&tm-attrib.freebsd; &tm-attrib.general; $FreeBSD$ $FreeBSD$ These guidelines describe recommended handling practices for FreeBSD Problem Reports (PRs). Whilst developed for the FreeBSD PR Database Maintenance Team freebsd-bugbusters@FreeBSD.org, these guidelines should be followed by anyone working with FreeBSD PRs. Dag-ErlingSmørgrav HitenPandya

Bugzilla is an issue management system used by the &os; Project. As accurate tracking of outstanding software defects is important to FreeBSD's quality, the correct use of the software is essential to the forward progress of the Project. Access to Bugzilla is available to the entire &os; community. In order to maintain consistency within the database and provide a consistent user experience, guidelines have been established covering common aspects of bug management such as presenting followup, handling close requests, and so forth.

The Reporter submits a bug report on the website. The bug is in the Needs Triage state. Jane Random BugBuster confirms that the bug report has sufficient information to be reproducible. If not, she goes back and forth with the reporter to obtain the needed information. At this point the bug is set to the Open state. Joe Random Committer takes interest in the PR and assigns it to himself, or Jane Random BugBuster decides that Joe is best suited to handle it and assigns it to him. The bug should be set to the In Discussion state. Joe has a brief exchange with the originator (making sure it all goes into the audit trail) and determines the cause of the problem. Joe pulls an all-nighter and whips up a patch that he thinks fixes the problem, and submits it in a follow-up, asking the originator to test it. He then sets the PRs state to Patch Ready. A couple of iterations later, both Joe and the originator are satisfied with the patch, and Joe commits it to -CURRENT (or directly to -STABLE if the problem does not exist in -CURRENT), making sure to reference the Problem Report in his commit log (and credit the originator if they submitted all or part of the patch) and, if appropriate, start an MFC countdown. The bug is set to the Needs MFC state. If the patch does not need MFCing, Joe then closes the PR as Issue Resolved. Many PRs are submitted with very little information about the problem, and some are either very complex to solve, or just scratch the surface of a larger problem; in these cases, it is very important to obtain all the necessary information needed to solve the problem. If the problem contained within cannot be solved, or has occurred again, it is necessary to re-open the PR.

It is important to update the state of a PR when certain actions are taken. The state should accurately reflect the current state of work on the PR. When a PR has been worked on and the developer(s) responsible feel comfortable about the fix, they will submit a followup to the PR and change its state to feedback. At this point, the originator should evaluate the fix in their context and respond indicating whether the defect has indeed been remedied. A Problem Report may be in one of the following states: open Initial state; the problem has been pointed out and it needs reviewing. analyzed The problem has been reviewed and a solution is being sought. feedback Further work requires additional information from the originator or the community; possibly information regarding the proposed solution. patched A patch has been committed, but something (MFC, or maybe confirmation from originator) is still pending. suspended The problem is not being worked on, due to lack of information or resources. This is a prime candidate for somebody who is looking for a project to take on. If the problem cannot be solved at all, it will be closed, rather than suspended. The documentation project uses suspended for wish-list items that entail a significant amount of work which no one currently has time for. closed A problem report is closed when any changes have been integrated, documented, and tested, or when fixing the problem is abandoned. The patched state is directly related to feedback, so you may go directly to closed state if the originator cannot test the patch, and it works in your own testing.

While handling problem reports, either as a developer who has direct access to the Problem Reports database or as a contributor who browses the database and submits followups with patches, comments, suggestions or change requests, you will come across several different types of PRs. PRs not yet assigned to anyone. PRs already assigned to someone. Duplicates of existing PRs. Stale PRs Non-Bug PRs The following sections describe what each different type of PRs is used for, when a PR belongs to one of these types, and what treatment each different type receives.

When PRs arrive, they are initially assigned to a generic (placeholder) assignee. These are always prepended with freebsd-. The exact value for this default depends on the category; in most cases, it corresponds to a specific &os; mailing list. Here is the current list, with the most common ones listed first: Type Categories Default Assignee base system bin, conf, gnu, kern, misc freebsd-bugs architecture-specific alpha, amd64, arm, i386, ia64, powerpc, sparc64 freebsd-arch ports collection ports freebsd-ports-bugs documentation shipped with the system docs freebsd-doc &os; web pages (not including docs) Website freebsd-www Type Categories Default Assignee advocacy efforts advocacy freebsd-advocacy &java.virtual.machine; problems java freebsd-java standards compliance standards freebsd-standards threading libraries threads freebsd-threads &man.usb.4; subsystem usb freebsd-usb Do not be surprised to find that the submitter of the PR has assigned it to the wrong category. If you fix the category, do not forget to fix the assignment as well. (In particular, our submitters seem to have a hard time understanding that just because their problem manifested on an i386 system, that it might be generic to all of &os;, and thus be more appropriate for kern. The converse is also true, of course.) Certain PRs may be reassigned away from these generic assignees by anyone. There are several types of assignees: specialized mailing lists; mail aliases (used for certain limited-interest items); and individuals. For assignees which are mailing lists, please use the long form when making the assignment (e.g., freebsd-foo instead of foo); this will avoid duplicate emails sent to the mailing list. Since the list of individuals who have volunteered to be the default assignee for certain types of PRs changes so often, it is much more suitable for the FreeBSD wiki. Here is a sample list of such entities; it is probably not complete. Type Suggested Category Suggested Assignee Assignee Type problem specific to the &arm; architecture arm freebsd-arm mailing list problem specific to the &mips; architecture kern freebsd-mips mailing list problem specific to the &powerpc; architecture kern freebsd-ppc mailing list problem with Advanced Configuration and Power Management (&man.acpi.4;) kern freebsd-acpi mailing list problem with Asynchronous Transfer Mode (ATM) drivers kern freebsd-atm mailing list problem with embedded or small-footprint &os; systems (e.g., NanoBSD/PicoBSD/FreeBSD-arm) kern freebsd-embedded mailing list problem with &firewire; drivers kern freebsd-firewire mailing list problem with the filesystem code kern freebsd-fs mailing list problem with the &man.geom.4; subsystem kern freebsd-geom mailing list problem with the &man.ipfw.4; subsystem kern freebsd-ipfw mailing list problem with Integrated Services Digital Network (ISDN) drivers kern freebsd-isdn mailing list &man.jail.8; subsystem kern freebsd-jail mailing list problem with &linux; or SVR4 emulation kern freebsd-emulation mailing list problem with the networking stack kern freebsd-net mailing list problem with the &man.pf.4; subsystem kern freebsd-pf mailing list problem with the &man.scsi.4; subsystem kern freebsd-scsi mailing list problem with the &man.sound.4; subsystem kern freebsd-multimedia mailing list problems with the &man.wlan.4; subsystem and wireless drivers kern freebsd-wireless mailing list problem with &man.sysinstall.8; or &man.bsdinstall.8; bin freebsd-sysinstall mailing list problem with the system startup scripts (&man.rc.8;) kern freebsd-rc mailing list problem with VIMAGE or VNET functionality and related code kern freebsd-virtualization mailing list problem with Xen emulation kern freebsd-xen mailing list Type Suggested Category Suggested Assignee Assignee Type problem with the ports framework (not with an individual port!) ports portmgr alias port which is maintained by apache@FreeBSD.org ports apache mailing list port which is maintained by autotools@FreeBSD.org ports autotools alias port which is maintained by doceng@FreeBSD.org ports doceng alias port which is maintained by eclipse@FreeBSD.org ports freebsd-eclipse mailing list port which is maintained by gecko@FreeBSD.org ports gecko mailing list port which is maintained by gnome@FreeBSD.org ports gnome mailing list port which is maintained by hamradio@FreeBSD.org ports hamradio alias port which is maintained by haskell@FreeBSD.org ports haskell alias port which is maintained by java@FreeBSD.org ports freebsd-java mailing list port which is maintained by kde@FreeBSD.org ports kde mailing list port which is maintained by mono@FreeBSD.org ports mono mailing list port which is maintained by office@FreeBSD.org ports freebsd-office mailing list port which is maintained by perl@FreeBSD.org ports perl mailing list port which is maintained by python@FreeBSD.org ports freebsd-python mailing list port which is maintained by ruby@FreeBSD.org ports freebsd-ruby mailing list port which is maintained by secteam@FreeBSD.org ports secteam alias port which is maintained by vbox@FreeBSD.org ports vbox alias port which is maintained by x11@FreeBSD.org ports freebsd-x11 mailing list Ports PRs which have a maintainer who is a ports committer may be reassigned by anyone (but note that not every &os; committer is necessarily a ports committer, so you cannot simply go by the email address alone.) For other PRs, please do not reassign them to individuals (other than yourself) unless you are certain that the assignee really wants to track the PR. This will help to avoid the case where no one looks at fixing a particular problem because everyone assumes that the assignee is already working on it. Type Suggested Category Suggested Assignee Assignee Type problem with PR database bin bugmeister alias problem with Bugzilla web form. doc bugmeister alias

If a PR has the responsible field set to the username of a FreeBSD developer, it means that the PR has been handed over to that particular person for further work. Assigned PRs should not be touched by anyone but the assignee or bugmeister. If you have comments, submit a followup. If for some reason you think the PR should change state or be reassigned, send a message to the assignee. If the assignee does not respond within two weeks, unassign the PR and do as you please.

If you find more than one PR that describe the same issue, choose the one that contains the largest amount of useful information and close the others, stating clearly the number of the superseding PR. If several PRs contain non-overlapping useful information, submit all the missing information to one in a followup, including references to the others; then close the other PRs (which are now completely superseded).

A PR is considered stale if it has not been modified in more than six months. Apply the following procedure to deal with stale PRs: If the PR contains sufficient detail, try to reproduce the problem in -CURRENT and -STABLE. If you succeed, submit a followup detailing your findings and try to find someone to assign it to. Set the state to analyzed if appropriate. If the PR describes an issue which you know is the result of a usage error (incorrect configuration or otherwise), submit a followup explaining what the originator did wrong, then close the PR with the reason User error or Configuration error. If the PR describes an error which you know has been corrected in both -CURRENT and -STABLE, close it with a message stating when it was fixed in each branch. If the PR describes an error which you know has been corrected in -CURRENT, but not in -STABLE, try to find out when the person who corrected it is planning to MFC it, or try to find someone else (maybe yourself?) to do it. Set the state to patched and assign it to whomever will do the MFC. In other cases, ask the originator to confirm if the problem still exists in newer versions. If the originator does not reply within a month, close the PR with the notation Feedback timeout.

Developers that come across PRs that look like they should have been posted to &a.bugs.name; or some other list should close the PR, informing the submitter in a comment why this is not really a PR and where the message should be posted. The email addresses that Bugzilla listens to for incoming PRs have been published as part of the FreeBSD documentation, have been announced and listed on the web-site. This means that spammers found them. Whenever you close one of these PRs, please do the following: Set the component to junk (under Supporting Services. Set Responsible to nobody@FreeBSD.org. Set State to Issue Resolved. Setting the category to junk makes it obvious that there is no useful content within the PR, and helps to reduce the clutter within the main categories.

This is a list of resources relevant to the proper writing and processing of problem reports. It is by no means complete. How to Write FreeBSD Problem Reports—guidelines for PR originators.