- gem(4) has its interrupt marked INTR_MPSAFE now.
- sf(4) is locked now.
- sis(4)'s mutex is no longer marked MTX_RECURSE.
- txp(4) and wb(4) locking both need testing.
- Add an entry for vx(4) and note that its locking needs testing. This
driver dosen't need bus_dma it appears though as it uses PIO to bang
packets into and out of the card.
- if_xl is locked, but not marked INTR_MPSAFE. Also, the mutex is
marked MTX_RECURSE.
- hifn is locked and INTR_MPSAFE.
- ubsec is locked and INTR_MPSAFE.
table:
- if_bge now marked as INTR_MPSAFE, SMPng locked. Busdma is now tested.
- if_dc now marked as INTR_MPSAFE, SMPng locked. Note that this driver
uses MTX_RECURSE.
- if_de no longer uses vtophys().
- if_em is now SMPng locked.
- if_en contains locking, but is not marked as INTR_MPSAFE.
- if_ep is now marked as INTR_MPSAFE, SMPng locked, but uses MTX_RECURSE.
- if_fxp is now marked SMPng locked.
- if_gx has locking, but isn't marked INTR_MPSAFE. Uses MTX_RECURSE.
- if_pcn still uses vtophys(); locking is present, but it's not marked
as INTR_MPSAFE, and the mutex is marked MTX_RECURSE.
- if_rl contains locking, but isn't marked as INTR_MPSAFE. The mutex
is marked MTX_RECURSE.
- if_sf still uses vtophys(). It contains locking, but uses MTX_RECURSE
and isn't marked INTR_MPSAFE.
- if_sis has locking, but isn't marked as INTR_MPSAFE. Its mutex is
marked MTX_RECURSE.
that I haven't yet checked for.
if_em is now INTR_MPSAFE.
Add if_ep, which is busma-safe and INTR_MPSAFE.
if_fxp is now INTR_MPSAFE.
if_sis is now INTR_MPSAFE.
Add if_wi, which is INTR_MPSAFE.
Assign sos as ata owner due to observations of practical reality.
pst is now INTR_MPSAFE.
hifn is now INTR_MPSAFE.
ubsec is now INTR_MPSAFE.
- Change `Responsible' from 'Doug White' to 'John-Mark Gurney'
as he did the busdma conversion work.
- a!=p should be clean, but not tested fully; make this known
in the `Notes' column.
- Update the `busdma' column to 'Done' as it was completed by
John-Mark quite a while ago.
Reviewed by: jmg (cursory glance)
Approved by: des (mentor)
