<?xml version="1.0" encoding="iso-8859-7"?>
<!--

  Το Εγχειρίδιο του FreeBSD: Ασφάλεια

  The FreeBSD Greek Documentation Project

  $FreeBSD$

  %SOURCE%	en_US.ISO8859-1/books/handbook/security/chapter.xml
  %SRCID%	1.1

-->

<chapter id="security">
  <chapterinfo>
    <authorgroup>
      <author>
	<firstname>Matthew</firstname>
	<surname>Dillon</surname>
	<contrib>Το μεγαλύτερο μέρος αυτού του κεφαλαίου προέρχεται από την
           σελίδα του manual της security(7) από τον </contrib>
      </author>
    </authorgroup>
  </chapterinfo>

  <title>Ασφάλεια</title>
  <indexterm><primary>ασφάλεια</primary></indexterm>

  <sect1 id="security-synopsis">
    <title>Σύνοψη</title>

    <para>Το κεφάλαιο αυτό παρέχει μια βασική εισαγωγή στις έννοιες της
       ασφάλειας συστήματος, κάποιους γενικά καλούς κανόνες, και ορισμένα
       προχωρημένα θέματα σχετικά με το &os;.  Αρκετά από τα θέματα που
       καλύπτονται εδώ, μπορούν να εφαρμοστούν το ίδιο καλά τόσο στο ίδιο το
       σύστημα, όσο και για ασφάλεια μέσω Internet. Το Internet δεν είναι
       πλέον ένα <quote>φιλικό</quote> μέρος στο οποίο καθένας θέλει να είναι
       ο ευγενικός σας γείτονας.  Η ανάγκη ασφάλισης του συστήματος σας είναι
       επιτακτική για να προστατέψετε τα δεδομένα σας,την πνευματική σας
       ιδιοκτησία, το χρόνο σας, και πολλά περισσότερα από τα χέρια των χάκερς
       και των ομοίων τους.</para>

    <para>Το &os; παρέχει μια σειρά από βοηθητικά προγράμματα και μηχανισμούς
       για να εξασφαλίσει την ακεραιότητα και την ασφάλεια του συστήματος σας
       και του δικτύου.</para>

    <para>Αφού διαβάσετε αυτό το κεφάλαιο, θα ξέρετε:</para>

    <itemizedlist>
      <listitem>
	<para>Βασικές έννοιες για την ασφάλεια, σε σχέση με το &os;.</para>
      </listitem>

      <listitem>
	<para>Στοιχεία σχετικά με τους διάφορους μηχανισμούς κρυπτογράφησης
           που είναι διαθέσιμοι στο &os;, όπως το <acronym>DES</acronym> και
           το <acronym>MD5</acronym>.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε το σύστημα σας για κωδικούς μιας χρήσης.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε <acronym>TCP</acronym> Wrappers για χρήση με
           την <command>inetd</command>.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε τον <application>KerberosIV</application> σε
           &os; εκδόσεις πριν τη 5.0.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε τον <application>Kerberos5</application> στο
	  &os;.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε το IPsec και να δημιουργήσετε ένα
           <acronym>VPN</acronym> μεταξύ μηχανημάτων &os;/&windows;.</para>
      </listitem>

      <listitem>
	<para>Πως να ρυθμίσετε και να χρησιμοποιήσετε την κατά &os; υλοποίηση
           <acronym>SSH</acronym> του <application>OpenSSH</application>
        </para>
      </listitem>

      <listitem>
	<para>Τι είναι τα <acronym>ACL</acronym>s στο σύστημα αρχείων και πως
           να τα χρησιμοποιήσετε.</para>
      </listitem>

      <listitem>
	<para>Πως να χρησιμοποιήσετε το βοηθητικό πρόγραμμα
           <application>Portaudit</application> για να ελέγξετε λογισμικό
           τρίτου κατασκευαστή που έχει εγκατασταθεί μέσω της συλλογής Ports.
        </para>
      </listitem>

      <listitem>
	<para>Πως να χρησιμοποιήσετε τις δημοσιεύσεις security advisories
	  του &os;.</para>
      </listitem>

      <listitem>
	<para>Θα έχετε μια ιδέα για το τι είναι το Process Accounting και πως
           να το ενεργοποιήσετε στο &os;.</para>
      </listitem>
    </itemizedlist>

    <para>Πριν διαβάσετε αυτό το κεφάλαιο, θα πρέπει:</para>

    <itemizedlist>
      <listitem>
	<para>Να κατανοείτε βασικές έννοιες του &os; και του Internet.</para>
      </listitem>
    </itemizedlist>

    <para>Πρόσθετα θέματα σχετικά με την ασφάλεια καλύπτονται σε ολόκληρο το
       βιβλίο. Για παράδειγμα, ο Υποχρεωτικός Έλεγχος Πρόσβασης συζητείται
       στο <xref linkend="mac"/> και τα Internet Firewalls συζητούνται στο
       <xref linkend="firewalls"/>.</para>
  </sect1>

  <sect1 id="security-intro">
    <title>Introduction</title>

    <para>Security is a function that begins and ends with the system
      administrator.  While all BSD &unix; multi-user systems have some
      inherent security, the job of building and maintaining additional
      security mechanisms to keep those users <quote>honest</quote> is
      probably one of the single largest undertakings of the sysadmin.
      Machines are only as secure as you make them, and security concerns
      are ever competing with the human necessity for convenience.  &unix;
      systems, in general, are capable of running a huge number of
      simultaneous processes and many of these processes operate as
      servers &mdash; meaning that external entities can connect and talk
      to them.  As yesterday's mini-computers and mainframes become
      today's desktops, and as computers become networked and
      inter-networked, security becomes an even bigger issue.</para>

    <para>System security also pertains to dealing with various forms of
      attack, including attacks that attempt to crash, or otherwise make a
      system unusable, but do not attempt to compromise the
      <username>root</username> account (<quote>break root</quote>).
      Security concerns
      can be split up into several categories:</para>

    <orderedlist>
      <listitem>
	<para>Denial of service attacks.</para>
      </listitem>

      <listitem>
	<para>User account compromises.</para>
      </listitem>

      <listitem>
	<para>Root compromise through accessible servers.</para>
      </listitem>

      <listitem>
	<para>Root compromise via user accounts.</para>
      </listitem>

      <listitem>
	<para>Backdoor creation.</para>
      </listitem>
    </orderedlist>

    <indexterm>
      <primary>DoS attacks</primary>
      <see>Denial of Service (DoS)</see>
    </indexterm>
    <indexterm>
      <primary>security</primary>
      <secondary>DoS attacks</secondary>
      <see>Denial of Service (DoS)</see>
    </indexterm>
    <indexterm><primary>Denial of Service (DoS)</primary></indexterm>

    <para>A denial of service attack is an action that deprives the
      machine of needed resources.  Typically, DoS attacks are
      brute-force mechanisms that attempt to crash or otherwise make a
      machine unusable by overwhelming its servers or network stack.  Some
      DoS attacks try to take advantage of bugs in the networking
      stack to crash a machine with a single packet.  The latter can only
      be fixed by applying a bug fix to the kernel.  Attacks on servers
      can often be fixed by properly specifying options to limit the load
      the servers incur on the system under adverse conditions.
      Brute-force network attacks are harder to deal with.  A
      spoofed-packet attack, for example, is nearly impossible to stop,
      short of cutting your system off from the Internet.  It may not be
      able to take your machine down, but it can saturate your
      Internet connection.</para>

    <indexterm>
      <primary>security</primary>
      <secondary>account compromises</secondary>
    </indexterm>

    <para>A user account compromise is even more common than a DoS
      attack.  Many sysadmins still run standard
      <application>telnetd</application>, <application>rlogind</application>,
      <application>rshd</application>,
      and <application>ftpd</application> servers on their machines.
      These servers, by default, do
      not operate over encrypted connections.  The result is that if you
      have any moderate-sized user base, one or more of your users logging
      into your system from a remote location (which is the most common
      and convenient way to login to a system) will have his or her
      password sniffed.  The attentive system admin will analyze his
      remote access logs looking for suspicious source addresses even for
      successful logins.</para>

    <para>One must always assume that once an attacker has access to a
      user account, the attacker can break <username>root</username>.
      However, the reality is that in a well secured and maintained system,
      access to a user account does not necessarily give the attacker
      access to <username>root</username>.  The distinction is important
      because without access to <username>root</username> the attacker
      cannot generally hide his tracks and may, at best, be able to do
      nothing more than mess with the user's files, or crash the machine.
      User account compromises are very common because users tend not to
      take the precautions that sysadmins take.</para>

    <indexterm>
      <primary>security</primary>
      <secondary>backdoors</secondary>
    </indexterm>

    <para>System administrators must keep in mind that there are
      potentially many ways to break <username>root</username> on a machine.
      The attacker may know the <username>root</username> password,
      the attacker may find a bug in a root-run server and be able
      to break <username>root</username> over a network
      connection to that server, or the attacker may know of a bug in
      a suid-root program that allows the attacker to break
      <username>root</username> once he has broken into a user's account.
      If an attacker has found a way to break <username>root</username>
      on a machine, the attacker may not have a need
      to install a backdoor.  Many of the <username>root</username> holes
      found and closed to date involve a considerable amount of work
      by the attacker to cleanup after himself, so most attackers install
      backdoors.  A backdoor provides the attacker with a way to easily
      regain <username>root</username> access to the system, but it
      also gives the smart system administrator a convenient way
      to detect the intrusion.
      Making it impossible for an attacker to install a backdoor may
      actually be detrimental to your security, because it will not
      close off the hole the attacker found to break in the first
      place.</para>


    <para>Security remedies should always be implemented with a
      multi-layered <quote>onion peel</quote> approach and can be
      categorized as follows:</para>

    <orderedlist>
      <listitem>
	<para>Securing <username>root</username> and staff accounts.</para>
      </listitem>

      <listitem>
	<para>Securing <username>root</username>&ndash;run servers
	  and suid/sgid binaries.</para>
      </listitem>

      <listitem>
	<para>Securing user accounts.</para>
      </listitem>

      <listitem>
	<para>Securing the password file.</para>
      </listitem>

      <listitem>
	<para>Securing the kernel core, raw devices, and
	  file systems.</para>
      </listitem>

      <listitem>
	<para>Quick detection of inappropriate changes made to the
	  system.</para>
      </listitem>

      <listitem>
	<para>Paranoia.</para>
      </listitem>
    </orderedlist>

    <para>The next section of this chapter will cover the above bullet
      items in greater depth.</para>
  </sect1>

  <sect1 id="securing-freebsd">
    <title>Securing &os;</title>
    <indexterm>
      <primary>security</primary>
      <secondary>securing &os;</secondary>
    </indexterm>

    <note>
      <title>Command vs. Protocol</title>
      <para>Throughout this document, we will use
       <application>bold</application> text to refer to an
       application, and a <command>monospaced</command> font to refer
       to specific commands.  Protocols will use a normal font.  This
       typographical distinction is useful for instances such as ssh,
       since it is
       a protocol as well as command.</para>
    </note>

    <para>The sections that follow will cover the methods of securing your
      &os; system that were mentioned in the <link
        linkend="security-intro">last section</link> of this chapter.</para>

    <sect2 id="securing-root-and-staff">
      <title>Securing the <username>root</username> Account and
	Staff Accounts</title>
      <indexterm>
        <primary><command>su</command></primary>
      </indexterm>

      <para>First off, do not bother securing staff accounts if you have
	not secured the <username>root</username> account.
	Most systems have a password assigned to the <username>root</username>
	account.  The first thing you do is assume
	that the password is <emphasis>always</emphasis> compromised.
	This does not mean that you should remove the password.  The
	password is almost always necessary for console access to the
	machine.  What it does mean is that you should not make it
	possible to use the password outside of the console or possibly
	even with the &man.su.1; command.  For example, make sure that
	your ptys are specified as being insecure in the
	<filename>/etc/ttys</filename> file so that direct
	<username>root</username> logins
	via <command>telnet</command> or <command>rlogin</command> are
	disallowed.  If using other login services such as
        <application>sshd</application>, make sure that direct
	<username>root</username> logins are disabled there as well.
	You can do this by editing
        your <filename>/etc/ssh/sshd_config</filename> file, and making
        sure that <literal>PermitRootLogin</literal> is set to
        <literal>NO</literal>.  Consider every access method &mdash;
        services such as FTP often fall through the cracks.
	Direct <username>root</username> logins should only be allowed
	via the system console.</para>
      <indexterm>
        <primary><groupname>wheel</groupname></primary>
      </indexterm>

      <para>Of course, as a sysadmin you have to be able to get to
	<username>root</username>, so we open up a few holes.
	But we make sure these holes require additional password
	verification to operate.  One way to make <username>root</username>
	accessible is to add appropriate staff accounts to the
	<groupname>wheel</groupname> group (in
	<filename>/etc/group</filename>).  The staff members placed in the
	<groupname>wheel</groupname> group are allowed to
	<command>su</command> to <username>root</username>.
	You should never give staff
	members native <groupname>wheel</groupname> access by putting them in the
	<groupname>wheel</groupname> group in their password entry.  Staff
	accounts should be placed in a <groupname>staff</groupname> group, and
	then added to the <groupname>wheel</groupname> group via the
	<filename>/etc/group</filename> file.  Only those staff members
	who actually need to have <username>root</username> access
	should be placed in the
	<groupname>wheel</groupname> group.  It is also possible, when using
	an authentication method such as Kerberos, to use Kerberos'
	<filename>.k5login</filename> file in the <username>root</username>
	account to allow a &man.ksu.1; to <username>root</username>
	without having to place anyone at all in the
	<groupname>wheel</groupname> group.  This may be the better solution
	since the <groupname>wheel</groupname> mechanism still allows an
	intruder to break <username>root</username> if the intruder
	has gotten hold of your
	password file and can break into a staff account.  While having
	the <groupname>wheel</groupname> mechanism is better than having
	nothing at all, it is not necessarily the safest option.</para>

      <!-- XXX:
	This will need updating depending on the outcome of PR bin/71147.
	Personally I know what I'd like to see, which puts this in definite
	need of a rewrite, but we'll have to wait and see.  ceri@
      -->

      <para>An indirect way to secure staff accounts, and ultimately
        <username>root</username> access is to use an alternative
	login access method and
        do what is known as <quote>starring</quote> out the encrypted
        password for the staff accounts.  Using the &man.vipw.8;
        command, one can replace each instance of an encrypted password
        with a single <quote><literal>*</literal></quote> character.
	This command will update the <filename>/etc/master.passwd</filename>
	file and user/password database to disable password-authenticated
        logins.</para>

      <para>A staff account entry such as:</para>

      <programlisting>foobar:R9DT/Fa1/LV9U:1000:1000::0:0:Foo Bar:/home/foobar:/usr/local/bin/tcsh</programlisting>

      <para>Should be changed to this:</para>

      <programlisting>foobar:*:1000:1000::0:0:Foo Bar:/home/foobar:/usr/local/bin/tcsh</programlisting>

      <para>This change will prevent normal logins from occurring,
        since the encrypted password will never match
        <quote><literal>*</literal></quote>.  With this done,
	staff members must use
        another mechanism to authenticate themselves such as
        &man.kerberos.1; or &man.ssh.1; using a public/private key
        pair.  When using something like Kerberos, one generally must
        secure the machines which run the Kerberos servers and your
        desktop workstation.  When using a public/private key pair
        with ssh, one must generally secure
        the machine used to login <emphasis>from</emphasis> (typically
        one's workstation).  An additional layer of protection can be
        added to the key pair by password protecting the key pair when
        creating it with &man.ssh-keygen.1;.  Being able to
        <quote>star</quote> out the passwords for staff accounts also
        guarantees that staff members can only login through secure
        access methods that you have set up.  This forces all staff
        members to use secure, encrypted connections for all of their
        sessions, which closes an important hole used by many
        intruders: sniffing the network from an unrelated,
        less secure machine.</para>

      <para>The more indirect security mechanisms also assume that you are
	logging in from a more restrictive server to a less restrictive
	server.  For example, if your main box is running all sorts of
	servers, your workstation should not be running any.  In order for
	your workstation to be reasonably secure you should run as few
	servers as possible, up to and including no servers at all, and
	you should run a password-protected screen blanker.  Of course,
	given physical access to a workstation an attacker can break any
	sort of security you put on it.  This is definitely a problem that
	you should consider, but you should also consider the fact that the
	vast majority of break-ins occur remotely, over a network, from
	people who do not have physical access to your workstation or
	servers.</para>
      <indexterm><primary>KerberosIV</primary></indexterm>

      <para>Using something like Kerberos also gives you the ability to
	disable or change the password for a staff account in one place,
	and have it immediately affect all the machines on which the staff
	member may have an account.  If a staff member's account gets
	compromised, the ability to instantly change his password on all
	machines should not be underrated.  With discrete passwords,
	changing a password on N machines can be a mess.  You can also
	impose re-passwording restrictions with Kerberos:  not only can a
	Kerberos ticket be made to timeout after a while, but the Kerberos
	system can require that the user choose a new password after a
	certain period of time (say, once a month).</para>
    </sect2>

    <sect2>
      <title>Securing Root-run Servers and SUID/SGID Binaries</title>

      <indexterm>
        <primary><command>ntalk</command></primary>
      </indexterm>
      <indexterm>
        <primary><command>comsat</command></primary>
      </indexterm>
      <indexterm>
        <primary><command>finger</command></primary>
      </indexterm>
      <indexterm>
        <primary>sandboxes</primary>
      </indexterm>
      <indexterm>
        <primary><application>sshd</application></primary>
      </indexterm>
      <indexterm>
        <primary><application>telnetd</application></primary>
      </indexterm>
      <indexterm>
        <primary><application>rshd</application></primary>
      </indexterm>
      <indexterm>
        <primary><application>rlogind</application></primary>
      </indexterm>

      <para>The prudent sysadmin only runs the servers he needs to, no
	more, no less.  Be aware that third party servers are often the
	most bug-prone.  For example, running an old version of
	<application>imapd</application> or
	<application>popper</application> is like giving a universal
	<username>root</username> ticket out to the entire world.
	Never run a server that you have not checked out carefully.
	Many servers do not need to be run as <username>root</username>.
	For example, the <application>ntalk</application>,
	<application>comsat</application>, and
	<application>finger</application> daemons can be run in special
	user <firstterm>sandboxes</firstterm>.  A sandbox is not perfect,
	unless you go through a large amount of trouble, but the onion
	approach to security still stands: If someone is able to break
	in through a server running in a sandbox, they still have to
	break out of the sandbox.  The more layers the attacker must
	break through, the lower the likelihood of his success.  Root
	holes have historically been found in virtually every server
	ever run as <username>root</username>, including basic system servers.
	If you are running a machine through which people only login via
	<application>sshd</application> and never login via
	<application>telnetd</application> or
	<application>rshd</application> or
	<application>rlogind</application>, then turn off those
	services!</para>

      <para>&os; now defaults to running
	<application>ntalkd</application>,
	<application>comsat</application>, and
	<application>finger</application> in a sandbox.  Another program
	which may be a candidate for running in a sandbox is &man.named.8;.
	<filename>/etc/defaults/rc.conf</filename> includes the arguments
	necessary to run <application>named</application> in a sandbox in a
	commented-out form.  Depending on whether you are installing a new
	system or upgrading an existing system, the special user accounts
	used by these sandboxes may not be installed.  The prudent
	sysadmin would research and implement sandboxes for servers
	whenever possible.</para>
      <indexterm>
        <primary><application>sendmail</application></primary>
      </indexterm>

      <para>There are a number of other servers that typically do not run
	in sandboxes: <application>sendmail</application>,
	<application>popper</application>,
	<application>imapd</application>, <application>ftpd</application>,
	and others.  There are alternatives to some of these, but
	installing them may require more work than you are willing to
	perform (the convenience factor strikes again).  You may have to
	run these servers as <username>root</username> and rely on other
	mechanisms to detect break-ins that might occur through them.</para>

      <para>The other big potential <username>root</username> holes in a
	system are the
	suid-root and sgid binaries installed on the system.  Most of
	these binaries, such as <application>rlogin</application>, reside
	in <filename>/bin</filename>, <filename>/sbin</filename>,
	<filename>/usr/bin</filename>, or <filename>/usr/sbin</filename>.
	While nothing is 100% safe, the system-default suid and sgid
	binaries can be considered reasonably safe.  Still,
	<username>root</username> holes are occasionally found in these
	binaries.  A <username>root</username> hole was found in
	<literal>Xlib</literal> in 1998 that made
	<application>xterm</application> (which is typically suid)
	vulnerable.  It is better to be safe than sorry and the prudent
	sysadmin will restrict suid binaries, that only staff should run,
	to a special group that only staff can access, and get rid of
	(<command>chmod 000</command>) any suid binaries that nobody uses.
	A server with no display generally does not need an
	<application>xterm</application> binary.  Sgid binaries can be
	almost as dangerous.  If an intruder can break an sgid-kmem binary,
	the intruder might be able to read <filename>/dev/kmem</filename>
	and thus read the encrypted password file, potentially compromising
	any passworded account.  Alternatively an intruder who breaks
	group <literal>kmem</literal> can monitor keystrokes sent through
	ptys, including ptys used by users who login through secure
	methods.  An intruder that breaks the <groupname>tty</groupname>
	group can write to
	almost any user's tty.  If a user is running a terminal program or
	emulator with a keyboard-simulation feature, the intruder can
	potentially generate a data stream that causes the user's terminal
	to echo a command, which is then run as that user.</para>
    </sect2>

    <sect2 id="secure-users">
      <title>Securing User Accounts</title>

      <para>User accounts are usually the most difficult to secure.  While
	you can impose draconian access restrictions on your staff and
	<quote>star</quote> out their passwords, you may not be able to
	do so with any general user accounts you might have.  If you do
	have sufficient control, then you may win out and be able to secure
	the user accounts properly.  If not, you simply have to be more
	vigilant in your monitoring of those accounts.  Use of
	ssh and Kerberos for user accounts is
	more problematic, due to the extra administration and technical
	support required, but still a very good solution compared to a
	encrypted password file.</para>
    </sect2>

    <sect2>
      <title>Securing the Password File</title>

      <para>The only sure fire way is to star out as many
	passwords as you can and use ssh or
	Kerberos for access to those accounts.  Even though the encrypted
	password file (<filename>/etc/spwd.db</filename>) can only be read
	by <username>root</username>, it may be possible for an intruder
	to obtain read access to that file even if the attacker cannot
	obtain root-write access.</para>

      <para>Your security scripts should always check for and report
	changes to the password file (see the <link
	  linkend="security-integrity">Checking file integrity</link> section
	below).</para>
    </sect2>

    <sect2>
      <title>Securing the Kernel Core, Raw Devices, and
	File systems</title>

      <para>If an attacker breaks <username>root</username> he can do
        just about anything, but
	there are certain conveniences.  For example, most modern kernels
	have a packet sniffing device driver built in.  Under &os; it
	is called the <devicename>bpf</devicename> device.  An intruder
	will commonly attempt to run a packet sniffer on a compromised
	machine.  You do not need to give the intruder the capability and
	most systems do not have the need for the
	<devicename>bpf</devicename> device compiled in.</para>

      <indexterm>
        <primary><command>sysctl</command></primary>
      </indexterm>
      <para>But even if you turn off the <devicename>bpf</devicename>
	device, you still have
	<filename>/dev/mem</filename> and
	<filename>/dev/kmem</filename>
	to worry about.  For that matter, the intruder can still write to
	raw disk devices.  Also, there is another kernel feature called
	the module loader, &man.kldload.8;.  An enterprising intruder can
	use a KLD module to install his own <devicename>bpf</devicename>
	device, or other sniffing
	device, on a running kernel.  To avoid these problems you have to
	run the kernel at a higher secure level, at least securelevel 1.
	The securelevel can be set with a <command>sysctl</command> on
	the <varname>kern.securelevel</varname> variable.  Once you have
	set the securelevel to 1, write access to raw devices will be
	denied and special <command>chflags</command> flags,
	such as <literal>schg</literal>,
	will be enforced.  You must also ensure that the
	<literal>schg</literal> flag is set on critical startup binaries,
	directories, and script files &mdash; everything that gets run up
	to the point where the securelevel is set.  This might be overdoing
	it, and upgrading the system is much more difficult when you
	operate at a higher secure level.  You may compromise and run the
	system at a higher secure level but not set the
	<literal>schg</literal> flag for every system file and directory
	under the sun.  Another possibility is to simply mount
	<filename>/</filename> and <filename>/usr</filename> read-only.
	It should be noted that being too draconian in what you attempt to
	protect may prevent the all-important detection of an
	intrusion.</para>
    </sect2>

    <sect2 id="security-integrity">
      <title>Checking File Integrity: Binaries, Configuration Files,
	Etc.</title>

      <para>When it comes right down to it, you can only protect your core
	system configuration and control files so much before the
	convenience factor rears its ugly head.  For example, using
	<command>chflags</command> to set the <literal>schg</literal> bit
	on most of the files in <filename>/</filename> and
	<filename>/usr</filename> is probably counterproductive, because
	while it may protect the files, it also closes a detection window.
	The last layer of your security onion is perhaps the most
	important &mdash; detection.  The rest of your security is pretty
	much useless (or, worse, presents you with a false sense of
	security) if you cannot detect potential intrusions.  Half the job
	of the onion is to slow down the attacker, rather than stop him, in
	order to be able to catch him in the act.</para>

      <para>The best way to detect an intrusion is to look for modified,
	missing, or unexpected files.  The best way to look for modified
	files is from another (often centralized) limited-access system.
	Writing your security scripts on the extra-secure limited-access
	system makes them mostly invisible to potential attackers, and this
	is important.  In order to take maximum advantage you generally
	have to give the limited-access box significant access to the
	other machines in the business, usually either by doing a
	read-only NFS export of the other machines to the limited-access
	box, or by setting up ssh key-pairs to
	allow the limited-access box to ssh to
	the other machines.  Except for its network traffic, NFS is the
	least visible method &mdash; allowing you to monitor the
	file systems on each client box virtually undetected.  If your
	limited-access server is connected to the client boxes through a
	switch, the NFS method is often the better choice.  If your
	limited-access server is connected to the client boxes through a
	hub, or through several layers of routing, the NFS method may be
	too insecure (network-wise) and using
	ssh may be the better choice even with
	the audit-trail tracks that ssh
	lays.</para>

      <para>Once you have given a limited-access box at least read access to the
	client systems it is supposed to monitor, you must write scripts
	to do the actual monitoring.  Given an NFS mount, you can write
	scripts out of simple system utilities such as &man.find.1; and
	&man.md5.1;.  It is best to physically md5 the client-box files
	at least once a day, and to test control files such as those
	found in <filename>/etc</filename> and
	<filename>/usr/local/etc</filename> even more often.  When
	mismatches are found, relative to the base md5 information the
	limited-access machine knows is valid, it should scream at a
	sysadmin to go check it out.  A good security script will also
	check for inappropriate suid binaries and for new or deleted files
	on system partitions such as <filename>/</filename> and
	<filename>/usr</filename>.</para>

      <para>When using ssh rather than NFS,
	writing the security script is much more difficult.   You
	essentially have to <command>scp</command> the scripts to the client
	box in order to
	run them, making them visible, and for safety you also need to
	<command>scp</command> the binaries (such as find) that those
	scripts use.  The <application>ssh</application> client on the
	client box may already be compromised.  All in all, using
	ssh may be necessary when running over
	insecure links, but it is also a lot harder to deal with.</para>

      <para>A good security script will also check for changes to user and
	staff members access configuration files:
	<filename>.rhosts</filename>, <filename>.shosts</filename>,
	<filename>.ssh/authorized_keys</filename> and so forth,
	files that might fall outside the purview of the
	<literal>MD5</literal> check.</para>

      <para>If you have a huge amount of user disk space, it may take too
	long to run through every file on those partitions.  In this case,
	setting mount flags to disallow suid binaries and devices on those
	partitions is a good idea.  The <literal>nodev</literal> and
	<literal>nosuid</literal> options (see &man.mount.8;) are what you
	want to look into.  You should probably scan them anyway, at least
	once a week, since the object of this layer is to detect a break-in
	attempt, whether or not the attempt succeeds.</para>

      <para>Process accounting (see &man.accton.8;) is a relatively
	low-overhead feature of the operating system which might help
	as a post-break-in evaluation mechanism.  It is especially
	useful in tracking down how an intruder has actually broken into
	a system, assuming the file is still intact after the break-in has
	occured.</para>

      <para>Finally, security scripts should process the log files, and the
	logs themselves should be generated in as secure a manner as
	possible &mdash; remote syslog can be very useful.  An intruder
	will try to cover his tracks, and log files are critical to the
	sysadmin trying to track down the time and method of the initial
	break-in.  One way to keep a permanent record of the log files is
	to run the system console to a serial port and collect the
	information to a secure machine monitoring the consoles.</para>
    </sect2>

    <sect2>
      <title>Paranoia</title>

      <para>A little paranoia never hurts.  As a rule, a sysadmin can add
	any number of security features, as long as they do not affect
	convenience, and can add security features that
	<emphasis>do</emphasis> affect convenience with some added thought.
	Even more importantly, a security administrator should mix it up a
	bit &mdash; if you use recommendations such as those given by this
	document verbatim, you give away your methodologies to the
	prospective attacker who also has access to this document.</para>
    </sect2>

    <sect2>
      <title>Denial of Service Attacks</title>
      <indexterm><primary>Denial of Service (DoS)</primary></indexterm>

      <para>This section covers Denial of Service attacks.  A DoS attack
	is typically a packet attack.  While there is not much you can do
	about modern spoofed packet attacks that saturate your network,
	you can generally limit the damage by ensuring that the attacks
	cannot take down your servers by:</para>

      <orderedlist>
	<listitem>
	  <para>Limiting server forks.</para>
	</listitem>

	<listitem>
	  <para>Limiting springboard attacks (ICMP response attacks, ping
	    broadcast, etc.).</para>
	</listitem>

	<listitem>
	  <para>Overloading the Kernel Route Cache.</para>
	</listitem>
      </orderedlist>

      <para>A common DoS attack scenario is attacking a forking server and
	making it spawning so many child processes that the host system
	eventually runs out of memory, file descriptors, etc. and then
	grinds to a halt.  <application>inetd</application>
	(see &man.inetd.8;) has several
	options to limit this sort of attack.  It should be noted that
	while it is possible to prevent a machine from going down, it is
	not generally possible to prevent a service from being disrupted
	by the attack.  Read the <application>inetd</application> manual
	page carefully and pay
	specific attention to the <option>-c</option>, <option>-C</option>,
	and <option>-R</option> options.  Note that spoofed-IP attacks
	will circumvent the <option>-C</option> option to
	<application>inetd</application>, so
	typically a combination of options must be used.  Some standalone
	servers have self-fork-limitation parameters.</para>

      <para><application>Sendmail</application> has its
	<option>-OMaxDaemonChildren</option> option, which tends to work
	much better than trying to use <application>Sendmail</application>'s load limiting options
	due to the load lag.  You should specify a
	<literal>MaxDaemonChildren</literal> parameter, when you start
	<application>sendmail</application>; high enough to handle your
	expected load, but not so high that the computer cannot handle that
	number of <application>Sendmail</application> instances without falling on
	its face.  It is also prudent to run <application>Sendmail</application> in queued mode
	(<option>-ODeliveryMode=queued</option>) and to run the daemon
	(<command>sendmail -bd</command>) separate from the queue-runs
	(<command>sendmail -q15m</command>).  If you still want real-time
	delivery you can run the queue at a much lower interval, such as
	<option>-q1m</option>, but be sure to specify a reasonable
	<literal>MaxDaemonChildren</literal> option for
	<emphasis>that</emphasis> <application>Sendmail</application> to prevent cascade failures.</para>

      <para><application>Syslogd</application> can be attacked directly
	and it is strongly recommended that you use the <option>-s</option>
	option whenever possible, and the <option>-a</option> option
	otherwise.</para>

      <para>You should also be fairly careful with connect-back services
	such as <application>TCP Wrapper</application>'s reverse-identd,
	which can be attacked directly.  You generally do not want to use
	the reverse-ident feature of
	<application>TCP Wrapper</application> for this reason.</para>

      <para>It is a very good idea to protect internal services from
	external access by firewalling them off at your border routers.
	The idea here is to prevent saturation attacks from outside your
	LAN, not so much to protect internal services from network-based
	<username>root</username> compromise.
	Always configure an exclusive firewall, i.e.,
	<quote>firewall everything <emphasis>except</emphasis> ports A, B,
	C, D, and M-Z</quote>.  This way you can firewall off all of your
	low ports except for certain specific services such as
	<application>named</application> (if you are primary for a zone),
	<application>ntalkd</application>,
	<application>sendmail</application>, and other Internet-accessible
	services.  If you try to configure the firewall the other way
	&mdash; as an inclusive or permissive firewall, there is a good
	chance that you will forget to <quote>close</quote> a couple of
	services, or that you will add a new internal service and forget
	to update the firewall.  You can still open up the high-numbered
	port range on the firewall, to allow permissive-like operation,
	without compromising your low ports.  Also take note that &os;
	allows you to control the range of port numbers used for dynamic
	binding, via the various <varname>net.inet.ip.portrange</varname>
	<command>sysctl</command>'s (<command>sysctl -a | fgrep
	portrange</command>), which can also ease the complexity of your
	firewall's configuration.  For example, you might use a normal
	first/last range of 4000 to 5000, and a hiport range of 49152 to
	65535, then block off everything under 4000 in your firewall
	(except for certain specific Internet-accessible ports, of
	course).</para>

      <para>Another common DoS attack is called a springboard attack
	&mdash; to attack a server in a manner that causes the server to
	generate responses which overloads the server, the local
	network, or some other machine.  The most common attack of this
	nature is the <emphasis>ICMP ping broadcast attack</emphasis>.
	The attacker spoofs ping packets sent to your LAN's broadcast
	address with the source IP address set to the actual machine they
	wish to attack.  If your border routers are not configured to
	stomp on ping packets to broadcast addresses, your LAN winds up
	generating sufficient responses to the spoofed source address to
	saturate the victim, especially when the attacker uses the same
	trick on several dozen broadcast addresses over several dozen
	different networks at once.  Broadcast attacks of over a hundred
	and twenty megabits have been measured.  A second common
	springboard attack is against the ICMP error reporting system.
	By constructing packets that generate ICMP error responses, an
	attacker can saturate a server's incoming network and cause the
	server to saturate its outgoing network with ICMP responses.  This
	type of attack can also crash the server by running it out of
	memory, especially if the server cannot drain the ICMP responses
	it generates fast enough.
	Use the <application>sysctl</application>
	variable <literal>net.inet.icmp.icmplim</literal> to limit these attacks.
	The last major class of springboard
	attacks is related to certain internal
	<application>inetd</application> services such as the
	udp echo service.  An attacker simply spoofs a UDP packet with the
	source address being server A's echo port, and the destination
	address being server B's echo port, where server A and B are both
	on your LAN.  The two servers then bounce this one packet back and
	forth between each other.  The attacker can overload both servers
	and their LANs simply by injecting a few packets in this manner.
	Similar problems exist with the internal
	<application>chargen</application> port.  A
	competent sysadmin will turn off all of these inetd-internal test
	services.</para>

      <para>Spoofed packet attacks may also be used to overload the kernel
	route cache.  Refer to the <varname>net.inet.ip.rtexpire</varname>,
	<varname>rtminexpire</varname>, and <varname>rtmaxcache</varname>
	<command>sysctl</command> parameters.  A spoofed packet attack
	that uses a random source IP will cause the kernel to generate a
	temporary cached route in the route table, viewable with
	<command>netstat -rna | fgrep W3</command>.  These routes
	typically timeout in 1600 seconds or so.  If the kernel detects
	that the cached route table has gotten too big it will dynamically
	reduce the <varname>rtexpire</varname> but will never decrease it
	to less than <varname>rtminexpire</varname>.  There are two
	problems:</para>

      <orderedlist>
	<listitem>
	  <para>The kernel does not react quickly enough when a lightly
	    loaded server is suddenly attacked.</para>
	</listitem>

	<listitem>
	  <para>The <varname>rtminexpire</varname> is not low enough for
	    the kernel to survive a sustained attack.</para>
	</listitem>
      </orderedlist>

      <para>If your servers are connected to the Internet via a T3 or
        better, it may be prudent to manually override both
	<varname>rtexpire</varname> and <varname>rtminexpire</varname>
	via &man.sysctl.8;.  Never set either parameter to zero (unless
	you want to crash the machine).  Setting both
	parameters to 2 seconds should be sufficient to protect the route
	table from attack.</para>
    </sect2>

    <sect2>
      <title>Access Issues with Kerberos and SSH</title>
      <indexterm><primary><command>ssh</command></primary></indexterm>
      <indexterm><primary>KerberosIV</primary></indexterm>

      <para>There are a few issues with both Kerberos and
	ssh that need to be addressed if
	you intend to use them.  Kerberos 5 is an excellent
	authentication protocol, but there are bugs in the kerberized
	<application>telnet</application> and
	<application>rlogin</application> applications that make them
	unsuitable for dealing with binary streams.  Also, by default
	Kerberos does not encrypt a session unless you use the
	<option>-x</option> option.  <application>ssh</application>
	encrypts everything by default.</para>

      <para>Ssh works quite well in every
	respect except that it forwards encryption keys by default.  What
	this means is that if you have a secure workstation holding keys
	that give you access to the rest of the system, and you
	ssh to an insecure machine, your keys
	are usable.  The actual keys themselves are not exposed, but
	ssh installs a forwarding port for the
	duration of your login, and if an attacker has broken
	<username>root</username> on the
	insecure machine he can utilize that port to use your keys to gain
	access to any other machine that your keys unlock.</para>

      <para>We recommend that you use ssh in
	combination with Kerberos whenever possible for staff logins.
	<application>Ssh</application> can be compiled with Kerberos
	support.  This reduces your reliance on potentially exposed
	ssh keys while at the same time
	protecting passwords via Kerberos.  Ssh
	keys should only be used for automated tasks from secure machines
	(something that Kerberos is unsuited to do).  We also recommend that
	you either turn off key-forwarding in the
	ssh configuration, or that you make use
	of the <literal>from=IP/DOMAIN</literal> option that
	ssh allows in its
	<filename>authorized_keys</filename> file to make the key only
	usable to entities logging in from specific machines.</para>
    </sect2>
  </sect1>

  <sect1 id="crypt">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Bill</firstname>
	  <surname>Swingle</surname>
	  <contrib>Parts rewritten and updated by </contrib>
	</author>
      </authorgroup>
      <!-- 21 Mar 2000 -->
    </sect1info>

    <title>DES, MD5, and Crypt</title>
    <indexterm>
      <primary>security</primary>
      <secondary>crypt</secondary>
    </indexterm>

    <indexterm><primary>crypt</primary></indexterm>
    <indexterm><primary>DES</primary></indexterm>
    <indexterm><primary>MD5</primary></indexterm>

    <para>Every user on a &unix; system has a password associated with
      their account.  It seems obvious that these passwords need to be
      known only to the user and the actual operating system.  In
      order to keep these passwords secret, they are encrypted with
      what is known as a <quote>one-way hash</quote>, that is, they can
      only be easily encrypted but not decrypted.  In other words, what
      we told you a moment ago was obvious is not even true:  the
      operating system itself does not <emphasis>really</emphasis> know
      the password.  It only knows the <emphasis>encrypted</emphasis>
      form of the password.  The only way to get the
      <quote>plain-text</quote> password is by a brute force search of the
      space of possible passwords.</para>

    <para>Unfortunately the only secure way to encrypt passwords when
      &unix; came into being was based on DES, the Data Encryption
      Standard.  This was not such a problem for users resident in
      the US, but since the source code for DES could not be exported
      outside the US, &os; had to find a way to both comply with
      US law and retain compatibility with all the other &unix;
      variants that still used DES.</para>

    <para>The solution was to divide up the encryption libraries
      so that US users could install the DES libraries and use
      DES but international users still had an encryption method
      that could be exported abroad.  This is how &os; came to
      use MD5 as its default encryption method.  MD5 is believed to
      be more secure than DES, so installing DES is offered primarily
      for compatibility reasons.</para>

    <sect2>
      <title>Recognizing Your Crypt Mechanism</title>

      <para>Currently the library supports DES, MD5 and Blowfish hash
	functions.  By default &os; uses MD5 to encrypt
	passwords.</para>

      <para>It is pretty easy to identify which encryption method
	&os; is set up to use.  Examining the encrypted passwords in
	the <filename>/etc/master.passwd</filename> file is one way.
	Passwords encrypted with the MD5 hash are longer than those
	encrypted with the DES hash and also begin with the characters
	<literal>&dollar;1&dollar;</literal>.  Passwords starting with
	<literal>&dollar;2a&dollar;</literal> are encrypted with the
	Blowfish hash function.  DES password strings do not
	have any particular identifying characteristics, but they are
	shorter than MD5 passwords, and are coded in a 64-character
	alphabet which does not include the <literal>&dollar;</literal>
	character, so a relatively short string which does not begin with
	a dollar sign is very likely a DES password.</para>

      <para>The password format used for new passwords is controlled
	by the <literal>passwd_format</literal> login capability in
	<filename>/etc/login.conf</filename>, which takes values of
	<literal>des</literal>, <literal>md5</literal> or
	<literal>blf</literal>.  See the &man.login.conf.5; manual page
	for more information about login capabilities.</para>

    </sect2>
  </sect1>

  <sect1 id="one-time-passwords">
    <title>One-time Passwords</title>
    <indexterm><primary>one-time passwords</primary></indexterm>
    <indexterm>
      <primary>security</primary>
      <secondary>one-time passwords</secondary>
    </indexterm>

    <para>By default, &os; includes support for OPIE (One-time Passwords
      In Everything), which uses the MD5 hash by default.</para>

    <para>There are three different sorts of passwords which we will discuss
      below.  The first is your usual &unix; style or
      Kerberos password; we will call this a <quote>&unix; password</quote>.
      The second sort is the one-time password which is generated by the OPIE
      &man.opiekey.1; program and accepted by the
      &man.opiepasswd.1; program
      and the login prompt; we will
      call this a <quote>one-time password</quote>.  The final sort of
      password is the secret password which you give to the
      <command>opiekey</command> program (and
      sometimes the
      <command>opiepasswd</command> programs)
      which it uses to generate
      one-time passwords; we will call it a <quote>secret password</quote>
      or just unqualified <quote>password</quote>.</para>

    <para>The secret password does not have anything to do with your &unix;
      password; they can be the same but this is not recommended.
      OPIE secret passwords are not limited to 8 characters like old
      &unix; passwords<footnote><para>Under &os; the standard login
      password may be up to 128 characters in length.</para></footnote>,
      they can be as long as you like.  Passwords of six or
      seven word long phrases are fairly common.  For the most part, the
      OPIE system operates completely independently of the &unix;
      password system.</para>

    <para>Besides the password, there are two other pieces of data that
      are important to OPIE.  One is what is known as the
      <quote>seed</quote> or <quote>key</quote>, consisting of two letters
      and five digits.  The other is what is called the <quote>iteration
      count</quote>, a number between 1 and 100.  OPIE creates the
      one-time password by concatenating the seed and the secret password,
      then applying the MD5 hash as many times as specified by the
      iteration count and turning the result into six short English words.
      These six English words are your one-time password.  The
      authentication system (primarily PAM) keeps
      track of the last one-time password used, and the user is
      authenticated if the hash of the user-provided password is equal to
      the previous password.  Because a one-way hash is used it is
      impossible to generate future one-time passwords if a successfully
      used password is captured; the iteration count is decremented after
      each successful login to keep the user and the login program in
      sync.  When the iteration count gets down to 1, OPIE must be
      reinitialized.</para>

    <para>There are a few programs involved in each system
      which we will discuss below.  The
      <command>opiekey</command> program accepts an iteration
      count, a seed, and a secret password, and generates a one-time
      password or a consecutive list of one-time passwords.  The
      <command>opiepasswd</command>
      program is used to initialize OPIE,
      and to change passwords, iteration counts, or seeds; it
      takes either a secret passphrase, or an iteration count,
      seed, and a one-time password.  The
      <command>opieinfo</command> program will examine the
      relevant credentials files
      (<filename>/etc/opiekeys</filename>) and print out the invoking user's
      current iteration count and seed.</para>

    <para>There are four different sorts of operations we will cover.  The
      first is using
      <command>opiepasswd</command> over a secure connection to set up
      one-time-passwords for the first time,  or to change your password
      or seed.  The second operation is using
      <command>opiepasswd</command> over an insecure connection, in
      conjunction with <command>opiekey</command>
      over a secure connection,  to do the same.  The third is using
      <command>opiekey</command> to log in over
      an insecure connection.  The fourth is using
      <command>opiekey</command> to generate a number of keys which
      can be written down or printed out to carry with you when going to
      some location without secure connections to anywhere.</para>

    <sect2>
      <title>Secure Connection Initialization</title>
      <para>To initialize OPIE for the first time, execute the
        <command>opiepasswd</command> command:</para>

      <screen>&prompt.user; <userinput>opiepasswd -c</userinput>
[grimreaper] ~ $ opiepasswd -f -c
Adding unfurl:
Only use this method from the console; NEVER from remote. If you are using
telnet, xterm, or a dial-in, type ^C now or exit with no password.
Then run opiepasswd without the -c parameter.
Using MD5 to compute responses.
Enter new secret pass phrase:
Again new secret pass phrase:
ID unfurl OTP key is 499 to4268
MOS MALL GOAT ARM AVID COED
</screen>

      <para>At the <prompt>Enter new secret pass phrase:</prompt> or
        <prompt>Enter secret password:</prompt> prompts, you
	should enter a password or phrase.  Remember, this is not the
	password that you will use to login with, this is used to generate
	your one-time login keys.  The <quote>ID</quote> line gives the
	parameters of your particular instance: your login name, the
        iteration count, and seed.  When logging in the system
	will remember these parameters and present them back to you so you
	do not have to remember them.  The last line gives the particular
	one-time password which corresponds to those parameters and your
	secret password; if you were to re-login immediately, this
	one-time password is the one you would use.</para>
    </sect2>

    <sect2>
      <title>Insecure Connection Initialization</title>

      <para>To initialize or change your secret password over an
	insecure connection, you will need to already have a secure
	connection to some place where you can run
        <command>opiekey</command>; this might be in the form of a shell
	prompt on a machine you
	trust.  You will also need to make up an iteration count (100 is
	probably a good value), and you may make up your own seed or use a
	randomly-generated one.  Over on the insecure connection (to the
	machine you are initializing), use <command>opiepasswd</command>:</para>

      <screen>&prompt.user; <userinput>opiepasswd</userinput>

Updating unfurl:
You need the response from an OTP generator.
Old secret pass phrase:
        otp-md5 498 to4268 ext
        Response: GAME GAG WELT OUT DOWN CHAT
New secret pass phrase:
        otp-md5 499 to4269
        Response: LINE PAP MILK NELL BUOY TROY

ID mark OTP key is 499 gr4269
LINE PAP MILK NELL BUOY TROY
</screen>

      <para>To accept the default seed press <keycap>Return</keycap>.
	Then before entering an
	access password, move over to your secure connection and give it
	the same parameters:</para>

      <screen>&prompt.user; <userinput>opiekey 498 to4268</userinput>
Using the MD5 algorithm to compute response.
Reminder: Don't use opiekey from telnet or dial-in sessions.
Enter secret pass phrase:
GAME GAG WELT OUT DOWN CHAT
</screen>

      <para>Now switch back over to the insecure connection, and copy the
	one-time password generated over to the relevant program.</para>
    </sect2>

    <sect2>
      <title>Generating a Single One-time Password</title>

      <para>Once you have initialized OPIE and login, you will be
	presented with a prompt like this:</para>

<screen>&prompt.user; <userinput>telnet example.com</userinput>
Trying 10.0.0.1...
Connected to example.com
Escape character is '^]'.

FreeBSD/i386 (example.com) (ttypa)

login: <userinput>&lt;username&gt;</userinput>
otp-md5 498 gr4269 ext
Password: </screen>

      <para>As a side note, the OPIE prompts have a useful feature
	(not shown here): if you press <keycap>Return</keycap>
	at the password prompt, the
	prompter will turn echo on, so you can see what you are
	typing.  This can be extremely useful if you are attempting to
	type in a password by hand, such as from a printout.</para>

      <indexterm><primary>MS-DOS</primary></indexterm>
      <indexterm><primary>Windows</primary></indexterm>
      <indexterm><primary>MacOS</primary></indexterm>

      <para>At this point you need to generate your one-time password to
	answer this login prompt.  This must be done on a trusted system
	that you can run
        <command>opiekey</command> on.  (There are versions of these for DOS,
	&windows; and &macos; as well.) They need the iteration count and
	the seed as command line options.  You can cut-and-paste these
        right from the login prompt on the machine that you are logging
        in to.</para>

      <para>On the trusted system:</para>

      <screen>&prompt.user; <userinput>opiekey 498 to4268</userinput>
Using the MD5 algorithm to compute response.
Reminder: Don't use opiekey from telnet or dial-in sessions.
Enter secret pass phrase:
GAME GAG WELT OUT DOWN CHAT</screen>

      <para>Now that you have your one-time password you can continue
	logging in.</para>
    </sect2>

    <sect2>
      <title>Generating Multiple One-time Passwords</title>

      <para>Sometimes you have to go places where you do not have
	access to a trusted machine or secure connection.  In this case,
	it is possible to use the
	<command>opiekey</command> command to
	generate a number of one-time passwords beforehand to be printed
	out and taken with you.  For example:</para>

      <screen>&prompt.user; <userinput>opiekey -n 5 30 zz99999</userinput>
Using the MD5 algorithm to compute response.
Reminder: Don't use opiekey from telnet or dial-in sessions.
Enter secret pass phrase: <userinput>&lt;secret password&gt;</userinput>
26: JOAN BORE FOSS DES NAY QUIT
27: LATE BIAS SLAY FOLK MUCH TRIG
28: SALT TIN ANTI LOON NEAL USE
29: RIO ODIN GO BYE FURY TIC
30: GREW JIVE SAN GIRD BOIL PHI</screen>

      <para>The <option>-n 5</option> requests five keys in sequence, the
	<option>30</option> specifies what the last iteration number
	should be.  Note that these are printed out in
	<emphasis>reverse</emphasis> order of eventual use.  If you are
	really paranoid, you might want to write the results down by hand;
	otherwise you can cut-and-paste into <command>lpr</command>.  Note
	that each line shows both the iteration count and the one-time
	password; you may still find it handy to scratch off passwords as
	you use them.</para>
    </sect2>

    <sect2>
      <title>Restricting Use of &unix; Passwords</title>

      <para>OPIE can restrict the use of &unix; passwords based on the IP
	address of a login session.  The relevant file
	is <filename>/etc/opieaccess</filename>, which is present by default.
	Please check &man.opieaccess.5;
	for more information on this file and which security considerations
	you should be aware of when using it.</para>

      <para>Here is a sample <filename>opieaccess</filename> file:</para>

      <programlisting>permit 192.168.0.0 255.255.0.0</programlisting>

      <para>This line allows users whose IP source address (which is
	vulnerable to spoofing) matches the specified value and mask,
	to use &unix; passwords at any time.</para>

      <para>If no rules in <filename>opieaccess</filename> are matched,
	the default is to deny non-OPIE logins.</para>

    </sect2>
  </sect1>

  <sect1 id="tcpwrappers">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Written by: </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title>TCP Wrappers</title>

    <indexterm><primary>TCP Wrappers</primary></indexterm>

    <para>Anyone familiar with &man.inetd.8; has probably heard
      of <acronym>TCP</acronym> Wrappers at some point.  But few
      individuals seem to fully comprehend its usefulness in a
      network environment.  It seems that everyone wants to
      install a firewall to handle network connections.  While a
      firewall has a wide variety of uses, there are some things
      that a firewall not handle such as sending text back to the
      connection originator.  The <acronym>TCP</acronym> software
      does this and much more.  In the next few sections many of
      the <acronym>TCP</acronym> Wrappers features will be discussed,
      and, when applicable, example configuration lines will be
      provided.</para>

    <para>The <acronym>TCP</acronym> Wrappers software extends the
      abilities of <command>inetd</command> to provide support for
      every server daemon under its control.  Using this method it
      is possible to provide logging support, return messages to
      connections, permit a daemon to only accept internal connections,
      etc.  While some of these features can be provided by implementing
      a firewall, this will add not only an extra layer of protection
      but go beyond the amount of control a firewall can
      provide.</para>

    <para>The added functionality of <acronym>TCP</acronym> Wrappers
      should not be considered a replacement for a good firewall.
      <acronym>TCP</acronym> Wrappers can be used in conjunction
      with a firewall or other security enhancements though and
      it can serve nicely as an extra layer of protection
      for the system.</para>

    <para>Since this is an extension to the configuration of
      <command>inetd</command>, the reader is expected have
      read the <link linkend="network-inetd">inetd configuration</link>
      section.</para>

    <note>
      <para>While programs run by &man.inetd.8; are not exactly
	<quote>daemons</quote>, they have traditionally been called
	daemons.  This is the term we will use in this section too.</para>
    </note>

    <sect2>
      <title>Initial Configuration</title>

      <para>The only requirement of using <acronym>TCP</acronym>
	Wrappers in &os; is to ensure the <command>inetd</command>
	server is started from <filename>rc.conf</filename> with the
	<option>-Ww</option> option; this is the default setting.  Of
	course,	proper configuration of
	<filename>/etc/hosts.allow</filename> is also expected, but
	&man.syslogd.8; will throw messages in the system logs in
	these cases.</para>

      <note>
	<para>Unlike other implementations of <acronym>TCP</acronym>
	  Wrappers, the use of <filename>hosts.deny</filename> has
	  been deprecated.  All configuration options should be placed
	  in <filename>/etc/hosts.allow</filename>.</para>
      </note>

      <para>In the simplest configuration, daemon connection policies
	are set to either be permitted or blocked depending on the
	options in <filename>/etc/hosts.allow</filename>.  The default
	configuration in &os; is to allow a connection to every daemon
	started with <command>inetd</command>.  Changing this will be
	discussed only after the basic configuration is covered.</para>

      <para>Basic configuration usually takes the form of
	<literal>daemon : address : action</literal>.  Where
	<literal>daemon</literal> is the daemon name which
	<command>inetd</command> started.  The
	<literal>address</literal> can be a valid hostname, an
	<acronym>IP</acronym> address or an IPv6 address enclosed in
	brackets ([&nbsp;]).  The action field can be either allow
	or deny	to grant or deny access appropriately.  Keep in mind
	that configuration works off a first rule match semantic,
	meaning that the configuration file is scanned in ascending
	order for a matching rule.  When a match is found the rule
	is applied and the search process will halt.</para>

      <para>Several other options exist but they will be explained
	in a later section.  A simple configuration line may easily be
	constructed from that information alone.  For example, to
	allow <acronym>POP</acronym>3 connections via the
	<filename role="package">mail/qpopper</filename> daemon,
	the following lines should be appended to
	<filename>hosts.allow</filename>:</para>

      <programlisting># This line is required for POP3 connections:
qpopper : ALL : allow</programlisting>

      <para>After adding this line, <command>inetd</command> will need
	restarted.  This can be accomplished by use of the &man.kill.1;
	command, or with the <parameter>restart</parameter> parameter
	with <filename>/etc/rc.d/inetd</filename>.</para>
      </sect2>

      <sect2>
        <title>Advanced Configuration</title>

      <para><acronym>TCP</acronym> Wrappers has advanced
	options too; they will allow for more control over the
	way connections are handled.  In some cases it may be
	a good idea to return a comment to certain hosts or
	daemon connections.  In other cases, perhaps a log file
	should be recorded or an email sent to the administrator.
	Other situations may require the use of a service for local
	connections only.  This	is all possible through the use of
	configuration options known as <literal>wildcards</literal>,
	expansion characters and external command execution.  The
	next two sections are written to cover these situations.</para>

      <sect3>
	<title>External Commands</title>

	<para>Suppose that a situation occurs where a connection
	  should be denied yet a reason should be sent to the
	  individual who attempted to establish that connection.  How
	  could it be done?  That action can be made possible by
	  using the <option>twist</option> option.  When a connection
	  attempt is made, <option>twist</option> will be called to
	  execute a shell command or script.  An example already exists
	  in the <filename>hosts.allow</filename> file:</para>

	<programlisting># The rest of the daemons are protected.
ALL : ALL \
        : severity auth.info \
        : twist /bin/echo "You are not welcome to use %d from %h."</programlisting>

	<para>This example shows that the message,
	  <quote>You are not allowed to use <literal>daemon</literal>
	  from <literal>hostname</literal>.</quote> will be returned
	  for any daemon not previously configured in the access file.
	  This is extremely useful for sending a reply back to the
	  connection initiator right after the established connection
	  is dropped.  Note that any message returned
	  <emphasis>must</emphasis> be wrapped in quote
	  <literal>"</literal> characters; there are no exceptions to
	  this rule.</para>

	<warning>
	  <para>It may be possible to launch a denial of service attack
	    on the server if an attacker, or group of attackers could
	    flood these daemons with connection requests.</para>
	</warning>

	<para>Another possibility is to use the <option>spawn</option>
	  option in these cases.  Like <option>twist</option>, the
	  <option>spawn</option> implicitly denies the connection and
	  may be used to run external shell commands or scripts.
	  Unlike <option>twist</option>, <option>spawn</option> will
	  not send a reply back to the individual who established the
	  connection.  For an example, consider the following
	  configuration line:</para>

	<programlisting># We do not allow connections from example.com:
ALL : .example.com \
	: spawn (/bin/echo %a from %h attempted to access %d &gt;&gt; \
	  /var/log/connections.log) \
	: deny</programlisting>

	<para>This will deny all connection attempts from the
	  <hostid role="fqdn">*.example.com</hostid> domain;
	  simultaneously logging the hostname, <acronym>IP</acronym>
	  address and the daemon which they attempted to access in the
	  <filename>/var/log/connections.log</filename> file.</para>

	<para>Aside from the already explained substitution characters
	  above, e.g. %a, a few others exist.  See the
	  &man.hosts.access.5; manual page for the complete list.</para>
      </sect3>

      <sect3>
	<title>Wildcard Options</title>

	<para>Thus far the <literal>ALL</literal> example has been used
	  continuously throughout the examples.  Other options exist
	  which could extend the functionality a bit further.  For
	  instance, <literal>ALL</literal> may be used to match every
	  instance of either a daemon, domain or an
	  <acronym>IP</acronym> address. Another wildcard available is
	  <literal>PARANOID</literal> which may be used to match any
	  host which provides an <acronym>IP</acronym> address that may
	  be forged.  In other words, <literal>paranoid</literal> may
	  be used to define an action to be taken whenever a connection
	  is made from an <acronym>IP</acronym> address that differs
	  from its hostname.  The following example may shed some more
	  light on this discussion:</para>

	<programlisting># Block possibly spoofed requests to sendmail:
sendmail : PARANOID : deny</programlisting>

	<para>In that example all connection requests to
	  <command>sendmail</command> which have an
	  <acronym>IP</acronym> address that varies from its hostname
	  will be denied.</para>

	<caution>
	  <para>Using the <literal>PARANOID</literal> may severely
	    cripple servers if the client or server has a broken
	    <acronym>DNS</acronym> setup.  Administrator discretion
	    is advised.</para>
	</caution>

	<para>To learn more about wildcards and their associated
	  functionality, see the &man.hosts.access.5; manual
	  page.</para>

	<para>Before any of the specific configuration lines above will
	  work, the first configuration line should be commented out
	  in <filename>hosts.allow</filename>.  This was noted at the
	  beginning of this section.</para>
      </sect3>
    </sect2>
  </sect1>

  <sect1 id="kerberosIV">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Mark</firstname>
	  <surname>Murray</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
      <authorgroup>
	<author>
	  <firstname>Mark</firstname>
	  <surname>Dapoz</surname>
	  <contrib>Based on a contribution by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title><application>KerberosIV</application></title>

    <para>Kerberos is a network add-on system/protocol that allows users to
      authenticate themselves through the services of a secure server.
      Services such as remote login, remote copy, secure inter-system file
      copying and other high-risk tasks are made considerably safer and more
      controllable.</para>

    <para>The following instructions can be used as a guide on how to set up
      Kerberos as distributed for &os;. However, you should refer to the
      relevant manual pages for a complete description.</para>

    <sect2>
      <title>Installing <application>KerberosIV</application></title>

      <indexterm><primary>MIT</primary></indexterm>
      <indexterm>
	<primary>KerberosIV</primary>
	<secondary>installing</secondary>
      </indexterm>
      <para>Kerberos is an optional component of &os;.  The easiest
        way to install this software is by selecting the <literal>krb4</literal> or
        <literal>krb5</literal> distribution in <application>sysinstall</application>
        during the initial installation of &os;. This will install
        the <quote>eBones</quote> (KerberosIV) or <quote>Heimdal</quote> (Kerberos5)
        implementation of Kerberos.  These implementations are
        included because they are developed outside the USA/Canada and
        were thus available to system owners outside those countries
        during the era of restrictive export controls on cryptographic
        code from the USA.</para>

      <para>Alternatively, the MIT implementation of Kerberos is
        available from the Ports Collection as
        <filename role="package">security/krb5</filename>.</para>
    </sect2>

    <sect2>
      <title>Creating the Initial Database</title>

      <para>This is done on the Kerberos server only.  First make sure that
	you do not have any old Kerberos databases around.  You should change
	to the directory <filename>/etc/kerberosIV</filename> and check that
	only the following files are present:</para>

      <screen>&prompt.root; <userinput>cd /etc/kerberosIV</userinput>
&prompt.root; <userinput>ls</userinput>
README		krb.conf        krb.realms</screen>

      <para>If any additional files (such as <filename>principal.*</filename>
	or <filename>master_key</filename>) exist, then use the
	<command>kdb_destroy</command> command to destroy the old Kerberos
	database, or if Kerberos is not running, simply delete the extra
	files.</para>

      <para>You should now edit the <filename>krb.conf</filename> and
	<filename>krb.realms</filename> files to define your Kerberos realm.
	In this case the realm will be <literal>EXAMPLE.COM</literal> and the
	server is <hostid role="fqdn">grunt.example.com</hostid>.  We edit
	or create the <filename>krb.conf</filename> file:</para>

      <screen>&prompt.root; <userinput>cat krb.conf</userinput>
EXAMPLE.COM
EXAMPLE.COM grunt.example.com admin server
CS.BERKELEY.EDU okeeffe.berkeley.edu
ATHENA.MIT.EDU kerberos.mit.edu
ATHENA.MIT.EDU kerberos-1.mit.edu
ATHENA.MIT.EDU kerberos-2.mit.edu
ATHENA.MIT.EDU kerberos-3.mit.edu
LCS.MIT.EDU kerberos.lcs.mit.edu
TELECOM.MIT.EDU bitsy.mit.edu
ARC.NASA.GOV trident.arc.nasa.gov</screen>

      <para>In this case, the other realms do not need to be there.  They are
	here as an example of how a machine may be made aware of multiple
	realms.  You may wish to not include them for simplicity.</para>

      <para>The first line names the realm in which this system works.  The
	other lines contain realm/host entries.  The first item on a line is a
	realm, and the second is a host in that realm that is acting as a
	<quote>key distribution center</quote>.  The words <literal>admin
	  server</literal> following a host's name means that host also
	provides an administrative database server.  For further explanation
	of these terms, please consult the Kerberos manual pages.</para>

      <para>Now we have to add <hostid role="fqdn">grunt.example.com</hostid>
	to the <literal>EXAMPLE.COM</literal> realm and also add an entry to
	put all hosts in the <hostid role="domainname">.example.com</hostid>
	domain in the <literal>EXAMPLE.COM</literal> realm.  The
	<filename>krb.realms</filename> file would be updated as
	follows:</para>

      <screen>&prompt.root; <userinput>cat krb.realms</userinput>
grunt.example.com EXAMPLE.COM
.example.com EXAMPLE.COM
.berkeley.edu CS.BERKELEY.EDU
.MIT.EDU ATHENA.MIT.EDU
.mit.edu ATHENA.MIT.EDU</screen>

      <para>Again, the other realms do not need to be there.  They are here as
	an example of how a machine may be made aware of multiple realms.  You
	may wish to remove them to simplify things.</para>

      <para>The first line puts the <emphasis>specific</emphasis> system into
	the named realm.  The rest of the lines show how to default systems of
	a particular subdomain to a named realm.</para>

      <para>Now we are ready to create the database.  This only needs to run
	on the Kerberos server (or Key Distribution Center).  Issue the
	<command>kdb_init</command> command to do this:</para>

      <screen>&prompt.root; <userinput>kdb_init</userinput>
<prompt>Realm name [default  ATHENA.MIT.EDU ]:</prompt> <userinput>EXAMPLE.COM</userinput>
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.

<prompt>Enter Kerberos master key:</prompt> </screen>

      <para>Now we have to save the key so that servers on the local machine
	can pick it up.  Use the <command>kstash</command> command to do
	this:</para>

      <screen>&prompt.root; <userinput>kstash</userinput>

<prompt>Enter Kerberos master key:</prompt>

Current Kerberos master key version is 1.

Master key entered. BEWARE!</screen>

      <para>This saves the encrypted master password in
	<filename>/etc/kerberosIV/master_key</filename>.</para>
    </sect2>

    <sect2>
      <title>Making It All Run</title>

      <indexterm>
	<primary>KerberosIV</primary>
	<secondary>initial startup</secondary>
      </indexterm>

      <para>Two principals need to be added to the database for
	<emphasis>each</emphasis> system that will be secured with Kerberos.
	Their names are <literal>kpasswd</literal> and <literal>rcmd</literal>.
	These two principals are made for each system, with the instance being
	the name of the individual system.</para>

      <para>These daemons, <application>kpasswd</application> and
	<application>rcmd</application> allow other systems to change Kerberos
	passwords and run commands like &man.rcp.1;,
	&man.rlogin.1; and &man.rsh.1;.</para>

      <para>Now let us add these entries:</para>

      <screen>&prompt.root; <userinput>kdb_edit</userinput>
Opening database...

<prompt>Enter Kerberos master key:</prompt>

Current Kerberos master key version is 1.

Master key entered.  BEWARE!
Previous or default values are in [brackets] ,
enter return to leave the same, or new value.

<prompt>Principal name:</prompt> <userinput>passwd</userinput>
<prompt>Instance:</prompt> <userinput>grunt</userinput>

&lt;Not found&gt;, <prompt>Create [y] ?</prompt> <userinput>y</userinput>

Principal: passwd, Instance: grunt, kdc_key_ver: 1
<prompt>New Password:</prompt>                    &lt;---- enter RANDOM here
Verifying password

<prompt>New Password:</prompt> &lt;---- enter RANDOM here

<prompt>Random password [y] ?</prompt> <userinput>y</userinput>

Principal's new key version = 1
<prompt>Expiration date (enter yyyy-mm-dd) [ 2000-01-01 ] ?</prompt>
<prompt>Max ticket lifetime (*5 minutes) [ 255 ] ?</prompt>
<prompt>Attributes [ 0 ] ?</prompt>
Edit O.K.
<prompt>Principal name:</prompt> <userinput>rcmd</userinput>
<prompt>Instance:</prompt> <userinput>grunt</userinput>

&lt;Not found&gt;, <prompt>Create [y] ?</prompt>

Principal: rcmd, Instance: grunt, kdc_key_ver: 1
<prompt>New Password:</prompt>		&lt;---- enter RANDOM here
Verifying password

<prompt>New Password:</prompt>           &lt;---- enter RANDOM here

<prompt>Random password [y] ?</prompt>

Principal's new key version = 1
<prompt>Expiration date (enter yyyy-mm-dd) [ 2000-01-01 ] ?</prompt>
<prompt>Max ticket lifetime (*5 minutes) [ 255 ] ?</prompt>
<prompt>Attributes [ 0 ] ?</prompt>
Edit O.K.
<prompt>Principal name:</prompt>         &lt;---- null entry here will cause an exit</screen>
    </sect2>

    <sect2>
      <title>Creating the Server File</title>

      <para>We now have to extract all the instances which define the
	services on each machine.  For this we use the
	<command>ext_srvtab</command> command.  This will create a file
	which must be copied or moved <emphasis>by secure
	  means</emphasis> to each Kerberos client's
	<filename>/etc</filename> directory.  This file must
	be present on each server and client, and is crucial to the
	operation of Kerberos.</para>


      <screen>&prompt.root; <userinput>ext_srvtab grunt</userinput>
<prompt>Enter Kerberos master key:</prompt>

Current Kerberos master key version is 1.

Master key entered. BEWARE!
Generating 'grunt-new-srvtab'....</screen>

      <para>Now, this command only generates a temporary file which must be
	renamed to <filename>srvtab</filename> so that all the servers can pick
	it up.  Use the &man.mv.1; command to move it into place on
	the original system:</para>

      <screen>&prompt.root; <userinput>mv grunt-new-srvtab srvtab</userinput></screen>

      <para>If the file is for a client system, and the network is not deemed
	safe, then copy the
	<filename><replaceable>client</replaceable>-new-srvtab</filename> to
	removable media and transport it by secure physical means.  Be sure to
	rename it to <filename>srvtab</filename> in the client's
	<filename>/etc</filename> directory, and make sure it is
	mode 600:</para>

      <screen>&prompt.root; <userinput>mv grumble-new-srvtab srvtab</userinput>
&prompt.root; <userinput>chmod 600 srvtab</userinput></screen>
    </sect2>

    <sect2>
      <title>Populating the Database</title>

      <para>We now have to add some user entries into the database.  First
	let us create an entry for the user <username>jane</username>.  Use the
	<command>kdb_edit</command> command to do this:</para>

      <screen>&prompt.root; <userinput>kdb_edit</userinput>
Opening database...

<prompt>Enter Kerberos master key:</prompt>

Current Kerberos master key version is 1.

Master key entered.  BEWARE!
Previous or default values are in [brackets] ,
enter return to leave the same, or new value.

<prompt>Principal name:</prompt> <userinput>jane</userinput>
<prompt>Instance:</prompt>

&lt;Not found&gt;, <prompt>Create [y] ?</prompt> <userinput>y</userinput>

Principal: jane, Instance: , kdc_key_ver: 1
<prompt>New Password:</prompt>                &lt;---- enter a secure password here
Verifying password

<prompt>New Password:</prompt>                &lt;---- re-enter the password here
Principal's new key version = 1
<prompt>Expiration date (enter yyyy-mm-dd) [ 2000-01-01 ] ?</prompt>
<prompt>Max ticket lifetime (*5 minutes) [ 255 ] ?</prompt>
<prompt>Attributes [ 0 ] ?</prompt>
Edit O.K.
<prompt>Principal name:</prompt>		   &lt;---- null entry here will cause an exit</screen>
    </sect2>

    <sect2>
      <title>Testing It All Out</title>

      <para>First we have to start the Kerberos daemons.  Note that if you
	have correctly edited your <filename>/etc/rc.conf</filename> then this
	will happen automatically when you reboot.  This is only necessary on
	the Kerberos server.  Kerberos clients will automatically get what
	they need from the <filename>/etc/kerberosIV</filename>
	directory.</para>

      <screen>&prompt.root; <userinput>kerberos &amp;</userinput>
Kerberos server starting
Sleep forever on error
Log file is /var/log/kerberos.log
Current Kerberos master key version is 1.

Master key entered. BEWARE!

Current Kerberos master key version is 1
Local realm: EXAMPLE.COM
&prompt.root; <userinput>kadmind -n &amp;</userinput>
KADM Server KADM0.0A initializing
Please do not use 'kill -9' to kill this job, use a
regular kill instead

Current Kerberos master key version is 1.

Master key entered.  BEWARE!</screen>

      <para>Now we can try using the <command>kinit</command> command to get a
	ticket for the ID <username>jane</username> that we created
	above:</para>

      <screen>&prompt.user; <userinput>kinit jane</userinput>
MIT Project Athena (grunt.example.com)
Kerberos Initialization for "jane"
<prompt>Password:</prompt> </screen>

      <para>Try listing the tokens using <command>klist</command> to see if we
	really have them:</para>

      <screen>&prompt.user; <userinput>klist</userinput>
Ticket file:    /tmp/tkt245
Principal:      jane@EXAMPLE.COM

  Issued           Expires          Principal
Apr 30 11:23:22  Apr 30 19:23:22  krbtgt.EXAMPLE.COM@EXAMPLE.COM</screen>

      <para>Now try changing the password using &man.passwd.1; to
	check if the <application>kpasswd</application> daemon can get
	authorization to the Kerberos database:</para>

      <screen>&prompt.user; <userinput>passwd</userinput>
realm EXAMPLE.COM
<prompt>Old password for jane:</prompt>
<prompt>New Password for jane:</prompt>
Verifying password
<prompt>New Password for jane:</prompt>
Password changed.</screen>
    </sect2>

    <sect2>
      <title>Adding <command>su</command> Privileges</title>

      <para>Kerberos allows us to give <emphasis>each</emphasis> user
	who needs <username>root</username> privileges their own
	<emphasis>separate</emphasis> &man.su.1; password.
	We could now add an ID which is authorized to
	&man.su.1; to <username>root</username>.  This is
	controlled by having an instance of <username>root</username>
	associated with a principal.  Using <command>kdb_edit</command>
	we can create the entry <literal>jane.root</literal> in the
	Kerberos database:</para>

      <screen>&prompt.root; <userinput>kdb_edit</userinput>
Opening database...

<prompt>Enter Kerberos master key:</prompt>

Current Kerberos master key version is 1.

Master key entered.  BEWARE!
Previous or default values are in [brackets] ,
enter return to leave the same, or new value.

<prompt>Principal name:</prompt> <userinput>jane</userinput>
<prompt>Instance:</prompt> <userinput>root</userinput>

&lt;Not found&gt;, Create [y] ? y

Principal: jane, Instance: root, kdc_key_ver: 1
<prompt>New Password:</prompt>                    &lt;---- enter a SECURE password here
Verifying password

<prompt>New Password:</prompt>    	 	 &lt;---- re-enter the password here

Principal's new key version = 1
<prompt>Expiration date (enter yyyy-mm-dd) [ 2000-01-01 ] ?</prompt>
<prompt>Max ticket lifetime (*5 minutes) [ 255 ] ?</prompt> <userinput>12</userinput> &lt;--- Keep this short!
<prompt>Attributes [ 0 ] ?</prompt>
Edit O.K.
<prompt>Principal name:</prompt>		         &lt;---- null entry here will cause an exit</screen>

      <para>Now try getting tokens for it to make sure it works:</para>

      <screen>&prompt.root; <userinput>kinit jane.root</userinput>
MIT Project Athena (grunt.example.com)
Kerberos Initialization for "jane.root"
<prompt>Password:</prompt></screen>

      <para>Now we need to add the user to <username>root</username>'s
	  <filename>.klogin</filename> file:</para>

      <screen>&prompt.root; <userinput>cat /root/.klogin</userinput>
jane.root@EXAMPLE.COM</screen>

      <para>Now try doing the &man.su.1;:</para>

      <screen>&prompt.user; <userinput>su</userinput>
<prompt>Password:</prompt></screen>

      <para>and take a look at what tokens we have:</para>

      <screen>&prompt.root; <userinput>klist</userinput>
Ticket file:	/tmp/tkt_root_245
Principal:      jane.root@EXAMPLE.COM

  Issued           Expires          Principal
May  2 20:43:12  May  3 04:43:12  krbtgt.EXAMPLE.COM@EXAMPLE.COM</screen>
    </sect2>

    <sect2>
      <title>Using Other Commands</title>

      <para>In an earlier example, we created a principal called
	<literal>jane</literal> with an instance <literal>root</literal>.
	This was based on a user with the same name as the principal, and this
	is a Kerberos default; that a
	<literal>&lt;principal&gt;.&lt;instance&gt;</literal> of the form
	<literal>&lt;username&gt;.</literal><username>root</username> will allow
	that <literal>&lt;username&gt;</literal> to &man.su.1; to
	<username>root</username> if the necessary entries are in the
	<filename>.klogin</filename> file in <username>root</username>'s
	home directory:</para>

      <screen>&prompt.root; <userinput>cat /root/.klogin</userinput>
jane.root@EXAMPLE.COM</screen>

      <para>Likewise, if a user has in their own home directory lines of the
	form:</para>

      <screen>&prompt.user; <userinput>cat ~/.klogin</userinput>
jane@EXAMPLE.COM
jack@EXAMPLE.COM</screen>

      <para>This allows anyone in the <literal>EXAMPLE.COM</literal> realm
	who has authenticated themselves as <username>jane</username> or
	<username>jack</username> (via <command>kinit</command>, see above)
	to access to <username>jane</username>'s
	account or files on this system (<hostid>grunt</hostid>) via
	&man.rlogin.1;, &man.rsh.1; or
	&man.rcp.1;.</para>

      <para>For example, <username>jane</username> now logs into another system using
	Kerberos:</para>

	    <screen>&prompt.user; <userinput>kinit</userinput>
MIT Project Athena (grunt.example.com)
<prompt>Password:</prompt>
&prompt.user; <userinput>rlogin grunt</userinput>
Last login: Mon May  1 21:14:47 from grumble
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.   All rights reserved.

FreeBSD BUILT-19950429 (GR386) #0: Sat Apr 29 17:50:09 SAT 1995</screen>

      <para>Or <username>jack</username> logs into <username>jane</username>'s account on the same machine
	(<username>jane</username> having
	set up the <filename>.klogin</filename> file as above, and the person
	in charge of Kerberos having set up principal
	<emphasis>jack</emphasis> with a null instance):</para>

      <screen>&prompt.user; <userinput>kinit</userinput>
&prompt.user; <userinput>rlogin grunt -l jane</userinput>
MIT Project Athena (grunt.example.com)
<prompt>Password:</prompt>
Last login: Mon May  1 21:16:55 from grumble
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.   All rights reserved.
FreeBSD BUILT-19950429 (GR386) #0: Sat Apr 29 17:50:09 SAT 1995</screen>
    </sect2>
  </sect1>

  <sect1 id="kerberos5">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tillman</firstname>
	  <surname>Hodgson</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
      <authorgroup>
	<author>
	  <firstname>Mark</firstname>
	  <surname>Murray</surname>
	  <contrib>Based on a contribution by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title><application>Kerberos5</application></title>

    <para>Every &os; release beyond &os;-5.1 includes support
      only for <application>Kerberos5</application>.  Hence
      <application>Kerberos5</application> is the only version
      included, and its configuration is similar in many aspects
      to that of <application>KerberosIV</application>.  The following
      information only applies to
      <application>Kerberos5</application> in post &os;-5.0
      releases.  Users who wish to use the
      <application>KerberosIV</application> package may install the
      <filename role="package">security/krb4</filename> port.</para>

    <para><application>Kerberos</application> is a network add-on
      system/protocol that allows users to authenticate themselves
      through the services of a secure server.  Services such as remote
      login, remote copy, secure inter-system file copying and other
      high-risk tasks are made considerably safer and more
      controllable.</para>

    <para><application>Kerberos</application> can be described as an
      identity-verifying proxy system.  It can also be described as a
      trusted third-party authentication system.
      <application>Kerberos</application> provides only one
      function &mdash; the secure authentication of users on the network.
      It does not provide authorization functions (what users are
      allowed to do) or auditing functions (what those users did).
      After a client and server have used
      <application>Kerberos</application> to prove their identity, they
      can also encrypt all of their communications to assure privacy
      and data integrity as they go about their business.</para>

    <para>Therefore it is highly recommended that
      <application>Kerberos</application> be used with other security
      methods which provide authorization and audit services.</para>

    <para>The following instructions can be used as a guide on how to set
      up <application>Kerberos</application> as distributed for &os;.
      However, you should refer to the relevant manual pages for a complete
      description.</para>

    <para>For purposes of demonstrating a <application>Kerberos</application>
      installation, the various name spaces will be handled as follows:</para>

    <itemizedlist>
      <listitem>
	<para>The <acronym>DNS</acronym> domain (<quote>zone</quote>)
	  will be example.org.</para>
      </listitem>

      <listitem>
	<para>The <application>Kerberos</application> realm will be
	  EXAMPLE.ORG.</para>
      </listitem>
    </itemizedlist>

    <note>
      <para>Please use real domain names when setting up
	<application>Kerberos</application> even if you intend to run
	it internally.  This avoids <acronym>DNS</acronym> problems
	and assures inter-operation with other
	<application>Kerberos</application> realms.</para>
    </note>

    <sect2>
      <title>History</title>
      <indexterm>
	<primary>Kerberos5</primary>
	<secondary>history</secondary>
      </indexterm>

      <para><application>Kerberos</application> was created by
	<acronym>MIT</acronym> as a solution to network security problems.
	The <application>Kerberos</application> protocol uses strong
	cryptography so that a client can prove its identity to a server
	(and vice versa) across an insecure network connection.</para>

      <para><application>Kerberos</application> is both the name of a
	network authentication protocol and an adjective to describe
	programs that implement the program
	(<application>Kerberos</application> telnet, for example).  The
	current version of the protocol is version 5, described in
	<acronym>RFC</acronym>&nbsp;1510.</para>

      <para>Several free implementations of this protocol are available,
	covering a wide range of operating systems.  The Massachusetts
	Institute of Technology (<acronym>MIT</acronym>), where
	<application>Kerberos</application> was originally developed,
	continues to develop their <application>Kerberos</application>
	package.  It is commonly used in the <acronym>US</acronym>
	as a cryptography product, as such it
	has historically been affected by <acronym>US</acronym> export
	regulations.  The <acronym>MIT</acronym>
	<application>Kerberos</application> is available as a port
	(<filename role="package">security/krb5</filename>).  Heimdal
	<application>Kerberos</application> is another version 5
	implementation, and was explicitly developed outside of the
	<acronym>US</acronym> to avoid export
	regulations (and is thus often included in non-commercial &unix;
	variants).  The Heimdal <application>Kerberos</application>
	distribution is available as a port
	(<filename role="package">security/heimdal</filename>), and a
	minimal installation of it is included in the base &os;
	install.</para>

    <para>In order to reach the widest audience, these instructions assume
	the use of the Heimdal distribution included in &os;.</para>

    </sect2>

    <sect2>
      <title>Setting up a Heimdal <acronym>KDC</acronym></title>
      <indexterm>
	<primary>Kerberos5</primary>
	<secondary>Key Distribution Center</secondary>
      </indexterm>

      <para>The Key Distribution Center (<acronym>KDC</acronym>) is the
	centralized authentication service that
	<application>Kerberos</application> provides &mdash; it is the
	computer that issues <application>Kerberos</application> tickets.
	The <acronym>KDC</acronym> is considered <quote>trusted</quote> by
	all other computers in the <application>Kerberos</application>
	realm, and thus has heightened security concerns.</para>

    <para>Note that while running the <application>Kerberos</application>
	server requires very few computing resources, a dedicated machine
	acting only as a <acronym>KDC</acronym> is recommended for security
	reasons.</para>

    <para>To begin setting up a <acronym>KDC</acronym>, ensure that your
	<filename>/etc/rc.conf</filename> file contains the correct
	settings to act as a <acronym>KDC</acronym> (you may need to adjust
	paths to reflect your own system):</para>

    <programlisting>kerberos5_server_enable="YES"
kadmind5_server_enable="YES"</programlisting>

      <para>Next we will set up your <application>Kerberos</application>
	config file, <filename>/etc/krb5.conf</filename>:</para>

      <programlisting>[libdefaults]
    default_realm = EXAMPLE.ORG
[realms]
    EXAMPLE.ORG = {
        kdc = kerberos.example.org
        admin_server = kerberos.example.org
    }
[domain_realm]
    .example.org = EXAMPLE.ORG</programlisting>

      <para>Note that this <filename>/etc/krb5.conf</filename> file implies
	that your <acronym>KDC</acronym> will have the fully-qualified
	hostname of <hostid role="fqdn">kerberos.example.org</hostid>.
	You will need to add a CNAME (alias) entry to your zone file to
	accomplish this if your <acronym>KDC</acronym> has a different
	hostname.</para>

      <note>
	<para>For large networks with a properly configured
	  <acronym>BIND</acronym> <acronym>DNS</acronym> server, the
	  above example could be trimmed to:</para>

	<programlisting>[libdefaults]
      default_realm = EXAMPLE.ORG</programlisting>

	<para>With the following lines being appended to the
	  <hostid role="fqdn">example.org</hostid> zonefile:</para>

	<programlisting>_kerberos._udp      IN  SRV     01 00 88 kerberos.example.org.
_kerberos._tcp      IN  SRV     01 00 88 kerberos.example.org.
_kpasswd._udp       IN  SRV     01 00 464 kerberos.example.org.
_kerberos-adm._tcp  IN  SRV     01 00 749 kerberos.example.org.
_kerberos           IN  TXT     EXAMPLE.ORG</programlisting></note>

      <note>
        <para>For clients to be able to find the
          <application>Kerberos</application> services, you
          <emphasis>must</emphasis> have either a fully configured
          <filename>/etc/krb5.conf</filename> or a minimally configured
          <filename>/etc/krb5.conf</filename> <emphasis>and</emphasis> a
          properly configured DNS server.</para>
      </note>

      <para>Next we will create the <application>Kerberos</application>
	database.  This database contains the keys of all principals encrypted
	with a master password.  You are not
	required to remember this password, it will be stored in a file
	(<filename>/var/heimdal/m-key</filename>).  To create the master
	key, run <command>kstash</command> and enter a password.</para>

      <para>Once the master key has been created, you can initialize the
	database using the <command>kadmin</command> program with the
	<literal>-l</literal> option (standing for <quote>local</quote>).
	This option instructs <command>kadmin</command> to modify the
	database files directly rather than going through the
	<command>kadmind</command> network service.  This handles the
	chicken-and-egg problem of trying to connect to the database
	before it is created.  Once you have the <command>kadmin</command>
	prompt, use the <command>init</command> command to create your
	realms initial database.</para>

      <para>Lastly, while still in <command>kadmin</command>, create your
	first principal using the <command>add</command> command.  Stick
	to the defaults options for the principal for now, you can always
	change them later with the <command>modify</command> command.
	Note that you can use the <literal>?</literal> command at any
	prompt to see the available options.</para>

      <para>A sample database creation session is shown below:</para>

      <screen>&prompt.root; <userinput>kstash</userinput>
Master key: <userinput>xxxxxxxx</userinput>
Verifying password - Master key: <userinput>xxxxxxxx</userinput>

&prompt.root; <userinput>kadmin -l</userinput>
kadmin> <userinput>init EXAMPLE.ORG</userinput>
Realm max ticket life [unlimited]:
kadmin> <userinput>add tillman</userinput>
Max ticket life [unlimited]:
Max renewable life [unlimited]:
Attributes []:
Password: <userinput>xxxxxxxx</userinput>
Verifying password - Password: <userinput>xxxxxxxx</userinput></screen>

      <para>Now it is time to start up the <acronym>KDC</acronym> services.
	Run <command>/etc/rc.d/kerberos start</command> and
	<command>/etc/rc.d/kadmind start</command> to bring up the
	services.  Note that you will not have any kerberized daemons running
	at this point but you should be able to confirm the that the
	<acronym>KDC</acronym> is functioning by obtaining and listing a
	ticket for the principal (user) that you just created from the
	command-line of the <acronym>KDC</acronym> itself:</para>

      <screen>&prompt.user; <userinput>kinit <replaceable>tillman</replaceable></userinput>
tillman@EXAMPLE.ORG's Password:

&prompt.user; <userinput>klist</userinput>
Credentials cache: FILE:<filename>/tmp/krb5cc_500</filename>
	Principal: tillman@EXAMPLE.ORG

  Issued           Expires          Principal
Aug 27 15:37:58  Aug 28 01:37:58  krbtgt/EXAMPLE.ORG@EXAMPLE.ORG</screen>

	<para>The ticket can then be revoked when you have
	  finished:</para>

	<screen>&prompt.user; <userinput>k5destroy</userinput></screen>
      </sect2>

      <sect2>
	<title><application>Kerberos</application> enabling a server with
	  Heimdal services</title>

        <indexterm>
	  <primary>Kerberos5</primary>
	  <secondary>enabling services</secondary>
        </indexterm>

	<para>First, we need a copy of the <application>Kerberos</application>
	  configuration file, <filename>/etc/krb5.conf</filename>.  To do
	  so, simply copy it over to the client computer from the
	  <acronym>KDC</acronym> in a secure fashion (using network utilities,
	  such as &man.scp.1;, or physically via a
	  floppy disk).</para>

	<para>Next you need a <filename>/etc/krb5.keytab</filename> file.
	  This is the major difference between a server providing
	  <application>Kerberos</application> enabled daemons and a
	  workstation &mdash; the server must have a
	  <filename>keytab</filename> file.  This file
	  contains the server's host key, which allows it and the
	  <acronym>KDC</acronym> to verify each others identity.  It
	  must be transmitted to the server in a secure fashion, as the
	  security of the server can be broken if the key is made public.
	  This explicitly means that transferring it via a clear text
	  channel, such as <acronym>FTP</acronym>, is a very bad idea.</para>

	<para>Typically, you transfer to the <filename>keytab</filename>
	  to the server using the <command>kadmin</command> program.
	  This is handy because you also need to create the host principal
	  (the <acronym>KDC</acronym> end of the
	  <filename>krb5.keytab</filename>) using
	  <command>kadmin</command>.</para>

	<para>Note that you must have already obtained a ticket and that this
	  ticket must be allowed to use the <command>kadmin</command>
	  interface in the <filename>kadmind.acl</filename>.  See the section
	  titled <quote>Remote administration</quote> in the Heimdal info
	  pages (<command>info heimdal</command>) for details on designing
	  access control lists.  If you do not want to enable remote
	  <command>kadmin</command> access, you can simply securely connect
	  to the <acronym>KDC</acronym> (via local console,
	  &man.ssh.1; or <application>Kerberos</application>
	  &man.telnet.1;) and perform administration locally
	  using <command>kadmin -l</command>.</para>

	<para>After installing the <filename>/etc/krb5.conf</filename> file,
	  you can use <command>kadmin</command> from the
	  <application>Kerberos</application> server.  The
	  <command>add --random-key</command> command will let you add the
	  server's host principal, and the <command>ext</command> command
	  will allow you to extract the server's host principal to its own
	  keytab.  For example:</para>

	<screen>&prompt.root; <userinput>kadmin</userinput>
kadmin><userinput> add --random-key host/myserver.example.org</userinput>
Max ticket life [unlimited]:
Max renewable life [unlimited]:
Attributes []:
kadmin><userinput> ext host/myserver.example.org</userinput>
kadmin><userinput> exit</userinput></screen>

	<para>Note that the <command>ext</command> command (short for
	  <quote>extract</quote>) stores the extracted key in
	  <filename>/etc/krb5.keytab</filename> by default.</para>

	<para>If you do not have <command>kadmind</command> running on the
	  <acronym>KDC</acronym> (possibly for security reasons) and thus
	  do not have access to <command>kadmin</command> remotely, you
	  can add the host principal
	  (<username>host/myserver.EXAMPLE.ORG</username>) directly on the
	  <acronym>KDC</acronym> and then extract it to a temporary file
	  (to avoid over-writing the <filename>/etc/krb5.keytab</filename>
	  on the <acronym>KDC</acronym>) using something like this:</para>

	<screen>&prompt.root; <userinput>kadmin</userinput>
kadmin><userinput> ext --keytab=/tmp/example.keytab host/myserver.example.org</userinput>
kadmin><userinput> exit</userinput></screen>

	<para>You can then securely copy the keytab to the server
	  computer (using <command>scp</command> or a floppy, for
	  example).  Be sure to specify a non-default keytab name
	  to avoid over-writing the keytab on the
	  <acronym>KDC</acronym>.</para>

	<para>At this point your server can communicate with the
	  <acronym>KDC</acronym> (due to its <filename>krb5.conf</filename>
	  file) and it can prove its own identity (due to the
	  <filename>krb5.keytab</filename> file).  It is now ready for
	  you to enable some <application>Kerberos</application> services.
	  For this example we will enable the <command>telnet</command>
	  service by putting a line like this into your
	  <filename>/etc/inetd.conf</filename> and then restarting the
	  &man.inetd.8; service with
	  <command>/etc/rc.d/inetd restart</command>:</para>

	<programlisting>telnet    stream  tcp     nowait  root    /usr/libexec/telnetd  telnetd -a user</programlisting>

	<para>The critical bit is that the <command>-a</command>
	  (for authentication) type is set to user.  Consult the
	  &man.telnetd.8; manual page for more details.</para>

      </sect2>

      <sect2>
	<title><application>Kerberos</application> enabling a client with Heimdal</title>

	<indexterm>
	  <primary>Kerberos5</primary>
	  <secondary>configure clients</secondary>
	</indexterm>

	<para>Setting up a client computer is almost trivially easy.  As
	  far as <application>Kerberos</application> configuration goes,
	  you only need the <application>Kerberos</application>
	  configuration file, located at <filename>/etc/krb5.conf</filename>.
	  Simply securely copy it over to the client computer from the
	  <acronym>KDC</acronym>.</para>

	<para>Test your client computer by attempting to use
	  <command>kinit</command>, <command>klist</command>, and
	  <command>kdestroy</command> from the client to obtain, show, and
	  then delete a ticket for the principal you created above.  You
	  should also be able to use <application>Kerberos</application>
	  applications to connect to <application>Kerberos</application>
	  enabled servers, though if that does not work and obtaining a
	  ticket does the problem is likely with the server and not with
	  the client or the <acronym>KDC</acronym>.</para>

	<para>When testing an application like <command>telnet</command>,
	  try using a packet sniffer (such as &man.tcpdump.1;)
	  to confirm that your password is not sent in the clear.  Try
	  using <command>telnet</command> with the <literal>-x</literal>
	  option, which encrypts the entire data stream (similar to
	  <command>ssh</command>).</para>

	<para>Various non-core <application>Kerberos</application> client
	  applications are also installed by default.  This is where the
	  <quote>minimal</quote> nature of the base Heimdal installation is
	  felt: <command>telnet</command> is the only
	  <application>Kerberos</application> enabled service.</para>

	<para>The Heimdal port adds some of the missing client applications:
	  <application>Kerberos</application> enabled versions of
	  <command>ftp</command>, <command>rsh</command>,
	  <command>rcp</command>, <command>rlogin</command>, and a few
	  other less common programs. The <acronym>MIT</acronym> port also
	  contains a full suite of <application>Kerberos</application>
	  client applications.</para>

      </sect2>

      <sect2>
	<title>User configuration files: <filename>.k5login</filename> and <filename>.k5users</filename></title>

	<indexterm>
	  <primary><filename>.k5login</filename></primary>
	</indexterm>

	<indexterm>
	  <primary><filename>.k5users</filename></primary>
	</indexterm>

	<para>Users within a realm typically have their
	  <application>Kerberos</application> principal (such as
	  <username>tillman@EXAMPLE.ORG</username>) mapped to a local
	  user account (such as a local account named
	  <username>tillman</username>).  Client applications such as
	  <command>telnet</command> usually do not require a user name
	  or a principal.</para>

	<para>Occasionally, however, you want to grant access to a local
	  user account to someone who does not have a matching
	  <application>Kerberos</application> principal.  For example,
	  <username>tillman@EXAMPLE.ORG</username> may need access to the
	  local user account <username>webdevelopers</username>.  Other
	  principals may also need access to that local account.</para>

	<para>The <filename>.k5login</filename> and
	  <filename>.k5users</filename> files, placed in a users home
	  directory, can be used similar to a powerful combination of
	  <filename>.hosts</filename> and <filename>.rhosts</filename>,
	  solving this problem. For example, if a
	  <filename>.k5login</filename> with the following
	  contents:</para>

	<screen>tillman@example.org
jdoe@example.org</screen>

	<para>Were to be placed into the home directory of the local user
	  <username>webdevelopers</username> then both principals listed
	  would have access to that account without requiring a shared
	  password.</para>

	<para>Reading the manual pages for these commands is recommended.
	  Note that the <command>ksu</command> manual page covers
	  <filename>.k5users</filename>.</para>

      </sect2>

      <sect2>
	<title><application>Kerberos</application> Tips, Tricks, and Troubleshooting</title>

	<indexterm>
	  <primary>Kerberos5</primary>
	  <secondary>troubleshooting</secondary>
	</indexterm>

	<itemizedlist>
	  <listitem>
	    <para>When using either the Heimdal or <acronym>MIT</acronym>
	      <application>Kerberos</application> ports ensure that your
	      <envar>PATH</envar> environment variable lists the
	      <application>Kerberos</application> versions of the client
	      applications before the system versions.</para>
	  </listitem>

	  <listitem>
	    <para>Do all the computers in your realm have synchronized
	      time settings?  If not, authentication may fail.
	      <xref linkend="network-ntp"/> describes how to synchronize
	      clocks using <acronym>NTP</acronym>.</para>
	  </listitem>

	  <listitem>
	    <para><acronym>MIT</acronym> and Heimdal inter-operate nicely.
	      Except for <command>kadmin</command>, the protocol for
	      which is not standardized.</para>
	  </listitem>

	  <listitem>
	    <para>If you change your hostname, you also need to change your
	      <username>host/</username> principal and update your keytab.
	      This also applies to special keytab entries like the
	      <username>www/</username> principal used for Apache's
	      <filename role="package">www/mod_auth_kerb</filename>.</para>
	  </listitem>

	  <listitem>
	    <para>All hosts in your realm must be resolvable (both forwards
	      and reverse) in <acronym>DNS</acronym> (or
	      <filename>/etc/hosts</filename> as a minimum).  CNAMEs
	      will work, but the A and PTR records must be correct and in
	      place. The error message is not very intuitive:
	      <errorname>Kerberos5 refuses authentication because Read req
	      failed: Key table entry not found</errorname>.</para>
	  </listitem>

	  <listitem>
	    <para>Some operating systems that may being acting as clients
	      to your <acronym>KDC</acronym> do not set the permissions
	      for <command>ksu</command> to be setuid
	      <username>root</username>.  This means that
	      <command>ksu</command> does not work, which is a good
	      security idea but annoying. This is not a
	      <acronym>KDC</acronym> error.</para>
	  </listitem>

	  <listitem>
	    <para>With <acronym>MIT</acronym>
	      <application>Kerberos</application>, if you want to allow a
	      principal to have a ticket life longer than the default ten
	      hours, you must use <command>modify_principal</command> in
	      <command>kadmin</command> to change the maxlife of both the
	      principal in question and the <username>krbtgt</username>
	      principal.  Then the principal can use the
	      <literal>-l</literal> option with <command>kinit</command>
	      to request a ticket with a longer lifetime.</para>
	  </listitem>

	  <listitem>
	    <note><para>If you run a packet sniffer on your
	      <acronym>KDC</acronym> to add in troubleshooting and then
	      run <command>kinit</command> from a workstation, you will
	      notice that your <acronym>TGT</acronym> is sent
	      immediately upon running <command>kinit</command> &mdash;
	      even before you type your password!  The explanation is
	      that the <application>Kerberos</application> server freely
	      transmits a <acronym>TGT</acronym> (Ticket Granting
	      Ticket) to any unauthorized request;  however, every
	      <acronym>TGT</acronym> is encrypted in a key derived from
	      the user's password.  Therefore, when a user types their
	      password it is not being sent to the <acronym>KDC</acronym>,
	      it is being used to decrypt the <acronym>TGT</acronym> that
	      <command>kinit</command> already obtained. If the decryption
	      process results in a valid ticket with a valid time stamp,
	      the user has valid <application>Kerberos</application>
	      credentials.  These credentials include a session key for
	      establishing secure communications with the
	      <application>Kerberos</application> server in the future, as
	      well as the actual ticket-granting ticket, which is actually
	      encrypted with the <application>Kerberos</application>
	      server's own key.  This second layer of encryption is
	      unknown to the user, but it is what allows the
	      <application>Kerberos</application> server to verify
	      the authenticity of each <acronym>TGT</acronym>.</para></note>
	  </listitem>

	  <listitem>
	    <para>If you want to use long ticket lifetimes (a week, for
	      example) and you are using <application>OpenSSH</application>
	      to connect to the machine where your ticket is stored, make
	      sure that <application>Kerberos</application>
	      <option>TicketCleanup</option> is set to <literal>no</literal>
	      in your <filename>sshd_config</filename> or else your tickets
	      will be deleted when you log out.</para>
	  </listitem>

	  <listitem>
	    <para>Remember that host principals can have a longer ticket
	      lifetime as well.  If your user principal has a lifetime of a
	      week but the host you are connecting to has a lifetime of nine
	      hours, you will have an expired host principal in your cache
	      and the ticket cache will not work as expected.</para>
	  </listitem>

	  <listitem>
	    <para>When setting up a <filename>krb5.dict</filename> file to
	    prevent specific bad passwords from being used (the manual page
	    for <command>kadmind</command> covers this briefly), remember
	    that it only applies to principals that have a password policy
	    assigned to them.  The <filename>krb5.dict</filename> files
	    format is simple: one string per line.  Creating a symbolic
	    link to <filename>/usr/share/dict/words</filename> might be
	    useful.</para>
	  </listitem>
        </itemizedlist>

      </sect2>

      <sect2>
	<title>Differences with the <acronym>MIT</acronym> port</title>

	<para>The major difference between the <acronym>MIT</acronym>
	  and Heimdal installs relates to the <command>kadmin</command>
	  program which has a different (but equivalent) set of commands
	  and uses a different protocol.  This has a large implications
	  if your <acronym>KDC</acronym> is <acronym>MIT</acronym> as you
	  will not be able to use the Heimdal <command>kadmin</command>
	  program to administer your <acronym>KDC</acronym> remotely
	  (or vice versa, for that matter).</para>

	<para>The client applications may also take slightly different
	  command line options to accomplish the same tasks.  Following
	  the instructions on the <acronym>MIT</acronym>
	  <application>Kerberos</application> web site
	  (<ulink url="http://web.mit.edu/Kerberos/www/"></ulink>)
	  is recommended. Be careful of path issues: the
	  <acronym>MIT</acronym> port installs into
	  <filename>/usr/local/</filename> by default, and the
	  <quote>normal</quote> system applications may be run instead
	  of <acronym>MIT</acronym> if your <envar>PATH</envar>
	  environment variable lists the system directories first.</para>

	<note><para>With the <acronym>MIT</acronym>
	  <filename role="package">security/krb5</filename> port
	  that is provided by &os;, be sure to read the
	  <filename>/usr/local/share/doc/krb5/README.FreeBSD</filename>
	  file installed by the port if you want to understand why logins
	  via <command>telnetd</command> and <command>klogind</command>
	  behave somewhat oddly.  Most importantly, correcting the
	  <quote>incorrect permissions on cache file</quote> behavior
	  requires that the <command>login.krb5</command> binary be used
	  for authentication so that it can properly change ownership for
	  the forwarded credentials.</para></note>

	<para>The <filename>rc.conf</filename> must also be modified
	  to contain the following configuration:</para>

	<programlisting>kerberos5_server="/usr/local/sbin/krb5kdc"
kadmind5_server="/usr/local/sbin/kadmind"
kerberos5_server_enable="YES"
kadmind5_server_enable="YES"</programlisting>

	<para>This is done because the applications for
	  <acronym>MIT</acronym> kerberos installs binaries in the
	  <filename class="directory">/usr/local</filename>
	  hierarchy.</para>
      </sect2>

      <sect2>
	<title>Mitigating limitations found in <application>Kerberos</application></title>

	<indexterm>
	  <primary>Kerberos5</primary>
	  <secondary>limitations and shortcomings</secondary>
	</indexterm>

	<sect3>
	 <title><application>Kerberos</application> is an all-or-nothing approach</title>

	  <para>Every service enabled on the network must be modified to
	    work with <application>Kerberos</application> (or be otherwise
	    secured against network attacks) or else the users credentials
	    could be stolen and re-used.  An example of this would be
	    <application>Kerberos</application> enabling all remote shells
	    (via <command>rsh</command> and <command>telnet</command>, for
	    example) but not converting the <acronym>POP3</acronym> mail
	    server which sends passwords in plain text.</para>

	</sect3>

	<sect3>
	  <title><application>Kerberos</application> is intended for single-user workstations</title>

	  <para>In a multi-user environment,
	    <application>Kerberos</application> is less secure.
	    This is because it stores the tickets in the
	    <filename>/tmp</filename> directory, which is readable by all
	    users.  If a user is sharing a computer with several other
	    people simultaneously (i.e. multi-user), it is possible that
	    the user's tickets can be stolen (copied) by another
	    user.</para>

	  <para>This can be overcome with the <literal>-c</literal>
	    filename command-line option or (preferably) the
	    <envar>KRB5CCNAME</envar> environment variable, but this
	    is rarely done. In principal, storing the ticket in the users
	    home directory and using simple file permissions can mitigate
	    this problem.</para>

	</sect3>

	<sect3>
	  <title>The KDC is a single point of failure</title>

	  <para>By design, the <acronym>KDC</acronym> must be as secure as
	    the master password database is contained on it.  The
	    <acronym>KDC</acronym> should have absolutely no other
	    services running on it and should be physically secured.  The
	    danger is high because <application>Kerberos</application>
	    stores all passwords encrypted with the same key (the
	    <quote>master</quote> key), which in turn is stored as a file
	    on the <acronym>KDC</acronym>.</para>

	  <para>As a side note, a compromised master key is not quite as
	    bad as one might normally fear.  The master key is only used
	    to encrypt the <application>Kerberos</application> database
	    and as a seed for the random number generator.  As long as
	    access to your <acronym>KDC</acronym> is secure, an attacker
	    cannot do much with the master key.</para>

	  <para>Additionally, if the <acronym>KDC</acronym> is unavailable
	    (perhaps due to a denial of service attack or network problems)
	    the network services are unusable as authentication can not be
	    performed, a recipe for a denial-of-service attack.  This can
	    alleviated with multiple <acronym>KDC</acronym>s (a single
	    master and one or more slaves) and with careful implementation
	    of secondary or fall-back authentication
	    (<acronym>PAM</acronym> is excellent for this).</para>

	</sect3>

	<sect3>
	  <title><application>Kerberos</application> Shortcomings</title>

	  <para><application>Kerberos</application> allows users, hosts
	    and services to authenticate between themselves.  It does not
	    have a mechanism to authenticate the <acronym>KDC</acronym>
	    to the users, hosts or services.  This means that a trojanned
	    <command>kinit</command> (for example) could record all user
	    names and passwords.  Something like
	    <filename role="package">security/tripwire</filename> or
	    other file system integrity checking tools can alleviate
	    this.</para>

	</sect3>
      </sect2>

      <sect2>
	<title>Resources and further information</title>

	<indexterm>
	  <primary>Kerberos5</primary>
	  <secondary>external resources</secondary>
	</indexterm>

	<itemizedlist>
	  <listitem>
	  <para><ulink
	    url="http://www.faqs.org/faqs/Kerberos-faq/general/preamble.html">
	    The <application>Kerberos</application> FAQ</ulink></para>
	</listitem>

	<listitem>
	  <para><ulink url="http://web.mit.edu/Kerberos/www/dialogue.html">Designing
	    an Authentication System: a Dialog in Four Scenes</ulink></para>
	</listitem>

	<listitem>
	  <para><ulink url="http://www.ietf.org/rfc/rfc1510.txt?number=1510">RFC 1510,
	    The <application>Kerberos</application> Network Authentication Service
	    (V5)</ulink></para>
	</listitem>

	<listitem>
	  <para><ulink url="http://web.mit.edu/Kerberos/www/"><acronym>MIT</acronym>
	    <application>Kerberos</application> home page</ulink></para>
	</listitem>

	<listitem>
	<para><ulink url="http://www.pdc.kth.se/heimdal/">Heimdal
	  <application>Kerberos</application> home page</ulink></para>
	</listitem>

	</itemizedlist>
    </sect2>
  </sect1>

  <sect1 id="openssl">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Written by: </contrib>
	</author>
      </authorgroup>
    </sect1info>
    <title>OpenSSL</title>
    <indexterm>
      <primary>security</primary>
      <secondary>OpenSSL</secondary>
    </indexterm>

    <para>One feature that many users overlook is the
      <application>OpenSSL</application> toolkit included
      in &os;.  <application>OpenSSL</application> provides an
      encryption transport layer on top of the normal communications
      layer; thus allowing it to be intertwined with many network
      applications and services.</para>

    <para>Some uses of <application>OpenSSL</application> may include
      encrypted authentication of mail clients, web based transactions
      such as credit card payments and more.  Many ports such as
      <filename role="package">www/apache13-ssl</filename>, and
      <filename role="package">mail/sylpheed-claws</filename>
      will offer compilation support for building with
      <application>OpenSSL</application>.</para>

    <note>
      <para>In most cases the Ports Collection will attempt to build
	the <filename role="package">security/openssl</filename> port
	unless the <makevar>WITH_OPENSSL_BASE</makevar> make variable
	is explicitly set to <quote>yes</quote>.</para>
    </note>

    <para>The version of <application>OpenSSL</application> included
      in &os; supports Secure Sockets Layer v2/v3 (SSLv2/SSLv3),
      Transport Layer Security v1 (TLSv1) network security protocols
      and can be used as a general cryptographic library.</para>

    <note>
      <para>While <application>OpenSSL</application> supports the
	<acronym>IDEA</acronym> algorithm, it is disabled by default
	due to United States patents.  To use it, the license should
	be reviewed and, if the restrictions are acceptable, the
	<makevar>MAKE_IDEA</makevar> variable must be set in
	<filename>make.conf</filename>.</para>
    </note>

    <para>One of the most common uses of
      <application>OpenSSL</application> is to provide certificates for
      use with software applications.  These certificates ensure
      that the credentials of the company or individual are valid
      and not fraudulent.  If the certificate in question has
      not been verified by one of the several <quote>Certificate Authorities</quote>,
      or <acronym>CA</acronym>s, a warning is usually produced.  A
      Certificate Authority is a company, such as <ulink url="http://www.verisign.com">VeriSign</ulink>, which will
      sign certificates in order to validate credentials of individuals
      or companies.  This process has a cost associated with it and
      is definitely not a requirement for using certificates; however,
      it can put some of the more paranoid users at ease.</para>

    <sect2>
      <title>Generating Certificates</title>

      <indexterm>
	<primary>OpenSSL</primary>
	<secondary>certificate generation</secondary>
      </indexterm>

      <para>To generate a certificate, the following command is
	available:</para>

      <screen>&prompt.root; <userinput>openssl req -new -nodes -out req.pem -keyout cert.pem</userinput>
Generating a 1024 bit RSA private key
................++++++
.......................................++++++
writing new private key to 'cert.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:<userinput><replaceable>US</replaceable></userinput>
State or Province Name (full name) [Some-State]:<userinput><replaceable>PA</replaceable></userinput>
Locality Name (eg, city) []:<userinput><replaceable>Pittsburgh</replaceable></userinput>
Organization Name (eg, company) [Internet Widgits Pty Ltd]:<userinput><replaceable>My Company</replaceable></userinput>
Organizational Unit Name (eg, section) []:<userinput><replaceable>Systems Administrator</replaceable></userinput>
Common Name (eg, YOUR name) []:<userinput><replaceable>localhost.example.org</replaceable></userinput>
Email Address []:<userinput><replaceable>trhodes@FreeBSD.org</replaceable></userinput>

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:<userinput><replaceable>SOME PASSWORD</replaceable></userinput>
An optional company name []:<userinput><replaceable>Another Name</replaceable></userinput></screen>

      <para>Notice the response directly after the
	<quote>Common Name</quote> prompt shows a domain name.
	This prompt requires a server name to be entered for
	verification purposes; placing anything	but a domain name
	would yield a useless certificate.  Other options, for
	instance expire time, alternate encryption algorithms, etc.
	are available.  A complete list may be obtained by viewing
	the &man.openssl.1; manual page.</para>

      <para>Two files should now exist in
	the directory in which the aforementioned command was issued.
	The certificate request, <filename>req.pem</filename>, may be
	sent to a certificate authority who will validate the credentials
	that you entered, sign the request and return the certificate to
	you.  The second file created will be named <filename>cert.pem</filename>
	and is the private key for the certificate and should be
	protected at all costs; if this falls in the hands of others it
	can be used to impersonate you (or your server).</para>

      <para>In cases where a signature from a <acronym>CA</acronym> is
	not required, a self signed certificate can be created.  First,
	generate the <acronym>RSA</acronym> key:</para>

      <screen>&prompt.root; <userinput>openssl dsaparam -rand -genkey -out <filename>myRSA.key</filename> 1024</userinput></screen>

	<para>Next, generate the <acronym>CA</acronym> key:</para>

      <screen>&prompt.root; <userinput>openssl gendsa -des3 -out <filename>myca.key</filename> <filename>myRSA.key</filename></userinput></screen>

      <para>Use this key to create the certificate:</para>

      <screen>&prompt.root; <userinput>openssl req -new -x509 -days 365 -key <filename>myca.key</filename> -out <filename>new.crt</filename></userinput></screen>

      <para>Two new files should appear in the directory: a certificate
	authority signature file, <filename>myca.key</filename> and the
	certificate itself, <filename>new.crt</filename>.  These should
	be placed in a directory, preferably under
	<filename class="directory">/etc</filename>, which is readable
	only by <username>root</username>.  Permissions of 0700 should be fine for this and
	they can be set with the <command>chmod</command>
	utility.</para>
    </sect2>

    <sect2>
      <title>Using Certificates, an Example</title>

      <para>So what can these files do?  A good use would be to
	encrypt connections to the <application>Sendmail</application>
	<acronym>MTA</acronym>.  This would dissolve the use of clear
	text authentication for users who send mail via the local
	<acronym>MTA</acronym>.</para>

      <note>
	<para>This is not the best use in the world as some
	  <acronym>MUA</acronym>s will present the user with an
	  error if they have not installed the certificate locally.
	  Refer to the documentation included with the software for
	  more information on certificate installation.</para>
      </note>

      <para>The following lines should be placed inside the
	local <filename>.mc</filename> file:</para>

      <programlisting>dnl SSL Options
define(`confCACERT_PATH',`/etc/certs')dnl
define(`confCACERT',`/etc/certs/new.crt')dnl
define(`confSERVER_CERT',`/etc/certs/new.crt')dnl
define(`confSERVER_KEY',`/etc/certs/myca.key')dnl
define(`confTLS_SRV_OPTIONS', `V')dnl</programlisting>

      <para>Where <filename class="directory">/etc/certs/</filename>
	is the directory to be used for storing the certificate
	and key files locally.  The last few requirements are a rebuild
	of the local <filename>.cf</filename> file.  This is easily
	achieved by typing <command>make</command>
	<parameter>install</parameter> within the
	<filename class="directory">/etc/mail</filename>
	directory.  Follow that up with <command>make</command>
	<parameter>restart</parameter> which should start the
	<application>Sendmail</application> daemon.</para>

      <para>If all went well there will be no error messages in the
	<filename>/var/log/maillog</filename> file and
	<application>Sendmail</application> will show up in the process
	list.</para>

      <para>For a simple test, simply connect to the mail server
	using the &man.telnet.1; utility:</para>

      <screen>&prompt.root; <userinput>telnet <replaceable>example.com</replaceable> 25</userinput>
Trying 192.0.34.166...
Connected to <hostid role="fqdn">example.com</hostid>.
Escape character is '^]'.
220 <hostid role="fqdn">example.com</hostid> ESMTP Sendmail 8.12.10/8.12.10; Tue, 31 Aug 2004 03:41:22 -0400 (EDT)
<userinput>ehlo <replaceable>example.com</replaceable></userinput>
250-example.com Hello example.com [192.0.34.166], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE
250-DSN
250-ETRN
250-AUTH LOGIN PLAIN
250-STARTTLS
250-DELIVERBY
250 HELP
<userinput>quit</userinput>
221 2.0.0 <hostid role="fqdn">example.com</hostid> closing connection
Connection closed by foreign host.</screen>

      <para>If the <quote>STARTTLS</quote> line appears in the output
	then everything is working correctly.</para>
    </sect2>
  </sect1>

  <sect1 id="ipsec">
    <sect1info>
      <authorgroup>
        <author>
  	  <firstname>Nik</firstname>
	  <surname>Clayton</surname>
	  <affiliation>
	    <address><email>nik@FreeBSD.org</email></address>
          </affiliation>
          <contrib>Written by </contrib>
        </author>
      </authorgroup>
    </sect1info>

    <title>VPN over IPsec</title>

    <indexterm>
      <primary>IPsec</primary>
    </indexterm>

    <para>Creating a VPN between two networks, separated by the
      Internet, using FreeBSD gateways.</para>

    <sect2>
      <sect2info>
        <authorgroup>
          <author>
            <firstname>Hiten M.</firstname>
            <surname>Pandya</surname>
	    <affiliation>
	      <address><email>hmp@FreeBSD.org</email></address>
	    </affiliation>
	    <contrib>Written by </contrib>
	  </author>
	</authorgroup>
      </sect2info>

      <title>Understanding IPsec</title>

      <para>This section will guide you through the process of setting
	up IPsec, and to use it in an environment which consists of
	FreeBSD and <application>&microsoft.windows; 2000/XP</application>
	machines, to make them communicate securely.  In order to set up
	IPsec, it is necessary that you are familiar with the concepts
	of building a custom kernel (see
	<xref linkend="kernelconfig"/>).</para>

      <para><emphasis>IPsec</emphasis> is a protocol which sits on top
	of the Internet Protocol (IP) layer.  It allows two or more
	hosts to communicate in a secure manner (hence the name).  The
	FreeBSD IPsec <quote>network stack</quote> is based on the
	<ulink url="http://www.kame.net/">KAME</ulink> implementation,
	which has support for both protocol families, IPv4 and
	IPv6.</para>

      <note>
        <para>FreeBSD contains a <quote>hardware
        accelerated</quote> IPsec stack, known as <quote>Fast
        IPsec</quote>, that was obtained from OpenBSD.  It employs
        cryptographic hardware (whenever possible) via the
        &man.crypto.4; subsystem to optimize the performance of IPsec.
        This subsystem is new, and does not support all the features
        that are available in the KAME version of IPsec.  However, in
        order to enable hardware-accelerated IPsec, the following
        kernel option has to be added to your kernel configuration
        file:</para>

	<indexterm>
	  <primary>kernel options</primary>
	  <secondary>FAST_IPSEC</secondary>
	</indexterm>

        <screen>
options	  FAST_IPSEC  # new IPsec (cannot define w/ IPSEC)
        </screen>

        <para> Note, that it is not currently possible to use the
	  <quote>Fast IPsec</quote> subsystem in lieu of the KAME
	  implementation of IPsec.  Consult the &man.fast.ipsec.4;
	  manual page for more information.</para>
      </note>

      <note>
	<para>To let firewalls properly track state for &man.gif.4;
	  tunnels too, you have to enable the
	  <option>IPSEC_FILTERGIF</option> in your kernel
	  configuration:</para>

	<screen>
options   IPSEC_FILTERGIF  #filter ipsec packets from a tunnel
	</screen>
      </note>

      <indexterm>
	<primary>IPsec</primary>
	<secondary>ESP</secondary>
      </indexterm>

      <indexterm>
	<primary>IPsec</primary>
	<secondary>AH</secondary>
      </indexterm>

      <para>IPsec consists of two sub-protocols:</para>

      <itemizedlist>
        <listitem>
          <para><emphasis>Encapsulated Security Payload
	      (ESP)</emphasis>, protects the IP packet data from third
	    party interference, by encrypting the contents using
	    symmetric cryptography algorithms (like Blowfish,
	    3DES).</para>
        </listitem>
        <listitem>
          <para><emphasis>Authentication Header (AH)</emphasis>,
	    protects the IP packet header from third party interference
	    and spoofing, by computing a cryptographic checksum and
	    hashing the IP packet header fields with a secure hashing
	    function.  This is then followed by an additional header
	    that contains the hash, to allow the information in the
	    packet to be authenticated.</para>
        </listitem>
      </itemizedlist>

      <para><acronym>ESP</acronym> and <acronym>AH</acronym> can
	either be used together or separately, depending on the
	environment.</para>

      <indexterm>
	<primary>VPN</primary>
      </indexterm>

      <indexterm>
	<primary>virtual private network</primary>
	<see>VPN</see>
      </indexterm>

      <para>IPsec can either be used to directly encrypt the traffic
	between two hosts (known as <emphasis>Transport
	  Mode</emphasis>); or to build <quote>virtual tunnels</quote>
	between two subnets, which could be used for secure
	communication between two corporate networks (known as
	<emphasis>Tunnel Mode</emphasis>).  The latter is more commonly
	known as a <emphasis>Virtual Private Network (VPN)</emphasis>.
	The &man.ipsec.4; manual page should be consulted for detailed
	information on the IPsec subsystem in FreeBSD.</para>

      <para>To add IPsec support to your kernel, add the following
	options to your kernel configuration file:</para>

      <indexterm>
	<primary>kernel options</primary>
	<secondary>IPSEC</secondary>
      </indexterm>

      <indexterm>
	<primary>kernel options</primary>
	<secondary>IPSEC_ESP</secondary>
      </indexterm>

      <screen>
options   IPSEC        #IP security
options   IPSEC_ESP    #IP security (crypto; define w/ IPSEC)
      </screen>

      <indexterm>
	<primary>kernel options</primary>
	<secondary>IPSEC_DEBUG</secondary>
      </indexterm>

      <para>If IPsec debugging support is desired, the following
	kernel option should also be added:</para>

      <screen>
options   IPSEC_DEBUG  #debug for IP security
      </screen>
    </sect2>

    <sect2>
      <title>The Problem</title>

      <para>There is no standard for what constitutes a VPN.  VPNs can
	be implemented using a number of different technologies, each of
	which have their own strengths and weaknesses.  This section
	presents a scenario, and the strategies used for implementing a
	VPN for this scenario.</para>
    </sect2>

    <sect2>
      <title>The Scenario: Two networks, connected to the Internet, to
        behave as one</title>

      <indexterm>
	<primary>VPN</primary>
	<secondary>creating</secondary>
      </indexterm>

      <para>The premise is as follows:</para>

      <itemizedlist>
        <listitem>
          <para>You have at least two sites</para>
        </listitem>
        <listitem>
          <para>Both sites are using IP internally</para>
        </listitem>
        <listitem>
          <para>Both sites are connected to the Internet, through a
            gateway that is running FreeBSD.</para>
        </listitem>
        <listitem>
          <para>The gateway on each network has at least one public IP
            address.</para>
        </listitem>
        <listitem>
          <para>The internal addresses of the two networks can be
            public or private IP addresses, it does not matter.  You can
            be running NAT on the gateway machine if necessary.</para>
        </listitem>
        <listitem>
          <para>The internal IP addresses of the two networks
            <emphasis>do not collide</emphasis>.  While I expect it is
            theoretically possible to use a combination of VPN
            technology and NAT to get this to work, I expect it to be a
            configuration nightmare.</para>
        </listitem>
      </itemizedlist>

      <para>If you find that you are trying to connect two networks,
        both of which, internally, use the same private IP address range
        (e.g. both of them use <hostid
        role="ipaddr">192.168.1.x</hostid>), then one of the networks will
        have to be renumbered.</para>

      <para>The network topology might look something like this:</para>

      <mediaobject>
	<imageobject>
	  <imagedata fileref="security/ipsec-network" align="center"/>
	</imageobject>

	<textobject>
<literallayout class="monospaced">Network #1            [ Internal Hosts ]    Private Net, 192.168.1.2-254
                      [   Win9x/NT/2K  ]
                      [      UNIX      ]
                               |
                               |
                        .---[fxp1]---.      Private IP, 192.168.1.1
                        |   FreeBSD  |
                        `---[fxp0]---'      Public IP, A.B.C.D
                               |
                               |
                      -=-=- Internet -=-=-
                               |
                               |
                        .---[fxp0]---.      Public IP, W.X.Y.Z
                        |   FreeBSD  |
                        `---[fxp1]---'      Private IP, 192.168.2.1
                               |
                               |
Network #2            [ Internal Hosts ]
                      [   Win9x/NT/2K  ]    Private Net, 192.168.2.2-254
                      [      UNIX      ]</literallayout>
	</textobject>
      </mediaobject>

      <para>Notice the two public IP addresses.  I will use the letters to
        refer to them in the rest of this article.  Anywhere you see those
        letters in this article, replace them with your own public IP
        addresses.  Note also that internally, the two gateway
        machines have .1 IP addresses, and that the two networks have
        different private IP addresses (<hostid
        role="ipaddr">192.168.1.x</hostid> and <hostid
        role="ipaddr">192.168.2.x</hostid> respectively).  All the
        machines on the private networks have been configured to use the
        <hostid role="ipaddr">.1</hostid> machine as their default
        gateway.</para>

      <para>The intention is that, from a network point of view, each
        network should view the machines on the other network as though
        they were directly attached the same router -- albeit a slightly
        slow router with an occasional tendency to drop packets.</para>

      <para>This means that (for example), machine <hostid
        role="ipaddr">192.168.1.20</hostid> should be able to run</para>

      <programlisting>ping 192.168.2.34</programlisting>

      <para>and have it work, transparently.  &windows; machines should
        be able to see the machines on the other network, browse file
        shares, and so on, in exactly the same way that they can browse
        machines on the local network.</para>

      <para>And the whole thing has to be secure.  This means that
        traffic between the two networks has to be encrypted.</para>

      <para>Creating a VPN between these two networks is a multi-step
        process.  The stages are as follows:</para>

      <orderedlist>
        <listitem>
          <para>Create a <quote>virtual</quote> network link between the two
            networks, across the Internet.  Test it, using tools like
            &man.ping.8;, to make sure it works.</para>
        </listitem>

        <listitem>
          <para>Apply security policies to ensure that traffic between
            the two networks is transparently encrypted and decrypted as
            necessary.  Test this, using tools like &man.tcpdump.1;, to
            ensure that traffic is encrypted.</para>
        </listitem>

        <listitem>
          <para>Configure additional software on the FreeBSD gateways,
            to allow &windows; machines to see one another across the
            VPN.</para>
        </listitem>
      </orderedlist>

    <sect3>
      <title>Step 1: Creating and testing a <quote>virtual</quote>
        network link</title>

      <para>Suppose that you were logged in to the gateway machine on
        network #1 (with public IP address <hostid
        role="ipaddr">A.B.C.D</hostid>, private IP address <hostid
        role="ipaddr">192.168.1.1</hostid>), and you ran <command>ping
        192.168.2.1</command>, which is the private address of the machine
        with IP address <hostid role="ipaddr">W.X.Y.Z</hostid>.  What
        needs to happen in order for this to work?</para>

      <orderedlist>
        <listitem>
          <para>The gateway machine needs to know how to reach <hostid
            role="ipaddr">192.168.2.1</hostid>.  In other words, it needs
            to have a route to <hostid
            role="ipaddr">192.168.2.1</hostid>.</para>
        </listitem>
        <listitem>
          <para>Private IP addresses, such as those in the <hostid
            role="ipaddr">192.168.x</hostid> range are not supposed to
            appear on the Internet at large.  Instead, each packet you
            send to <hostid role="ipaddr">192.168.2.1</hostid> will need
            to be wrapped up inside another packet.  This packet will need
            to appear to be from <hostid role="ipaddr">A.B.C.D</hostid>,
            and it will have to be sent to <hostid
            role="ipaddr">W.X.Y.Z</hostid>.  This process is called
            <firstterm>encapsulation</firstterm>.</para>
        </listitem>
        <listitem>
          <para>Once this packet arrives at <hostid
            role="ipaddr">W.X.Y.Z</hostid> it will need to
            <quote>unencapsulated</quote>, and delivered to <hostid
            role="ipaddr">192.168.2.1</hostid>.</para>
	</listitem>
      </orderedlist>

      <para>You can think of this as requiring a <quote>tunnel</quote>
        between the two networks.  The two <quote>tunnel mouths</quote> are the IP
        addresses <hostid role="ipaddr">A.B.C.D</hostid> and <hostid
        role="ipaddr">W.X.Y.Z</hostid>, and the tunnel must be told the
        addresses of the private IP addresses that will be allowed to pass
        through it.  The tunnel is used to transfer traffic with private
        IP addresses across the public Internet.</para>

      <para>This tunnel is created by using the generic interface, or
        <devicename>gif</devicename> devices on FreeBSD.  As you can
        imagine, the <devicename>gif</devicename> interface on each
        gateway host must be configured with four IP addresses; two for
        the public IP addresses, and two for the private IP
        addresses.</para>

      <para>Support for the gif device must be compiled in to the
        &os; kernel on both machines.  You can do this by adding the
        line:</para>

      <programlisting>device gif</programlisting>

      <para>to the kernel configuration files on both machines, and
        then compile, install, and reboot as normal.</para>

      <para>Configuring the tunnel is a two step process.  First the
        tunnel must be told what the outside (or public) IP addresses
        are, using &man.ifconfig.8;.  Then the private IP addresses must be
        configured using &man.ifconfig.8;.</para>

      <para>On the gateway machine on network #1 you would run the
        following commands to configure the tunnel.</para>

      <screen>&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> create</userinput>
&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> tunnel <replaceable>A.B.C.D</replaceable> <replaceable>W.X.Y.Z</replaceable></userinput>
&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> inet <replaceable>192.168.1.1</replaceable> <replaceable>192.168.2.1</replaceable> netmask <replaceable>0xffffffff</replaceable></userinput>
      </screen>

      <para>On the other gateway machine you run the same commands,
        but with the order of the IP addresses reversed.</para>

      <screen>&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> create</userinput>
&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> tunnel <replaceable>W.X.Y.Z</replaceable> <replaceable>A.B.C.D</replaceable></userinput>
&prompt.root; <userinput>ifconfig <replaceable>gif0</replaceable> inet <replaceable>192.168.2.1</replaceable> <replaceable>192.168.1.1</replaceable> netmask <replaceable>0xffffffff</replaceable></userinput>
      </screen>

      <para>You can then run:</para>

      <programlisting>ifconfig gif0</programlisting>

      <para>to see the configuration.  For example, on the network #1
        gateway, you would see this:</para>

      <screen>&prompt.root; <userinput>ifconfig gif0</userinput>
gif0: flags=8051&lt;UP,POINTOPOINT,RUNNING,MULTICAST&gt; mtu 1280
        tunnel inet A.B.C.D --&gt; W.X.Y.Z
        inet 192.168.1.1 --&gt; 192.168.2.1 netmask 0xffffffff
      </screen>

      <para>As you can see, a tunnel has been created between the
        physical addresses <hostid role="ipaddr">A.B.C.D</hostid> and
        <hostid role="ipaddr">W.X.Y.Z</hostid>, and the traffic allowed
        through the tunnel is that between <hostid
        role="ipaddr">192.168.1.1</hostid> and <hostid
        role="ipaddr">192.168.2.1</hostid>.</para>

      <para>This will also have added an entry to the routing table
        on both machines, which you can examine with the command <command>netstat -rn</command>.
        This output is from the gateway host on network #1.</para>

      <screen>&prompt.root; <userinput>netstat -rn</userinput>
Routing tables

Internet:
Destination      Gateway       Flags    Refs    Use    Netif  Expire
...
192.168.2.1      192.168.1.1   UH        0        0    gif0
...
      </screen>

      <para>As the <quote>Flags</quote> value indicates, this is a
        host route, which means that each gateway knows how to reach the
        other gateway, but they do not know how to reach the rest of
        their respective networks.  That problem will be fixed
        shortly.</para>

      <para>It is likely that you are running a firewall on both
        machines.  This will need to be circumvented for your VPN
        traffic.  You might want to allow all traffic between both
        networks, or you might want to include firewall rules that
        protect both ends of the VPN from one another.</para>

      <para>It greatly simplifies testing if you configure the
        firewall to allow all traffic through the VPN.  You can always
        tighten things up later.  If you are using &man.ipfw.8; on the
        gateway machines then a command like</para>

      <programlisting>ipfw add 1 allow ip from any to any via gif0</programlisting>

      <para>will allow all traffic between the two end points of the
        VPN, without affecting your other firewall rules.  Obviously
        you will need to run this command on both gateway hosts.</para>

      <para>This is sufficient to allow each gateway machine to ping
        the other.  On <hostid role="ipaddr">192.168.1.1</hostid>, you
        should be able to run</para>

      <programlisting>ping 192.168.2.1</programlisting>

      <para>and get a response, and you should be able to do the same
        thing on the other gateway machine.</para>

      <para>However, you will not be able to reach internal machines
        on either network yet.  This is because of the routing --
        although the gateway machines know how to reach one another,
        they do not know how to reach the network behind each one.</para>

      <para>To solve this problem you must add a static route on each
        gateway machine.  The command to do this on the first gateway
        would be:</para>

      <programlisting>route add 192.168.2.0 192.168.2.1 netmask 0xffffff00
      </programlisting>

      <para>This says <quote>In order to reach the hosts on the
        network <hostid role="ipaddr">192.168.2.0</hostid>, send the
        packets to the host <hostid
        role="ipaddr">192.168.2.1</hostid></quote>.  You will need to
        run a similar command on the other gateway, but with the
        <hostid role="ipaddr">192.168.1.x</hostid> addresses
        instead.</para>

      <para>IP traffic from hosts on one network will now be able to
        reach hosts on the other network.</para>

      <para>That has now created two thirds of a VPN between the two
        networks, in as much as it is <quote>virtual</quote> and it is a
        <quote>network</quote>.  It is not private yet.  You can test
        this using &man.ping.8; and &man.tcpdump.1;.  Log in to the
        gateway host and run</para>

      <programlisting>tcpdump dst host 192.168.2.1</programlisting>

      <para>In another log in session on the same host run</para>

      <programlisting>ping 192.168.2.1</programlisting>

      <para>You will see output that looks something like this:</para>

      <programlisting>
16:10:24.018080 192.168.1.1 &gt; 192.168.2.1: icmp: echo request
16:10:24.018109 192.168.1.1 &gt; 192.168.2.1: icmp: echo reply
16:10:25.018814 192.168.1.1 &gt; 192.168.2.1: icmp: echo request
16:10:25.018847 192.168.1.1 &gt; 192.168.2.1: icmp: echo reply
16:10:26.028896 192.168.1.1 &gt; 192.168.2.1: icmp: echo request
16:10:26.029112 192.168.1.1 &gt; 192.168.2.1: icmp: echo reply
      </programlisting>

      <para>As you can see, the ICMP messages are going back and forth
        unencrypted.  If you had used the <option>-s</option> parameter to
        &man.tcpdump.1; to grab more bytes of data from the packets you
        would see more information.</para>

      <para>Obviously this is unacceptable.  The next section will
        discuss securing the link between the two networks so that
        all traffic is automatically encrypted.</para>

      <itemizedlist>
        <title>Summary:</title>
        <listitem>
          <para>Configure both kernels with <quote>device gif</quote>.</para>
        </listitem>
        <listitem>
          <para>Edit <filename>/etc/rc.conf</filename> on gateway host
            #1 and add the following lines (replacing IP addresses as
            necessary).</para>
          <programlisting>gif_interfaces="gif0"
gifconfig_gif0="A.B.C.D W.X.Y.Z"
ifconfig_gif0="inet 192.168.1.1 192.168.2.1 netmask 0xffffffff"
static_routes="vpn"
route_vpn="192.168.2.0 192.168.2.1 netmask 0xffffff00"
          </programlisting>
        </listitem>

        <listitem>
          <para>Edit your firewall script
          (<filename>/etc/rc.firewall</filename>, or similar) on both
          hosts, and add</para>

          <programlisting>ipfw add 1 allow ip from any to any via gif0</programlisting>
        </listitem>
        <listitem>
          <para>Make similar changes to
            <filename>/etc/rc.conf</filename> on gateway host #2,
            reversing the order of IP addresses.</para>
        </listitem>
      </itemizedlist>
    </sect3>

    <sect3>
      <title>Step 2: Securing the link</title>

      <para>To secure the link we will be using IPsec.  IPsec provides
        a mechanism for two hosts to agree on an encryption key, and to
        then use this key in order to encrypt data between the two
        hosts.</para>

      <para>The are two areas of configuration to be considered here.</para>

      <orderedlist>
        <listitem>
          <para>There must be a mechanism for two hosts to agree on the
            encryption mechanism to use.  Once two hosts have agreed on
            this mechanism there is said to be a <quote>security association</quote>
            between them.</para>
        </listitem>
        <listitem>
          <para>There must be a mechanism for specifying which traffic
            should be encrypted.  Obviously, you do not want to encrypt
            all your outgoing traffic -- you only want to encrypt the
            traffic that is part of the VPN.  The rules that you put in
            place to determine what traffic will be encrypted are called
            <quote>security policies</quote>.</para>
         </listitem>
       </orderedlist>

       <para>Security associations and security policies are both
         maintained by the kernel, and can be modified by userland
         programs.  However, before you can do this you must configure the
         kernel to support IPsec and the Encapsulated Security Payload
         (ESP) protocol.  This is done by configuring a kernel with:</para>

       <indexterm>
	 <primary>kernel options</primary>
	 <secondary>IPSEC</secondary>
       </indexterm>

       <programlisting>options IPSEC
options IPSEC_ESP
       </programlisting>

       <para>and recompiling, reinstalling, and rebooting.  As before
         you will need to do this to the kernels on both of the gateway
         hosts.</para>

       <indexterm>
	 <primary>IKE</primary>
       </indexterm>

       <para>You have two choices when it comes to setting up security
         associations.  You can configure them by hand between two hosts,
         which entails choosing the encryption algorithm, encryption keys,
         and so forth, or you can use daemons that implement the Internet
         Key Exchange protocol (IKE) to do this for you.</para>

       <para>I recommend the latter.  Apart from anything else, it is
         easier to set up.</para>

       <indexterm>
	 <primary>IPsec</primary>
	 <secondary>security policies</secondary>
       </indexterm>

       <indexterm>
	 <primary><command>setkey</command></primary>
       </indexterm>

       <para>Editing and displaying security policies is carried out
         using &man.setkey.8;.  By analogy, <command>setkey</command> is
         to the kernel's security policy tables as &man.route.8; is to
         the kernel's routing tables.  <command>setkey</command> can
         also display the current security associations, and to continue
         the analogy further, is akin to <command>netstat -r</command>
         in that respect.</para>

       <para>There are a number of choices for daemons to manage
         security associations with FreeBSD.  This article will describe
         how to use one of these, racoon&nbsp;&mdash; which is available from
	 <filename role="package">security/ipsec-tools</filename> in the &os; Ports
	 collection.</para>

       <indexterm>
	 <primary>racoon</primary>
       </indexterm>

       <para>The <application>racoon</application> software must be run on both gateway hosts.  On each host it
         is configured with the IP address of the other end of the VPN,
         and a secret key (which you choose, and must be the same on both
         gateways).</para>

       <para>The two daemons then contact one another, confirm that they
         are who they say they are (by using the secret key that you
         configured).  The daemons then generate a new secret key, and use
         this to encrypt the traffic over the VPN.  They periodically
         change this secret, so that even if an attacker were to crack one
         of the keys (which is as theoretically close to unfeasible as it
         gets) it will not do them much good -- by the time they have cracked
         the key the two daemons have chosen another one.</para>

       <para>The configuration file for racoon is stored in
         <filename>${PREFIX}/etc/racoon</filename>.  You should find a
         configuration file there, which should not need to be changed
         too much.  The other component of racoon's configuration,
         which you will need to change, is the <quote>pre-shared
         key</quote>.</para>

       <para>The default racoon configuration expects to find this in
         the file <filename>${PREFIX}/etc/racoon/psk.txt</filename>.  It is important to note
         that the pre-shared key is <emphasis>not</emphasis> the key that will be used to
         encrypt your traffic across the VPN link, it is simply a token
         that allows the key management daemons to trust one another.</para>

       <para><filename>psk.txt</filename> contains a line for each
         remote site you are dealing with.  In this example, where there
         are two sites, each <filename>psk.txt</filename> file will contain one line (because
         each end of the VPN is only dealing with one other end).</para>

       <para>On gateway host #1 this line should look like this:</para>

       <programlisting>W.X.Y.Z            secret</programlisting>

       <para>That is, the <emphasis>public</emphasis> IP address of the remote end,
         whitespace, and a text string that provides the secret.
         Obviously, you should not use <quote>secret</quote> as your key -- the normal
         rules for choosing a password apply.</para>

       <para>On gateway host #2 the line would look like this</para>

       <programlisting>A.B.C.D            secret</programlisting>

       <para>That is, the public IP address of the remote end, and the
         same secret key.  <filename>psk.txt</filename> must be mode
         <literal>0600</literal> (i.e., only read/write to
         <username>root</username>) before racoon will run.</para>

       <para>You must run racoon on both gateway machines.  You will
         also need to add some firewall rules to allow the IKE traffic,
         which is carried over UDP to the ISAKMP (Internet Security Association
         Key Management Protocol) port.  Again, this should be fairly early in
         your firewall ruleset.</para>

       <programlisting>ipfw add 1 allow udp from A.B.C.D to W.X.Y.Z isakmp
ipfw add 1 allow udp from W.X.Y.Z to A.B.C.D isakmp
       </programlisting>

       <para>Once racoon is running you can try pinging one gateway host
         from the other.  The connection is still not encrypted, but
         racoon will then set up the security associations between the two
         hosts -- this might take a moment, and you may see this as a
         short delay before the ping commands start responding.</para>

       <para>Once the security association has been set up you can
         view it using &man.setkey.8;.  Run</para>

       <programlisting>setkey -D</programlisting>

       <para>on either host to view the security association information.</para>

       <para>That's one half of the problem.  The other half is setting
         your security policies.</para>

       <para>To create a sensible security policy, let's review what's
         been set up so far.  This discussions hold for both ends of the
         link.</para>

       <para>Each IP packet that you send out has a header that contains
         data about the packet.  The header includes the IP addresses of
         both the source and destination.  As we already know, private IP
         addresses, such as the <hostid role="ipaddr">192.168.x.y</hostid>
         range are not supposed to appear on the public Internet.
         Instead, they must first be encapsulated inside another packet.
         This packet must have the public source and destination IP
         addresses substituted for the private addresses.</para>

       <para>So if your outgoing packet started looking like this:</para>

	<mediaobject>
	  <imageobject>
	    <imagedata fileref="security/ipsec-out-pkt" align="center"/>
	  </imageobject>

	  <textobject>
	    <literallayout class="monospaced">
  .----------------------.
  | Src: 192.168.1.1     |
  | Dst: 192.168.2.1     |
  | &lt;other header info&gt;  |
  +----------------------+
  | &lt;packet data&gt;        |
  `----------------------'</literallayout>
	  </textobject>
	</mediaobject>

       <para>Then it will be encapsulated inside another packet, looking
         something like this:</para>

	<mediaobject>
	  <imageobject>
	    <imagedata fileref="security/ipsec-encap-pkt" align="center"/>
	  </imageobject>

	  <textobject>
	    <literallayout class="monospaced">
  .--------------------------.
  | Src: A.B.C.D             |
  | Dst: W.X.Y.Z             |
  | &lt;other header info&gt;      |
  +--------------------------+
  | .----------------------. |
  | | Src: 192.168.1.1     | |
  | | Dst: 192.168.2.1     | |
  | | &lt;other header info&gt;  | |
  | +----------------------+ |
  | | &lt;packet data&gt;        | |
  | `----------------------' |
  `--------------------------'</literallayout>
	  </textobject>
	</mediaobject>

       <para>This encapsulation is carried out by the
         <devicename>gif</devicename> device.  As
         you can see, the packet now has real IP addresses on the outside,
         and our original packet has been wrapped up as data inside the
         packet that will be put out on the Internet.</para>

       <para>Obviously, we want all traffic between the VPNs to be
         encrypted.  You might try putting this in to words, as:</para>

       <para><quote>If a packet leaves from <hostid
         role="ipaddr">A.B.C.D</hostid>, and it is destined for <hostid
         role="ipaddr">W.X.Y.Z</hostid>, then encrypt it, using the
         necessary security associations.</quote></para>

       <para><quote>If a packet arrives from <hostid
         role="ipaddr">W.X.Y.Z</hostid>, and it is destined for <hostid
         role="ipaddr">A.B.C.D</hostid>, then decrypt it, using the
         necessary security associations.</quote></para>

       <para>That's close, but not quite right.  If you did this, all
         traffic to and from <hostid role="ipaddr">W.X.Y.Z</hostid>, even
         traffic that was not part of the VPN, would be encrypted.  That's
         not quite what you want.  The correct policy is as follows</para>

       <para><quote>If a packet leaves from <hostid
         role="ipaddr">A.B.C.D</hostid>, and that packet is encapsulating
         another packet, and it is destined for <hostid
         role="ipaddr">W.X.Y.Z</hostid>, then encrypt it, using the
         necessary security associations.</quote></para>

       <para><quote>If a packet arrives from <hostid
         role="ipaddr">W.X.Y.Z</hostid>, and that packet is encapsulating
         another packet, and it is destined for <hostid
         role="ipaddr">A.B.C.D</hostid>, then decrypt it, using the
         necessary security associations.</quote></para>

       <para>A subtle change, but a necessary one.</para>

       <para>Security policies are also set using &man.setkey.8;.
         &man.setkey.8; features a configuration language for defining the
         policy.  You can either enter configuration instructions via
         stdin, or you can use the <option>-f</option> option to specify a
         filename that contains configuration instructions.</para>

       <para>The configuration on gateway host #1 (which has the public
         IP address <hostid role="ipaddr">A.B.C.D</hostid>) to force all
         outbound traffic to <hostid role="ipaddr">W.X.Y.Z</hostid> to be
         encrypted is:</para>

       <programlisting>
spdadd A.B.C.D/32 W.X.Y.Z/32 ipencap -P out ipsec esp/tunnel/A.B.C.D-W.X.Y.Z/require;
       </programlisting>

       <para>Put these commands in a file (e.g.
       <filename>/etc/ipsec.conf</filename>) and then run</para>

       <screen>&prompt.root; <userinput>setkey -f /etc/ipsec.conf</userinput></screen>

       <para><option>spdadd</option> tells &man.setkey.8; that we want
         to add a rule to the secure policy database.  The rest of this
         line specifies which packets will match this policy.  <hostid
         role="ipaddr">A.B.C.D/32</hostid> and <hostid
         role="ipaddr">W.X.Y.Z/32</hostid> are the IP addresses and
         netmasks that identify the network or hosts that this policy will
         apply to.  In this case, we want it to apply to traffic between
         these two hosts.  <option>ipencap</option> tells the kernel that
         this policy should only apply to packets that encapsulate other
         packets.  <option>-P out</option> says that this policy applies
         to outgoing packets, and <option>ipsec</option> says that the
         packet will be secured.</para>

       <para>The second line specifies how this packet will be
         encrypted.  <option>esp</option> is the protocol that will be
         used, while <option>tunnel</option> indicates that the packet
         will be further encapsulated in an IPsec packet.  The repeated
         use of <hostid role="ipaddr">A.B.C.D</hostid> and <hostid
         role="ipaddr">W.X.Y.Z</hostid> is used to select the security
         association to use, and the final <option>require</option>
         mandates that packets must be encrypted if they match this
         rule.</para>

       <para>This rule only matches outgoing packets.  You will need a
         similar rule to match incoming packets.</para>

       <programlisting>spdadd W.X.Y.Z/32 A.B.C.D/32 ipencap -P in ipsec esp/tunnel/W.X.Y.Z-A.B.C.D/require;</programlisting>

       <para>Note the <option>in</option> instead of
         <option>out</option> in this case, and the necessary reversal of
         the IP addresses.</para>

       <para>The other gateway host (which has the public IP address
         <hostid role="ipaddr">W.X.Y.Z</hostid>) will need similar rules.</para>

       <programlisting>spdadd W.X.Y.Z/32 A.B.C.D/32 ipencap -P out ipsec esp/tunnel/W.X.Y.Z-A.B.C.D/require;
spdadd A.B.C.D/32 W.X.Y.Z/32 ipencap -P in ipsec esp/tunnel/A.B.C.D-W.X.Y.Z/require;</programlisting>

       <para>Finally, you need to add firewall rules to allow ESP and
        IPENCAP packets back and forth.  These rules will need to be
        added to both hosts.</para>

       <programlisting>ipfw add 1 allow esp from A.B.C.D to W.X.Y.Z
ipfw add 1 allow esp from W.X.Y.Z to A.B.C.D
ipfw add 1 allow ipencap from A.B.C.D to W.X.Y.Z
ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D
       </programlisting>

       <para>Because the rules are symmetric you can use the same rules
         on each gateway host.</para>

       <para>Outgoing packets will now look something like this:</para>

	<mediaobject>
	  <imageobject>
	    <imagedata fileref="security/ipsec-crypt-pkt" align="center"/>
	  </imageobject>

	  <textobject>
	    <literallayout class="monospaced">
  .------------------------------.  --------------------------.
  | Src: A.B.C.D                 |                            |
  | Dst: W.X.Y.Z                 |                            |
  | &lt;other header info&gt;          |                            |  Encrypted
  +------------------------------+                            |  packet.
  | .--------------------------. |  -------------.            |  contents
  | | Src: A.B.C.D             | |               |            |  are
  | | Dst: W.X.Y.Z             | |               |            |  completely
  | | &lt;other header info&gt;      | |               |            |- secure
  | +--------------------------+ |               |  Encap'd   |  from third
  | | .----------------------. | |  -.           |  packet    |  party
  | | | Src: 192.168.1.1     | | |   |  Original |- with real |  snooping
  | | | Dst: 192.168.2.1     | | |   |  packet,  |  IP addr   |
  | | | &lt;other header info&gt;  | | |   |- private  |            |
  | | +----------------------+ | |   |  IP addr  |            |
  | | | &lt;packet data&gt;        | | |   |           |            |
  | | `----------------------' | |  -'           |            |
  | `--------------------------' |  -------------'            |
  `------------------------------'  --------------------------'
	    </literallayout>
	  </textobject>
	</mediaobject>

       <para>When they are received by the far end of the VPN they will
         first be decrypted (using the security associations that have
         been negotiated by racoon).  Then they will enter the
         <devicename>gif</devicename> interface, which will unwrap
         the second layer, until you are left with the innermost
         packet, which can then travel in to the inner network.</para>

       <para>You can check the security using the same &man.ping.8; test from
         earlier.  First, log in to the
         <hostid role="ipaddr">A.B.C.D</hostid> gateway machine, and
         run:</para>

       <programlisting>tcpdump dst host 192.168.2.1</programlisting>

       <para>In another log in session on the same host run</para>

       <programlisting>ping 192.168.2.1</programlisting>

       <para>This time you should see output like the following:</para>

       <programlisting>XXX tcpdump output</programlisting>

       <para>Now, as you can see, &man.tcpdump.1; shows the ESP packets.  If
         you try to examine them with the <option>-s</option> option you will see
         (apparently) gibberish, because of the encryption.</para>

      <para>Congratulations.  You have just set up a VPN between two
        remote sites.</para>

      <itemizedlist>
        <title>Summary</title>
        <listitem>
          <para>Configure both kernels with:</para>

          <programlisting>options IPSEC
options IPSEC_ESP
          </programlisting>
        </listitem>
        <listitem>
          <para>Install <filename
            role="package">security/ipsec-tools</filename>.  Edit
            <filename>${PREFIX}/etc/racoon/psk.txt</filename> on both
            gateway hosts, adding an entry for the remote host's IP
            address and a secret key that they both know.  Make sure
            this file is mode 0600.</para>
        </listitem>
        <listitem>
          <para>Add the following lines to
            <filename>/etc/rc.conf</filename> on each host:</para>

          <programlisting>ipsec_enable="YES"
ipsec_file="/etc/ipsec.conf"
          </programlisting>
        </listitem>
        <listitem>
          <para>Create an <filename>/etc/ipsec.conf</filename> on each
            host that contains the necessary spdadd lines.  On gateway
            host #1 this would be:</para>

          <programlisting>
spdadd A.B.C.D/32 W.X.Y.Z/32 ipencap -P out ipsec
  esp/tunnel/A.B.C.D-W.X.Y.Z/require;
spdadd W.X.Y.Z/32 A.B.C.D/32 ipencap -P in ipsec
  esp/tunnel/W.X.Y.Z-A.B.C.D/require;
</programlisting>

          <para>On gateway host #2 this would be:</para>

<programlisting>
spdadd W.X.Y.Z/32 A.B.C.D/32 ipencap -P out ipsec
  esp/tunnel/W.X.Y.Z-A.B.C.D/require;
spdadd A.B.C.D/32 W.X.Y.Z/32 ipencap -P in ipsec
  esp/tunnel/A.B.C.D-W.X.Y.Z/require;
</programlisting>
        </listitem>
        <listitem>
          <para>Add firewall rules to allow IKE, ESP, and IPENCAP
            traffic to both hosts:</para>

          <programlisting>
ipfw add 1 allow udp from A.B.C.D to W.X.Y.Z isakmp
ipfw add 1 allow udp from W.X.Y.Z to A.B.C.D isakmp
ipfw add 1 allow esp from A.B.C.D to W.X.Y.Z
ipfw add 1 allow esp from W.X.Y.Z to A.B.C.D
ipfw add 1 allow ipencap from A.B.C.D to W.X.Y.Z
ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D
          </programlisting>
        </listitem>
      </itemizedlist>

      <para>The previous two steps should suffice to get the VPN up and
        running.  Machines on each network will be able to refer to one
        another using IP addresses, and all traffic across the link will
        be automatically and securely encrypted.</para>
    </sect3>
    </sect2>
  </sect1>

  <sect1 id="openssh">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Chern</firstname>
	  <surname>Lee</surname>
	  <contrib>Contributed by </contrib>
	</author>
	<!-- 21 April 2001 -->
      </authorgroup>
    </sect1info>

    <title>OpenSSH</title>
    <indexterm><primary>OpenSSH</primary></indexterm>
    <indexterm>
      <primary>security</primary>
      <secondary>OpenSSH</secondary>
    </indexterm>

    <para><application>OpenSSH</application> is a set of network connectivity tools used to
      access remote machines securely.  It can be used as a direct
      replacement for <command>rlogin</command>,
      <command>rsh</command>, <command>rcp</command>, and
      <command>telnet</command>.  Additionally, TCP/IP
      connections can be tunneled/forwarded securely through SSH.
      <application>OpenSSH</application> encrypts all traffic to effectively eliminate eavesdropping,
      connection hijacking, and other network-level attacks.</para>

    <para><application>OpenSSH</application> is maintained by the OpenBSD project, and is based
      upon SSH v1.2.12 with all the recent bug fixes and updates.  It
      is compatible with both SSH protocols 1 and 2.</para>

    <sect2>
      <title>Advantages of Using OpenSSH</title>

      <para>Normally, when using &man.telnet.1; or &man.rlogin.1;,
        data is sent over the network in an clear, un-encrypted form.
        Network sniffers anywhere in between the client and server can
        steal your user/password information or data transferred in
        your session.  <application>OpenSSH</application> offers a variety of authentication and
        encryption methods to prevent this from happening.</para>
    </sect2>

    <sect2>
      <title>Enabling sshd</title>
      <indexterm>
        <primary>OpenSSH</primary>
        <secondary>enabling</secondary>
      </indexterm>

      <para>The
        <application>sshd</application> is an option presented during
        a <literal>Standard</literal> install of &os;.  To see if
        <application>sshd</application> is enabled, check the
        <filename>rc.conf</filename> file for:</para>
      <screen>sshd_enable="YES"</screen>
      <para>This will load &man.sshd.8;, the daemon program for <application>OpenSSH</application>,
	the next time your system initializes.  Alternatively, it is
	possible to use <filename>/etc/rc.d/sshd</filename> &man.rc.8;
	script to start <application>OpenSSH</application>:</para>

      <programlisting>/etc/rc.d/sshd start</programlisting>
    </sect2>

    <sect2>
      <title>SSH Client</title>
      <indexterm>
        <primary>OpenSSH</primary>
        <secondary>client</secondary>
      </indexterm>

      <para>The &man.ssh.1; utility works similarly to
        &man.rlogin.1;.</para>

      <screen>&prompt.root; <userinput>ssh <replaceable>user@example.com</replaceable></userinput>
Host key not found from the list of known hosts.
Are you sure you want to continue connecting (yes/no)? <userinput>yes</userinput>
Host 'example.com' added to the list of known hosts.
user@example.com's password: <userinput>*******</userinput></screen>

      <para>The login will continue just as it would have if a session was
        created using <command>rlogin</command> or
        <command>telnet</command>.  SSH utilizes a key fingerprint
        system for verifying the authenticity of the server when the
        client connects.  The user is prompted to enter
	<literal>yes</literal> only when
        connecting for the first time.  Future attempts to login are all
        verified against the saved fingerprint key.  The SSH client
        will alert you if the saved fingerprint differs from the
        received fingerprint on future login attempts.  The fingerprints
        are saved in <filename>~/.ssh/known_hosts</filename>, or
	<filename>~/.ssh/known_hosts2</filename> for SSH v2
	fingerprints.</para>

      <para>By default, recent versions of the
        <application>OpenSSH</application> servers only accept SSH v2
        connections.  The client will use version 2 if possible and
        will fall back to version 1.  The client can also be forced to
        use one or the other by passing it the <option>-1</option> or
        <option>-2</option> for version 1 or version 2, respectively.
        The version 1 compatibility is maintained in the client for
        backwards compatibility with older versions.</para>
    </sect2>

    <sect2>
      <title>Secure Copy</title>
      <indexterm>
        <primary>OpenSSH</primary>
        <secondary>secure copy</secondary>
      </indexterm>
      <indexterm><primary><command>scp</command></primary></indexterm>

      <para>The &man.scp.1; command works similarly to
	&man.rcp.1;; it copies a file to or from a remote machine,
	except in a secure fashion.</para>

      <screen>&prompt.root; <userinput> scp <replaceable>user@example.com:/COPYRIGHT COPYRIGHT</replaceable></userinput>
user@example.com's password: <userinput>*******</userinput>
COPYRIGHT            100% |*****************************|  4735
00:00
&prompt.root;</screen>
      <para>Since the fingerprint was already saved for this host in the
        previous example, it is verified when using &man.scp.1;
        here.</para>

      <para>The arguments passed to &man.scp.1; are similar
	to &man.cp.1;, with the file or files in the first
	argument, and the destination in the second.  Since the file is
	fetched over the network, through SSH, one or more of the file
	arguments takes on the form
	<option>user@host:&lt;path_to_remote_file&gt;</option>.</para>

    </sect2>

    <sect2>
      <title>Configuration</title>
      <indexterm>
        <primary>OpenSSH</primary>
        <secondary>configuration</secondary>
      </indexterm>

      <para>The system-wide configuration files for both the
        <application>OpenSSH</application> daemon and client reside
        within the <filename>/etc/ssh</filename> directory.</para>

      <para><filename>ssh_config</filename> configures the client
        settings, while <filename>sshd_config</filename> configures the
        daemon.</para>

      <para>Additionally, the <option>sshd_program</option>
	(<filename>/usr/sbin/sshd</filename> by default), and
	<option>sshd_flags</option> <filename>rc.conf</filename>
	options can provide more levels of configuration.</para>
    </sect2>

    <sect2 id="security-ssh-keygen">
      <title>ssh-keygen</title>

      <para>Instead of using passwords, &man.ssh-keygen.1; can
        be used to generate DSA or RSA keys to authenticate a user:</para>

      <screen>&prompt.user; <userinput>ssh-keygen -t <replaceable>dsa</replaceable></userinput>
Generating public/private dsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_dsa):
Created directory '/home/user/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/user/.ssh/id_dsa.
Your public key has been saved in /home/user/.ssh/id_dsa.pub.
The key fingerprint is:
bb:48:db:f2:93:57:80:b6:aa:bc:f5:d5:ba:8f:79:17 user@host.example.com
</screen>

      <para>&man.ssh-keygen.1; will create a public and private
        key pair for use in authentication.  The private key is stored in
        <filename>~/.ssh/id_dsa</filename> or
        <filename>~/.ssh/id_rsa</filename>, whereas the public key is
        stored in <filename>~/.ssh/id_dsa.pub</filename> or
        <filename>~/.ssh/id_rsa.pub</filename>, respectively for DSA and
        RSA key types.  The public key must be placed in
        <filename>~/.ssh/authorized_keys</filename> of the remote
        machine in order for the setup to work.  Similarly, RSA version
        1 public keys should be placed in
        <filename>~/.ssh/authorized_keys</filename>.</para>

      <para>This will allow connection to the remote machine based upon
        SSH keys instead of passwords.</para>

      <para>If a passphrase is used in &man.ssh-keygen.1;, the user
        will be prompted for a password each time in order to use the
        private key.  &man.ssh-agent.1; can alleviate the strain of
        repeatedly entering long passphrases, and is explored in the
        <xref linkend="security-ssh-agent"/> section below.</para>

      <warning><para>The various options and files can be different
        according to the <application>OpenSSH</application> version
        you have on your system; to avoid problems you should consult
        the &man.ssh-keygen.1; manual page.</para></warning>
    </sect2>

    <sect2 id="security-ssh-agent">
      <title>ssh-agent and ssh-add</title>

      <para>The &man.ssh-agent.1; and &man.ssh-add.1; utilities provide
        methods for <application>SSH</application> keys to be loaded
        into memory for use, without needing to type the passphrase
        each time.</para>

      <para>The &man.ssh-agent.1; utility will handle the authentication
        using the private key(s) that are loaded into it.
        &man.ssh-agent.1; should be used to launch another application.
        At the most basic level, it could spawn a shell or at a more
        advanced level, a window manager.</para>

      <para>To use &man.ssh-agent.1; in a shell, first it will need to
        be spawned with a shell as an argument.  Secondly, the
        identity needs to be added by running &man.ssh-add.1; and
        providing it the passphrase for the private key.  Once these
        steps have been completed the user will be able to &man.ssh.1;
        to any host that has the corresponding public key installed.
        For example:</para>

      <screen>&prompt.user; ssh-agent <replaceable>csh</replaceable>
&prompt.user; ssh-add
Enter passphrase for /home/user/.ssh/id_dsa:
Identity added: /home/user/.ssh/id_dsa (/home/user/.ssh/id_dsa)
&prompt.user;</screen>

      <para>To use &man.ssh-agent.1; in X11, a call to
        &man.ssh-agent.1; will need to be placed in
        <filename>~/.xinitrc</filename>.  This will provide the
        &man.ssh-agent.1; services to all programs launched in X11.
        An example <filename>~/.xinitrc</filename> file might look
        like this:</para>

      <programlisting>exec ssh-agent <replaceable>startxfce4</replaceable></programlisting>

      <para>This would launch &man.ssh-agent.1;, which would in turn
        launch <application>XFCE</application>, every time X11 starts.
        Then once that is done and X11 has been restarted so that the
        changes can take effect, simply run &man.ssh-add.1; to load
        all of your SSH keys.</para>
    </sect2>

    <sect2 id="security-ssh-tunneling">
      <title>SSH Tunneling</title>
      <indexterm>
        <primary>OpenSSH</primary>
        <secondary>tunneling</secondary>
      </indexterm>

      <para><application>OpenSSH</application> has the ability to create a tunnel to encapsulate
        another protocol in an encrypted session.</para>

      <para>The following command tells &man.ssh.1; to create a tunnel
         for <application>telnet</application>:</para>

       <screen>&prompt.user; <userinput>ssh -2 -N -f -L <replaceable>5023:localhost:23 user@foo.example.com</replaceable></userinput>
&prompt.user;</screen>

      <para>The <command>ssh</command> command is used with the
	following options:</para>

      <variablelist>
	<varlistentry>
	  <term><option>-2</option></term>

	  <listitem>
	    <para>Forces <command>ssh</command> to use version 2 of
	      the protocol. (Do not use if you are working with older
	      SSH servers)</para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term><option>-N</option></term>

	  <listitem>
	    <para>Indicates no command, or tunnel only.  If omitted,
	      <command>ssh</command> would initiate a normal
	      session.</para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term><option>-f</option></term>

	  <listitem>
	    <para>Forces <command>ssh</command> to run in the
	      background.</para>
	  </listitem>
	</varlistentry>

	<varlistentry>
	  <term><option>-L</option></term>

	  <listitem>
	    <para>Indicates a local tunnel in
	      <replaceable>localport:remotehost:remoteport</replaceable>
	      fashion.</para>
	  </listitem>
	  </varlistentry>

	<varlistentry>
	  <term><option>user@foo.example.com</option></term>

	  <listitem>
	    <para>The remote SSH server.</para>
	  </listitem>
	</varlistentry>
      </variablelist>


      <para>An SSH tunnel works by creating a listen socket on
	<hostid>localhost</hostid> on the specified port.
	It then forwards any connection received
	on the local host/port via the SSH connection to the specified
	remote host and port.</para>

      <para>In the example, port <replaceable>5023</replaceable> on
	<hostid>localhost</hostid> is being forwarded to port
	<replaceable>23</replaceable> on <hostid>localhost</hostid>
	of the remote machine.  Since <replaceable>23</replaceable> is <application>telnet</application>,
	this would create a secure <application>telnet</application> session through an SSH tunnel.</para>

      <para>This can be used to wrap any number of insecure TCP
        protocols such as SMTP, POP3, FTP, etc.</para>

      <example>
	<title>Using SSH to Create a Secure Tunnel for SMTP</title>

        <screen>&prompt.user; <userinput>ssh -2 -N -f -L <replaceable>5025:localhost:25 user@mailserver.example.com</replaceable></userinput>
user@mailserver.example.com's password: <userinput>*****</userinput>
&prompt.user; <userinput>telnet localhost 5025</userinput>
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 mailserver.example.com ESMTP</screen>

        <para>This can be used in conjunction with an
          &man.ssh-keygen.1; and additional user accounts to create a
          more seamless/hassle-free SSH tunneling environment.  Keys
          can be used in place of typing a password, and the tunnels
          can be run as a separate user.</para>
      </example>

      <sect3>
	<title>Practical SSH Tunneling Examples</title>

	<sect4>
	  <title>Secure Access of a POP3 Server</title>

	  <para>At work, there is an SSH server that accepts
	    connections from the outside.  On the same office network
	    resides a mail server running a POP3 server.  The network,
	    or network path between your home and office may or may not
	    be completely trustable.  Because of this, you need to check
	    your e-mail in a secure manner.  The solution is to create
	    an SSH connection to your office's SSH server, and tunnel
	    through to the mail server.</para>

	  <screen>&prompt.user; <userinput>ssh -2 -N -f -L <replaceable>2110:mail.example.com:110 user@ssh-server.example.com</replaceable></userinput>
user@ssh-server.example.com's password: <userinput>******</userinput></screen>

	  <para>When the tunnel is up and running, you can point your
	    mail client to send POP3 requests to <hostid>localhost</hostid>
	    port 2110.  A connection here will be forwarded securely across
	    the tunnel to <hostid>mail.example.com</hostid>.</para>
	</sect4>

	<sect4>
	  <title>Bypassing a Draconian Firewall</title>

	  <para>Some network administrators impose extremely draconian
	    firewall rules, filtering not only incoming connections,
	    but outgoing connections.  You may be only given access
	    to contact remote machines on ports 22 and 80 for SSH
	    and web surfing.</para>

	  <para>You may wish to access another (perhaps non-work
	    related) service, such as an Ogg Vorbis server to stream
	    music.  If this Ogg Vorbis server is streaming on some other
	    port than 22 or 80, you will not be able to access it.</para>

	  <para>The solution is to create an SSH connection to a machine
	    outside of your network's firewall, and use it to tunnel to
	    the Ogg Vorbis server.</para>

	  <screen>&prompt.user; <userinput>ssh -2 -N -f -L <replaceable>8888:music.example.com:8000 user@unfirewalled-system.example.org</replaceable></userinput>
user@unfirewalled-system.example.org's password: <userinput>*******</userinput></screen>

	  <para>Your streaming client can now be pointed to
	    <hostid>localhost</hostid> port 8888, which will be
	    forwarded over to <hostid>music.example.com</hostid> port
	    8000, successfully evading the firewall.</para>
        </sect4>
      </sect3>
    </sect2>

    <sect2>
      <title>The <varname>AllowUsers</varname> Users Option</title>

      <para>It is often a good idea to limit which users can log in and
        from where.  The <literal>AllowUsers</literal> option is a good
        way to accomplish this.  For example, to only allow the
        <username>root</username> user to log in from
        <hostid role="ipaddr">192.168.1.32</hostid>, something like this
        would be appropriate in the
        <filename>/etc/ssh/sshd_config</filename> file:</para>

      <programlisting>AllowUsers root@192.168.1.32</programlisting>

      <para>To allow the user <username>admin</username> to log in from
        anywhere, just list the username by itself:</para>

      <programlisting>AllowUsers admin</programlisting>

      <para>Multiple users should be listed on the same line, like so:</para>

      <programlisting>AllowUsers root@192.168.1.32 admin</programlisting>

      <note>
        <para>It is important that you list each user that needs to
          log in to this machine; otherwise they will be locked out.</para>
      </note>

      <para>After making changes to
         <filename>/etc/ssh/sshd_config</filename> you must tell
         &man.sshd.8; to reload its config files, by running:</para>

      <screen>&prompt.root; <userinput>/etc/rc.d/sshd reload</userinput></screen>
    </sect2>

    <sect2>
      <title>Further Reading</title>
      <para><ulink url="http://www.openssh.com/">OpenSSH</ulink></para>
      <para>&man.ssh.1; &man.scp.1; &man.ssh-keygen.1;
        &man.ssh-agent.1; &man.ssh-add.1; &man.ssh.config.5;</para>
      <para>&man.sshd.8; &man.sftp-server.8; &man.sshd.config.5;</para>
    </sect2>
  </sect1>

  <sect1 id="fs-acl">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title>File System Access Control Lists</title>

    <indexterm>
      <primary>ACL</primary>
    </indexterm>

    <para>In conjunction with file system enhancements like snapshots, FreeBSD 5.0
      and later offers the security of File System Access Control Lists
      (<acronym>ACL</acronym>s).</para>

    <para>Access Control Lists extend the standard &unix;
      permission model in a highly compatible (&posix;.1e) way.  This feature
      permits an administrator to make use of and take advantage of a
      more sophisticated security model.</para>

    <para>To enable <acronym>ACL</acronym> support for <acronym>UFS</acronym>
      file systems, the following:</para>

    <programlisting>options UFS_ACL</programlisting>

    <para>must be compiled into the kernel.  If this option has
      not been compiled in, a warning message will be displayed
      when attempting to mount a file system supporting <acronym>ACL</acronym>s.
      This option is included in the <filename>GENERIC</filename> kernel.
      <acronym>ACL</acronym>s rely on extended attributes being enabled on
      the file system.  Extended attributes are natively supported in the next generation
      &unix; file system, <acronym>UFS2</acronym>.</para>

    <note><para>A higher level of administrative overhead is required to
      configure extended attributes on <acronym>UFS1</acronym> than on
      <acronym>UFS2</acronym>.  The performance of extended attributes
      on <acronym>UFS2</acronym> is also substantially higher.  As a
      result, <acronym>UFS2</acronym> is generally recommended in preference
      to <acronym>UFS1</acronym> for use with access control lists.</para></note>

    <para><acronym>ACL</acronym>s are enabled by the mount-time administrative
      flag, <option>acls</option>, which may be added to <filename>/etc/fstab</filename>.
      The mount-time flag can also be automatically set in a persistent manner using
      &man.tunefs.8; to modify a superblock <acronym>ACL</acronym>s flag in the
      file system header.  In general, it is preferred to use the superblock flag
      for several reasons:</para>

    <itemizedlist>
      <listitem>
	<para>The mount-time <acronym>ACL</acronym>s flag cannot be changed by a
	remount (&man.mount.8; <option>-u</option>), only by means of a complete
	&man.umount.8; and fresh &man.mount.8;.  This means that
	<acronym>ACL</acronym>s cannot be enabled on the root file system after boot.
	It also means that you cannot change the disposition of a file system once
	it is in use.</para>
      </listitem>

      <listitem>
	<para>Setting the superblock flag will cause the file system to always be
	mounted with <acronym>ACL</acronym>s enabled even if there is not an
	<filename>fstab</filename> entry or if the devices re-order.  This prevents
	accidental mounting of the file system without <acronym>ACL</acronym>s
	enabled, which can result in <acronym>ACL</acronym>s being improperly enforced,
	and hence security problems.</para>
      </listitem>
    </itemizedlist>

    <note><para>We may change the <acronym>ACL</acronym>s behavior to allow the flag to
      be enabled without a complete fresh &man.mount.8;, but we consider it desirable to
      discourage accidental mounting without <acronym>ACL</acronym>s enabled, because you
      can shoot your feet quite nastily if you enable <acronym>ACL</acronym>s, then disable
      them, then re-enable them without flushing the extended attributes.  In general, once
      you have enabled <acronym>ACL</acronym>s on a file system, they should not be disabled,
      as the resulting file protections may not be compatible with those intended by the
      users of the system, and re-enabling <acronym>ACL</acronym>s may re-attach the previous
      <acronym>ACL</acronym>s to files that have since had their permissions changed,
      resulting in other unpredictable behavior.</para></note>

    <para>File systems with <acronym>ACL</acronym>s enabled will show a <literal>+</literal>
      (plus) sign in their permission settings when viewed.  For example:</para>

    <programlisting>drwx------  2 robert  robert  512 Dec 27 11:54 private
drwxrwx---+ 2 robert  robert  512 Dec 23 10:57 directory1
drwxrwx---+ 2 robert  robert  512 Dec 22 10:20 directory2
drwxrwx---+ 2 robert  robert  512 Dec 27 11:57 directory3
drwxr-xr-x  2 robert  robert  512 Nov 10 11:54 public_html</programlisting>

    <para>Here we see that the <filename>directory1</filename>,
      <filename>directory2</filename>, and <filename>directory3</filename>
      directories are all taking advantage of <acronym>ACL</acronym>s.  The
      <filename>public_html</filename> directory is not.</para>

    <sect2>
      <title>Making Use of <acronym>ACL</acronym>s</title>

      <para>The file system <acronym>ACL</acronym>s can be viewed by the
	&man.getfacl.1; utility.  For instance, to view the
	<acronym>ACL</acronym> settings on the <filename>test</filename>
	file, one would use the command:</para>

      <screen>&prompt.user; <userinput>getfacl <filename>test</filename></userinput>
	#file:test
	#owner:1001
	#group:1001
	user::rw-
	group::r--
	other::r--</screen>

      <para>To change the <acronym>ACL</acronym> settings on this file,
	invoke the &man.setfacl.1; utility.  Observe:</para>

      <screen>&prompt.user; <userinput>setfacl -k <filename>test</filename></userinput></screen>

      <para>The <option>-k</option> flag will remove all of the
	currently defined <acronym>ACL</acronym>s from a file or file
	system.  The more preferable method would be to use
	<option>-b</option> as it leaves the basic fields required for
	<acronym>ACL</acronym>s to work.</para>

      <screen>&prompt.user; <userinput>setfacl -m u:trhodes:rwx,group:web:r--,o::--- <filename>test</filename></userinput></screen>

      <para>In the aforementioned command, the <option>-m</option>
	option was used to modify the default <acronym>ACL</acronym>
	entries.  Since there were no pre-defined entries, as they were
	removed by the previous command, this will restore the default
	options and assign the options listed.  Take care to notice that
	if you add a user or group which does not exist on the system,
	an <errorname>Invalid argument</errorname> error will be printed
	to <devicename>stdout</devicename>.</para>
    </sect2>
  </sect1>

  <sect1 id="security-portaudit">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title>Monitoring Third Party Security Issues</title>

    <indexterm>
      <primary>Portaudit</primary>
    </indexterm>

    <para>In recent years, the security world has made many improvements
      to how vulnerability assessment is handled.  The threat of system
      intrusion increases as third party utilities are installed and
      configured for virtually any operating system available
      today.</para>

    <para>Vulnerability assessment is a key factor in security, and
      while &os; releases advisories for the base system, doing so
      for every third party utility is beyond the &os; Project's
      capability.  There is a way to mitigate third party
      vulnerabilities and warn administrators of known security
      issues.  A &os; add on utility known as
      <application>Portaudit</application> exists solely for this
      purpose.</para>

    <para>The <filename role="port">ports-mgmt/portaudit</filename> port
      polls a database, updated and maintained by the &os; Security
      Team and ports developers, for known security issues.</para>

    <para>To begin using <application>Portaudit</application>, one
      must install it from the Ports Collection:</para>

    <screen>&prompt.root; <userinput>cd /usr/ports/ports-mgmt/portaudit &amp;&amp; make install clean</userinput></screen>

    <para>During the install process, the configuration files for
      &man.periodic.8; will be updated, permitting
      <application>Portaudit</application> output in the daily security
      runs.  Ensure the daily security run emails, which are sent to
      <username>root</username>'s email account, are being read.  No
      more configuration will be required here.</para>

    <para>After installation, an administrator can update the database
      and view known vulnerabilities in installed packages by invoking
      the following command:</para>

    <screen>&prompt.root; <userinput>portaudit -Fda</userinput></screen>

    <note>
      <para>The database will automatically be updated during the
	&man.periodic.8; run; thus, the previous command is completely
	optional.  It is only required for the following
	examples.</para>
    </note>

    <para>To audit the third party utilities installed as part of
      the Ports Collection at anytime, an administrator need only run
      the following command:</para>

    <screen>&prompt.root; <userinput>portaudit -a</userinput></screen>

    <para><application>Portaudit</application> will produce something
      like this for vulnerable packages:</para>

    <programlisting>Affected package: cups-base-1.1.22.0_1
Type of problem: cups-base -- HPGL buffer overflow vulnerability.
Reference: &lt;http://www.FreeBSD.org/ports/portaudit/40a3bca2-6809-11d9-a9e7-0001020eed82.html&gt;

1 problem(s) in your installed packages found.

You are advised to update or deinstall the affected package(s) immediately.</programlisting>

    <para>By pointing a web browser to the <acronym>URL</acronym> shown,
      an administrator may obtain more information about the
      vulnerability in question.  This will include versions affected,
      by &os; Port version, along with other web sites which may contain
      security advisories.</para>

    <para>In short, <application>Portaudit</application> is a powerful
      utility and extremely useful when coupled with the
      <application>Portupgrade</application> port.</para>
  </sect1>

  <sect1 id="security-advisories">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title>&os; Security Advisories</title>

    <indexterm>
      <primary>FreeBSD Security Advisories</primary>
    </indexterm>

    <para>Like many production quality operating systems, &os; publishes
      <quote>Security Advisories</quote>.  These advisories are usually
      mailed to the security lists and noted in the Errata only
      after the appropriate releases have been patched.  This section
      will work to explain what an advisory is, how to understand it,
      and what measures to take in order to patch a system.</para>

    <sect2>
      <title>What does an advisory look like?</title>

      <para>The &os; security advisories look similar to the one below,
	taken from the &a.security-notifications.name; mailing list.</para>

      <programlisting>=============================================================================
&os;-SA-XX:XX.UTIL                                     Security Advisory
                                                          The &os; Project

Topic:          denial of service due to some problem<co id="co-topic"/>

Category:       core<co id="co-category"/>
Module:         sys<co id="co-module"/>
Announced:      2003-09-23<co id="co-announce"/>
Credits:        Person@EMAIL-ADDRESS<co id="co-credit"/>
Affects:        All releases of &os;<co id="co-affects"/>
                &os; 4-STABLE prior to the correction date
Corrected:      2003-09-23 16:42:59 UTC (RELENG_4, 4.9-PRERELEASE)
                2003-09-23 20:08:42 UTC (RELENG_5_1, 5.1-RELEASE-p6)
                2003-09-23 20:07:06 UTC (RELENG_5_0, 5.0-RELEASE-p15)
                2003-09-23 16:44:58 UTC (RELENG_4_8, 4.8-RELEASE-p8)
                2003-09-23 16:47:34 UTC (RELENG_4_7, 4.7-RELEASE-p18)
                2003-09-23 16:49:46 UTC (RELENG_4_6, 4.6-RELEASE-p21)
                2003-09-23 16:51:24 UTC (RELENG_4_5, 4.5-RELEASE-p33)
                2003-09-23 16:52:45 UTC (RELENG_4_4, 4.4-RELEASE-p43)
                2003-09-23 16:54:39 UTC (RELENG_4_3, 4.3-RELEASE-p39)<co id="co-corrected"/>
<acronym>CVE</acronym> Name:	CVE-XXXX-XXXX<co id="co-cve"/>

For general information regarding FreeBSD Security Advisories,
including descriptions of the fields above, security branches, and the
following sections, please visit
http://www.FreeBSD.org/security/.

I.   Background<co id="co-backround"/>


II.  Problem Description<co id="co-descript"/>


III. Impact<co id="co-impact"/>


IV.  Workaround<co id="co-workaround"/>


V.   Solution<co id="co-solution"/>


VI.  Correction details<co id="co-details"/>


VII. References<co id="co-ref"/></programlisting>


      <calloutlist>
	<callout arearefs="co-topic">
	  <para>The <literal>Topic</literal> field indicates exactly what the problem is.
	    It is basically an introduction to the current security
	    advisory and notes the utility with the
	    vulnerability.</para>
	</callout>

	<callout arearefs="co-category">
	  <para>The <literal>Category</literal> refers to the affected part of the system
	    which may be one of <literal>core</literal>, <literal>contrib</literal>, or <literal>ports</literal>.  The <literal>core</literal>
	    category means that the vulnerability affects a core
	    component of the &os; operating system.  The <literal>contrib</literal>
	    category means that the vulnerability affects software
	    contributed to the &os; Project, such as
	    <application>sendmail</application>.  Finally the <literal>ports</literal>
	    category indicates that the vulnerability affects add on
	    software available as part of the Ports Collection.</para>
	</callout>

	<callout arearefs="co-module">
	  <para>The <literal>Module</literal> field refers to the component location, for
	    instance <literal>sys</literal>.  In this example, we see that the module,
	    <literal>sys</literal>, is affected; therefore, this vulnerability
	    affects a component used within the kernel.</para>
	</callout>

	<callout arearefs="co-announce">
	  <para>The <literal>Announced</literal> field reflects the date said security
	    advisory was published, or announced to the world.  This
	    means that the security team has verified that the problem
	    does exist and that a patch has been committed to the &os;
	    source code repository.</para>
	</callout>

	<callout arearefs="co-credit">
	  <para>The <literal>Credits</literal> field gives credit to the individual or
	    organization who noticed the vulnerability and reported
	    it.</para>
	</callout>

	<callout arearefs="co-affects">
	  <para>The <literal>Affects</literal> field explains which releases of &os; are
	    affected by this vulnerability.  For the kernel, a quick
	    look over the output from <command>ident</command> on the
	    affected files will help in determining the revision.
	    For ports, the version number is listed after the port name
	    in <filename>/var/db/pkg</filename>.  If the system does not
	    sync with the &os; <acronym>CVS</acronym> repository and rebuild
	    daily, chances are that it is affected.</para>
	</callout>

	<callout arearefs="co-corrected">
	  <para>The <literal>Corrected</literal> field indicates the date, time, time
	    offset, and release that was corrected.</para>
	</callout>

	<callout arearefs="co-cve">
	  <para>Reserved for the identification information used to look up
	    vulnerabilities in the Common Vulnerabilities Database system.</para>
	</callout>

	<callout arearefs="co-backround">
	  <para>The <literal>Background</literal> field gives information on exactly what
	    the affected utility is.  Most of the time this is why
	    the utility exists in &os;, what it is used for, and a bit
	    of information on how the utility came to be.</para>
	</callout>

	<callout arearefs="co-descript">
	  <para>The <literal>Problem Description</literal> field explains the security hole
	    in depth.  This can include information on flawed code, or
	    even how the utility could be maliciously used to open
	    a security hole.</para>
	</callout>

	<callout arearefs="co-impact">
	  <para>The <literal>Impact</literal> field describes what type of impact the
	    problem could have on a system.  For example, this could
	    be anything from a denial of service attack, to extra
	    privileges available to users, or even giving the attacker
	    superuser access.</para>
	</callout>

	<callout arearefs="co-workaround">
	  <para>The <literal>Workaround</literal> field offers a feasible workaround to
	    system administrators who may be incapable of upgrading
	    the system.  This may be due to time constraints, network
	    availability, or a slew of other reasons.  Regardless,
	    security should not be taken lightly, and an affected system
	    should either be patched or the security hole workaround
	    should be implemented.</para>
	</callout>

	<callout arearefs="co-solution">
	  <para>The <literal>Solution</literal> field offers instructions on patching the
	    affected system.  This is a step by step tested and verified
	    method for getting a system patched and working
	    securely.</para>
	</callout>

	<callout arearefs="co-details">
	  <para>The <literal>Correction Details</literal> field displays the
	    <acronym>CVS</acronym> branch or release name with the
	    periods changed to underscore characters.  It also shows
	    the revision number of the affected files within each
	    branch.</para>
	</callout>

	<callout arearefs="co-ref">
	  <para>The <literal>References</literal> field usually offers sources of other
	    information.  This can include web <acronym>URL</acronym>s,
	    books, mailing lists, and newsgroups.</para>
	</callout>
      </calloutlist>
    </sect2>
  </sect1>

  <sect1 id="security-accounting">
    <sect1info>
      <authorgroup>
	<author>
	  <firstname>Tom</firstname>
	  <surname>Rhodes</surname>
	  <contrib>Contributed by </contrib>
	</author>
      </authorgroup>
    </sect1info>

    <title>Process Accounting</title>

    <indexterm>
      <primary>Process Accounting</primary>
    </indexterm>

    <para>Process accounting is a security method in which an
      administrator may keep track of system resources used,
      their allocation among users, provide for system monitoring,
      and minimally track a user's commands.</para>

    <para>This indeed has its own positive and negative points.  One of
      the positives is that an intrusion may be narrowed down
      to the point of entry.  A negative is the amount of logs
      generated by process accounting, and the disk space they may
      require.  This section will walk an administrator through
      the basics of process accounting.</para>

    <sect2>
      <title>Enable and Utilizing Process Accounting</title>
      <para>Before making use of process accounting, it
	must be enabled.  To do this, execute the following
	commands:</para>

      <screen>&prompt.root; <userinput>touch <filename>/var/account/acct</filename></userinput>

&prompt.root; <userinput>accton <filename>/var/account/acct</filename></userinput>

&prompt.root; <userinput>echo 'accounting_enable="YES"' &gt;&gt; <filename>/etc/rc.conf</filename></userinput></screen>

      <para>Once enabled, accounting will begin to track
	<acronym>CPU</acronym> stats, commands, etc.  All accounting
	logs are in a non-human readable format and may be viewed
	using the &man.sa.8; utility.  If issued without any options,
	<command>sa</command> will print information relating to the
	number of per user calls, the total elapsed time in minutes,
	total <acronym>CPU</acronym> and user time in minutes, average
	number of I/O operations, etc.</para>

      <para>To view information about commands being issued, one
	would use the &man.lastcomm.1; utility.  The
	<command>lastcomm</command> may be used to print out commands
	issued by users on specific &man.ttys.5;, for example:</para>

      <screen>&prompt.root; <userinput>lastcomm ls
	<username>trhodes</username> ttyp1</userinput></screen>

      <para>Would print out all known usage of the <command>ls</command>
        by <username>trhodes</username> on the ttyp1 terminal.</para>

      <para>Many other useful options exist and are explained in the
	&man.lastcomm.1;, &man.acct.5; and &man.sa.8; manual
	pages.</para>
    </sect2>
  </sect1>
</chapter>