
             to use the extra arguments to <command>install-info</command>
             because <command>makeinfo</command> cannot handle those texinfo
             sources.  (See <filename>Makefile</filename> and
-            <filename>pkg-plist</filename> of <port>japanese/skk</port>
+            <filename>pkg-plist</filename> of <filename role="package">japanese/skk</filename>
             for examples on how to do this).</para>
         </step>
 
@@ -3553,12 +3553,12 @@ lib/X11/oneko/sounds/cat.au
         <para>If your port requires a certain user to be on the installed
           system, let the <filename>pkg-install</filename> script call
           <command>pw</command> to create it automatically.  Look at
-          <port>net/cvsup-mirror</port> for an example.</para>
+          <filename role="package">net/cvsup-mirror</filename> for an example.</para>
 
         <para>If your port must use the same user/group ID number when it is
           installed as a binary package as when it was compiled, then you must
           choose a free UID from 50 to 999 and register it below.  Look at
-          <port>japanese/Wnn</port> for an example.</para>
+          <filename role="package">japanese/Wnn</filename> for an example.</para>
 
         <para>Make sure you do not use a UID already used by the system or
           other ports.  This is the current list of UIDs between 50 and

ja_JP.eucJP/books/fdp-primer/overview/chapter.sgml

@@ -201,7 +201,7 @@
 
     <procedure>
       <step>
-	<para><port>textproc/docproj</port> メタ port を
+	<para><filename role="package">textproc/docproj</filename> メタ port を
 	  インストールします.</para>
 
 	<screen>&prompt.root; <userinput>cd /usr/ports/textproc/docproj</userinput>

ja_JP.eucJP/books/handbook/mirrors/chapter.sgml

@@ -1546,9 +1546,9 @@
         をインストールする最も簡単な方法は, FreeBSD
 	<link linkend="ports">Ports コレクションのパッケージ</link>
 	からコンパイル済みの
-	<port>net/cvsup</port> パッケージをインストールすることです.  
+	<filename role="package">net/cvsup</filename> パッケージをインストールすることです.  
-	もしくは, <port>net/cvsup</port> でも構いません.  
+	もしくは, <filename role="package">net/cvsup</filename> でも構いません.  
-	ただし, <port>net/cvsup</port> は
+	ただし, <filename role="package">net/cvsup</filename> は
 	Modula-3 システムに依存していて, 構築にかかる時間, 
 	ディスクスペースは比較的大きくなります.</para>
 

ja_JP.eucJP/books/handbook/x11/chapter.sgml

@@ -286,7 +286,7 @@
 
       <para>設定ファイルを共通の場所に置いたら, 設定は完了です.
 	&man.startx.1; で <application>XFree86 4.X</application> を起動するために
-	<port>x11/wrapper</port> ポートをインストールします.
+	<filename role="package">x11/wrapper</filename> ポートをインストールします.
 	また, <application>XFree86 4.X</application> を &man.xdm.1; で立ち上げることも可能です.</para>
 
     </sect2>
@@ -344,9 +344,9 @@
 	Netscape での小さなフォントは頭が悪そうに見えます.
 	しかし, 世の中には質の高い Type1 (PostScript) フォントがいくつかあり,
 	<application>XFree86</application> ではバージョン 3.X でも 4.X でもそれらを簡単に利用することができます.
-	例えば, URW フォントコレクション (<port>x11-fonts/urwfonts</port>) には高品質の
+	例えば, URW フォントコレクション (<filename role="package">x11-fonts/urwfonts</filename>) には高品質の
 	Type1 フォント (Times Roman, Helvetica, Palatino など) が含まれています.
-	freefont コレクション (<port>x11-fonts/freefont</port>) にはもっとたくさんのフォントが含まれていますが,
+	freefont コレクション (<filename role="package">x11-fonts/freefont</filename>) にはもっとたくさんのフォントが含まれていますが,
 	それらは Gimp のようなグラフィックソフトウェアで使用するためのものであり,
 	スクリーンフォントとしては十分ではありません. さらに, <application>XFree86</application>
 	は簡単に TrueType フォントを使うように設定することも可能です.
@@ -396,7 +396,7 @@
 	TrueType フォントサーバが別に必要となります.
 	<application>Xfstt</application> がよく使われるものです.
 	<application>Xfstt</application> とインストールするのは簡単で,
-	<port>x11-servers/Xfstt</port> ポートを利用してください.</para>
+	<filename role="package">x11-servers/Xfstt</filename> ポートを利用してください.</para>
 
       <para>さて, まずは TrueType フォント用のディレクトリ
 	(例えば <filename>/usr/X11R6/lib/X11/fonts/TrueType</filename>)
@@ -408,7 +408,7 @@
 	<filename>fonts.dir</filename> ファイルを作ってください.
 	このファイルにより, X は新しいファイルがイントールされたことを理解します.
 	<command>ttmkfdir</command> は FreeBSD Ports コレクション,
-	<port>x11-fonts/ttmkfdir</port>, からインストールできます.</para>
+	<filename role="package">x11-fonts/ttmkfdir</filename>, からインストールできます.</para>
 
       <screen>&prompt.root; <userinput>cd /usr/X11R6/lib/X11/fonts/TrueType</userinput>
 	&prompt.root; <userinput>ttmkfdir > fonts.dir</userinput></screen>
@@ -513,7 +513,7 @@
 	<xref linkend="x11-wm-kde2-antialias"> をご覧ください).
 	gtk+ を同じようにするパッチもありますので, そのパッチを当てた gtk+
 	を使ってコンパイルし直せば GNOME 環境や Mozilla もまたアンチエイリアスなフォントを使うことができます.
-	実際には <port>x11/gdkxft</port> という port があり,
+	実際には <filename role="package">x11/gdkxft</filename> という port があり,
 	リコンパイルしなくてもアンチエイリアスなフォントを使うことができます.
 	詳しくは <xref linkend="x11-wm-gnome-antialias"> をご覧ください.</para>
       
@@ -825,7 +825,7 @@
 	<para>XFree86 デスクトップでは, フォントのアンチエイリアスは
 	  KDE 環境ではじめて登場し標準のインストールでサポートされていますが,
 	  GNOME 環境のような gtk アプリケーションでも可能です.
-	  最も素直なやり方は恐らく <port>x11/gdkxft</port> port にある
+	  最も素直なやり方は恐らく <filename role="package">x11/gdkxft</filename> port にある
 	  <application>libgdkxft</application>ライブラリ を使うことです.
 	  この port をインストールしたら
 	  <filename>/usr/X11R6/share/doc/gdkxft/README</filename>

pt_BR.ISO8859-1/books/handbook/mirrors/chapter.sgml

@@ -2019,11 +2019,11 @@
 
       <para>A maneira mais f&aacute;cil de instalar
 	<application>CVSup</application> &eacute; usar o pacote
-	pr&eacute;-compilado <port>net/cvsup</port> da <link
+	pr&eacute;-compilado <filename role="package">net/cvsup</filename> da <link
 	linkend="ports">cole&ccedil;&atilde;o de pacotes</link>
 	FreeBSD.  Caso prefira compilar <application>CVSup</application>
 	a partir do c&oacute;digo fonte, pode-se usar o
-	<literal>port</literal> <port>net/cvsup</port> ao inv&eacute;s
+	<literal>port</literal> <filename role="package">net/cvsup</filename> ao inv&eacute;s
 	do pacote.  Mas esteja avisado: o <literal>port</literal>
 	depende no sistema Modula-3 que exige tempo e espa&ccedil;o
 	de disco substancial tanto para baixar da Internet quanto

ru_RU.KOI8-R/books/faq/book.sgml

@@ -5584,7 +5584,7 @@ crw-rw-rw-  1 root  wheel   41,   1 Oct 15 22:14 spx
             использовать инструмент <command>portupgrade</command> для
             автоматизации всего этого.  В <command>portupgrade</command>
             включены различные утилиты для упрощения работы с пакаджами.  Он
-            находится в <port>sysutils/portupgrade</port>.  Так как он написан
+            находится в <filename role="package">sysutils/portupgrade</filename>.  Так как он написан
             на языке Ruby, то вряд ли <command>portupgrade</command> может быть
             кандидатом на включение в поставку FreeBSD.  Однако это вовсе не
             значит, что его нельзя использовать.</para>
@@ -8103,7 +8103,7 @@ ttyqc none network
         </question>
 
         <answer>
-          <para>Да; посмотрите порт <port>security/cfs</port>.</para>
+          <para>Да; посмотрите порт <filename role="package">security/cfs</filename>.</para>
         </answer>
       </qandaentry>
 
@@ -9136,7 +9136,7 @@ bitmap_name="/boot/splash.pcx"
             url="http://gladstone.uoregon.edu/~eanholt/dri/">XFree86-4
             Direct Rendering on FreeBSD</ulink>.  Пользователи XFree86 версии
             3.3 могут воспользоваться портом Utah-GLX, находящимся в 
-            <port>graphics/utah-glx</port>, для получения частичного ускорения
+            <filename role="package">graphics/utah-glx</filename>, для получения частичного ускорения
             OpenGL для наборов микросхем Matrox Gx00, ATI Rage Pro, SiS 6326,
             i810, Savage и старых адаптеров NVIDIA.</para>
         </answer>
@@ -10008,7 +10008,7 @@ tcp_extensions=NO
         <answer>
           <para>Используйте пакет <application>SMBFS</application>.  В него
             включён набор изменений в ядре и пользовательские программы.
-            Программы и информация доступны в виде порта <port>net/smbfs</port>
+            Программы и информация доступны в виде порта <filename role="package">net/smbfs</filename>
             из Коллекции Портов или как часть базовой системы в 4.5-RELEASE и
             более поздних версиях.</para>
         </answer>