ardix/arch/at91sam3x8e/SAM3X8E.svd

<?xml version="1.0" encoding="UTF-8"?>

<!-- ============================================================================ -->
<!--        SAM Software Package License                                          -->
<!-- ============================================================================ -->
<!-- Copyright (c) 2012, Atmel Corporation                                        -->
<!--                                                                              -->
<!-- All rights reserved.                                                         -->
<!--                                                                              -->
<!-- Redistribution and use in source and binary forms, with or without           -->
<!-- modification, are permitted provided that the following condition is met:    -->
<!--                                                                              -->
<!-- - Redistributions of source code must retain the above copyright notice,     -->
<!-- this list of conditions and the disclaimer below.                            -->
<!--                                                                              -->
<!-- Atmel's name may not be used to endorse or promote products derived from     -->
<!-- this software without specific prior written permission.                     -->
<!--                                                                              -->
<!-- DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR    -->
<!-- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   -->
<!-- DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      -->
<!-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -->
<!-- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  -->
<!-- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    -->
<!-- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         -->
<!-- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -->
<!-- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           -->
<!-- ============================================================================ -->

<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.0" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_0.xsd">
  <name>SAM3X8E</name>
  <version>0</version>
  <description>Atmel SAM3X8E Microcontroller</description>
  <addressUnitBits>8</addressUnitBits>
  <width>32</width>
  <peripherals>
    <peripheral>
      <name>HSMCI</name>
      <version>6449H</version>
      <description>High Speed MultiMedia Card Interface</description>
      <prependToName>HSMCI_</prependToName>
      <baseAddress>0x40000000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_HSMCI</name>
        <value>21</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MCIEN</name>
              <description>Multi-Media Interface Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCIDIS</name>
              <description>Multi-Media Interface Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWSEN</name>
              <description>Power Save Mode Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWSDIS</name>
              <description>Power Save Mode Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PWSDIV</name>
              <description>Power Saving Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RDPROOF</name>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRPROOF</name>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FBYTE</name>
              <description>Force Byte Transfer</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PADV</name>
              <description>Padding Value</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTOR</name>
          <description>Data Timeout Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTOCYC</name>
              <description>Data Timeout Cycle Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTOMUL</name>
              <description>Data Timeout Multiplier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>DTOCYC</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16</name>
                  <description>DTOCYC x 16</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128</name>
                  <description>DTOCYC x 128</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256</name>
                  <description>DTOCYC x 256</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024</name>
                  <description>DTOCYC x 1024</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096</name>
                  <description>DTOCYC x 4096</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65536</name>
                  <description>DTOCYC x 65536</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1048576</name>
                  <description>DTOCYC x 1048576</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SDCR</name>
          <description>SD/SDIO Card Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SDCSEL</name>
              <description>SDCard/SDIO Slot</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOTA</name>
                  <description>Slot A is selected.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTB</name>
                  <description>SDCARD/SDIO Slot B selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTC</name>
                  <description>-</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTD</name>
                  <description>-</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SDCBUS</name>
              <description>SDCard/SDIO Bus Width</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>1 bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4</name>
                  <description>4 bit</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8</name>
                  <description>8 bit</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ARGR</name>
          <description>Argument Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ARG</name>
              <description>Command Argument</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMDR</name>
          <description>Command Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDNB</name>
              <description>Command Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSPTYP</name>
              <description>Response Type</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORESP</name>
                  <description>No response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>48_BIT</name>
                  <description>48-bit response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>136_BIT</name>
                  <description>136-bit response.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>R1B</name>
                  <description>R1b response type</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SPCMD</name>
              <description>Special Command</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>STD</name>
                  <description>Not a special CMD.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INIT</name>
                  <description>Initialization CMD: 74 clock cycles for initialization sequence.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SYNC</name>
                  <description>Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CE_ATA</name>
                  <description>CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IT_CMD</name>
                  <description>Interrupt command: Corresponds to the Interrupt Mode (CMD40).</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IT_RESP</name>
                  <description>Interrupt response: Corresponds to the Interrupt Mode (CMD40).</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BOR</name>
                  <description>Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly.</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EBO</name>
                  <description>End Boot Operation. This command allows the host processor to terminate the boot operation mode.</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OPDCMD</name>
              <description>Open Drain Command</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUSHPULL</name>
                  <description>Push pull command.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OPENDRAIN</name>
                  <description>Open drain command.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MAXLAT</name>
              <description>Max Latency for Command to Response</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5</name>
                  <description>5-cycle max latency.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64</name>
                  <description>64-cycle max latency.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRCMD</name>
              <description>Transfer Command</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_DATA</name>
                  <description>No data transfer</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>START_DATA</name>
                  <description>Start data transfer</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>STOP_DATA</name>
                  <description>Stop data transfer</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRDIR</name>
              <description>Transfer Direction</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>WRITE</name>
                  <description>Write.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READ</name>
                  <description>Read.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRTYP</name>
              <description>Transfer Type</description>
              <bitOffset>19</bitOffset>
              <bitWidth>3</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SINGLE</name>
                  <description>MMC/SDCard Single Block</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIPLE</name>
                  <description>MMC/SDCard Multiple Block</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>STREAM</name>
                  <description>MMC Stream</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>SDIO Byte</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BLOCK</name>
                  <description>SDIO Block</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IOSPCMD</name>
              <description>SDIO Special Command</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>STD</name>
                  <description>Not an SDIO Special Command</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUSPEND</name>
                  <description>SDIO Suspend Command</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RESUME</name>
                  <description>SDIO Resume Command</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ATACS</name>
              <description>ATA with Command Completion Signal</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal operation mode.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>COMPLETION</name>
                  <description>This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR).</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BOOT_ACK</name>
              <description>Boot Operation Acknowledge.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BLKR</name>
          <description>Block Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BCNT</name>
              <description>MMC/SDIO Block Count - SDIO Byte Count</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MULTIPLE</name>
                  <description>MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BLOCK</name>
                  <description>SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BLKLEN</name>
              <description>Data Block Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSTOR</name>
          <description>Completion Signal Timeout Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CSTOCYC</name>
              <description>Completion Signal Timeout Cycle Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSTOMUL</name>
              <description>Completion Signal Timeout Multiplier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>CSTOCYC x 1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16</name>
                  <description>CSTOCYC x 16</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128</name>
                  <description>CSTOCYC x 128</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256</name>
                  <description>CSTOCYC x 256</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024</name>
                  <description>CSTOCYC x 1024</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096</name>
                  <description>CSTOCYC x 4096</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65536</name>
                  <description>CSTOCYC x 65536</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1048576</name>
                  <description>CSTOCYC x 1048576</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>RSPR%s</name>
          <description>Response Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RSP</name>
              <description>Response</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RDR</name>
          <description>Receive Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Read</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Transmit Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Write</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000C0E5</resetValue>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>HSMCI Not Busy</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotA</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotB</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>CE-ATA Completion Signal Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time-out Error</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer done</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty flag</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done flag</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Operation Acknowledge Received</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Operation Acknowledge Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotA</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotB</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Timeout Error Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer completed Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty Interrupt enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Acknowledge Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Acknowledge Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotA</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotB</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal received interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time out Error Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer completed Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Acknowledge Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Acknowledge Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotA</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQforSlotB</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time-out Error Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer Completed Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO Empty Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Operation Acknowledge Received Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Operation Acknowledge Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA</name>
          <description>DMA Configuration Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OFFSET</name>
              <description>DMA Write Buffer Offset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKSIZE</name>
              <description>DMA Channel Read and Write Chunk Size</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>1 data available</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4</name>
                  <description>4 data available</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DMAEN</name>
              <description>DMA Hardware Handshaking Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ROPT</name>
              <description>Read Optimization with padding</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG</name>
          <description>Configuration Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFOMODE</name>
              <description>HSMCI Internal FIFO control mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FERRCTRL</name>
              <description>Flow Error flag reset control mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSMODE</name>
              <description>High Speed Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LSYNC</name>
              <description>Synchronize on the last block</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protection Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>WP_EN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WP_KEY</name>
              <description>Write Protection Key password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>WP_VS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No Write Protection Violation occurred since the last read of this register (WP_SR)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WRITE</name>
                  <description>Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RESET</name>
                  <description>Software reset had been performed while Write Protection was enabled (since the last read).</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BOTH</name>
                  <description>Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WP_VSRC</name>
              <description>Write Protection Violation SouRCe</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>256</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-255</dimIndex>
          <name>FIFO%s</name>
          <description>FIFO Memory Aperture0</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Read or Data to Write</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SSC</name>
      <version>6078J</version>
      <description>Synchronous Serial Controller</description>
      <prependToName>SSC_</prependToName>
      <baseAddress>0x40004000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_SSC</name>
        <value>26</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXEN</name>
              <description>Receive Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receive Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmit Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmit Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR</name>
          <description>Clock Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCMR</name>
          <description>Receive Clock Mode Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CKS</name>
              <description>Receive Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Divided Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TK</name>
                  <description>TK Clock signal</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RK</name>
                  <description>RK pin</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKO</name>
              <description>Receive Clock Output Mode Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Receive Clock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Receive Clock only during data transfers</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKI</name>
              <description>Receive Clock Inversion</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKG</name>
              <description>Receive Clock Gating Selection</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Receive Clock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Receive Clock only during data transfers</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>START</name>
              <description>Receive Start Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSMIT</name>
                  <description>Transmit start</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LOW</name>
                  <description>Detection of a low level on RF signal</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_HIGH</name>
                  <description>Detection of a high level on RF signal</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_FALLING</name>
                  <description>Detection of a falling edge on RF signal</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_RISING</name>
                  <description>Detection of a rising edge on RF signal</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LEVEL</name>
                  <description>Detection of any level change on RF signal</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_EDGE</name>
                  <description>Detection of any edge on RF signal</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CMP_0</name>
                  <description>Compare 0</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOP</name>
              <description>Receive Stop Selection</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STTDLY</name>
              <description>Receive Start Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PERIOD</name>
              <description>Receive Period Divider Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RFMR</name>
          <description>Receive Frame Mode Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATLEN</name>
              <description>Data Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LOOP</name>
              <description>Loop Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MSBF</name>
              <description>Most Significant Bit First</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATNB</name>
              <description>Data Number per Frame</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSLEN</name>
              <description>Receive Frame Sync Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSOS</name>
              <description>Receive Frame Sync Output Selection</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Pulse</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Pulse</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>Driven Low during data transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>Driven High during data transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLING</name>
                  <description>Toggling at each start of data transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSEDGE</name>
              <description>Frame Sync Edge Detection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Edge Detection</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Edge Detection</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSLEN_EXT</name>
              <description>FSLEN Field Extension</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCMR</name>
          <description>Transmit Clock Mode Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CKS</name>
              <description>Transmit Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Divided Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TK</name>
                  <description>TK Clock signal</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RK</name>
                  <description>RK pin</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKO</name>
              <description>Transmit Clock Output Mode Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Receive Clock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Transmit Clock only during data transfers</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKI</name>
              <description>Transmit Clock Inversion</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKG</name>
              <description>Transmit Clock Gating Selection</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Transmit Clock enabled only if TF Low</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Transmit Clock enabled only if TF High</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>START</name>
              <description>Transmit Start Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RECEIVE</name>
                  <description>Receive start</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LOW</name>
                  <description>Detection of a low level on TF signal</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_HIGH</name>
                  <description>Detection of a high level on TF signal</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_FALLING</name>
                  <description>Detection of a falling edge on TF signal</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_RISING</name>
                  <description>Detection of a rising edge on TF signal</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LEVEL</name>
                  <description>Detection of any level change on TF signal</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_EDGE</name>
                  <description>Detection of any edge on TF signal</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CMP_0</name>
                  <description>Compare 0</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STTDLY</name>
              <description>Transmit Start Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PERIOD</name>
              <description>Transmit Period Divider Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TFMR</name>
          <description>Transmit Frame Mode Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATLEN</name>
              <description>Data Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATDEF</name>
              <description>Data Default Value</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MSBF</name>
              <description>Most Significant Bit First</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATNB</name>
              <description>Data Number per frame</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSLEN</name>
              <description>Transmit Frame Sync Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSOS</name>
              <description>Transmit Frame Sync Output Selection</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Pulse</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Pulse</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>Driven Low during data transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>Driven High during data transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLING</name>
                  <description>Toggling at each start of data transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSDEN</name>
              <description>Frame Sync Data Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSEDGE</name>
              <description>Frame Sync Edge Detection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Edge Detection</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Edge Detection</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSLEN_EXT</name>
              <description>FSLEN Field Extension</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDAT</name>
              <description>Receive Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TDAT</name>
              <description>Transmit Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RSHR</name>
          <description>Receive Sync. Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RSDAT</name>
              <description>Receive Synchronization Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TSHR</name>
          <description>Transmit Sync. Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSDAT</name>
              <description>Transmit Synchronization Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0R</name>
          <description>Receive Compare 0 Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CP0</name>
              <description>Receive Compare Data 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1R</name>
          <description>Receive Compare 1 Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CP1</name>
              <description>Receive Compare Data 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x000000CC</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Transmit Sync</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Receive Sync</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmit Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receive Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPI0</name>
      <version>6088R</version>
      <description>Serial Peripheral Interface 0</description>
      <groupName>SPI</groupName>
      <prependToName>SPI0_</prependToName>
      <baseAddress>0x40008000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_SPI0</name>
        <value>24</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SPIEN</name>
              <description>SPI Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SPIDIS</name>
              <description>SPI Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>SPI Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MSTR</name>
              <description>Master/Slave Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Peripheral Select</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCSDEC</name>
              <description>Chip Select Decode</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODFDIS</name>
              <description>Mode Fault Detection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRBT</name>
              <description>Wait Data Read Before Transfer</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LLB</name>
              <description>Local Loopback Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCS</name>
              <description>Delay Between Chip Selects</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RDR</name>
          <description>Receive Data Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RD</name>
              <description>Receive Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Transmit Data Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TD</name>
              <description>Transmit Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x000000F0</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>Transmit Data Register Empty</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDES</name>
              <description>Underrun Error Status (Slave Mode Only)</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPIENS</name>
              <description>SPI Enable Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDES</name>
              <description>Underrun Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDES</name>
              <description>Underrun Error Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDES</name>
              <description>Underrun Error Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>CSR%s</name>
          <description>Chip Select Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CPOL</name>
              <description>Clock Polarity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCPHA</name>
              <description>Clock Phase</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSNAAT</name>
              <description>Chip Select Not Active After Transfer (Ignored if CSAAT = 1)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSAAT</name>
              <description>Chip Select Not Active After Transfer (Ignored if CSAAT = 1)</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BITS</name>
              <description>Bits Per Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>8 bits for transfer</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>9_BIT</name>
                  <description>9 bits for transfer</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>10_BIT</name>
                  <description>10 bits for transfer</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>11_BIT</name>
                  <description>11 bits for transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12_BIT</name>
                  <description>12 bits for transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>13_BIT</name>
                  <description>13 bits for transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>14_BIT</name>
                  <description>14 bits for transfer</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>15_BIT</name>
                  <description>15 bits for transfer</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16_BIT</name>
                  <description>16 bits for transfer</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SCBR</name>
              <description>Serial Clock Baud Rate</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBS</name>
              <description>Delay Before SPCK</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCT</name>
              <description>Delay Between Consecutive Transfers</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protection Control Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protection Key Password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TC0</name>
      <version>6082O</version>
      <description>Timer Counter 0</description>
      <groupName>TC</groupName>
      <prependToName>TC0_</prependToName>
      <baseAddress>0x40080000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TC0</name>
        <value>27</value>
      </interrupt>
      <interrupt>
        <name>ID_TC1</name>
        <value>28</value>
      </interrupt>
      <interrupt>
        <name>ID_TC2</name>
        <value>29</value>
      </interrupt>
      <registers>
        <register>
          <name>CCR0</name>
          <description>Channel Control Register (channel = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>Channel Mode Register (channel = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 0)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR0</name>
          <description>Stepper Motor Mode Register (channel = 0)</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV0</name>
          <description>Counter Value (channel = 0)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA0</name>
          <description>Register A (channel = 0)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB0</name>
          <description>Register B (channel = 0)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0</name>
          <description>Register C (channel = 0)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR0</name>
          <description>Status Register (channel = 0)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER0</name>
          <description>Interrupt Enable Register (channel = 0)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR0</name>
          <description>Interrupt Disable Register (channel = 0)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR0</name>
          <description>Interrupt Mask Register (channel = 0)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR1</name>
          <description>Channel Control Register (channel = 1)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR1</name>
          <description>Stepper Motor Mode Register (channel = 1)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV1</name>
          <description>Counter Value (channel = 1)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA1</name>
          <description>Register A (channel = 1)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB1</name>
          <description>Register B (channel = 1)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1</name>
          <description>Register C (channel = 1)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR1</name>
          <description>Status Register (channel = 1)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>Interrupt Enable Register (channel = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>Interrupt Disable Register (channel = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>Interrupt Mask Register (channel = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR2</name>
          <description>Channel Control Register (channel = 2)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>Channel Mode Register (channel = 2)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 2)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR2</name>
          <description>Stepper Motor Mode Register (channel = 2)</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV2</name>
          <description>Counter Value (channel = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA2</name>
          <description>Register A (channel = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB2</name>
          <description>Register B (channel = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC2</name>
          <description>Register C (channel = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR2</name>
          <description>Status Register (channel = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>Interrupt Enable Register (channel = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>Interrupt Disable Register (channel = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>Interrupt Mask Register (channel = 2)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BCR</name>
          <description>Block Control Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYNC</name>
              <description>Synchro Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BMR</name>
          <description>Block Mode Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TC0XC0S</name>
              <description>External Clock Signal 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK0</name>
                  <description>Signal connected to XC0: TCLK0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC0: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC0: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC1XC1S</name>
              <description>External Clock Signal 1 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK1</name>
                  <description>Signal connected to XC1: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA0</name>
                  <description>Signal connected to XC1: TIOA0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC1: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC2XC2S</name>
              <description>External Clock Signal 2 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK2</name>
                  <description>Signal connected to XC2: TCLK2</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC2: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC2: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>QDEN</name>
              <description>Quadrature Decoder ENabled</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>POSEN</name>
              <description>POSition ENabled</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPEEDEN</name>
              <description>SPEED ENabled</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>QDTRANS</name>
              <description>Quadrature Decoding TRANSparent</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EDGPHA</name>
              <description>EDGe on PHA count mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVA</name>
              <description>INVerted phA</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVB</name>
              <description>INVerted phB</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVIDX</name>
              <description>INVerted InDeX</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SWAP</name>
              <description>SWAP PHA and PHB</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IDXPHB</name>
              <description>InDeX pin is PHB pin</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAXFILT</name>
              <description>MAXimum FILTer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIER</name>
          <description>QDEC Interrupt Enable Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIDR</name>
          <description>QDEC Interrupt Disable Register</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIMR</name>
          <description>QDEC Interrupt Mask Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QISR</name>
          <description>QDEC Interrupt Status Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIR</name>
              <description>Direction</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FMR</name>
          <description>Fault Mode Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENCF0</name>
              <description>ENable Compare Fault Channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ENCF1</name>
              <description>ENable Compare Fault Channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TC1</name>
      <version>6082O</version>
      <description>Timer Counter 1</description>
      <groupName>TC</groupName>
      <prependToName>TC1_</prependToName>
      <baseAddress>0x40084000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TC3</name>
        <value>30</value>
      </interrupt>
      <interrupt>
        <name>ID_TC4</name>
        <value>31</value>
      </interrupt>
      <interrupt>
        <name>ID_TC5</name>
        <value>32</value>
      </interrupt>
      <registers>
        <register>
          <name>CCR0</name>
          <description>Channel Control Register (channel = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>Channel Mode Register (channel = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 0)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR0</name>
          <description>Stepper Motor Mode Register (channel = 0)</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV0</name>
          <description>Counter Value (channel = 0)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA0</name>
          <description>Register A (channel = 0)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB0</name>
          <description>Register B (channel = 0)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0</name>
          <description>Register C (channel = 0)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR0</name>
          <description>Status Register (channel = 0)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER0</name>
          <description>Interrupt Enable Register (channel = 0)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR0</name>
          <description>Interrupt Disable Register (channel = 0)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR0</name>
          <description>Interrupt Mask Register (channel = 0)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR1</name>
          <description>Channel Control Register (channel = 1)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR1</name>
          <description>Stepper Motor Mode Register (channel = 1)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV1</name>
          <description>Counter Value (channel = 1)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA1</name>
          <description>Register A (channel = 1)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB1</name>
          <description>Register B (channel = 1)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1</name>
          <description>Register C (channel = 1)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR1</name>
          <description>Status Register (channel = 1)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>Interrupt Enable Register (channel = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>Interrupt Disable Register (channel = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>Interrupt Mask Register (channel = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR2</name>
          <description>Channel Control Register (channel = 2)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>Channel Mode Register (channel = 2)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 2)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR2</name>
          <description>Stepper Motor Mode Register (channel = 2)</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV2</name>
          <description>Counter Value (channel = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA2</name>
          <description>Register A (channel = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB2</name>
          <description>Register B (channel = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC2</name>
          <description>Register C (channel = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR2</name>
          <description>Status Register (channel = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>Interrupt Enable Register (channel = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>Interrupt Disable Register (channel = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>Interrupt Mask Register (channel = 2)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BCR</name>
          <description>Block Control Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYNC</name>
              <description>Synchro Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BMR</name>
          <description>Block Mode Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TC0XC0S</name>
              <description>External Clock Signal 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK0</name>
                  <description>Signal connected to XC0: TCLK0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC0: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC0: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC1XC1S</name>
              <description>External Clock Signal 1 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK1</name>
                  <description>Signal connected to XC1: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA0</name>
                  <description>Signal connected to XC1: TIOA0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC1: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC2XC2S</name>
              <description>External Clock Signal 2 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK2</name>
                  <description>Signal connected to XC2: TCLK2</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC2: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC2: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>QDEN</name>
              <description>Quadrature Decoder ENabled</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>POSEN</name>
              <description>POSition ENabled</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPEEDEN</name>
              <description>SPEED ENabled</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>QDTRANS</name>
              <description>Quadrature Decoding TRANSparent</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EDGPHA</name>
              <description>EDGe on PHA count mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVA</name>
              <description>INVerted phA</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVB</name>
              <description>INVerted phB</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVIDX</name>
              <description>INVerted InDeX</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SWAP</name>
              <description>SWAP PHA and PHB</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IDXPHB</name>
              <description>InDeX pin is PHB pin</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAXFILT</name>
              <description>MAXimum FILTer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIER</name>
          <description>QDEC Interrupt Enable Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIDR</name>
          <description>QDEC Interrupt Disable Register</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIMR</name>
          <description>QDEC Interrupt Mask Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QISR</name>
          <description>QDEC Interrupt Status Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIR</name>
              <description>Direction</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FMR</name>
          <description>Fault Mode Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENCF0</name>
              <description>ENable Compare Fault Channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ENCF1</name>
              <description>ENable Compare Fault Channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TC2</name>
      <version>6082O</version>
      <description>Timer Counter 2</description>
      <groupName>TC</groupName>
      <prependToName>TC2_</prependToName>
      <baseAddress>0x40088000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TC6</name>
        <value>33</value>
      </interrupt>
      <interrupt>
        <name>ID_TC7</name>
        <value>34</value>
      </interrupt>
      <interrupt>
        <name>ID_TC8</name>
        <value>35</value>
      </interrupt>
      <registers>
        <register>
          <name>CCR0</name>
          <description>Channel Control Register (channel = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>Channel Mode Register (channel = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 0)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR0</name>
          <description>Stepper Motor Mode Register (channel = 0)</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV0</name>
          <description>Counter Value (channel = 0)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA0</name>
          <description>Register A (channel = 0)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB0</name>
          <description>Register B (channel = 0)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0</name>
          <description>Register C (channel = 0)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR0</name>
          <description>Status Register (channel = 0)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER0</name>
          <description>Interrupt Enable Register (channel = 0)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR0</name>
          <description>Interrupt Disable Register (channel = 0)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR0</name>
          <description>Interrupt Mask Register (channel = 0)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR1</name>
          <description>Channel Control Register (channel = 1)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR1</name>
          <description>Stepper Motor Mode Register (channel = 1)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV1</name>
          <description>Counter Value (channel = 1)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA1</name>
          <description>Register A (channel = 1)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB1</name>
          <description>Register B (channel = 1)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1</name>
          <description>Register C (channel = 1)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR1</name>
          <description>Status Register (channel = 1)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>Interrupt Enable Register (channel = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>Interrupt Disable Register (channel = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>Interrupt Mask Register (channel = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR2</name>
          <description>Channel Control Register (channel = 2)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>Channel Mode Register (channel = 2)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 2)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR2</name>
          <description>Stepper Motor Mode Register (channel = 2)</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN</name>
              <description>Gray Count Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN</name>
              <description>DOWN Count</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV2</name>
          <description>Counter Value (channel = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA2</name>
          <description>Register A (channel = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB2</name>
          <description>Register B (channel = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC2</name>
          <description>Register C (channel = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR2</name>
          <description>Status Register (channel = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>Interrupt Enable Register (channel = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>Interrupt Disable Register (channel = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>Interrupt Mask Register (channel = 2)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BCR</name>
          <description>Block Control Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYNC</name>
              <description>Synchro Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BMR</name>
          <description>Block Mode Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TC0XC0S</name>
              <description>External Clock Signal 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK0</name>
                  <description>Signal connected to XC0: TCLK0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC0: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC0: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC1XC1S</name>
              <description>External Clock Signal 1 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK1</name>
                  <description>Signal connected to XC1: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA0</name>
                  <description>Signal connected to XC1: TIOA0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC1: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC2XC2S</name>
              <description>External Clock Signal 2 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK2</name>
                  <description>Signal connected to XC2: TCLK2</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC2: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC2: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>QDEN</name>
              <description>Quadrature Decoder ENabled</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>POSEN</name>
              <description>POSition ENabled</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPEEDEN</name>
              <description>SPEED ENabled</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>QDTRANS</name>
              <description>Quadrature Decoding TRANSparent</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EDGPHA</name>
              <description>EDGe on PHA count mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVA</name>
              <description>INVerted phA</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVB</name>
              <description>INVerted phB</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVIDX</name>
              <description>INVerted InDeX</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SWAP</name>
              <description>SWAP PHA and PHB</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IDXPHB</name>
              <description>InDeX pin is PHB pin</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAXFILT</name>
              <description>MAXimum FILTer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIER</name>
          <description>QDEC Interrupt Enable Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIDR</name>
          <description>QDEC Interrupt Disable Register</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QIMR</name>
          <description>QDEC Interrupt Mask Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>QISR</name>
          <description>QDEC Interrupt Status Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDX</name>
              <description>InDeX</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIRCHG</name>
              <description>DIRection CHanGe</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>QERR</name>
              <description>Quadrature ERRor</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIR</name>
              <description>Direction</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FMR</name>
          <description>Fault Mode Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENCF0</name>
              <description>ENable Compare Fault Channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ENCF1</name>
              <description>ENable Compare Fault Channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWI0</name>
      <version>6212L</version>
      <description>Two-wire Interface 0</description>
      <groupName>TWI</groupName>
      <prependToName>TWI0_</prependToName>
      <baseAddress>0x4008C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TWI0</name>
        <value>22</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>START</name>
              <description>Send a START Condition</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOP</name>
              <description>Send a STOP Condition</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSEN</name>
              <description>TWI Master Mode Enabled</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSDIS</name>
              <description>TWI Master Mode Disabled</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVEN</name>
              <description>TWI Slave Mode Enabled</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVDIS</name>
              <description>TWI Slave Mode Disabled</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QUICK</name>
              <description>SMBUS Quick Command</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR</name>
          <description>Master Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADRSZ</name>
              <description>Internal Device Address Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No internal device address</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BYTE</name>
                  <description>One-byte internal device address</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BYTE</name>
                  <description>Two-byte internal device address</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BYTE</name>
                  <description>Three-byte internal device address</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MREAD</name>
              <description>Master Read Direction</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DADR</name>
              <description>Device Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMR</name>
          <description>Slave Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADR</name>
              <description>Slave Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IADR</name>
          <description>Internal Address Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADR</name>
              <description>Internal Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWGR</name>
          <description>Clock Waveform Generator Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLDIV</name>
              <description>Clock Low Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHDIV</name>
              <description>Clock High Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000F009</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed (automatically set / reset)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready (automatically set / reset)</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready (automatically set / reset)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVREAD</name>
              <description>Slave Read (automatically set / reset)</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access (automatically set / reset)</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access (clear on read)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error (clear on read)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledged (clear on read)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost (clear on read)</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCLWS</name>
              <description>Clock Wait State (automatically set / reset)</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access (clear on read)</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of RX buffer</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of TX buffer</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>RX Buffer Full</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>TX Buffer Empty</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXDATA</name>
              <description>Master or Slave Receive Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXDATA</name>
              <description>Master or Slave Transmit Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWI1</name>
      <version>6212L</version>
      <description>Two-wire Interface 1</description>
      <groupName>TWI</groupName>
      <prependToName>TWI1_</prependToName>
      <baseAddress>0x40090000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TWI1</name>
        <value>23</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>START</name>
              <description>Send a START Condition</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOP</name>
              <description>Send a STOP Condition</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSEN</name>
              <description>TWI Master Mode Enabled</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSDIS</name>
              <description>TWI Master Mode Disabled</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVEN</name>
              <description>TWI Slave Mode Enabled</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVDIS</name>
              <description>TWI Slave Mode Disabled</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QUICK</name>
              <description>SMBUS Quick Command</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR</name>
          <description>Master Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADRSZ</name>
              <description>Internal Device Address Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No internal device address</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BYTE</name>
                  <description>One-byte internal device address</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BYTE</name>
                  <description>Two-byte internal device address</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BYTE</name>
                  <description>Three-byte internal device address</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MREAD</name>
              <description>Master Read Direction</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DADR</name>
              <description>Device Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMR</name>
          <description>Slave Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADR</name>
              <description>Slave Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IADR</name>
          <description>Internal Address Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADR</name>
              <description>Internal Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWGR</name>
          <description>Clock Waveform Generator Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLDIV</name>
              <description>Clock Low Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHDIV</name>
              <description>Clock High Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000F009</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed (automatically set / reset)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready (automatically set / reset)</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready (automatically set / reset)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVREAD</name>
              <description>Slave Read (automatically set / reset)</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access (automatically set / reset)</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access (clear on read)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error (clear on read)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledged (clear on read)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost (clear on read)</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCLWS</name>
              <description>Clock Wait State (automatically set / reset)</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access (clear on read)</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of RX buffer</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of TX buffer</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>RX Buffer Full</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>TX Buffer Empty</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXDATA</name>
              <description>Master or Slave Receive Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXDATA</name>
              <description>Master or Slave Transmit Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PWM</name>
      <version>6343H</version>
      <description>Pulse Width Modulation Controller</description>
      <prependToName>PWM_</prependToName>
      <baseAddress>0x40094000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PWM</name>
        <value>36</value>
      </interrupt>
      <registers>
        <register>
          <name>CLK</name>
          <description>PWM Clock Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIVA</name>
              <description>CLKA, CLKB Divide Factor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PREA</name>
              <description>CLKA, CLKB Source Clock Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIVB</name>
              <description>CLKA, CLKB Divide Factor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PREB</name>
              <description>CLKA, CLKB Source Clock Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ENA</name>
          <description>PWM Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Channel ID</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Channel ID</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Channel ID</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Channel ID</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIS</name>
          <description>PWM Disable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Channel ID</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Channel ID</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Channel ID</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Channel ID</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>PWM Status Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Channel ID</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Channel ID</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Channel ID</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Channel ID</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>PWM Interrupt Enable Register 1</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Counter Event on Channel 0 Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Counter Event on Channel 1 Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Counter Event on Channel 2 Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Counter Event on Channel 3 Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Counter Event on Channel 4 Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Counter Event on Channel 5 Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Counter Event on Channel 6 Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Counter Event on Channel 7 Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID0</name>
              <description>Fault Protection Trigger on Channel 0 Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID1</name>
              <description>Fault Protection Trigger on Channel 1 Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID2</name>
              <description>Fault Protection Trigger on Channel 2 Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID3</name>
              <description>Fault Protection Trigger on Channel 3 Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID4</name>
              <description>Fault Protection Trigger on Channel 4 Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID5</name>
              <description>Fault Protection Trigger on Channel 5 Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID6</name>
              <description>Fault Protection Trigger on Channel 6 Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID7</name>
              <description>Fault Protection Trigger on Channel 7 Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>PWM Interrupt Disable Register 1</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Counter Event on Channel 0 Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Counter Event on Channel 1 Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Counter Event on Channel 2 Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Counter Event on Channel 3 Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Counter Event on Channel 4 Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Counter Event on Channel 5 Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Counter Event on Channel 6 Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Counter Event on Channel 7 Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID0</name>
              <description>Fault Protection Trigger on Channel 0 Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID1</name>
              <description>Fault Protection Trigger on Channel 1 Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID2</name>
              <description>Fault Protection Trigger on Channel 2 Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID3</name>
              <description>Fault Protection Trigger on Channel 3 Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID4</name>
              <description>Fault Protection Trigger on Channel 4 Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID5</name>
              <description>Fault Protection Trigger on Channel 5 Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID6</name>
              <description>Fault Protection Trigger on Channel 6 Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCHID7</name>
              <description>Fault Protection Trigger on Channel 7 Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>PWM Interrupt Mask Register 1</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Counter Event on Channel 0 Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Counter Event on Channel 1 Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Counter Event on Channel 2 Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Counter Event on Channel 3 Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Counter Event on Channel 4 Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Counter Event on Channel 5 Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Counter Event on Channel 6 Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Counter Event on Channel 7 Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID0</name>
              <description>Fault Protection Trigger on Channel 0 Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID1</name>
              <description>Fault Protection Trigger on Channel 1 Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID2</name>
              <description>Fault Protection Trigger on Channel 2 Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID3</name>
              <description>Fault Protection Trigger on Channel 3 Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID4</name>
              <description>Fault Protection Trigger on Channel 4 Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID5</name>
              <description>Fault Protection Trigger on Channel 5 Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID6</name>
              <description>Fault Protection Trigger on Channel 6 Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID7</name>
              <description>Fault Protection Trigger on Channel 7 Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR1</name>
          <description>PWM Interrupt Status Register 1</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Counter Event on Channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Counter Event on Channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Counter Event on Channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Counter Event on Channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID4</name>
              <description>Counter Event on Channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID5</name>
              <description>Counter Event on Channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID6</name>
              <description>Counter Event on Channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID7</name>
              <description>Counter Event on Channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID0</name>
              <description>Fault Protection Trigger on Channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID1</name>
              <description>Fault Protection Trigger on Channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID2</name>
              <description>Fault Protection Trigger on Channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID3</name>
              <description>Fault Protection Trigger on Channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID4</name>
              <description>Fault Protection Trigger on Channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID5</name>
              <description>Fault Protection Trigger on Channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID6</name>
              <description>Fault Protection Trigger on Channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCHID7</name>
              <description>Fault Protection Trigger on Channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCM</name>
          <description>PWM Sync Channels Mode Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYNC0</name>
              <description>Synchronous Channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC1</name>
              <description>Synchronous Channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC2</name>
              <description>Synchronous Channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC3</name>
              <description>Synchronous Channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC4</name>
              <description>Synchronous Channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC5</name>
              <description>Synchronous Channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC6</name>
              <description>Synchronous Channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SYNC7</name>
              <description>Synchronous Channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPDM</name>
              <description>Synchronous Channels Update Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MODE0</name>
                  <description>Manual write of double buffer registers and manual update of synchronous channels</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MODE1</name>
                  <description>Manual write of double buffer registers and automatic update of synchronous channels</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MODE2</name>
                  <description>Automatic write of duty-cycle update registers by the PDC and automatic update of synchronous channels</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PTRM</name>
              <description>PDC Transfer Request Mode</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PTRCS</name>
              <description>PDC Transfer Request Comparison Selection</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCUC</name>
          <description>PWM Sync Channels Update Control Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPDULOCK</name>
              <description>Synchronous Channels Update Unlock</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCUP</name>
          <description>PWM Sync Channels Update Period Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPR</name>
              <description>Update Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPRCNT</name>
              <description>Update Period Counter</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCUPUPD</name>
          <description>PWM Sync Channels Update Period Update Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPRUPD</name>
              <description>Update Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>PWM Interrupt Enable Register 2</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>WRDY</name>
              <description>Write Ready for Synchronous Channels Update Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>PDC End of TX Buffer Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>PDC TX Buffer Empty Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Synchronous Channels Update Underrun Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM0</name>
              <description>Comparison 0 Match Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM1</name>
              <description>Comparison 1 Match Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM2</name>
              <description>Comparison 2 Match Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM3</name>
              <description>Comparison 3 Match Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM4</name>
              <description>Comparison 4 Match Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM5</name>
              <description>Comparison 5 Match Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM6</name>
              <description>Comparison 6 Match Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM7</name>
              <description>Comparison 7 Match Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU0</name>
              <description>Comparison 0 Update Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU1</name>
              <description>Comparison 1 Update Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU2</name>
              <description>Comparison 2 Update Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU3</name>
              <description>Comparison 3 Update Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU4</name>
              <description>Comparison 4 Update Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU5</name>
              <description>Comparison 5 Update Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU6</name>
              <description>Comparison 6 Update Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU7</name>
              <description>Comparison 7 Update Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>PWM Interrupt Disable Register 2</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>WRDY</name>
              <description>Write Ready for Synchronous Channels Update Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>PDC End of TX Buffer Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>PDC TX Buffer Empty Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Synchronous Channels Update Underrun Error Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM0</name>
              <description>Comparison 0 Match Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM1</name>
              <description>Comparison 1 Match Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM2</name>
              <description>Comparison 2 Match Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM3</name>
              <description>Comparison 3 Match Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM4</name>
              <description>Comparison 4 Match Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM5</name>
              <description>Comparison 5 Match Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM6</name>
              <description>Comparison 6 Match Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPM7</name>
              <description>Comparison 7 Match Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU0</name>
              <description>Comparison 0 Update Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU1</name>
              <description>Comparison 1 Update Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU2</name>
              <description>Comparison 2 Update Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU3</name>
              <description>Comparison 3 Update Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU4</name>
              <description>Comparison 4 Update Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU5</name>
              <description>Comparison 5 Update Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU6</name>
              <description>Comparison 6 Update Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMPU7</name>
              <description>Comparison 7 Update Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>PWM Interrupt Mask Register 2</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WRDY</name>
              <description>Write Ready for Synchronous Channels Update Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>PDC End of TX Buffer Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>PDC TX Buffer Empty Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Synchronous Channels Update Underrun Error Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM0</name>
              <description>Comparison 0 Match Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM1</name>
              <description>Comparison 1 Match Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM2</name>
              <description>Comparison 2 Match Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM3</name>
              <description>Comparison 3 Match Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM4</name>
              <description>Comparison 4 Match Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM5</name>
              <description>Comparison 5 Match Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM6</name>
              <description>Comparison 6 Match Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM7</name>
              <description>Comparison 7 Match Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU0</name>
              <description>Comparison 0 Update Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU1</name>
              <description>Comparison 1 Update Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU2</name>
              <description>Comparison 2 Update Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU3</name>
              <description>Comparison 3 Update Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU4</name>
              <description>Comparison 4 Update Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU5</name>
              <description>Comparison 5 Update Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU6</name>
              <description>Comparison 6 Update Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU7</name>
              <description>Comparison 7 Update Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR2</name>
          <description>PWM Interrupt Status Register 2</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WRDY</name>
              <description>Write Ready for Synchronous Channels Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>PDC End of TX Buffer</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>PDC TX Buffer Empty</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Synchronous Channels Update Underrun Error</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM0</name>
              <description>Comparison 0 Match</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM1</name>
              <description>Comparison 1 Match</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM2</name>
              <description>Comparison 2 Match</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM3</name>
              <description>Comparison 3 Match</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM4</name>
              <description>Comparison 4 Match</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM5</name>
              <description>Comparison 5 Match</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM6</name>
              <description>Comparison 6 Match</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPM7</name>
              <description>Comparison 7 Match</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU0</name>
              <description>Comparison 0 Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU1</name>
              <description>Comparison 1 Update</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU2</name>
              <description>Comparison 2 Update</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU3</name>
              <description>Comparison 3 Update</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU4</name>
              <description>Comparison 4 Update</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU5</name>
              <description>Comparison 5 Update</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU6</name>
              <description>Comparison 6 Update</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMPU7</name>
              <description>Comparison 7 Update</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OOV</name>
          <description>PWM Output Override Value Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OOVH0</name>
              <description>Output Override Value for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH1</name>
              <description>Output Override Value for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH2</name>
              <description>Output Override Value for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH3</name>
              <description>Output Override Value for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH4</name>
              <description>Output Override Value for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH5</name>
              <description>Output Override Value for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH6</name>
              <description>Output Override Value for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVH7</name>
              <description>Output Override Value for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL0</name>
              <description>Output Override Value for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL1</name>
              <description>Output Override Value for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL2</name>
              <description>Output Override Value for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL3</name>
              <description>Output Override Value for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL4</name>
              <description>Output Override Value for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL5</name>
              <description>Output Override Value for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL6</name>
              <description>Output Override Value for PWML output of the channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OOVL7</name>
              <description>Output Override Value for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OS</name>
          <description>PWM Output Selection Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OSH0</name>
              <description>Output Selection for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH1</name>
              <description>Output Selection for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH2</name>
              <description>Output Selection for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH3</name>
              <description>Output Selection for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH4</name>
              <description>Output Selection for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH5</name>
              <description>Output Selection for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH6</name>
              <description>Output Selection for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSH7</name>
              <description>Output Selection for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL0</name>
              <description>Output Selection for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL1</name>
              <description>Output Selection for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL2</name>
              <description>Output Selection for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL3</name>
              <description>Output Selection for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL4</name>
              <description>Output Selection for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL5</name>
              <description>Output Selection for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL6</name>
              <description>Output Selection for PWML output of the channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSL7</name>
              <description>Output Selection for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSS</name>
          <description>PWM Output Selection Set Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>OSSH0</name>
              <description>Output Selection Set for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH1</name>
              <description>Output Selection Set for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH2</name>
              <description>Output Selection Set for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH3</name>
              <description>Output Selection Set for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH4</name>
              <description>Output Selection Set for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH5</name>
              <description>Output Selection Set for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH6</name>
              <description>Output Selection Set for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSH7</name>
              <description>Output Selection Set for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL0</name>
              <description>Output Selection Set for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL1</name>
              <description>Output Selection Set for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL2</name>
              <description>Output Selection Set for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL3</name>
              <description>Output Selection Set for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL4</name>
              <description>Output Selection Set for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL5</name>
              <description>Output Selection Set for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL6</name>
              <description>Output Selection Set for PWML output of the channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSL7</name>
              <description>Output Selection Set for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSC</name>
          <description>PWM Output Selection Clear Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>OSCH0</name>
              <description>Output Selection Clear for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH1</name>
              <description>Output Selection Clear for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH2</name>
              <description>Output Selection Clear for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH3</name>
              <description>Output Selection Clear for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH4</name>
              <description>Output Selection Clear for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH5</name>
              <description>Output Selection Clear for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH6</name>
              <description>Output Selection Clear for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCH7</name>
              <description>Output Selection Clear for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL0</name>
              <description>Output Selection Clear for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL1</name>
              <description>Output Selection Clear for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL2</name>
              <description>Output Selection Clear for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL3</name>
              <description>Output Selection Clear for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL4</name>
              <description>Output Selection Clear for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL5</name>
              <description>Output Selection Clear for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL6</name>
              <description>Output Selection Clear for PWML output of the channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCL7</name>
              <description>Output Selection Clear for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSSUPD</name>
          <description>PWM Output Selection Set Update Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>OSSUPH0</name>
              <description>Output Selection Set for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH1</name>
              <description>Output Selection Set for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH2</name>
              <description>Output Selection Set for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH3</name>
              <description>Output Selection Set for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH4</name>
              <description>Output Selection Set for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH5</name>
              <description>Output Selection Set for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH6</name>
              <description>Output Selection Set for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPH7</name>
              <description>Output Selection Set for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL0</name>
              <description>Output Selection Set for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL1</name>
              <description>Output Selection Set for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL2</name>
              <description>Output Selection Set for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL3</name>
              <description>Output Selection Set for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL4</name>
              <description>Output Selection Set for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL5</name>
              <description>Output Selection Set for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL6</name>
              <description>Output Selection Set for PWML output of the channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSSUPL7</name>
              <description>Output Selection Set for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSCUPD</name>
          <description>PWM Output Selection Clear Update Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>OSCUPH0</name>
              <description>Output Selection Clear for PWMH output of the channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH1</name>
              <description>Output Selection Clear for PWMH output of the channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH2</name>
              <description>Output Selection Clear for PWMH output of the channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH3</name>
              <description>Output Selection Clear for PWMH output of the channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH4</name>
              <description>Output Selection Clear for PWMH output of the channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH5</name>
              <description>Output Selection Clear for PWMH output of the channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH6</name>
              <description>Output Selection Clear for PWMH output of the channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPH7</name>
              <description>Output Selection Clear for PWMH output of the channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL0</name>
              <description>Output Selection Clear for PWML output of the channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL1</name>
              <description>Output Selection Clear for PWML output of the channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL2</name>
              <description>Output Selection Clear for PWML output of the channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL3</name>
              <description>Output Selection Clear for PWML output of the channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL4</name>
              <description>Output Selection Clear for PWML output of the channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL5</name>
              <description>Output Selection Clear for PWML output of the channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPDL6</name>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OSCUPL7</name>
              <description>Output Selection Clear for PWML output of the channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FMR</name>
          <description>PWM Fault Mode Register</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FPOL</name>
              <description>Fault Polarity (fault input bit varies from 0 to 5)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FMOD</name>
              <description>Fault Activation Mode (fault input bit varies from 0 to 5)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FFIL</name>
              <description>Fault Filtering (fault input bit varies from 0 to 5)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FSR</name>
          <description>PWM Fault Status Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIV</name>
              <description>Fault Input Value (fault input bit varies from 0 to 5)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FS</name>
              <description>Fault Status (fault input bit varies from 0 to 5)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FCR</name>
          <description>PWM Fault Clear Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FCLR</name>
              <description>Fault Clear (fault input bit varies from 0 to 5)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FPV</name>
          <description>PWM Fault Protection Value Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FPVH0</name>
              <description>Fault Protection Value for PWMH output on channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH1</name>
              <description>Fault Protection Value for PWMH output on channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH2</name>
              <description>Fault Protection Value for PWMH output on channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH3</name>
              <description>Fault Protection Value for PWMH output on channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH4</name>
              <description>Fault Protection Value for PWMH output on channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH5</name>
              <description>Fault Protection Value for PWMH output on channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH6</name>
              <description>Fault Protection Value for PWMH output on channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVH7</name>
              <description>Fault Protection Value for PWMH output on channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL0</name>
              <description>Fault Protection Value for PWML output on channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL1</name>
              <description>Fault Protection Value for PWML output on channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL2</name>
              <description>Fault Protection Value for PWML output on channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL3</name>
              <description>Fault Protection Value for PWML output on channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL4</name>
              <description>Fault Protection Value for PWML output on channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL5</name>
              <description>Fault Protection Value for PWML output on channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL6</name>
              <description>Fault Protection Value for PWML output on channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPVL7</name>
              <description>Fault Protection Value for PWML output on channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FPE1</name>
          <description>PWM Fault Protection Enable Register 1</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FPE0</name>
              <description>Fault Protection Enable for channel 0 (fault input bit varies from 0 to 5)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE1</name>
              <description>Fault Protection Enable for channel 1 (fault input bit varies from 0 to 5)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE2</name>
              <description>Fault Protection Enable for channel 2 (fault input bit varies from 0 to 5)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE3</name>
              <description>Fault Protection Enable for channel 3 (fault input bit varies from 0 to 5)</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FPE2</name>
          <description>PWM Fault Protection Enable Register 2</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FPE4</name>
              <description>Fault Protection Enable for channel 4 (fault input bit varies from 0 to 5)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE5</name>
              <description>Fault Protection Enable for channel 5 (fault input bit varies from 0 to 5)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE6</name>
              <description>Fault Protection Enable for channel 6 (fault input bit varies from 0 to 5)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FPE7</name>
              <description>Fault Protection Enable for channel 7 (fault input bit varies from 0 to 5)</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>ELMR%s</name>
          <description>PWM Event Line 0 Mode Register</description>
          <addressOffset>0x0000007C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CSEL0</name>
              <description>Comparison 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL1</name>
              <description>Comparison 1 Selection</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL2</name>
              <description>Comparison 2 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL3</name>
              <description>Comparison 3 Selection</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL4</name>
              <description>Comparison 4 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL5</name>
              <description>Comparison 5 Selection</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL6</name>
              <description>Comparison 6 Selection</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSEL7</name>
              <description>Comparison 7 Selection</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR</name>
          <description>PWM Stepper Motor Mode Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GCEN0</name>
              <description>Gray Count ENable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GCEN1</name>
              <description>Gray Count ENable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GCEN2</name>
              <description>Gray Count ENable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GCEN3</name>
              <description>Gray Count ENable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN0</name>
              <description>DOWN Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN1</name>
              <description>DOWN Count</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN2</name>
              <description>DOWN Count</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DOWN3</name>
              <description>DOWN Count</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPCR</name>
          <description>PWM Write Protect Control Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>WPCMD</name>
              <description>Write Protect Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG0</name>
              <description>Write Protect Register Group 0</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG1</name>
              <description>Write Protect Register Group 1</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG2</name>
              <description>Write Protect Register Group 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG3</name>
              <description>Write Protect Register Group 3</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG4</name>
              <description>Write Protect Register Group 4</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPRG5</name>
              <description>Write Protect Register Group 5</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect Key</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>PWM Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPSWS0</name>
              <description>Write Protect SW Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPSWS1</name>
              <description>Write Protect SW Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPSWS2</name>
              <description>Write Protect SW Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPSWS3</name>
              <description>Write Protect SW Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPSWS4</name>
              <description>Write Protect SW Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPSWS5</name>
              <description>Write Protect SW Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS0</name>
              <description>Write Protect HW Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS1</name>
              <description>Write Protect HW Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS2</name>
              <description>Write Protect HW Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS3</name>
              <description>Write Protect HW Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS4</name>
              <description>Write Protect HW Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPHWS5</name>
              <description>Write Protect HW Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV0</name>
          <description>PWM Comparison 0 Value Register</description>
          <addressOffset>0x00000130</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD0</name>
          <description>PWM Comparison 0 Value Update Register</description>
          <addressOffset>0x00000134</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM0</name>
          <description>PWM Comparison 0 Mode Register</description>
          <addressOffset>0x00000138</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD0</name>
          <description>PWM Comparison 0 Mode Update Register</description>
          <addressOffset>0x0000013C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV1</name>
          <description>PWM Comparison 1 Value Register</description>
          <addressOffset>0x00000140</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD1</name>
          <description>PWM Comparison 1 Value Update Register</description>
          <addressOffset>0x00000144</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM1</name>
          <description>PWM Comparison 1 Mode Register</description>
          <addressOffset>0x00000148</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD1</name>
          <description>PWM Comparison 1 Mode Update Register</description>
          <addressOffset>0x0000014C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV2</name>
          <description>PWM Comparison 2 Value Register</description>
          <addressOffset>0x00000150</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD2</name>
          <description>PWM Comparison 2 Value Update Register</description>
          <addressOffset>0x00000154</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM2</name>
          <description>PWM Comparison 2 Mode Register</description>
          <addressOffset>0x00000158</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD2</name>
          <description>PWM Comparison 2 Mode Update Register</description>
          <addressOffset>0x0000015C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV3</name>
          <description>PWM Comparison 3 Value Register</description>
          <addressOffset>0x00000160</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD3</name>
          <description>PWM Comparison 3 Value Update Register</description>
          <addressOffset>0x00000164</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM3</name>
          <description>PWM Comparison 3 Mode Register</description>
          <addressOffset>0x00000168</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD3</name>
          <description>PWM Comparison 3 Mode Update Register</description>
          <addressOffset>0x0000016C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV4</name>
          <description>PWM Comparison 4 Value Register</description>
          <addressOffset>0x00000170</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD4</name>
          <description>PWM Comparison 4 Value Update Register</description>
          <addressOffset>0x00000174</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM4</name>
          <description>PWM Comparison 4 Mode Register</description>
          <addressOffset>0x00000178</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD4</name>
          <description>PWM Comparison 4 Mode Update Register</description>
          <addressOffset>0x0000017C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV5</name>
          <description>PWM Comparison 5 Value Register</description>
          <addressOffset>0x00000180</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD5</name>
          <description>PWM Comparison 5 Value Update Register</description>
          <addressOffset>0x00000184</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM5</name>
          <description>PWM Comparison 5 Mode Register</description>
          <addressOffset>0x00000188</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD5</name>
          <description>PWM Comparison 5 Mode Update Register</description>
          <addressOffset>0x0000018C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV6</name>
          <description>PWM Comparison 6 Value Register</description>
          <addressOffset>0x00000190</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD6</name>
          <description>PWM Comparison 6 Value Update Register</description>
          <addressOffset>0x00000194</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM6</name>
          <description>PWM Comparison 6 Mode Register</description>
          <addressOffset>0x00000198</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD6</name>
          <description>PWM Comparison 6 Mode Update Register</description>
          <addressOffset>0x0000019C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPV7</name>
          <description>PWM Comparison 7 Value Register</description>
          <addressOffset>0x000001A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Comparison x Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CVM</name>
              <description>Comparison x Value Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPVUPD7</name>
          <description>PWM Comparison 7 Value Update Register</description>
          <addressOffset>0x000001A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CVUPD</name>
              <description>Comparison x Value Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CVMUPD</name>
              <description>Comparison x Value Mode Update</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPM7</name>
          <description>PWM Comparison 7 Mode Register</description>
          <addressOffset>0x000001A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CEN</name>
              <description>Comparison x Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CTR</name>
              <description>Comparison x Trigger</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPR</name>
              <description>Comparison x Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPRCNT</name>
              <description>Comparison x Period Counter</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPR</name>
              <description>Comparison x Update Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CUPRCNT</name>
              <description>Comparison x Update Period Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMPMUPD7</name>
          <description>PWM Comparison 7 Mode Update Register</description>
          <addressOffset>0x000001AC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CENUPD</name>
              <description>Comparison x Enable Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTRUPD</name>
              <description>Comparison x Trigger Update</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPRUPD</name>
              <description>Comparison x Period Update</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CUPRUPD</name>
              <description>Comparison x Update Period Update</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>PWM Channel Mode Register (ch_num = 0)</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY0</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 0)</description>
          <addressOffset>0x00000204</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD0</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 0)</description>
          <addressOffset>0x00000208</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD0</name>
          <description>PWM Channel Period Register (ch_num = 0)</description>
          <addressOffset>0x0000020C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD0</name>
          <description>PWM Channel Period Update Register (ch_num = 0)</description>
          <addressOffset>0x00000210</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT0</name>
          <description>PWM Channel Counter Register (ch_num = 0)</description>
          <addressOffset>0x00000214</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT0</name>
          <description>PWM Channel Dead Time Register (ch_num = 0)</description>
          <addressOffset>0x00000218</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD0</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 0)</description>
          <addressOffset>0x0000021C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>PWM Channel Mode Register (ch_num = 1)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY1</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 1)</description>
          <addressOffset>0x00000224</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD1</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 1)</description>
          <addressOffset>0x00000228</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD1</name>
          <description>PWM Channel Period Register (ch_num = 1)</description>
          <addressOffset>0x0000022C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD1</name>
          <description>PWM Channel Period Update Register (ch_num = 1)</description>
          <addressOffset>0x00000230</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT1</name>
          <description>PWM Channel Counter Register (ch_num = 1)</description>
          <addressOffset>0x00000234</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT1</name>
          <description>PWM Channel Dead Time Register (ch_num = 1)</description>
          <addressOffset>0x00000238</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD1</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 1)</description>
          <addressOffset>0x0000023C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>PWM Channel Mode Register (ch_num = 2)</description>
          <addressOffset>0x00000240</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY2</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 2)</description>
          <addressOffset>0x00000244</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD2</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 2)</description>
          <addressOffset>0x00000248</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD2</name>
          <description>PWM Channel Period Register (ch_num = 2)</description>
          <addressOffset>0x0000024C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD2</name>
          <description>PWM Channel Period Update Register (ch_num = 2)</description>
          <addressOffset>0x00000250</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT2</name>
          <description>PWM Channel Counter Register (ch_num = 2)</description>
          <addressOffset>0x00000254</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT2</name>
          <description>PWM Channel Dead Time Register (ch_num = 2)</description>
          <addressOffset>0x00000258</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD2</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 2)</description>
          <addressOffset>0x0000025C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR3</name>
          <description>PWM Channel Mode Register (ch_num = 3)</description>
          <addressOffset>0x00000260</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY3</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 3)</description>
          <addressOffset>0x00000264</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD3</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 3)</description>
          <addressOffset>0x00000268</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD3</name>
          <description>PWM Channel Period Register (ch_num = 3)</description>
          <addressOffset>0x0000026C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD3</name>
          <description>PWM Channel Period Update Register (ch_num = 3)</description>
          <addressOffset>0x00000270</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT3</name>
          <description>PWM Channel Counter Register (ch_num = 3)</description>
          <addressOffset>0x00000274</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT3</name>
          <description>PWM Channel Dead Time Register (ch_num = 3)</description>
          <addressOffset>0x00000278</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD3</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 3)</description>
          <addressOffset>0x0000027C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR4</name>
          <description>PWM Channel Mode Register (ch_num = 4)</description>
          <addressOffset>0x00000280</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY4</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 4)</description>
          <addressOffset>0x00000284</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD4</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 4)</description>
          <addressOffset>0x00000288</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD4</name>
          <description>PWM Channel Period Register (ch_num = 4)</description>
          <addressOffset>0x0000028C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD4</name>
          <description>PWM Channel Period Update Register (ch_num = 4)</description>
          <addressOffset>0x00000290</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT4</name>
          <description>PWM Channel Counter Register (ch_num = 4)</description>
          <addressOffset>0x00000294</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT4</name>
          <description>PWM Channel Dead Time Register (ch_num = 4)</description>
          <addressOffset>0x00000298</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD4</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 4)</description>
          <addressOffset>0x0000029C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR5</name>
          <description>PWM Channel Mode Register (ch_num = 5)</description>
          <addressOffset>0x000002A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY5</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 5)</description>
          <addressOffset>0x000002A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD5</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 5)</description>
          <addressOffset>0x000002A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD5</name>
          <description>PWM Channel Period Register (ch_num = 5)</description>
          <addressOffset>0x000002AC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD5</name>
          <description>PWM Channel Period Update Register (ch_num = 5)</description>
          <addressOffset>0x000002B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT5</name>
          <description>PWM Channel Counter Register (ch_num = 5)</description>
          <addressOffset>0x000002B4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT5</name>
          <description>PWM Channel Dead Time Register (ch_num = 5)</description>
          <addressOffset>0x000002B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD5</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 5)</description>
          <addressOffset>0x000002BC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR6</name>
          <description>PWM Channel Mode Register (ch_num = 6)</description>
          <addressOffset>0x000002C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY6</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 6)</description>
          <addressOffset>0x000002C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD6</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 6)</description>
          <addressOffset>0x000002C8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD6</name>
          <description>PWM Channel Period Register (ch_num = 6)</description>
          <addressOffset>0x000002CC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD6</name>
          <description>PWM Channel Period Update Register (ch_num = 6)</description>
          <addressOffset>0x000002D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT6</name>
          <description>PWM Channel Counter Register (ch_num = 6)</description>
          <addressOffset>0x000002D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT6</name>
          <description>PWM Channel Dead Time Register (ch_num = 6)</description>
          <addressOffset>0x000002D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD6</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 6)</description>
          <addressOffset>0x000002DC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR7</name>
          <description>PWM Channel Mode Register (ch_num = 7)</description>
          <addressOffset>0x000002E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_2</name>
                  <description>Master clock/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_4</name>
                  <description>Master clock/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_8</name>
                  <description>Master clock/8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_16</name>
                  <description>Master clock/16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_32</name>
                  <description>Master clock/32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_64</name>
                  <description>Master clock/64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_128</name>
                  <description>Master clock/128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_256</name>
                  <description>Master clock/256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_512</name>
                  <description>Master clock/512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_DIV_1024</name>
                  <description>Master clock/1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CES</name>
              <description>Counter Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTE</name>
              <description>Dead-Time Generator Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTHI</name>
              <description>Dead-Time PWMHx Output Inverted</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTLI</name>
              <description>Dead-Time PWMLx Output Inverted</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY7</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 7)</description>
          <addressOffset>0x000002E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty-Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTYUPD7</name>
          <description>PWM Channel Duty Cycle Update Register (ch_num = 7)</description>
          <addressOffset>0x000002E8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CDTYUPD</name>
              <description>Channel Duty-Cycle Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD7</name>
          <description>PWM Channel Period Register (ch_num = 7)</description>
          <addressOffset>0x000002EC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRDUPD7</name>
          <description>PWM Channel Period Update Register (ch_num = 7)</description>
          <addressOffset>0x000002F0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CPRDUPD</name>
              <description>Channel Period Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT7</name>
          <description>PWM Channel Counter Register (ch_num = 7)</description>
          <addressOffset>0x000002F4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DT7</name>
          <description>PWM Channel Dead Time Register (ch_num = 7)</description>
          <addressOffset>0x000002F8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTH</name>
              <description>Dead-Time Value for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTL</name>
              <description>Dead-Time Value for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTUPD7</name>
          <description>PWM Channel Dead Time Update Register (ch_num = 7)</description>
          <addressOffset>0x000002FC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DTHUPD</name>
              <description>Dead-Time Value Update for PWMHx Output</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTLUPD</name>
              <description>Dead-Time Value Update for PWMLx Output</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART0</name>
      <version>6089W</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 0</description>
      <groupName>USART</groupName>
      <prependToName>USART0_</prependToName>
      <baseAddress>0x40098000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_USART0</name>
        <value>17</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receiver Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmitter Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmission Buffer Empty</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Reception Buffer Full</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x30011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STUCKTO1</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>PDC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART1</name>
      <version>6089W</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 1</description>
      <groupName>USART</groupName>
      <prependToName>USART1_</prependToName>
      <baseAddress>0x4009C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_USART1</name>
        <value>18</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receiver Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmitter Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmission Buffer Empty</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Reception Buffer Full</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x30011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STUCKTO1</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>PDC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART2</name>
      <version>6089W</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 2</description>
      <groupName>USART</groupName>
      <prependToName>USART2_</prependToName>
      <baseAddress>0x400A0000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_USART2</name>
        <value>19</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receiver Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmitter Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmission Buffer Empty</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Reception Buffer Full</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x30011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STUCKTO1</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>PDC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART3</name>
      <version>6089W</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 3</description>
      <groupName>USART</groupName>
      <prependToName>USART3_</prependToName>
      <baseAddress>0x400A4000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_USART3</name>
        <value>20</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Transfer Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Buffer Empty Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Buffer Full Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receiver Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmitter Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmission Buffer Empty</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Reception Buffer Full</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x30011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STUCKTO1</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>PDC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UOTGHS</name>
      <version>11016B</version>
      <description>USB On-The-Go Interface</description>
      <prependToName>UOTGHS_</prependToName>
      <baseAddress>0x400AC000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_UOTGHS</name>
        <value>40</value>
      </interrupt>
      <registers>
        <register>
          <name>DEVCTRL</name>
          <description>Device General Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000100</resetValue>
          <fields>
            <field>
              <name>UADD</name>
              <description>USB Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ADDEN</name>
              <description>Address Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DETACH</name>
              <description>Detach</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RMWKUP</name>
              <description>Remote Wake-Up</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPDCONF</name>
              <description>Mode Configuration</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>The peripheral starts in full-speed mode and performs a high-speed reset to switch to the high-speed mode if the host is high-speed capable.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_POWER</name>
                  <description>For a better consumption, if high-speed is not needed.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH_SPEED</name>
                  <description>Forced high speed.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FORCED_FS</name>
                  <description>The peripheral remains in full-speed mode whatever the host speed capability.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LS</name>
              <description>Low-Speed Mode Force</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TSTJ</name>
              <description>Test mode J</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TSTK</name>
              <description>Test mode K</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TSTPCKT</name>
              <description>Test packet mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OPMODE2</name>
              <description>Specific Operational mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVISR</name>
          <description>Device Global Interrupt Status Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SUSP</name>
              <description>Suspend Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MSOF</name>
              <description>Micro Start of Frame Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SOF</name>
              <description>Start of Frame Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EORST</name>
              <description>End of Reset Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wake-Up Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EORSM</name>
              <description>End of Resume Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UPRSM</name>
              <description>Upstream Resume Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Endpoint 0 Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Endpoint 1 Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Endpoint 2 Interrupt</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Endpoint 3 Interrupt</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Endpoint 4 Interrupt</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Endpoint 5 Interrupt</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Endpoint 6 Interrupt</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Endpoint 7 Interrupt</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Endpoint 8 Interrupt</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Endpoint 9 Interrupt</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVICR</name>
          <description>Device Global Interrupt Clear Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SUSPC</name>
              <description>Suspend Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSOFC</name>
              <description>Micro Start of Frame Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFC</name>
              <description>Start of Frame Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSTC</name>
              <description>End of Reset Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUPC</name>
              <description>Wake-Up Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSMC</name>
              <description>End of Resume Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UPRSMC</name>
              <description>Upstream Resume Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVIFR</name>
          <description>Device Global Interrupt Set Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SUSPS</name>
              <description>Suspend Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSOFS</name>
              <description>Micro Start of Frame Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFS</name>
              <description>Start of Frame Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSTS</name>
              <description>End of Reset Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUPS</name>
              <description>Wake-Up Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSMS</name>
              <description>End of Resume Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UPRSMS</name>
              <description>Upstream Resume Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Set</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Set</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Set</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Set</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Set</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Set</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVIMR</name>
          <description>Device Global Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SUSPE</name>
              <description>Suspend Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MSOFE</name>
              <description>Micro Start of Frame Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SOFE</name>
              <description>Start of Frame Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EORSTE</name>
              <description>End of Reset Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUPE</name>
              <description>Wake-Up Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EORSME</name>
              <description>End of Resume Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UPRSME</name>
              <description>Upstream Resume Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Endpoint 0 Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Endpoint 1 Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Endpoint 2 Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Endpoint 3 Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Endpoint 4 Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Endpoint 5 Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Endpoint 6 Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Endpoint 7 Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Endpoint 8 Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Endpoint 9 Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVIDR</name>
          <description>Device Global Interrupt Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SUSPEC</name>
              <description>Suspend Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSOFEC</name>
              <description>Micro Start of Frame Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFEC</name>
              <description>Start of Frame Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSTEC</name>
              <description>End of Reset Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUPEC</name>
              <description>Wake-Up Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSMEC</name>
              <description>End of Resume Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UPRSMEC</name>
              <description>Upstream Resume Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Endpoint 0 Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Endpoint 1 Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Endpoint 2 Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Endpoint 3 Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Endpoint 4 Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Endpoint 5 Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Endpoint 6 Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Endpoint 7 Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Endpoint 8 Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Endpoint 9 Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVIER</name>
          <description>Device Global Interrupt Enable Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SUSPES</name>
              <description>Suspend Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSOFES</name>
              <description>Micro Start of Frame Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFES</name>
              <description>Start of Frame Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSTES</name>
              <description>End of Reset Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUPES</name>
              <description>Wake-Up Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EORSMES</name>
              <description>End of Resume Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UPRSMES</name>
              <description>Upstream Resume Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Endpoint 0 Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Endpoint 1 Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Endpoint 2 Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Endpoint 3 Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Endpoint 4 Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Endpoint 5 Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Endpoint 6 Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Endpoint 7 Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Endpoint 8 Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Endpoint 9 Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVEPT</name>
          <description>Device Endpoint Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EPEN0</name>
              <description>Endpoint 0 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN1</name>
              <description>Endpoint 1 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN2</name>
              <description>Endpoint 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN3</name>
              <description>Endpoint 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN4</name>
              <description>Endpoint 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN5</name>
              <description>Endpoint 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN6</name>
              <description>Endpoint 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN7</name>
              <description>Endpoint 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEN8</name>
              <description>Endpoint 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST0</name>
              <description>Endpoint 0 Reset</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST1</name>
              <description>Endpoint 1 Reset</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST2</name>
              <description>Endpoint 2 Reset</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST3</name>
              <description>Endpoint 3 Reset</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST4</name>
              <description>Endpoint 4 Reset</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST5</name>
              <description>Endpoint 5 Reset</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST6</name>
              <description>Endpoint 6 Reset</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST7</name>
              <description>Endpoint 7 Reset</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPRST8</name>
              <description>Endpoint 8 Reset</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVFNUM</name>
          <description>Device Frame Number Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFNUM</name>
              <description>Micro Frame Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FNUM</name>
              <description>Frame Number</description>
              <bitOffset>3</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FNCERR</name>
              <description>Frame Number CRC Error</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTCFG%s</name>
          <description>Device Endpoint Configuration Register (n = 0)</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>ALLOC</name>
              <description>Endpoint Memory Allocate</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPBK</name>
              <description>Endpoint Banks</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BANK</name>
                  <description>Single-bank endpoint</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BANK</name>
                  <description>Double-bank endpoint</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BANK</name>
                  <description>Triple-bank endpoint</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EPSIZE</name>
              <description>Endpoint Size</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BYTE</name>
                  <description>8 bytes</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16_BYTE</name>
                  <description>16 bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32_BYTE</name>
                  <description>32 bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64_BYTE</name>
                  <description>64 bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128_BYTE</name>
                  <description>128 bytes</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256_BYTE</name>
                  <description>256 bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512_BYTE</name>
                  <description>512 bytes</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024_BYTE</name>
                  <description>1024 bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EPDIR</name>
              <description>Endpoint Direction</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OUT</name>
                  <description>The endpoint direction is OUT.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IN</name>
                  <description>The endpoint direction is IN (nor for control endpoints).</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AUTOSW</name>
              <description>Automatic Switch</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPTYPE</name>
              <description>Endpoint Type</description>
              <bitOffset>11</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CTRL</name>
                  <description>Control</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO</name>
                  <description>Isochronous</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BLK</name>
                  <description>Bulk</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INTRPT</name>
                  <description>Interrupt</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBTRANS</name>
              <description>Number of transaction per microframe for isochronous endpoint</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>0_TRANS</name>
                  <description>reserved to endpoint that does not have the high-bandwidth isochronous capability.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_TRANS</name>
                  <description>default value: one transaction per micro-frame.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_TRANS</name>
                  <description>2 transactions per micro-frame. This endpoint should be configured as double-bank.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_TRANS</name>
                  <description>3 transactions per micro-frame. This endpoint should be configured as triple-bank.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTISR%s</name>
          <description>Device Endpoint Status Register (n = 0)</description>
          <addressOffset>0x00000130</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>TXINI</name>
              <description>Transmitted IN Data Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXOUTI</name>
              <description>Received OUT Data Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSTPI</name>
              <description>Received SETUP Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDERFI</name>
              <description>Underflow Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKOUTI</name>
              <description>NAKed OUT Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HBISOINERRI</name>
              <description>High bandwidth isochronous IN Underflow Error Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKINI</name>
              <description>NAKed IN Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HBISOFLUSHI</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVERFI</name>
              <description>Overflow Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STALLEDI</name>
              <description>STALLed Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CRCERRI</name>
              <description>CRC Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SHORTPACKET</name>
              <description>Short Packet Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTSEQ</name>
              <description>Data Toggle Sequence</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DATA0</name>
                  <description>Data0 toggle sequence</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DATA1</name>
                  <description>Data1 toggle sequence</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DATA2</name>
                  <description>Data2 toggle sequence (for high-bandwidth isochronous endpoint)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MDATA</name>
                  <description>MData toggle sequence (for high-bandwidth isochronous endpoint)</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERRORTRANS</name>
              <description>High-bandwidth isochronous OUT endpoint transaction error Interrupt</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NBUSYBK</name>
              <description>Number of Busy Banks</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>0_BUSY</name>
                  <description>0 busy bank (all banks free)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BUSY</name>
                  <description>1 busy bank</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BUSY</name>
                  <description>2 busy banks</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BUSY</name>
                  <description>3 busy banks</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CURRBK</name>
              <description>Current Bank</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BANK0</name>
                  <description>Current bank is bank0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BANK1</name>
                  <description>Current bank is bank1</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BANK2</name>
                  <description>Current bank is bank2</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RWALL</name>
              <description>Read-write Allowed</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTRLDIR</name>
              <description>Control Direction</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFGOK</name>
              <description>Configuration OK Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BYCT</name>
              <description>Byte Count</description>
              <bitOffset>20</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTICR%s</name>
          <description>Device Endpoint Clear Register (n = 0)</description>
          <addressOffset>0x00000160</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXINIC</name>
              <description>Transmitted IN Data Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXOUTIC</name>
              <description>Received OUT Data Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTPIC</name>
              <description>Received SETUP Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIC</name>
              <description>Underflow Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKOUTIC</name>
              <description>NAKed OUT Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOINERRIC</name>
              <description>High bandwidth isochronous IN Underflow Error Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKINIC</name>
              <description>NAKed IN Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOFLUSHIC</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIC</name>
              <description>Overflow Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLEDIC</name>
              <description>STALLed Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRIC</name>
              <description>CRC Error Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETC</name>
              <description>Short Packet Interrupt Clear</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTIFR%s</name>
          <description>Device Endpoint Set Register (n = 0)</description>
          <addressOffset>0x00000190</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXINIS</name>
              <description>Transmitted IN Data Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXOUTIS</name>
              <description>Received OUT Data Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTPIS</name>
              <description>Received SETUP Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIS</name>
              <description>Underflow Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKOUTIS</name>
              <description>NAKed OUT Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOINERRIS</name>
              <description>High bandwidth isochronous IN Underflow Error Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKINIS</name>
              <description>NAKed IN Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOFLUSHIS</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIS</name>
              <description>Overflow Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLEDIS</name>
              <description>STALLed Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRIS</name>
              <description>CRC Error Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETS</name>
              <description>Short Packet Interrupt Set</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKS</name>
              <description>Number of Busy Banks Interrupt Set</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTIMR%s</name>
          <description>Device Endpoint Mask Register (n = 0)</description>
          <addressOffset>0x000001C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>TXINE</name>
              <description>Transmitted IN Data Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXOUTE</name>
              <description>Received OUT Data Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSTPE</name>
              <description>Received SETUP Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDERFE</name>
              <description>Underflow Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKOUTE</name>
              <description>NAKed OUT Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HBISOINERRE</name>
              <description>High Bandwidth Isochronous IN Error Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKINE</name>
              <description>NAKed IN Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HBISOFLUSHE</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVERFE</name>
              <description>Overflow Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STALLEDE</name>
              <description>STALLed Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CRCERRE</name>
              <description>CRC Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SHORTPACKETE</name>
              <description>Short Packet Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDATAE</name>
              <description>MData Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DATAXE</name>
              <description>DataX Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRORTRANSE</name>
              <description>Transaction Error Interrupt</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NBUSYBKE</name>
              <description>Number of Busy Banks Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>KILLBK</name>
              <description>Kill IN Bank</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOCON</name>
              <description>FIFO Control</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EPDISHDMA</name>
              <description>Endpoint Interrupts Disable HDMA Request</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NYETDIS</name>
              <description>NYET Token Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTDT</name>
              <description>Reset Data Toggle</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STALLRQ</name>
              <description>STALL Request</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTIER%s</name>
          <description>Device Endpoint Enable Register (n = 0)</description>
          <addressOffset>0x000001F0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXINES</name>
              <description>Transmitted IN Data Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXOUTES</name>
              <description>Received OUT Data Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTPES</name>
              <description>Received SETUP Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFES</name>
              <description>Underflow Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKOUTES</name>
              <description>NAKed OUT Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOINERRES</name>
              <description>High Bandwidth Isochronous IN Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKINES</name>
              <description>NAKed IN Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOFLUSHES</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFES</name>
              <description>Overflow Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLEDES</name>
              <description>STALLed Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRES</name>
              <description>CRC Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETES</name>
              <description>Short Packet Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MDATAES</name>
              <description>MData Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DATAXES</name>
              <description>DataX Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRORTRANSES</name>
              <description>Transaction Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKES</name>
              <description>Number of Busy Banks Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KILLBKS</name>
              <description>Kill IN Bank</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EPDISHDMAS</name>
              <description>Endpoint Interrupts Disable HDMA Request Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NYETDISS</name>
              <description>NYET Token Disable Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTDTS</name>
              <description>Reset Data Toggle Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLRQS</name>
              <description>STALL Request Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>DEVEPTIDR%s</name>
          <description>Device Endpoint Disable Register (n = 0)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXINEC</name>
              <description>Transmitted IN Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXOUTEC</name>
              <description>Received OUT Data Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTPEC</name>
              <description>Received SETUP Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFEC</name>
              <description>Underflow Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKOUTEC</name>
              <description>NAKed OUT Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOINERREC</name>
              <description>High Bandwidth Isochronous IN Error Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKINEC</name>
              <description>NAKed IN Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HBISOFLUSHEC</name>
              <description>High Bandwidth Isochronous IN Flush Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFEC</name>
              <description>Overflow Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLEDEC</name>
              <description>STALLed Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERREC</name>
              <description>CRC Error Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETEC</name>
              <description>Shortpacket Interrupt Clear</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MDATEC</name>
              <description>MData Interrupt Clear</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DATAXEC</name>
              <description>DataX Interrupt Clear</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRORTRANSEC</name>
              <description>Transaction Error Interrupt Clear</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKEC</name>
              <description>Number of Busy Banks Interrupt Clear</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOCONC</name>
              <description>FIFO Control Clear</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EPDISHDMAC</name>
              <description>Endpoint Interrupts Disable HDMA Request Clear</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NYETDISC</name>
              <description>NYET Token Disable Clear</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STALLRQC</name>
              <description>STALL Request Clear</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC1</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 1)</description>
          <addressOffset>0x00000310</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS1</name>
          <description>Device DMA Channel Address Register (n = 1)</description>
          <addressOffset>0x00000314</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL1</name>
          <description>Device DMA Channel Control Register (n = 1)</description>
          <addressOffset>0x00000318</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS1</name>
          <description>Device DMA Channel Status Register (n = 1)</description>
          <addressOffset>0x0000031C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC2</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 2)</description>
          <addressOffset>0x00000320</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS2</name>
          <description>Device DMA Channel Address Register (n = 2)</description>
          <addressOffset>0x00000324</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL2</name>
          <description>Device DMA Channel Control Register (n = 2)</description>
          <addressOffset>0x00000328</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS2</name>
          <description>Device DMA Channel Status Register (n = 2)</description>
          <addressOffset>0x0000032C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC3</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 3)</description>
          <addressOffset>0x00000330</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS3</name>
          <description>Device DMA Channel Address Register (n = 3)</description>
          <addressOffset>0x00000334</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL3</name>
          <description>Device DMA Channel Control Register (n = 3)</description>
          <addressOffset>0x00000338</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS3</name>
          <description>Device DMA Channel Status Register (n = 3)</description>
          <addressOffset>0x0000033C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC4</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 4)</description>
          <addressOffset>0x00000340</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS4</name>
          <description>Device DMA Channel Address Register (n = 4)</description>
          <addressOffset>0x00000344</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL4</name>
          <description>Device DMA Channel Control Register (n = 4)</description>
          <addressOffset>0x00000348</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS4</name>
          <description>Device DMA Channel Status Register (n = 4)</description>
          <addressOffset>0x0000034C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC5</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 5)</description>
          <addressOffset>0x00000350</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS5</name>
          <description>Device DMA Channel Address Register (n = 5)</description>
          <addressOffset>0x00000354</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL5</name>
          <description>Device DMA Channel Control Register (n = 5)</description>
          <addressOffset>0x00000358</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS5</name>
          <description>Device DMA Channel Status Register (n = 5)</description>
          <addressOffset>0x0000035C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC6</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 6)</description>
          <addressOffset>0x00000360</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS6</name>
          <description>Device DMA Channel Address Register (n = 6)</description>
          <addressOffset>0x00000364</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL6</name>
          <description>Device DMA Channel Control Register (n = 6)</description>
          <addressOffset>0x00000368</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS6</name>
          <description>Device DMA Channel Status Register (n = 6)</description>
          <addressOffset>0x0000036C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMANXTDSC7</name>
          <description>Device DMA Channel Next Descriptor Address Register (n = 7)</description>
          <addressOffset>0x00000370</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMAADDRESS7</name>
          <description>Device DMA Channel Address Register (n = 7)</description>
          <addressOffset>0x00000374</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMACONTROL7</name>
          <description>Device DMA Channel Control Register (n = 7)</description>
          <addressOffset>0x00000378</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVDMASTATUS7</name>
          <description>Device DMA Channel Status Register (n = 7)</description>
          <addressOffset>0x0000037C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTCTRL</name>
          <description>Host General Control Register</description>
          <addressOffset>0x00000400</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SOFE</name>
              <description>Start of Frame Generation Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RESET</name>
              <description>Send USB Reset</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RESUME</name>
              <description>Send USB Resume</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPDCONF</name>
              <description>Mode Configuration</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>The host starts in full-speed mode and performs a high-speed reset to switch to the high-speed mode if the downstream peripheral is high-speed capable.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_POWER</name>
                  <description>For a better consumption, if high-speed is not needed.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH_SPEED</name>
                  <description>Forced high speed.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FORCED_FS</name>
                  <description>The host remains to full-speed mode whatever the peripheral speed capability.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTISR</name>
          <description>Host Global Interrupt Status Register</description>
          <addressOffset>0x00000404</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DCONNI</name>
              <description>Device Connection Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DDISCI</name>
              <description>Device Disconnection Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTI</name>
              <description>USB Reset Sent Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSMEDI</name>
              <description>Downstream Resume Sent Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRSMI</name>
              <description>Upstream Resume Received Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HSOFI</name>
              <description>Host Start of Frame Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HWUPI</name>
              <description>Host Wake-Up Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Pipe 0 Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Pipe 1 Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Pipe 2 Interrupt</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Pipe 3 Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Pipe 4 Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Pipe 5 Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Pipe 6 Interrupt</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Pipe 7 Interrupt</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Pipe 8 Interrupt</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Pipe 9 Interrupt</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTICR</name>
          <description>Host Global Interrupt Clear Register</description>
          <addressOffset>0x00000408</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DCONNIC</name>
              <description>Device Connection Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DDISCIC</name>
              <description>Device Disconnection Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIC</name>
              <description>USB Reset Sent Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSMEDIC</name>
              <description>Downstream Resume Sent Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSMIC</name>
              <description>Upstream Resume Received Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HSOFIC</name>
              <description>Host Start of Frame Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HWUPIC</name>
              <description>Host Wake-Up Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTIFR</name>
          <description>Host Global Interrupt Set Register</description>
          <addressOffset>0x0000040C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DCONNIS</name>
              <description>Device Connection Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DDISCIS</name>
              <description>Device Disconnection Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIS</name>
              <description>USB Reset Sent Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSMEDIS</name>
              <description>Downstream Resume Sent Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSMIS</name>
              <description>Upstream Resume Received Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HSOFIS</name>
              <description>Host Start of Frame Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HWUPIS</name>
              <description>Host Wake-Up Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Set</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Set</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Set</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Set</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Set</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Set</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTIMR</name>
          <description>Host Global Interrupt Mask Register</description>
          <addressOffset>0x00000410</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DCONNIE</name>
              <description>Device Connection Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DDISCIE</name>
              <description>Device Disconnection Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTIE</name>
              <description>USB Reset Sent Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSMEDIE</name>
              <description>Downstream Resume Sent Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRSMIE</name>
              <description>Upstream Resume Received Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HSOFIE</name>
              <description>Host Start of Frame Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HWUPIE</name>
              <description>Host Wake-Up Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Pipe 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Pipe 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Pipe 2 Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Pipe 3 Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Pipe 4 Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Pipe 5 Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Pipe 6 Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Pipe 7 Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Pipe 8 Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Pipe 9 Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTIDR</name>
          <description>Host Global Interrupt Disable Register</description>
          <addressOffset>0x00000414</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DCONNIEC</name>
              <description>Device Connection Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DDISCIEC</name>
              <description>Device Disconnection Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIEC</name>
              <description>USB Reset Sent Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSMEDIEC</name>
              <description>Downstream Resume Sent Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSMIEC</name>
              <description>Upstream Resume Received Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HSOFIEC</name>
              <description>Host Start of Frame Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HWUPIEC</name>
              <description>Host Wake-Up Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Pipe 0 Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Pipe 1 Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Pipe 2 Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Pipe 3 Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Pipe 4 Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Pipe 5 Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Pipe 6 Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Pipe 7 Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Pipe 8 Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Pipe 9 Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTIER</name>
          <description>Host Global Interrupt Enable Register</description>
          <addressOffset>0x00000418</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DCONNIES</name>
              <description>Device Connection Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DDISCIES</name>
              <description>Device Disconnection Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIES</name>
              <description>USB Reset Sent Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSMEDIES</name>
              <description>Downstream Resume Sent Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSMIES</name>
              <description>Upstream Resume Received Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HSOFIES</name>
              <description>Host Start of Frame Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HWUPIES</name>
              <description>Host Wake-Up Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_0</name>
              <description>Pipe 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_1</name>
              <description>Pipe 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_2</name>
              <description>Pipe 2 Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_3</name>
              <description>Pipe 3 Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_4</name>
              <description>Pipe 4 Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_5</name>
              <description>Pipe 5 Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_6</name>
              <description>Pipe 6 Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_7</name>
              <description>Pipe 7 Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_8</name>
              <description>Pipe 8 Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEP_9</name>
              <description>Pipe 9 Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_1</name>
              <description>DMA Channel 1 Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_2</name>
              <description>DMA Channel 2 Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_3</name>
              <description>DMA Channel 3 Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_4</name>
              <description>DMA Channel 4 Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_5</name>
              <description>DMA Channel 5 Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMA_6</name>
              <description>DMA Channel 6 Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTPIP</name>
          <description>Host Pipe Register</description>
          <addressOffset>0x0000041C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PEN0</name>
              <description>Pipe 0 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN1</name>
              <description>Pipe 1 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN2</name>
              <description>Pipe 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN3</name>
              <description>Pipe 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN4</name>
              <description>Pipe 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN5</name>
              <description>Pipe 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN6</name>
              <description>Pipe 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN7</name>
              <description>Pipe 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PEN8</name>
              <description>Pipe 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST0</name>
              <description>Pipe 0 Reset</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST1</name>
              <description>Pipe 1 Reset</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST2</name>
              <description>Pipe 2 Reset</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST3</name>
              <description>Pipe 3 Reset</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST4</name>
              <description>Pipe 4 Reset</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST5</name>
              <description>Pipe 5 Reset</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST6</name>
              <description>Pipe 6 Reset</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST7</name>
              <description>Pipe 7 Reset</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRST8</name>
              <description>Pipe 8 Reset</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTFNUM</name>
          <description>Host Frame Number Register</description>
          <addressOffset>0x00000420</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFNUM</name>
              <description>Micro Frame Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FNUM</name>
              <description>Frame Number</description>
              <bitOffset>3</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FLENHIGH</name>
              <description>Frame Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTADDR1</name>
          <description>Host Address 1 Register</description>
          <addressOffset>0x00000424</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HSTADDRP0</name>
              <description>USB Host Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP1</name>
              <description>USB Host Address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP2</name>
              <description>USB Host Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP3</name>
              <description>USB Host Address</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTADDR2</name>
          <description>Host Address 2 Register</description>
          <addressOffset>0x00000428</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HSTADDRP4</name>
              <description>USB Host Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP5</name>
              <description>USB Host Address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP6</name>
              <description>USB Host Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP7</name>
              <description>USB Host Address</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTADDR3</name>
          <description>Host Address 3 Register</description>
          <addressOffset>0x0000042C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HSTADDRP8</name>
              <description>USB Host Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSTADDRP9</name>
              <description>USB Host Address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPCFG%s</name>
          <description>Host Pipe Configuration Register (n = 0)</description>
          <addressOffset>0x00000500</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>ALLOC</name>
              <description>Pipe Memory Allocate</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PBK</name>
              <description>Pipe Banks</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BANK</name>
                  <description>Single-bank pipe</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BANK</name>
                  <description>Double-bank pipe</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BANK</name>
                  <description>Triple-bank pipe</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PSIZE</name>
              <description>Pipe Size</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BYTE</name>
                  <description>8 bytes</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16_BYTE</name>
                  <description>16 bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32_BYTE</name>
                  <description>32 bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64_BYTE</name>
                  <description>64 bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128_BYTE</name>
                  <description>128 bytes</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256_BYTE</name>
                  <description>256 bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512_BYTE</name>
                  <description>512 bytes</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024_BYTE</name>
                  <description>1024 bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PTOKEN</name>
              <description>Pipe Token</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SETUP</name>
                  <description>SETUP</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IN</name>
                  <description>IN</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUT</name>
                  <description>OUT</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AUTOSW</name>
              <description>Automatic Switch</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PTYPE</name>
              <description>Pipe Type</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CTRL</name>
                  <description>Control</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO</name>
                  <description>Isochronous</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BLK</name>
                  <description>Bulk</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INTRPT</name>
                  <description>Interrupt</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PEPNUM</name>
              <description>Pipe Endpoint Number</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PINGEN</name>
              <description>Ping Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INTFRQ</name>
              <description>Pipe Interrupt Request Frequency</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BINTERVAL</name>
              <description>bInterval parameter for the Bulk-Out/Ping transaction</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPISR%s</name>
          <description>Host Pipe Status Register (n = 0)</description>
          <addressOffset>0x00000530</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXINI</name>
              <description>Received IN Data Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXOUTI</name>
              <description>Transmitted OUT Data Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSTPI</name>
              <description>Transmitted SETUP Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDERFI</name>
              <description>Underflow Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PERRI</name>
              <description>Pipe Error Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKEDI</name>
              <description>NAKed Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVERFI</name>
              <description>Overflow Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSTALLDI</name>
              <description>Received STALLed Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CRCERRI</name>
              <description>CRC Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SHORTPACKETI</name>
              <description>Short Packet Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTSEQ</name>
              <description>Data Toggle Sequence</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DATA0</name>
                  <description>Data0 toggle sequence</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DATA1</name>
                  <description>Data1 toggle sequence</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBUSYBK</name>
              <description>Number of Busy Banks</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>0_BUSY</name>
                  <description>0 busy bank (all banks free)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BUSY</name>
                  <description>1 busy bank</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BUSY</name>
                  <description>2 busy banks</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BUSY</name>
                  <description>3 busy banks</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CURRBK</name>
              <description>Current Bank</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BANK0</name>
                  <description>Current bank is bank0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BANK1</name>
                  <description>Current bank is bank1</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BANK2</name>
                  <description>Current bank is bank2</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RWALL</name>
              <description>Read-write Allowed</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFGOK</name>
              <description>Configuration OK Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PBYCT</name>
              <description>Pipe Byte Count</description>
              <bitOffset>20</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPICR%s</name>
          <description>Host Pipe Clear Register (n = 0)</description>
          <addressOffset>0x00000560</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXINIC</name>
              <description>Received IN Data Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXOUTIC</name>
              <description>Transmitted OUT Data Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSTPIC</name>
              <description>Transmitted SETUP Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIC</name>
              <description>Underflow Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKEDIC</name>
              <description>NAKed Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIC</name>
              <description>Overflow Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTALLDIC</name>
              <description>Received STALLed Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRIC</name>
              <description>CRC Error Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETIC</name>
              <description>Short Packet Interrupt Clear</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPIFR%s</name>
          <description>Host Pipe Set Register (n = 0)</description>
          <addressOffset>0x00000590</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXINIS</name>
              <description>Received IN Data Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXOUTIS</name>
              <description>Transmitted OUT Data Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSTPIS</name>
              <description>Transmitted SETUP Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIS</name>
              <description>Underflow Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PERRIS</name>
              <description>Pipe Error Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKEDIS</name>
              <description>NAKed Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIS</name>
              <description>Overflow Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTALLDIS</name>
              <description>Received STALLed Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRIS</name>
              <description>CRC Error Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETIS</name>
              <description>Short Packet Interrupt Set</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKS</name>
              <description>Number of Busy Banks Set</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPIMR%s</name>
          <description>Host Pipe Mask Register (n = 0)</description>
          <addressOffset>0x000005C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXINE</name>
              <description>Received IN Data Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXOUTE</name>
              <description>Transmitted OUT Data Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSTPE</name>
              <description>Transmitted SETUP Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDERFIE</name>
              <description>Underflow Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PERRE</name>
              <description>Pipe Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NAKEDE</name>
              <description>NAKed Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVERFIE</name>
              <description>Overflow Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSTALLDE</name>
              <description>Received STALLed Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CRCERRE</name>
              <description>CRC Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SHORTPACKETIE</name>
              <description>Short Packet Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NBUSYBKE</name>
              <description>Number of Busy Banks Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOCON</name>
              <description>FIFO Control</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PDISHDMA</name>
              <description>Pipe Interrupts Disable HDMA Request Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PFREEZE</name>
              <description>Pipe Freeze</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTDT</name>
              <description>Reset Data Toggle</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPIER%s</name>
          <description>Host Pipe Enable Register (n = 0)</description>
          <addressOffset>0x000005F0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXINES</name>
              <description>Received IN Data Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXOUTES</name>
              <description>Transmitted OUT Data Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSTPES</name>
              <description>Transmitted SETUP Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIES</name>
              <description>Underflow Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PERRES</name>
              <description>Pipe Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKEDES</name>
              <description>NAKed Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIES</name>
              <description>Overflow Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTALLDES</name>
              <description>Received STALLed Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERRES</name>
              <description>CRC Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETIES</name>
              <description>Short Packet Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKES</name>
              <description>Number of Busy Banks Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PDISHDMAS</name>
              <description>Pipe Interrupts Disable HDMA Request Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PFREEZES</name>
              <description>Pipe Freeze Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTDTS</name>
              <description>Reset Data Toggle Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPIDR%s</name>
          <description>Host Pipe Disable Register (n = 0)</description>
          <addressOffset>0x00000620</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXINEC</name>
              <description>Received IN Data Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXOUTEC</name>
              <description>Transmitted OUT Data Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSTPEC</name>
              <description>Transmitted SETUP Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDERFIEC</name>
              <description>Underflow Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PERREC</name>
              <description>Pipe Error Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NAKEDEC</name>
              <description>NAKed Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVERFIEC</name>
              <description>Overflow Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSTALLDEC</name>
              <description>Received STALLed Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CRCERREC</name>
              <description>CRC Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SHORTPACKETIEC</name>
              <description>Short Packet Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NBUSYBKEC</name>
              <description>Number of Busy Banks Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOCONC</name>
              <description>FIFO Control Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PDISHDMAC</name>
              <description>Pipe Interrupts Disable HDMA Request Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PFREEZEC</name>
              <description>Pipe Freeze Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPINRQ%s</name>
          <description>Host Pipe IN Request Register (n = 0)</description>
          <addressOffset>0x00000650</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>INRQ</name>
              <description>IN Request Number before Freeze</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INMODE</name>
              <description>IN Request Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>HSTPIPERR%s</name>
          <description>Host Pipe Error Register (n = 0)</description>
          <addressOffset>0x00000680</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATATGL</name>
              <description>Data Toggle Error</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATAPID</name>
              <description>Data PID Error</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PID</name>
              <description>PID Error</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-Out Error</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CRC16</name>
              <description>CRC16 Error</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>COUNTER</name>
              <description>Error Counter</description>
              <bitOffset>5</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC1</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 1)</description>
          <addressOffset>0x00000710</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS1</name>
          <description>Host DMA Channel Address Register (n = 1)</description>
          <addressOffset>0x00000714</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL1</name>
          <description>Host DMA Channel Control Register (n = 1)</description>
          <addressOffset>0x00000718</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS1</name>
          <description>Host DMA Channel Status Register (n = 1)</description>
          <addressOffset>0x0000071C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC2</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 2)</description>
          <addressOffset>0x00000720</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS2</name>
          <description>Host DMA Channel Address Register (n = 2)</description>
          <addressOffset>0x00000724</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL2</name>
          <description>Host DMA Channel Control Register (n = 2)</description>
          <addressOffset>0x00000728</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS2</name>
          <description>Host DMA Channel Status Register (n = 2)</description>
          <addressOffset>0x0000072C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC3</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 3)</description>
          <addressOffset>0x00000730</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS3</name>
          <description>Host DMA Channel Address Register (n = 3)</description>
          <addressOffset>0x00000734</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL3</name>
          <description>Host DMA Channel Control Register (n = 3)</description>
          <addressOffset>0x00000738</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS3</name>
          <description>Host DMA Channel Status Register (n = 3)</description>
          <addressOffset>0x0000073C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC4</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 4)</description>
          <addressOffset>0x00000740</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS4</name>
          <description>Host DMA Channel Address Register (n = 4)</description>
          <addressOffset>0x00000744</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL4</name>
          <description>Host DMA Channel Control Register (n = 4)</description>
          <addressOffset>0x00000748</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS4</name>
          <description>Host DMA Channel Status Register (n = 4)</description>
          <addressOffset>0x0000074C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC5</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 5)</description>
          <addressOffset>0x00000750</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS5</name>
          <description>Host DMA Channel Address Register (n = 5)</description>
          <addressOffset>0x00000754</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL5</name>
          <description>Host DMA Channel Control Register (n = 5)</description>
          <addressOffset>0x00000758</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS5</name>
          <description>Host DMA Channel Status Register (n = 5)</description>
          <addressOffset>0x0000075C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC6</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 6)</description>
          <addressOffset>0x00000760</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS6</name>
          <description>Host DMA Channel Address Register (n = 6)</description>
          <addressOffset>0x00000764</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL6</name>
          <description>Host DMA Channel Control Register (n = 6)</description>
          <addressOffset>0x00000768</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS6</name>
          <description>Host DMA Channel Status Register (n = 6)</description>
          <addressOffset>0x0000076C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMANXTDSC7</name>
          <description>Host DMA Channel Next Descriptor Address Register (n = 7)</description>
          <addressOffset>0x00000770</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NXT_DSC_ADD</name>
              <description>Next Descriptor Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMAADDRESS7</name>
          <description>Host DMA Channel Address Register (n = 7)</description>
          <addressOffset>0x00000774</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUFF_ADD</name>
              <description>Buffer Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMACONTROL7</name>
          <description>Host DMA Channel Control Register (n = 7)</description>
          <addressOffset>0x00000778</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDNXT_DSC</name>
              <description>Load Next Channel Transfer Descriptor Enable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_EN</name>
              <description>End of Transfer Enable (Control)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_B_EN</name>
              <description>End of Buffer Enable Control</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_IT</name>
              <description>End of Transfer Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BUFFIT</name>
              <description>End of Buffer Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LD_IT</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST_LCK</name>
              <description>Burst Lock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_LENGTH</name>
              <description>Buffer Byte Length (Write-only)</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HSTDMASTATUS7</name>
          <description>Host DMA Channel Status Register (n = 7)</description>
          <addressOffset>0x0000077C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHANN_ENB</name>
              <description>Channel Enable Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHANN_ACT</name>
              <description>Channel Active Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_TR_ST</name>
              <description>End of Channel Transfer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>END_BF_ST</name>
              <description>End of Channel Buffer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DESC_LDST</name>
              <description>Descriptor Loaded Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BUFF_COUNT</name>
              <description>Buffer Byte Count</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL</name>
          <description>General Control Register</description>
          <addressOffset>0x00000800</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x03004000</resetValue>
          <fields>
            <field>
              <name>IDTE</name>
              <description>ID Transition Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VBUSTE</name>
              <description>VBus Transition Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRPE</name>
              <description>SRP Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VBERRE</name>
              <description>VBus Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BCERRE</name>
              <description>B-Connection Error Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ROLEEXE</name>
              <description>Role Exchange Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HNPERRE</name>
              <description>HNP Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STOE</name>
              <description>Suspend Time-Out Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VBUSHWC</name>
              <description>VBus Hardware Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRPSEL</name>
              <description>SRP Selection</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRPREQ</name>
              <description>SRP Request</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HNPREQ</name>
              <description>HNP Request</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OTGPADE</name>
              <description>OTG Pad Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VBUSPO</name>
              <description>VBus Polarity Off</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FRZCLK</name>
              <description>Freeze USB Clock</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USBE</name>
              <description>UOTGHS Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMVALUE</name>
              <description>Timer Value</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMPAGE</name>
              <description>Timer Page</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UNLOCK</name>
              <description>Timer Access Unlock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UIDE</name>
              <description>UOTGID Pin Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UIMOD</name>
                  <description>The USB mode (device/host) is selected from the UIMOD bit.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UOTGID</name>
                  <description>The USB mode (device/host) is selected from the UOTGID input pin.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UIMOD</name>
              <description>UOTGHS Mode</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Host</name>
                  <description>The module is in USB host mode.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Device</name>
                  <description>The module is in USB device mode.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>General Status Register</description>
          <addressOffset>0x00000804</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000400</resetValue>
          <fields>
            <field>
              <name>IDTI</name>
              <description>ID Transition Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>VBUSTI</name>
              <description>VBus Transition Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SRPI</name>
              <description>SRP Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>VBERRI</name>
              <description>VBus Error Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BCERRI</name>
              <description>B-Connection Error Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ROLEEXI</name>
              <description>Role Exchange Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HNPERRI</name>
              <description>HNP Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STOI</name>
              <description>Suspend Time-Out Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>VBUSRQ</name>
              <description>VBus Request</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ID</name>
              <description>UOTGID Pin State</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>VBUS</name>
              <description>VBus Level</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPEED</name>
              <description>Speed Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FULL_SPEED</name>
                  <description>Full-Speed mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH_SPEED</name>
                  <description>High-Speed mode</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_SPEED</name>
                  <description>Low-Speed mode</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKUSABLE</name>
              <description>UTMI Clock Usable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCR</name>
          <description>General Status Clear Register</description>
          <addressOffset>0x00000808</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDTIC</name>
              <description>ID Transition Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBUSTIC</name>
              <description>VBus Transition Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SRPIC</name>
              <description>SRP Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBERRIC</name>
              <description>VBus Error Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BCERRIC</name>
              <description>B-Connection Error Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ROLEEXIC</name>
              <description>Role Exchange Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HNPERRIC</name>
              <description>HNP Error Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOIC</name>
              <description>Suspend Time-Out Interrupt Clear</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBUSRQC</name>
              <description>VBus Request Clear</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SFR</name>
          <description>General Status Set Register</description>
          <addressOffset>0x0000080C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>IDTIS</name>
              <description>ID Transition Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBUSTIS</name>
              <description>VBus Transition Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SRPIS</name>
              <description>SRP Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBERRIS</name>
              <description>VBus Error Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BCERRIS</name>
              <description>B-Connection Error Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ROLEEXIS</name>
              <description>Role Exchange Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HNPERRIS</name>
              <description>HNP Error Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOIS</name>
              <description>Suspend Time-Out Interrupt Set</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>VBUSRQS</name>
              <description>VBus Request Set</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FSM</name>
          <description>General Finite State Machine Register</description>
          <addressOffset>0x0000082C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000009</resetValue>
          <fields>
            <field>
              <name>DRDSTATE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>A_IDLESTATE</name>
                  <description>This is the start state for A-devices (when the ID pin is 0)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_WAIT_VRISE</name>
                  <description>In this state, the A-device waits for the voltage on VBus to rise above the A-device VBus Valid threshold (4.4 V).</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_WAIT_BCON</name>
                  <description>In this state, the A-device waits for the B-device to signal a connection.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_HOST</name>
                  <description>In this state, the A-device that operates in Host mode is operational.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_SUSPEND</name>
                  <description>The A-device operating as a host is in the suspend mode.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_PERIPHERAL</name>
                  <description>The A-device operates as a peripheral.</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_WAIT_VFALL</name>
                  <description>In this state, the A-device waits for the voltage on VBus to drop below the A-device Session Valid threshold (1.4 V).</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_VBUS_ERR</name>
                  <description>In this state, the A-device waits for recovery of the over-current condition that caused it to enter this state.</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>A_WAIT_DISCHARGE</name>
                  <description>In this state, the A-device waits for the data USB line to discharge (100 us).</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_IDLE</name>
                  <description>This is the start state for B-device (when the ID pin is 1).</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_PERIPHERAL</name>
                  <description>In this state, the B-device acts as the peripheral.</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_WAIT_BEGIN_HNP</name>
                  <description>In this state, the B-device is in suspend mode and waits until 3 ms before initiating the HNP protocol if requested.</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_WAIT_DISCHARGE</name>
                  <description>In this state, the B-device waits for the data USB line to discharge (100 us) before becoming Host.</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_WAIT_ACON</name>
                  <description>In this state, the B-device waits for the A-device to signal a connect before becoming B-Host.</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_HOST</name>
                  <description>In this state, the B-device acts as the Host.</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B_SRP_INIT</name>
                  <description>In this state, the B-device attempts to start a session using the SRP protocol.</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>EMAC</name>
      <version>6119I</version>
      <description>Ethernet MAC 10/100</description>
      <prependToName>EMAC_</prependToName>
      <baseAddress>0x400B0000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_EMAC</name>
        <value>42</value>
      </interrupt>
      <registers>
        <register>
          <name>NCR</name>
          <description>Network Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LB</name>
              <description>LoopBack</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LLB</name>
              <description>Loopback local</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RE</name>
              <description>Receive enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TE</name>
              <description>Transmit enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MPE</name>
              <description>Management port enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLRSTAT</name>
              <description>Clear statistics registers</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INCSTAT</name>
              <description>Increment statistics registers</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WESTAT</name>
              <description>Write enable for statistics registers</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BP</name>
              <description>Back pressure</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TSTART</name>
              <description>Start transmission</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>THALT</name>
              <description>Transmit halt</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NCFGR</name>
          <description>Network Configuration Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000800</resetValue>
          <fields>
            <field>
              <name>SPD</name>
              <description>Speed</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FD</name>
              <description>Full Duplex</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>JFRAME</name>
              <description>Jumbo Frames</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CAF</name>
              <description>Copy All Frames</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NBC</name>
              <description>No Broadcast</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MTI</name>
              <description>Multicast Hash Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UNI</name>
              <description>Unicast Hash Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BIG</name>
              <description>Receive 1536 bytes frames</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLK</name>
              <description>MDC clock divider</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK_8</name>
                  <description>MCK divided by 8 (MCK up to 20 MHz).</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_16</name>
                  <description>MCK divided by 16 (MCK up to 40 MHz).</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_32</name>
                  <description>MCK divided by 32 (MCK up to 80 MHz).</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_64</name>
                  <description>MCK divided by 64 (MCK up to 160 MHz).</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RTY</name>
              <description>Retry test</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAE</name>
              <description>Pause Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBOF</name>
              <description>Receive Buffer Offset</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OFFSET_0</name>
                  <description>No offset from start of receive buffer.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OFFSET_1</name>
                  <description>One-byte offset from start of receive buffer.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OFFSET_2</name>
                  <description>Two-byte offset from start of receive buffer.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OFFSET_3</name>
                  <description>Three-byte offset from start of receive buffer.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RLCE</name>
              <description>Receive Length field Checking Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRFCS</name>
              <description>Discard Receive FCS</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EFRHD</name>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IRXFCS</name>
              <description>Ignore RX FCS</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NSR</name>
          <description>Network Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>MDIO</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>IDLE</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TSR</name>
          <description>Transmit Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UBR</name>
              <description>Used Bit Read</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>COL</name>
              <description>Collision Occurred</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RLES</name>
              <description>Retry Limit exceeded</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TGO</name>
              <description>Transmit Go</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BEX</name>
              <description>Buffers exhausted mid frame</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>COMP</name>
              <description>Transmit Complete</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UND</name>
              <description>Transmit Underrun</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RBQP</name>
          <description>Receive Buffer Queue Pointer Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <description>Receive buffer queue pointer address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TBQP</name>
          <description>Transmit Buffer Queue Pointer Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <description>Transmit buffer queue pointer address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RSR</name>
          <description>Receive Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BNA</name>
              <description>Buffer Not Available</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>REC</name>
              <description>Frame Received</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVR</name>
              <description>Receive Overrun</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFD</name>
              <description>Management Frame Done</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCOMP</name>
              <description>Receive Complete</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXUBR</name>
              <description>Receive Used Bit Read</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXUBR</name>
              <description>Transmit Used Bit Read</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TUND</name>
              <description>Ethernet Transmit Buffer Underrun</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RLEX</name>
              <description>Retry Limit Exceeded</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXERR</name>
              <description>Transmit Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TCOMP</name>
              <description>Transmit Complete</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ROVR</name>
              <description>Receive Overrun</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HRESP</name>
              <description>Hresp not OK</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PFRE</name>
              <description>Pause Frame Received</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PTZ</name>
              <description>Pause Time Zero</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MFD</name>
              <description>Management Frame sent</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCOMP</name>
              <description>Receive Complete</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXUBR</name>
              <description>Receive Used Bit Read</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXUBR</name>
              <description>Transmit Used Bit Read</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TUND</name>
              <description>Ethernet Transmit Buffer Underrun</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RLE</name>
              <description>Retry Limit Exceeded</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXERR</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TCOMP</name>
              <description>Transmit Complete</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ROVR</name>
              <description>Receive Overrun</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HRESP</name>
              <description>Hresp not OK</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PFR</name>
              <description>Pause Frame Received</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PTZ</name>
              <description>Pause Time Zero</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MFD</name>
              <description>Management Frame sent</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCOMP</name>
              <description>Receive Complete</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXUBR</name>
              <description>Receive Used Bit Read</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXUBR</name>
              <description>Transmit Used Bit Read</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TUND</name>
              <description>Ethernet Transmit Buffer Underrun</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RLE</name>
              <description>Retry Limit Exceeded</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXERR</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TCOMP</name>
              <description>Transmit Complete</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ROVR</name>
              <description>Receive Overrun</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>HRESP</name>
              <description>Hresp not OK</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PFR</name>
              <description>Pause Frame Received</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PTZ</name>
              <description>Pause Time Zero</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00003FFF</resetValue>
          <fields>
            <field>
              <name>MFD</name>
              <description>Management Frame sent</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RCOMP</name>
              <description>Receive Complete</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXUBR</name>
              <description>Receive Used Bit Read</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXUBR</name>
              <description>Transmit Used Bit Read</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TUND</name>
              <description>Ethernet Transmit Buffer Underrun</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RLE</name>
              <description>Retry Limit Exceeded</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXERR</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TCOMP</name>
              <description>Transmit Complete</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ROVR</name>
              <description>Receive Overrun</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>HRESP</name>
              <description>Hresp not OK</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PFR</name>
              <description>Pause Frame Received</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PTZ</name>
              <description>Pause Time Zero</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Phy Maintenance Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATA</name>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CODE</name>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>REGA</name>
              <description>Register Address</description>
              <bitOffset>18</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PHYA</name>
              <description>PHY Address</description>
              <bitOffset>23</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RW</name>
              <description>Read-write</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOF</name>
              <description>Start of frame</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTR</name>
          <description>Pause Time Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PTIME</name>
              <description>Pause Time</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PFR</name>
          <description>Pause Frames Received Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FROK</name>
              <description>Pause Frames received OK</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FTO</name>
          <description>Frames Transmitted Ok Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FTOK</name>
              <description>Frames Transmitted OK</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCF</name>
          <description>Single Collision Frames Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCF</name>
              <description>Single Collision Frames</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCF</name>
          <description>Multiple Collision Frames Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MCF</name>
              <description>Multicollision Frames</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRO</name>
          <description>Frames Received Ok Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FROK</name>
              <description>Frames Received OK</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FCSE</name>
          <description>Frame Check Sequence Errors Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FCSE</name>
              <description>Frame Check Sequence Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ALE</name>
          <description>Alignment Errors Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ALE</name>
              <description>Alignment Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTF</name>
          <description>Deferred Transmission Frames Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTF</name>
              <description>Deferred Transmission Frames</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCOL</name>
          <description>Late Collisions Register</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LCOL</name>
              <description>Late Collisions</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECOL</name>
          <description>Excessive Collisions Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EXCOL</name>
              <description>Excessive Collisions</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TUND</name>
          <description>Transmit Underrun Errors Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TUND</name>
              <description>Transmit Underruns</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSE</name>
          <description>Carrier Sense Errors Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CSE</name>
              <description>Carrier Sense Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RRE</name>
          <description>Receive Resource Errors Register</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RRE</name>
              <description>Receive Resource Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ROV</name>
          <description>Receive Overrun Errors Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ROVR</name>
              <description>Receive Overrun</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RSE</name>
          <description>Receive Symbol Errors Register</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RSE</name>
              <description>Receive Symbol Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELE</name>
          <description>Excessive Length Errors Register</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EXL</name>
              <description>Excessive Length Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RJA</name>
          <description>Receive Jabbers Register</description>
          <addressOffset>0x0000007C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RJB</name>
              <description>Receive Jabbers</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>USF</name>
          <description>Undersize Frames Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USF</name>
              <description>Undersize frames</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>STE</name>
          <description>SQE Test Errors Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SQER</name>
              <description>SQE test errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RLE</name>
          <description>Received Length Field Mismatch Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RLFM</name>
              <description>Receive Length Field Mismatch</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HRB</name>
          <description>Hash Register Bottom [31:0] Register</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HRT</name>
          <description>Hash Register Top [63:32] Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA1B</name>
          <description>Specific Address 1 Bottom Register</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA1T</name>
          <description>Specific Address 1 Top Register</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA2B</name>
          <description>Specific Address 2 Bottom Register</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA2T</name>
          <description>Specific Address 2 Top Register</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA3B</name>
          <description>Specific Address 3 Bottom Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA3T</name>
          <description>Specific Address 3 Top Register</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA4B</name>
          <description>Specific Address 4 Bottom Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SA4T</name>
          <description>Specific Address 4 Top Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TID</name>
          <description>Type ID Checking Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TID</name>
              <description>Type ID checking</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>USRIO</name>
          <description>User Input/Output Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RMII</name>
              <description>Reduce MII</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKEN</name>
              <description>Clock Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CAN0</name>
      <version>6019N</version>
      <description>Controller Area Network 0</description>
      <groupName>CAN</groupName>
      <prependToName>CAN0_</prependToName>
      <baseAddress>0x400B4000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_CAN0</name>
        <value>43</value>
      </interrupt>
      <registers>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CANEN</name>
              <description>CAN Controller Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LPM</name>
              <description>Disable/Enable Low Power Mode</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ABM</name>
              <description>Disable/Enable Autobaud/Listen mode</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVL</name>
              <description>Disable/Enable Overload Frame</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TEOF</name>
              <description>Timestamp messages at each end of Frame</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TTM</name>
              <description>Disable/Enable Time Triggered Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMFRZ</name>
              <description>Enable Timer Freeze</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRPT</name>
              <description>Disable Repeat</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXSYNC</name>
              <description>Reception Synchronization Stage (not readable)</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DOUBLE_PP</name>
                  <description>Rx Signal with Double Synchro Stages (2 Positive Edges)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DOUBLE_PN</name>
                  <description>Rx Signal with Double Synchro Stages (One Positive Edge and One Negative Edge)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SINGLE_P</name>
                  <description>Rx Signal with Single Synchro Stage (Positive Edge)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>Rx Signal with No Synchro Stage</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>TimeStamp Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>TimeStamp Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>Timestamp Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Event</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Event</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Event</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Event</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Event</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Event</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Event</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Event</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>CAN controller in Low power Mode</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>CAN controller is not in Low power Mode</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>Mailbox CRC Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Mailbox Stuffing Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RBSY</name>
              <description>Receiver busy</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TBSY</name>
              <description>Transmitter busy</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVLSY</name>
              <description>Overload busy</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BR</name>
          <description>Baudrate Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PHASE2</name>
              <description>Phase 2 segment</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PHASE1</name>
              <description>Phase 1 segment</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PROPAG</name>
              <description>Programming time segment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SJW</name>
              <description>Re-synchronization jump width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BRP</name>
              <description>Baudrate Prescaler.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SMP</name>
              <description>Sampling Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ONCE</name>
                  <description>The incoming bit stream is sampled once at sample point.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>THREE</name>
                  <description>The incoming bit stream is sampled three times with a period of a MCK clock period, centered on sample point.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TIM</name>
          <description>Timer Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMER</name>
              <description>Timer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMESTP</name>
          <description>Timestamp Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timestamp</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECR</name>
          <description>Error Counter Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REC</name>
              <description>Receive Error Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TEC</name>
              <description>Transmit Error Counter</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transfer Command Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Transfer Request for Mailbox 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Transfer Request for Mailbox 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Transfer Request for Mailbox 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Transfer Request for Mailbox 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Transfer Request for Mailbox 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Transfer Request for Mailbox 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Transfer Request for Mailbox 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Transfer Request for Mailbox 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMRST</name>
              <description>Timer Reset</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ACR</name>
          <description>Abort Command Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Abort Request for Mailbox 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Abort Request for Mailbox 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Abort Request for Mailbox 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Abort Request for Mailbox 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Abort Request for Mailbox 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Abort Request for Mailbox 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Abort Request for Mailbox 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Abort Request for Mailbox 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>SPI Write Protection Key Password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR0</name>
          <description>Mailbox Mode Register (MB = 0)</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM0</name>
          <description>Mailbox Acceptance Mask Register (MB = 0)</description>
          <addressOffset>0x00000204</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID0</name>
          <description>Mailbox ID Register (MB = 0)</description>
          <addressOffset>0x00000208</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID0</name>
          <description>Mailbox Family ID Register (MB = 0)</description>
          <addressOffset>0x0000020C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR0</name>
          <description>Mailbox Status Register (MB = 0)</description>
          <addressOffset>0x00000210</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL0</name>
          <description>Mailbox Data Low Register (MB = 0)</description>
          <addressOffset>0x00000214</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH0</name>
          <description>Mailbox Data High Register (MB = 0)</description>
          <addressOffset>0x00000218</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR0</name>
          <description>Mailbox Control Register (MB = 0)</description>
          <addressOffset>0x0000021C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR1</name>
          <description>Mailbox Mode Register (MB = 1)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM1</name>
          <description>Mailbox Acceptance Mask Register (MB = 1)</description>
          <addressOffset>0x00000224</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID1</name>
          <description>Mailbox ID Register (MB = 1)</description>
          <addressOffset>0x00000228</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID1</name>
          <description>Mailbox Family ID Register (MB = 1)</description>
          <addressOffset>0x0000022C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR1</name>
          <description>Mailbox Status Register (MB = 1)</description>
          <addressOffset>0x00000230</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL1</name>
          <description>Mailbox Data Low Register (MB = 1)</description>
          <addressOffset>0x00000234</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH1</name>
          <description>Mailbox Data High Register (MB = 1)</description>
          <addressOffset>0x00000238</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR1</name>
          <description>Mailbox Control Register (MB = 1)</description>
          <addressOffset>0x0000023C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR2</name>
          <description>Mailbox Mode Register (MB = 2)</description>
          <addressOffset>0x00000240</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM2</name>
          <description>Mailbox Acceptance Mask Register (MB = 2)</description>
          <addressOffset>0x00000244</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID2</name>
          <description>Mailbox ID Register (MB = 2)</description>
          <addressOffset>0x00000248</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID2</name>
          <description>Mailbox Family ID Register (MB = 2)</description>
          <addressOffset>0x0000024C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR2</name>
          <description>Mailbox Status Register (MB = 2)</description>
          <addressOffset>0x00000250</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL2</name>
          <description>Mailbox Data Low Register (MB = 2)</description>
          <addressOffset>0x00000254</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH2</name>
          <description>Mailbox Data High Register (MB = 2)</description>
          <addressOffset>0x00000258</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR2</name>
          <description>Mailbox Control Register (MB = 2)</description>
          <addressOffset>0x0000025C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR3</name>
          <description>Mailbox Mode Register (MB = 3)</description>
          <addressOffset>0x00000260</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM3</name>
          <description>Mailbox Acceptance Mask Register (MB = 3)</description>
          <addressOffset>0x00000264</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID3</name>
          <description>Mailbox ID Register (MB = 3)</description>
          <addressOffset>0x00000268</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID3</name>
          <description>Mailbox Family ID Register (MB = 3)</description>
          <addressOffset>0x0000026C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR3</name>
          <description>Mailbox Status Register (MB = 3)</description>
          <addressOffset>0x00000270</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL3</name>
          <description>Mailbox Data Low Register (MB = 3)</description>
          <addressOffset>0x00000274</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH3</name>
          <description>Mailbox Data High Register (MB = 3)</description>
          <addressOffset>0x00000278</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR3</name>
          <description>Mailbox Control Register (MB = 3)</description>
          <addressOffset>0x0000027C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR4</name>
          <description>Mailbox Mode Register (MB = 4)</description>
          <addressOffset>0x00000280</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM4</name>
          <description>Mailbox Acceptance Mask Register (MB = 4)</description>
          <addressOffset>0x00000284</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID4</name>
          <description>Mailbox ID Register (MB = 4)</description>
          <addressOffset>0x00000288</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID4</name>
          <description>Mailbox Family ID Register (MB = 4)</description>
          <addressOffset>0x0000028C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR4</name>
          <description>Mailbox Status Register (MB = 4)</description>
          <addressOffset>0x00000290</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL4</name>
          <description>Mailbox Data Low Register (MB = 4)</description>
          <addressOffset>0x00000294</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH4</name>
          <description>Mailbox Data High Register (MB = 4)</description>
          <addressOffset>0x00000298</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR4</name>
          <description>Mailbox Control Register (MB = 4)</description>
          <addressOffset>0x0000029C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR5</name>
          <description>Mailbox Mode Register (MB = 5)</description>
          <addressOffset>0x000002A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM5</name>
          <description>Mailbox Acceptance Mask Register (MB = 5)</description>
          <addressOffset>0x000002A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID5</name>
          <description>Mailbox ID Register (MB = 5)</description>
          <addressOffset>0x000002A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID5</name>
          <description>Mailbox Family ID Register (MB = 5)</description>
          <addressOffset>0x000002AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR5</name>
          <description>Mailbox Status Register (MB = 5)</description>
          <addressOffset>0x000002B0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL5</name>
          <description>Mailbox Data Low Register (MB = 5)</description>
          <addressOffset>0x000002B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH5</name>
          <description>Mailbox Data High Register (MB = 5)</description>
          <addressOffset>0x000002B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR5</name>
          <description>Mailbox Control Register (MB = 5)</description>
          <addressOffset>0x000002BC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR6</name>
          <description>Mailbox Mode Register (MB = 6)</description>
          <addressOffset>0x000002C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM6</name>
          <description>Mailbox Acceptance Mask Register (MB = 6)</description>
          <addressOffset>0x000002C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID6</name>
          <description>Mailbox ID Register (MB = 6)</description>
          <addressOffset>0x000002C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID6</name>
          <description>Mailbox Family ID Register (MB = 6)</description>
          <addressOffset>0x000002CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR6</name>
          <description>Mailbox Status Register (MB = 6)</description>
          <addressOffset>0x000002D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL6</name>
          <description>Mailbox Data Low Register (MB = 6)</description>
          <addressOffset>0x000002D4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH6</name>
          <description>Mailbox Data High Register (MB = 6)</description>
          <addressOffset>0x000002D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR6</name>
          <description>Mailbox Control Register (MB = 6)</description>
          <addressOffset>0x000002DC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR7</name>
          <description>Mailbox Mode Register (MB = 7)</description>
          <addressOffset>0x000002E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM7</name>
          <description>Mailbox Acceptance Mask Register (MB = 7)</description>
          <addressOffset>0x000002E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID7</name>
          <description>Mailbox ID Register (MB = 7)</description>
          <addressOffset>0x000002E8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID7</name>
          <description>Mailbox Family ID Register (MB = 7)</description>
          <addressOffset>0x000002EC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR7</name>
          <description>Mailbox Status Register (MB = 7)</description>
          <addressOffset>0x000002F0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL7</name>
          <description>Mailbox Data Low Register (MB = 7)</description>
          <addressOffset>0x000002F4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH7</name>
          <description>Mailbox Data High Register (MB = 7)</description>
          <addressOffset>0x000002F8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR7</name>
          <description>Mailbox Control Register (MB = 7)</description>
          <addressOffset>0x000002FC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CAN1</name>
      <version>6019N</version>
      <description>Controller Area Network 1</description>
      <groupName>CAN</groupName>
      <prependToName>CAN1_</prependToName>
      <baseAddress>0x400B8000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_CAN1</name>
        <value>44</value>
      </interrupt>
      <registers>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CANEN</name>
              <description>CAN Controller Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LPM</name>
              <description>Disable/Enable Low Power Mode</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ABM</name>
              <description>Disable/Enable Autobaud/Listen mode</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVL</name>
              <description>Disable/Enable Overload Frame</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TEOF</name>
              <description>Timestamp messages at each end of Frame</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TTM</name>
              <description>Disable/Enable Time Triggered Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMFRZ</name>
              <description>Enable Timer Freeze</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRPT</name>
              <description>Disable Repeat</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXSYNC</name>
              <description>Reception Synchronization Stage (not readable)</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DOUBLE_PP</name>
                  <description>Rx Signal with Double Synchro Stages (2 Positive Edges)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DOUBLE_PN</name>
                  <description>Rx Signal with Double Synchro Stages (One Positive Edge and One Negative Edge)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SINGLE_P</name>
                  <description>Rx Signal with Single Synchro Stage (Positive Edge)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>Rx Signal with No Synchro Stage</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>TimeStamp Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>TimeStamp Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Wakeup Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <description>Timestamp Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>CRC Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Stuffing Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MB0</name>
              <description>Mailbox 0 Event</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Mailbox 1 Event</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Mailbox 2 Event</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Mailbox 3 Event</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Mailbox 4 Event</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Mailbox 5 Event</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Mailbox 6 Event</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Mailbox 7 Event</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRA</name>
              <description>Error Active Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WARN</name>
              <description>Warning Limit</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERRP</name>
              <description>Error Passive Mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BOFF</name>
              <description>Bus Off Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SLEEP</name>
              <description>CAN controller in Low power Mode</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>CAN controller is not in Low power Mode</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TOVF</name>
              <description>Timer Overflow</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TSTP</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CERR</name>
              <description>Mailbox CRC Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SERR</name>
              <description>Mailbox Stuffing Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AERR</name>
              <description>Acknowledgment Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FERR</name>
              <description>Form Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BERR</name>
              <description>Bit Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RBSY</name>
              <description>Receiver busy</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TBSY</name>
              <description>Transmitter busy</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVLSY</name>
              <description>Overload busy</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BR</name>
          <description>Baudrate Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PHASE2</name>
              <description>Phase 2 segment</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PHASE1</name>
              <description>Phase 1 segment</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PROPAG</name>
              <description>Programming time segment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SJW</name>
              <description>Re-synchronization jump width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BRP</name>
              <description>Baudrate Prescaler.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SMP</name>
              <description>Sampling Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ONCE</name>
                  <description>The incoming bit stream is sampled once at sample point.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>THREE</name>
                  <description>The incoming bit stream is sampled three times with a period of a MCK clock period, centered on sample point.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TIM</name>
          <description>Timer Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TIMER</name>
              <description>Timer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMESTP</name>
          <description>Timestamp Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timestamp</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECR</name>
          <description>Error Counter Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REC</name>
              <description>Receive Error Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TEC</name>
              <description>Transmit Error Counter</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transfer Command Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Transfer Request for Mailbox 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Transfer Request for Mailbox 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Transfer Request for Mailbox 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Transfer Request for Mailbox 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Transfer Request for Mailbox 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Transfer Request for Mailbox 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Transfer Request for Mailbox 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Transfer Request for Mailbox 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMRST</name>
              <description>Timer Reset</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ACR</name>
          <description>Abort Command Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MB0</name>
              <description>Abort Request for Mailbox 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB1</name>
              <description>Abort Request for Mailbox 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB2</name>
              <description>Abort Request for Mailbox 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB3</name>
              <description>Abort Request for Mailbox 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB4</name>
              <description>Abort Request for Mailbox 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB5</name>
              <description>Abort Request for Mailbox 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB6</name>
              <description>Abort Request for Mailbox 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MB7</name>
              <description>Abort Request for Mailbox 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>SPI Write Protection Key Password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR0</name>
          <description>Mailbox Mode Register (MB = 0)</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM0</name>
          <description>Mailbox Acceptance Mask Register (MB = 0)</description>
          <addressOffset>0x00000204</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID0</name>
          <description>Mailbox ID Register (MB = 0)</description>
          <addressOffset>0x00000208</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID0</name>
          <description>Mailbox Family ID Register (MB = 0)</description>
          <addressOffset>0x0000020C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR0</name>
          <description>Mailbox Status Register (MB = 0)</description>
          <addressOffset>0x00000210</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL0</name>
          <description>Mailbox Data Low Register (MB = 0)</description>
          <addressOffset>0x00000214</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH0</name>
          <description>Mailbox Data High Register (MB = 0)</description>
          <addressOffset>0x00000218</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR0</name>
          <description>Mailbox Control Register (MB = 0)</description>
          <addressOffset>0x0000021C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR1</name>
          <description>Mailbox Mode Register (MB = 1)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM1</name>
          <description>Mailbox Acceptance Mask Register (MB = 1)</description>
          <addressOffset>0x00000224</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID1</name>
          <description>Mailbox ID Register (MB = 1)</description>
          <addressOffset>0x00000228</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID1</name>
          <description>Mailbox Family ID Register (MB = 1)</description>
          <addressOffset>0x0000022C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR1</name>
          <description>Mailbox Status Register (MB = 1)</description>
          <addressOffset>0x00000230</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL1</name>
          <description>Mailbox Data Low Register (MB = 1)</description>
          <addressOffset>0x00000234</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH1</name>
          <description>Mailbox Data High Register (MB = 1)</description>
          <addressOffset>0x00000238</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR1</name>
          <description>Mailbox Control Register (MB = 1)</description>
          <addressOffset>0x0000023C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR2</name>
          <description>Mailbox Mode Register (MB = 2)</description>
          <addressOffset>0x00000240</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM2</name>
          <description>Mailbox Acceptance Mask Register (MB = 2)</description>
          <addressOffset>0x00000244</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID2</name>
          <description>Mailbox ID Register (MB = 2)</description>
          <addressOffset>0x00000248</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID2</name>
          <description>Mailbox Family ID Register (MB = 2)</description>
          <addressOffset>0x0000024C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR2</name>
          <description>Mailbox Status Register (MB = 2)</description>
          <addressOffset>0x00000250</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL2</name>
          <description>Mailbox Data Low Register (MB = 2)</description>
          <addressOffset>0x00000254</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH2</name>
          <description>Mailbox Data High Register (MB = 2)</description>
          <addressOffset>0x00000258</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR2</name>
          <description>Mailbox Control Register (MB = 2)</description>
          <addressOffset>0x0000025C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR3</name>
          <description>Mailbox Mode Register (MB = 3)</description>
          <addressOffset>0x00000260</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM3</name>
          <description>Mailbox Acceptance Mask Register (MB = 3)</description>
          <addressOffset>0x00000264</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID3</name>
          <description>Mailbox ID Register (MB = 3)</description>
          <addressOffset>0x00000268</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID3</name>
          <description>Mailbox Family ID Register (MB = 3)</description>
          <addressOffset>0x0000026C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR3</name>
          <description>Mailbox Status Register (MB = 3)</description>
          <addressOffset>0x00000270</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL3</name>
          <description>Mailbox Data Low Register (MB = 3)</description>
          <addressOffset>0x00000274</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH3</name>
          <description>Mailbox Data High Register (MB = 3)</description>
          <addressOffset>0x00000278</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR3</name>
          <description>Mailbox Control Register (MB = 3)</description>
          <addressOffset>0x0000027C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR4</name>
          <description>Mailbox Mode Register (MB = 4)</description>
          <addressOffset>0x00000280</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM4</name>
          <description>Mailbox Acceptance Mask Register (MB = 4)</description>
          <addressOffset>0x00000284</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID4</name>
          <description>Mailbox ID Register (MB = 4)</description>
          <addressOffset>0x00000288</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID4</name>
          <description>Mailbox Family ID Register (MB = 4)</description>
          <addressOffset>0x0000028C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR4</name>
          <description>Mailbox Status Register (MB = 4)</description>
          <addressOffset>0x00000290</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL4</name>
          <description>Mailbox Data Low Register (MB = 4)</description>
          <addressOffset>0x00000294</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH4</name>
          <description>Mailbox Data High Register (MB = 4)</description>
          <addressOffset>0x00000298</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR4</name>
          <description>Mailbox Control Register (MB = 4)</description>
          <addressOffset>0x0000029C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR5</name>
          <description>Mailbox Mode Register (MB = 5)</description>
          <addressOffset>0x000002A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM5</name>
          <description>Mailbox Acceptance Mask Register (MB = 5)</description>
          <addressOffset>0x000002A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID5</name>
          <description>Mailbox ID Register (MB = 5)</description>
          <addressOffset>0x000002A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID5</name>
          <description>Mailbox Family ID Register (MB = 5)</description>
          <addressOffset>0x000002AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR5</name>
          <description>Mailbox Status Register (MB = 5)</description>
          <addressOffset>0x000002B0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL5</name>
          <description>Mailbox Data Low Register (MB = 5)</description>
          <addressOffset>0x000002B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH5</name>
          <description>Mailbox Data High Register (MB = 5)</description>
          <addressOffset>0x000002B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR5</name>
          <description>Mailbox Control Register (MB = 5)</description>
          <addressOffset>0x000002BC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR6</name>
          <description>Mailbox Mode Register (MB = 6)</description>
          <addressOffset>0x000002C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM6</name>
          <description>Mailbox Acceptance Mask Register (MB = 6)</description>
          <addressOffset>0x000002C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID6</name>
          <description>Mailbox ID Register (MB = 6)</description>
          <addressOffset>0x000002C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID6</name>
          <description>Mailbox Family ID Register (MB = 6)</description>
          <addressOffset>0x000002CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR6</name>
          <description>Mailbox Status Register (MB = 6)</description>
          <addressOffset>0x000002D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL6</name>
          <description>Mailbox Data Low Register (MB = 6)</description>
          <addressOffset>0x000002D4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH6</name>
          <description>Mailbox Data High Register (MB = 6)</description>
          <addressOffset>0x000002D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR6</name>
          <description>Mailbox Control Register (MB = 6)</description>
          <addressOffset>0x000002DC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR7</name>
          <description>Mailbox Mode Register (MB = 7)</description>
          <addressOffset>0x000002E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMEMARK</name>
              <description>Mailbox Timemark</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PRIOR</name>
              <description>Mailbox Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOT</name>
              <description>Mailbox Object Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MB_DISABLED</name>
                  <description>Mailbox is disabled. This prevents receiving or transmitting any messages with this mailbox.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX</name>
                  <description>Reception Mailbox. Mailbox is configured for reception. If a message is received while the mailbox data register is full, it is discarded.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_RX_OVERWRITE</name>
                  <description>Reception mailbox with overwrite. Mailbox is configured for reception. If a message is received while the mailbox is full, it overwrites the previous message.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_TX</name>
                  <description>Transmit mailbox. Mailbox is configured for transmission.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_CONSUMER</name>
                  <description>Consumer Mailbox. Mailbox is configured in reception but behaves as a Transmit Mailbox, i.e., it sends a remote frame and waits for an answer.</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MB_PRODUCER</name>
                  <description>Producer Mailbox. Mailbox is configured in transmission but also behaves like a reception mailbox, i.e., it waits to receive a Remote Frame before sending its contents.</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MAM7</name>
          <description>Mailbox Acceptance Mask Register (MB = 7)</description>
          <addressOffset>0x000002E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MID7</name>
          <description>Mailbox ID Register (MB = 7)</description>
          <addressOffset>0x000002E8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MIDvB</name>
              <description>Complementary bits for identifier in extended frame mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>18</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDvA</name>
              <description>Identifier for standard frame mode</description>
              <bitOffset>18</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIDE</name>
              <description>Identifier Version</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MFID7</name>
          <description>Mailbox Family ID Register (MB = 7)</description>
          <addressOffset>0x000002EC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MFID</name>
              <description>Family ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>29</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MSR7</name>
          <description>Mailbox Status Register (MB = 7)</description>
          <addressOffset>0x000002F0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MTIMESTAMP</name>
              <description>Timer value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MABT</name>
              <description>Mailbox Message Abort</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MRDY</name>
              <description>Mailbox Ready</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MMI</name>
              <description>Mailbox Message Ignored</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDL7</name>
          <description>Mailbox Data Low Register (MB = 7)</description>
          <addressOffset>0x000002F4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDL</name>
              <description>Message Data Low Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDH7</name>
          <description>Mailbox Data High Register (MB = 7)</description>
          <addressOffset>0x000002F8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MDH</name>
              <description>Message Data High Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MCR7</name>
          <description>Mailbox Control Register (MB = 7)</description>
          <addressOffset>0x000002FC</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MDLC</name>
              <description>Mailbox Data Length Code</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MRTR</name>
              <description>Mailbox Remote Transmission Request</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MACR</name>
              <description>Abort Request for Mailbox x</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MTCR</name>
              <description>Mailbox Transfer Command</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TRNG</name>
      <version>6334B</version>
      <description>True Random Number Generator</description>
      <prependToName>TRNG_</prependToName>
      <baseAddress>0x400BC000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_TRNG</name>
        <value>41</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enables the TRNG to provide random values</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Security Key</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODATA</name>
          <description>Output Data Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ODATA</name>
              <description>Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>ADC</name>
      <version>6489I</version>
      <description>Analog-to-digital Converter</description>
      <prependToName>ADC_</prependToName>
      <baseAddress>0x400C0000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_ADC</name>
        <value>37</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>START</name>
              <description>Start Conversion</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRGEN</name>
              <description>Trigger Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>Hardware triggers are disabled. Starting a conversion is only possible by software.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>Hardware trigger selected by TRGSEL field is enabled.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRGSEL</name>
              <description>Trigger Selection</description>
              <bitOffset>1</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ADC_TRIG0</name>
                  <description>External : ADCTRG</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ADC_TRIG1</name>
                  <description>TIOA Output of the Timer Counter Channel 0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ADC_TRIG2</name>
                  <description>TIOA Output of the Timer Counter Channel 1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ADC_TRIG3</name>
                  <description>TIOA Output of the Timer Counter Channel 2</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ADC_TRIG4</name>
                  <description>PWM Event Line 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ADC_TRIG5</name>
                  <description>PWM Event Line 0</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOWRES</name>
              <description>Resolution</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BITS_12</name>
                  <description>12-bit resolution</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BITS_10</name>
                  <description>10-bit resolution</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode: The ADC Core and reference voltage circuitry are kept ON between conversions</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLEEP</name>
                  <description>Sleep Mode: The ADC Core and reference voltage circuitry are OFF between conversions</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FWUP</name>
              <description>Fast Wake Up</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OFF</name>
                  <description>Normal Sleep Mode: The sleep mode is defined by the SLEEP bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ON</name>
                  <description>Fast Wake Up Sleep Mode: The Voltage reference is ON between conversions and ADC Core is OFF</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FREERUN</name>
              <description>Free Run Mode</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OFF</name>
                  <description>Normal Mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ON</name>
                  <description>Free Run Mode: Never wait for any trigger.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRESCAL</name>
              <description>Prescaler Rate Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STARTUP</name>
              <description>Start Up Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SUT0</name>
                  <description>0 periods of ADCClock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT8</name>
                  <description>8 periods of ADCClock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT16</name>
                  <description>16 periods of ADCClock</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT24</name>
                  <description>24 periods of ADCClock</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT64</name>
                  <description>64 periods of ADCClock</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT80</name>
                  <description>80 periods of ADCClock</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT96</name>
                  <description>96 periods of ADCClock</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT112</name>
                  <description>112 periods of ADCClock</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT512</name>
                  <description>512 periods of ADCClock</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT576</name>
                  <description>576 periods of ADCClock</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT640</name>
                  <description>640 periods of ADCClock</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT704</name>
                  <description>704 periods of ADCClock</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT768</name>
                  <description>768 periods of ADCClock</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT832</name>
                  <description>832 periods of ADCClock</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT896</name>
                  <description>896 periods of ADCClock</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT960</name>
                  <description>960 periods of ADCClock</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SETTLING</name>
              <description>Analog Settling Time</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AST3</name>
                  <description>3 periods of ADCClock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AST5</name>
                  <description>5 periods of ADCClock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AST9</name>
                  <description>9 periods of ADCClock</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AST17</name>
                  <description>17 periods of ADCClock</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ANACH</name>
              <description>Analog Change</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No analog change on channel switching: DIFF0, GAIN0 and OFF0 are used for all channels</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALLOWED</name>
                  <description>Allows different analog settings for each channel. See ADC_CGR and ADC_COR Registers</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRACKTIM</name>
              <description>Tracking Time</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRANSFER</name>
              <description>Transfer Period</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USEQ</name>
              <description>Use Sequence Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NUM_ORDER</name>
                  <description>Normal Mode: The controller converts channels in a simple numeric order.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REG_ORDER</name>
                  <description>User Sequence Mode: The sequence respects what is defined in ADC_SEQR1 and ADC_SEQR2 registers.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SEQR1</name>
          <description>Channel Sequence Register 1</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USCH1</name>
              <description>User Sequence Number 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH2</name>
              <description>User Sequence Number 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH3</name>
              <description>User Sequence Number 3</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH4</name>
              <description>User Sequence Number 4</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH5</name>
              <description>User Sequence Number 5</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH6</name>
              <description>User Sequence Number 6</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH7</name>
              <description>User Sequence Number 7</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH8</name>
              <description>User Sequence Number 8</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SEQR2</name>
          <description>Channel Sequence Register 2</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USCH9</name>
              <description>User Sequence Number 9</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH10</name>
              <description>User Sequence Number 10</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH11</name>
              <description>User Sequence Number 11</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH12</name>
              <description>User Sequence Number 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH13</name>
              <description>User Sequence Number 13</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH14</name>
              <description>User Sequence Number 14</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH15</name>
              <description>User Sequence Number 15</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH16</name>
              <description>User Sequence Number 16</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHER</name>
          <description>Channel Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHDR</name>
          <description>Channel Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDR</name>
          <description>Last Converted Data Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LDATA</name>
              <description>Last Data Converted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHNB</name>
              <description>Channel Number</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Enable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Enable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Enable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Enable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Enable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Enable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Enable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Enable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Enable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Enable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Enable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Enable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC12</name>
              <description>End of Conversion Interrupt Enable 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC13</name>
              <description>End of Conversion Interrupt Enable 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC14</name>
              <description>End of Conversion Interrupt Enable 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC15</name>
              <description>End of Conversion Interrupt Enable 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Disable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Disable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Disable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Disable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Disable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Disable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Disable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Disable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Disable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Disable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Disable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Disable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC12</name>
              <description>End of Conversion Interrupt Disable 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC13</name>
              <description>End of Conversion Interrupt Disable 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC14</name>
              <description>End of Conversion Interrupt Disable 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC15</name>
              <description>End of Conversion Interrupt Disable 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Mask 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Mask 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Mask 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Mask 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Mask 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Mask 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Mask 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Mask 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Mask 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Mask 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Mask 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Mask 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC12</name>
              <description>End of Conversion Interrupt Mask 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC13</name>
              <description>End of Conversion Interrupt Mask 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC14</name>
              <description>End of Conversion Interrupt Mask 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC15</name>
              <description>End of Conversion Interrupt Mask 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receive Buffer Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC12</name>
              <description>End of Conversion 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC13</name>
              <description>End of Conversion 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC14</name>
              <description>End of Conversion 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC15</name>
              <description>End of Conversion 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of RX Buffer</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>RX Buffer Full</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OVER</name>
          <description>Overrun Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OVRE0</name>
              <description>Overrun Error 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE1</name>
              <description>Overrun Error 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE2</name>
              <description>Overrun Error 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE3</name>
              <description>Overrun Error 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE4</name>
              <description>Overrun Error 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE5</name>
              <description>Overrun Error 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE6</name>
              <description>Overrun Error 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE7</name>
              <description>Overrun Error 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE8</name>
              <description>Overrun Error 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE9</name>
              <description>Overrun Error 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE10</name>
              <description>Overrun Error 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE11</name>
              <description>Overrun Error 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE12</name>
              <description>Overrun Error 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE13</name>
              <description>Overrun Error 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE14</name>
              <description>Overrun Error 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE15</name>
              <description>Overrun Error 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EMR</name>
          <description>Extended Mode Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CMPMODE</name>
              <description>Comparison Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>Generates an event when the converted data is lower than the low threshold of the window.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>Generates an event when the converted data is higher than the high threshold of the window.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IN</name>
                  <description>Generates an event when the converted data is in the comparison window.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUT</name>
                  <description>Generates an event when the converted data is out of the comparison window.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CMPSEL</name>
              <description>Comparison Selected Channel</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CMPALL</name>
              <description>Compare All Channels</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CMPFILTER</name>
              <description>Compare Event Filtering</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAG</name>
              <description>TAG of ADC_LDCR register</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWR</name>
          <description>Compare Window Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LOWTHRES</name>
              <description>Low Threshold</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HIGHTHRES</name>
              <description>High Threshold</description>
              <bitOffset>16</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CGR</name>
          <description>Channel Gain Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>GAIN0</name>
              <description>Gain for channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN1</name>
              <description>Gain for channel 1</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN2</name>
              <description>Gain for channel 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN3</name>
              <description>Gain for channel 3</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN4</name>
              <description>Gain for channel 4</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN5</name>
              <description>Gain for channel 5</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN6</name>
              <description>Gain for channel 6</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN7</name>
              <description>Gain for channel 7</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN8</name>
              <description>Gain for channel 8</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN9</name>
              <description>Gain for channel 9</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN10</name>
              <description>Gain for channel 10</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN11</name>
              <description>Gain for channel 11</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN12</name>
              <description>Gain for channel 12</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN13</name>
              <description>Gain for channel 13</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN14</name>
              <description>Gain for channel 14</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GAIN15</name>
              <description>Gain for channel 15</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>COR</name>
          <description>Channel Offset Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OFF0</name>
              <description>Offset for channel 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF1</name>
              <description>Offset for channel 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF2</name>
              <description>Offset for channel 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF3</name>
              <description>Offset for channel 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF4</name>
              <description>Offset for channel 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF5</name>
              <description>Offset for channel 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF6</name>
              <description>Offset for channel 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF7</name>
              <description>Offset for channel 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF8</name>
              <description>Offset for channel 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF9</name>
              <description>Offset for channel 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF10</name>
              <description>Offset for channel 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF11</name>
              <description>Offset for channel 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF12</name>
              <description>Offset for channel 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF13</name>
              <description>Offset for channel 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF14</name>
              <description>Offset for channel 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OFF15</name>
              <description>Offset for channel 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF0</name>
              <description>Differential inputs for channel 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF1</name>
              <description>Differential inputs for channel 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF2</name>
              <description>Differential inputs for channel 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF3</name>
              <description>Differential inputs for channel 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF4</name>
              <description>Differential inputs for channel 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF5</name>
              <description>Differential inputs for channel 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF6</name>
              <description>Differential inputs for channel 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF7</name>
              <description>Differential inputs for channel 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF8</name>
              <description>Differential inputs for channel 8</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF9</name>
              <description>Differential inputs for channel 9</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF10</name>
              <description>Differential inputs for channel 10</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF11</name>
              <description>Differential inputs for channel 11</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF12</name>
              <description>Differential inputs for channel 12</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF13</name>
              <description>Differential inputs for channel 13</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF14</name>
              <description>Differential inputs for channel 14</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIFF15</name>
              <description>Differential inputs for channel 15</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>16</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-15</dimIndex>
          <name>CDR%s</name>
          <description>Channel Data Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Converted Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ACR</name>
          <description>Analog Control Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000100</resetValue>
          <fields>
            <field>
              <name>TSON</name>
              <description>Temperature Sensor On</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IBCTL</name>
              <description>ADC Bias Current Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DMAC</name>
      <version>6233L</version>
      <description>DMA Controller</description>
      <prependToName>DMAC_</prependToName>
      <baseAddress>0x400C4000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_DMAC</name>
        <value>39</value>
      </interrupt>
      <registers>
        <register>
          <name>GCFG</name>
          <description>DMAC Global Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>ARB_CFG</name>
              <description>Arbiter Configuration</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>Fixed priority arbiter.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROUND_ROBIN</name>
                  <description>Modified round robin arbiter.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EN</name>
          <description>DMAC Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SREQ</name>
          <description>DMAC Software Single Request Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SSREQ0</name>
              <description>Source Request</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ0</name>
              <description>Destination Request</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ1</name>
              <description>Source Request</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ1</name>
              <description>Destination Request</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ2</name>
              <description>Source Request</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ2</name>
              <description>Destination Request</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ3</name>
              <description>Source Request</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ3</name>
              <description>Destination Request</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ4</name>
              <description>Source Request</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ4</name>
              <description>Destination Request</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ5</name>
              <description>Source Request</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ5</name>
              <description>Destination Request</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CREQ</name>
          <description>DMAC Software Chunk Transfer Request Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCREQ0</name>
              <description>Source Chunk Request</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ0</name>
              <description>Destination Chunk Request</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ1</name>
              <description>Source Chunk Request</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ1</name>
              <description>Destination Chunk Request</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ2</name>
              <description>Source Chunk Request</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ2</name>
              <description>Destination Chunk Request</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ3</name>
              <description>Source Chunk Request</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ3</name>
              <description>Destination Chunk Request</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ4</name>
              <description>Source Chunk Request</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ4</name>
              <description>Destination Chunk Request</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ5</name>
              <description>Source Chunk Request</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ5</name>
              <description>Destination Chunk Request</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LAST</name>
          <description>DMAC Software Last Transfer Flag Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SLAST0</name>
              <description>Source Last</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST0</name>
              <description>Destination Last</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST1</name>
              <description>Source Last</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST1</name>
              <description>Destination Last</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST2</name>
              <description>Source Last</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST2</name>
              <description>Destination Last</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST3</name>
              <description>Source Last</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST3</name>
              <description>Destination Last</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST4</name>
              <description>Source Last</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST4</name>
              <description>Destination Last</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST5</name>
              <description>Source Last</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST5</name>
              <description>Destination Last</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIER</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer Transfer Completed Interrupt Enable register.</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [5:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [5:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [5:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [5:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [5:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [5:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIDR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer Transfer Completed Interrupt Disable register.</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [5:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [5:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [5:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [5:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [5:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [5:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIMR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer transfer completed Mask Register.</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [5:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [5:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [5:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [5:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [5:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [5:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCISR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer transfer completed Status Register.</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [5:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [5:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [5:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [5:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [5:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [5:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHER</name>
          <description>DMAC Channel Handler Enable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP0</name>
              <description>Suspend [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP1</name>
              <description>Suspend [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP2</name>
              <description>Suspend [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP3</name>
              <description>Suspend [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP4</name>
              <description>Suspend [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP5</name>
              <description>Suspend [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP0</name>
              <description>Keep on [5:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP1</name>
              <description>Keep on [5:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP2</name>
              <description>Keep on [5:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP3</name>
              <description>Keep on [5:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP4</name>
              <description>Keep on [5:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP5</name>
              <description>Keep on [5:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHDR</name>
          <description>DMAC Channel Handler Disable Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DIS0</name>
              <description>Disable [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS1</name>
              <description>Disable [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS2</name>
              <description>Disable [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS3</name>
              <description>Disable [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS4</name>
              <description>Disable [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS5</name>
              <description>Disable [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES0</name>
              <description>Resume [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES1</name>
              <description>Resume [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES2</name>
              <description>Resume [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES3</name>
              <description>Resume [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES4</name>
              <description>Resume [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES5</name>
              <description>Resume [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHSR</name>
          <description>DMAC Channel Handler Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00FF0000</resetValue>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable [5:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable [5:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable [5:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable [5:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable [5:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable [5:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP0</name>
              <description>Suspend [5:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP1</name>
              <description>Suspend [5:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP2</name>
              <description>Suspend [5:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP3</name>
              <description>Suspend [5:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP4</name>
              <description>Suspend [5:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP5</name>
              <description>Suspend [5:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT0</name>
              <description>Empty [5:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT1</name>
              <description>Empty [5:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT2</name>
              <description>Empty [5:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT3</name>
              <description>Empty [5:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT4</name>
              <description>Empty [5:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT5</name>
              <description>Empty [5:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL0</name>
              <description>Stalled [5:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL1</name>
              <description>Stalled [5:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL2</name>
              <description>Stalled [5:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL3</name>
              <description>Stalled [5:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL4</name>
              <description>Stalled [5:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL5</name>
              <description>Stalled [5:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR0</name>
          <description>DMAC Channel Source Address Register (ch_num = 0)</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR0</name>
          <description>DMAC Channel Destination Address Register (ch_num = 0)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR0</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 0)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA0</name>
          <description>DMAC Channel Control A Register (ch_num = 0)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB0</name>
          <description>DMAC Channel Control B Register (ch_num = 0)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG0</name>
          <description>DMAC Channel Configuration Register (ch_num = 0)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR1</name>
          <description>DMAC Channel Source Address Register (ch_num = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR1</name>
          <description>DMAC Channel Destination Address Register (ch_num = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR1</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA1</name>
          <description>DMAC Channel Control A Register (ch_num = 1)</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB1</name>
          <description>DMAC Channel Control B Register (ch_num = 1)</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG1</name>
          <description>DMAC Channel Configuration Register (ch_num = 1)</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR2</name>
          <description>DMAC Channel Source Address Register (ch_num = 2)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR2</name>
          <description>DMAC Channel Destination Address Register (ch_num = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR2</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA2</name>
          <description>DMAC Channel Control A Register (ch_num = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB2</name>
          <description>DMAC Channel Control B Register (ch_num = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG2</name>
          <description>DMAC Channel Configuration Register (ch_num = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR3</name>
          <description>DMAC Channel Source Address Register (ch_num = 3)</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR3</name>
          <description>DMAC Channel Destination Address Register (ch_num = 3)</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR3</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 3)</description>
          <addressOffset>0x000000BC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA3</name>
          <description>DMAC Channel Control A Register (ch_num = 3)</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB3</name>
          <description>DMAC Channel Control B Register (ch_num = 3)</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG3</name>
          <description>DMAC Channel Configuration Register (ch_num = 3)</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR4</name>
          <description>DMAC Channel Source Address Register (ch_num = 4)</description>
          <addressOffset>0x000000DC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR4</name>
          <description>DMAC Channel Destination Address Register (ch_num = 4)</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR4</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 4)</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA4</name>
          <description>DMAC Channel Control A Register (ch_num = 4)</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB4</name>
          <description>DMAC Channel Control B Register (ch_num = 4)</description>
          <addressOffset>0x000000EC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG4</name>
          <description>DMAC Channel Configuration Register (ch_num = 4)</description>
          <addressOffset>0x000000F0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR5</name>
          <description>DMAC Channel Source Address Register (ch_num = 5)</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR5</name>
          <description>DMAC Channel Destination Address Register (ch_num = 5)</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR5</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 5)</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA5</name>
          <description>DMAC Channel Control A Register (ch_num = 5)</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB5</name>
          <description>DMAC Channel Control B Register (ch_num = 5)</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG5</name>
          <description>DMAC Channel Configuration Register (ch_num = 5)</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>DMAC Write Protect Mode Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>DMAC Write Protect Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DACC</name>
      <version>6461F</version>
      <description>Digital-to-Analog Converter Controller</description>
      <prependToName>DACC_</prependToName>
      <baseAddress>0x400C8000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_DACC</name>
        <value>38</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRGEN</name>
              <description>Trigger Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>External trigger mode disabled. DACC in free running mode.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>External trigger mode enabled.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRGSEL</name>
              <description>Trigger Selection</description>
              <bitOffset>1</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WORD</name>
              <description>Word Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HALF</name>
                  <description>Half-Word transfer</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>Word Transfer</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FASTWKUP</name>
              <description>Fast Wake up Mode</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>REFRESH</name>
              <description>Refresh Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USER_SEL</name>
              <description>User Channel Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHANNEL0</name>
                  <description>Channel 0</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHANNEL1</name>
                  <description>Channel 1</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TAG</name>
              <description>Tag Selection Mode</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>Tag selection mode disabled. Using USER_SEL to select the channel for the conversion.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>Tag selection mode enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MAXS</name>
              <description>Max Speed Mode</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MAXIMUM</name>
                  <description>Max Speed Mode enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTUP</name>
              <description>Startup Time Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>0</name>
                  <description>0 periods of DACClock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8</name>
                  <description>8 periods of DACClock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16</name>
                  <description>16 periods of DACClock</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24</name>
                  <description>24 periods of DACClock</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64</name>
                  <description>64 periods of DACClock</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>80</name>
                  <description>80 periods of DACClock</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>96</name>
                  <description>96 periods of DACClock</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>112</name>
                  <description>112 periods of DACClock</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512</name>
                  <description>512 periods of DACClock</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>576</name>
                  <description>576 periods of DACClock</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>640</name>
                  <description>640 periods of DACClock</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>704</name>
                  <description>704 periods of DACClock</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>768</name>
                  <description>768 periods of DACClock</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>832</name>
                  <description>832 periods of DACClock</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>896</name>
                  <description>896 periods of DACClock</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>960</name>
                  <description>960 periods of DACClock</description>
                  <value>0xF</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024</name>
                  <description>1024 periods of DACClock</description>
                  <value>0x10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1088</name>
                  <description>1088 periods of DACClock</description>
                  <value>0x11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1152</name>
                  <description>1152 periods of DACClock</description>
                  <value>0x12</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1216</name>
                  <description>1216 periods of DACClock</description>
                  <value>0x13</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1280</name>
                  <description>1280 periods of DACClock</description>
                  <value>0x14</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1344</name>
                  <description>1344 periods of DACClock</description>
                  <value>0x15</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1408</name>
                  <description>1408 periods of DACClock</description>
                  <value>0x16</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1472</name>
                  <description>1472 periods of DACClock</description>
                  <value>0x17</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1536</name>
                  <description>1536 periods of DACClock</description>
                  <value>0x18</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1600</name>
                  <description>1600 periods of DACClock</description>
                  <value>0x19</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1664</name>
                  <description>1664 periods of DACClock</description>
                  <value>0x1A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1728</name>
                  <description>1728 periods of DACClock</description>
                  <value>0x1B</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1792</name>
                  <description>1792 periods of DACClock</description>
                  <value>0x1C</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1856</name>
                  <description>1856 periods of DACClock</description>
                  <value>0x1D</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1920</name>
                  <description>1920 periods of DACClock</description>
                  <value>0x1E</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1984</name>
                  <description>1984 periods of DACClock</description>
                  <value>0x1F</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CHER</name>
          <description>Channel Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHDR</name>
          <description>Channel Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDR</name>
          <description>Conversion Data Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Convert</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC</name>
              <description>End of Conversion Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC</name>
              <description>End of Conversion Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC</name>
              <description>End of Conversion Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmit Buffer Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Flag</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC</name>
              <description>End of Conversion Interrupt Flag</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of DMA Interrupt Flag</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmit Buffer Empty</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ACR</name>
          <description>Analog Current Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IBCTLCH0</name>
              <description>Analog Output Current Control</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IBCTLCH1</name>
              <description>Analog Output Current Control</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>IBCTLDACCORE</name>
              <description>Bias Current Control for DAC Core</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPROTERR</name>
              <description>Write protection error</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPROTADDR</name>
              <description>Write protection error address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SMC</name>
      <version>6411D</version>
      <description>Static Memory Controller</description>
      <groupName>EBI</groupName>
      <prependToName>SMC_</prependToName>
      <baseAddress>0x400E0000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CFG</name>
          <description>SMC NFC Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAGESIZE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PS512_16</name>
                  <description>Main area 512 Bytes + Spare area 16 Bytes = 528 Bytes</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS1024_32</name>
                  <description>Main area 1024 Bytes + Spare area 32 Bytes = 1056 Bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS2048_64</name>
                  <description>Main area 2048 Bytes + Spare area 64 Bytes = 2112 Bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS4096_128</name>
                  <description>Main area 4096 Bytes + Spare area 128 Bytes = 4224 Bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WSPARE</name>
              <description>Write Spare Area</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RSPARE</name>
              <description>Read Spare Area</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EDGECTRL</name>
              <description>Rising/Falling Edge Detection Control</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBEDGE</name>
              <description>Ready/Busy Signal Edge Detection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTOCYC</name>
              <description>Data Timeout Cycle Number</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTOMUL</name>
              <description>Data Timeout Multiplier</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>X1</name>
                  <description>DTOCYC</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X16</name>
                  <description>DTOCYC x 16</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X128</name>
                  <description>DTOCYC x 128</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X256</name>
                  <description>DTOCYC x 256</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X1024</name>
                  <description>DTOCYC x 1024</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X4096</name>
                  <description>DTOCYC x 4096</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X65536</name>
                  <description>DTOCYC x 65536</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>X1048576</name>
                  <description>DTOCYC x 1048576</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL</name>
          <description>SMC NFC Control Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NFCEN</name>
              <description>NAND Flash Controller Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NFCDIS</name>
              <description>NAND Flash Controller Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>SMC NFC Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SMCSTS</name>
              <description>NAND Flash Controller status (this field cannot be reset)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RB_RISE</name>
              <description>Selected Ready Busy Rising Edge Detected</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RB_FALL</name>
              <description>Selected Ready Busy Falling Edge Detected</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NFCBUSY</name>
              <description>NFC Busy (this field cannot be reset)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NFCWR</name>
              <description>NFC Write/Read Operation (this field cannot be reset)</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NFCSID</name>
              <description>NFC Chip Select ID (this field cannot be reset)</description>
              <bitOffset>12</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>NFC Data Transfer Terminated</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMDDONE</name>
              <description>Command Done</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Timeout Error</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDEF</name>
              <description>Undefined Area Error</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AWB</name>
              <description>Accessing While Busy</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NFCASE</name>
              <description>NFC Access Size Error</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RB_EDGE0</name>
              <description>Ready/Busy Line 0 Edge Detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>SMC NFC Interrupt Enable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB_RISE</name>
              <description>Ready Busy Rising Edge Detection Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RB_FALL</name>
              <description>Ready Busy Falling Edge Detection Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMDDONE</name>
              <description>Command Done Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Timeout Error Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDEF</name>
              <description>Undefined Area Access Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AWB</name>
              <description>Accessing While Busy Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NFCASE</name>
              <description>NFC Access Size Error Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RB_EDGE0</name>
              <description>Ready/Busy Line 0 Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>SMC NFC Interrupt Disable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB_RISE</name>
              <description>Ready Busy Rising Edge Detection Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RB_FALL</name>
              <description>Ready Busy Falling Edge Detection Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CMDDONE</name>
              <description>Command Done Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Timeout Error Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNDEF</name>
              <description>Undefined Area Access Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>AWB</name>
              <description>Accessing While Busy Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NFCASE</name>
              <description>NFC Access Size Error Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RB_EDGE0</name>
              <description>Ready/Busy Line 0 Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>SMC NFC Interrupt Mask Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB_RISE</name>
              <description>Ready Busy Rising Edge Detection Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RB_FALL</name>
              <description>Ready Busy Falling Edge Detection Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CMDDONE</name>
              <description>Command Done Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Timeout Error Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNDEF</name>
              <description>Undefined Area Access Interrupt Mask5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>AWB</name>
              <description>Accessing While Busy Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NFCASE</name>
              <description>NFC Access Size Error Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RB_EDGE0</name>
              <description>Ready/Busy Line 0 Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ADDR</name>
          <description>SMC NFC Address Cycle Zero Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR_CYCLE0</name>
              <description>NAND Flash Array Address cycle 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BANK</name>
          <description>SMC Bank Address Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BANK</name>
              <description>Bank Identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_CTRL</name>
          <description>SMC ECC Control Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RST</name>
              <description>Reset ECC</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_MD</name>
          <description>SMC ECC Mode Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC_PAGESIZE</name>
              <description>ECC Page Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PS512_16</name>
                  <description>Main area 512 Bytes + Spare area 16 Bytes = 528 Bytes</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS1024_32</name>
                  <description>Main area 1024 Bytes + Spare area 32 Bytes = 1056 Bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS2048_64</name>
                  <description>Main area 2048 Bytes + Spare area 64 Bytes = 2112 Bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PS4096_128</name>
                  <description>Main area 4096 Bytes + Spare area 128 Bytes = 4224 Bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TYPCORREC</name>
              <description>Type of Correction</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CPAGE</name>
                  <description>1 bit correction for a page of 512/1024/2048/4096 Bytes  (for 8 or 16-bit NAND Flash)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>C256B</name>
                  <description>1 bit correction for 256 Bytes of data for a page of 512/2048/4096 bytes (for 8-bit NAND Flash only)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>C512B</name>
                  <description>1 bit correction for 512 Bytes of data for a page of 512/2048/4096 bytes (for 8-bit NAND Flash only)</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_SR1</name>
          <description>SMC ECC Status 1 Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RECERR0</name>
              <description>Recoverable Error</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR0</name>
              <description>ECC Error</description>
              <bitOffset>1</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR1</name>
              <description>Recoverable Error in the page between the 256th and the 511th bytes or the 512nd and the 1023rd bytes</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR1</name>
              <description>ECC Error in the page between the 256th and the 511th bytes or between the 512nd and the 1023rd bytes</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR1</name>
              <description>Multiple Error in the page between the 256th and the 511th bytes or between the 512nd and the 1023rd bytes</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR2</name>
              <description>Recoverable Error in the page between the 512nd and the 767th bytes or between the 1024th and the 1535th bytes</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR2</name>
              <description>ECC Error in the page between the 512nd and the 767th bytes or between the 1024th and the 1535th bytes</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR2</name>
              <description>Multiple Error in the page between the 512nd and the 767th bytes or between the 1024th and the 1535th bytes</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR3</name>
              <description>Recoverable Error in the page between the 768th and the 1023rd bytes or between the 1536th and the 2047th bytes</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR3</name>
              <description>ECC Error in the page between the 768th and the 1023rd bytes or between the 1536th and the 2047th bytes</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR3</name>
              <description>Multiple Error in the page between the 768th and the 1023rd bytes or between the 1536th and the 2047th bytes</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR4</name>
              <description>Recoverable Error in the page between the 1024th and the 1279th bytes or between the 2048th and the 2559th bytes</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR4</name>
              <description>ECC Error in the page between the 1024th and the 1279th bytes or between the 2048th and the 2559th bytes</description>
              <bitOffset>17</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR5</name>
              <description>Recoverable Error in the page between the 1280th and the 1535th bytes or between the 2560th and the 3071st bytes</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR5</name>
              <description>ECC Error in the page between the 1280th and the 1535th bytes or between the 2560th and the 3071st bytes</description>
              <bitOffset>21</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR6</name>
              <description>Recoverable Error in the page between the 1536th and the 1791st bytes or between the 3072nd and the 3583rd bytes</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR6</name>
              <description>ECC Error in the page between the 1536th and the 1791st bytes or between the 3072nd and the 3583rd bytes</description>
              <bitOffset>25</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR7</name>
              <description>Recoverable Error in the page between the 1792nd and the 2047th bytes or between the 3584th and the 4095th bytes</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR7</name>
              <description>ECC Error in the page between the 1792nd and the 2047th bytes or between the 3584th and the 4095th bytes</description>
              <bitOffset>29</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR0</name>
          <description>SMC ECC Parity 0 Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Bit Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Word Address</description>
              <bitOffset>4</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR0_W9BIT</name>
          <description>SMC ECC Parity 0 Register</description>
          <alternateGroup>W9BIT</alternateGroup>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR0_W8BIT</name>
          <description>SMC ECC Parity 0 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR1</name>
          <description>SMC ECC parity 1 Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR1_W9BIT</name>
          <description>SMC ECC parity 1 Register</description>
          <alternateGroup>W9BIT</alternateGroup>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR1_W8BIT</name>
          <description>SMC ECC parity 1 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_SR2</name>
          <description>SMC ECC status 2 Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RECERR8</name>
              <description>Recoverable Error in the page between the 2048th and the 2303rd bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR8</name>
              <description>ECC Error in the page between the 2048th and the 2303rd bytes</description>
              <bitOffset>1</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR9</name>
              <description>Recoverable Error in the page between the 2304th and the 2559th bytes</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR9</name>
              <description>ECC Error in the page between the 2304th and the 2559th bytes</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR9</name>
              <description>Multiple Error in the page between the 2304th and the 2559th bytes</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR10</name>
              <description>Recoverable Error in the page between the 2560th and the 2815th bytes</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR10</name>
              <description>ECC Error in the page between the 2560th and the 2815th bytes</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR10</name>
              <description>Multiple Error in the page between the 2560th and the 2815th bytes</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR11</name>
              <description>Recoverable Error in the page between the 2816th and the 3071st bytes</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR11</name>
              <description>ECC Error in the page between the 2816th and the 3071st bytes</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MULERR11</name>
              <description>Multiple Error in the page between the 2816th and the 3071st bytes</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR12</name>
              <description>Recoverable Error in the page between the 3072nd and the 3327th bytes</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR12</name>
              <description>ECC Error in the page between the 3072nd and the 3327th bytes</description>
              <bitOffset>17</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR13</name>
              <description>Recoverable Error in the page between the 3328th and the 3583rd bytes</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR13</name>
              <description>ECC Error in the page between the 3328th and the 3583rd bytes</description>
              <bitOffset>21</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR14</name>
              <description>Recoverable Error in the page between the 3584th and the 3839th bytes</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR14</name>
              <description>ECC Error in the page between the 3584th and the 3839th bytes</description>
              <bitOffset>25</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RECERR15</name>
              <description>Recoverable Error in the page between the 3840th and the 4095th bytes</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ECCERR15</name>
              <description>ECC Error in the page between the 3840th and the 4095th bytes</description>
              <bitOffset>29</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR2</name>
          <description>SMC ECC parity 2 Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR2_W8BIT</name>
          <description>SMC ECC parity 2 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR3</name>
          <description>SMC ECC parity 3 Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR3_W8BIT</name>
          <description>SMC ECC parity 3 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR4</name>
          <description>SMC ECC parity 4 Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR4_W8BIT</name>
          <description>SMC ECC parity 4 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR5</name>
          <description>SMC ECC parity 5 Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR5_W8BIT</name>
          <description>SMC ECC parity 5 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR6</name>
          <description>SMC ECC parity 6 Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR6_W8BIT</name>
          <description>SMC ECC parity 6 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR7</name>
          <description>SMC ECC parity 7 Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 512) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR7_W8BIT</name>
          <description>SMC ECC parity 7 Register</description>
          <alternateGroup>W8BIT</alternateGroup>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR8</name>
          <description>SMC ECC parity 8 Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR9</name>
          <description>SMC ECC parity 9 Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR10</name>
          <description>SMC ECC parity 10 Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR11</name>
          <description>SMC ECC parity 11 Register</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR12</name>
          <description>SMC ECC parity 12 Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR13</name>
          <description>SMC ECC parity 13 Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR14</name>
          <description>SMC ECC parity 14 Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC_PR15</name>
          <description>SMC ECC parity 15 Register</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BITADDR</name>
              <description>Corrupted Bit Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WORDADDR</name>
              <description>Corrupted Word Address in the Page between (i x 256) and ((i + 1) x 512) - 1) Bytes</description>
              <bitOffset>3</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NPARITY</name>
              <description>Parity N</description>
              <bitOffset>12</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP0</name>
          <description>SMC Setup Register (CS_number = 0)</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE0</name>
          <description>SMC Pulse Register (CS_number = 0)</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE0</name>
          <description>SMC Cycle Register (CS_number = 0)</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS0</name>
          <description>SMC Timings Register (CS_number = 0)</description>
          <addressOffset>0x0000007C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE0</name>
          <description>SMC Mode Register (CS_number = 0)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP1</name>
          <description>SMC Setup Register (CS_number = 1)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE1</name>
          <description>SMC Pulse Register (CS_number = 1)</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE1</name>
          <description>SMC Cycle Register (CS_number = 1)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS1</name>
          <description>SMC Timings Register (CS_number = 1)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE1</name>
          <description>SMC Mode Register (CS_number = 1)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP2</name>
          <description>SMC Setup Register (CS_number = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE2</name>
          <description>SMC Pulse Register (CS_number = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE2</name>
          <description>SMC Cycle Register (CS_number = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS2</name>
          <description>SMC Timings Register (CS_number = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE2</name>
          <description>SMC Mode Register (CS_number = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP3</name>
          <description>SMC Setup Register (CS_number = 3)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE3</name>
          <description>SMC Pulse Register (CS_number = 3)</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE3</name>
          <description>SMC Cycle Register (CS_number = 3)</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS3</name>
          <description>SMC Timings Register (CS_number = 3)</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE3</name>
          <description>SMC Mode Register (CS_number = 3)</description>
          <addressOffset>0x000000BC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP4</name>
          <description>SMC Setup Register (CS_number = 4)</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE4</name>
          <description>SMC Pulse Register (CS_number = 4)</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE4</name>
          <description>SMC Cycle Register (CS_number = 4)</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS4</name>
          <description>SMC Timings Register (CS_number = 4)</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE4</name>
          <description>SMC Mode Register (CS_number = 4)</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP5</name>
          <description>SMC Setup Register (CS_number = 5)</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE5</name>
          <description>SMC Pulse Register (CS_number = 5)</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE5</name>
          <description>SMC Cycle Register (CS_number = 5)</description>
          <addressOffset>0x000000DC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS5</name>
          <description>SMC Timings Register (CS_number = 5)</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE5</name>
          <description>SMC Mode Register (CS_number = 5)</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP6</name>
          <description>SMC Setup Register (CS_number = 6)</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE6</name>
          <description>SMC Pulse Register (CS_number = 6)</description>
          <addressOffset>0x000000EC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE6</name>
          <description>SMC Cycle Register (CS_number = 6)</description>
          <addressOffset>0x000000F0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS6</name>
          <description>SMC Timings Register (CS_number = 6)</description>
          <addressOffset>0x000000F4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE6</name>
          <description>SMC Mode Register (CS_number = 6)</description>
          <addressOffset>0x000000F8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP7</name>
          <description>SMC Setup Register (CS_number = 7)</description>
          <addressOffset>0x000000FC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in Write Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in Read Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE7</name>
          <description>SMC Pulse Register (CS_number = 7)</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE7</name>
          <description>SMC Cycle Register (CS_number = 7)</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMINGS7</name>
          <description>SMC Timings Register (CS_number = 7)</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCLR</name>
              <description>CLE to REN Low Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TADL</name>
              <description>ALE to Data Start</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAR</name>
              <description>ALE to REN Low Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCMS</name>
              <description>Off Chip Memory Scrambling Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRR</name>
              <description>Ready to REN Low Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWB</name>
              <description>WEN High to REN to Busy</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RBNSEL</name>
              <description>Ready/Busy Line Selection</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NFSEL</name>
              <description>NAND Flash Selection</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE7</name>
          <description>SMC Mode Register (CS_number = 7)</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10000003</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Read operation is controlled by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NRD_CTRL</name>
                  <description>The Read operation is controlled by the NRD signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NCS_CTRL</name>
                  <description>The Write operation is controller by the NCS signal.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NWE_CTRL</name>
                  <description>The Write operation is controlled by the NWE signal.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>Disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FROZEN</name>
                  <description>Frozen Mode</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READY</name>
                  <description>Ready Mode</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BIT_8</name>
                  <description>8-bit bus</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BIT_16</name>
                  <description>16-bit bus</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OCMS</name>
          <description>SMC OCMS Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SMSE</name>
              <description>Static Memory Controller Scrambling Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRSE</name>
              <description>SRAM Scrambling Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>KEY1</name>
          <description>SMC OCMS KEY1 Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>KEY1</name>
              <description>Off Chip Memory Scrambling (OCMS) Key Part 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>KEY2</name>
          <description>SMC OCMS KEY2 Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>KEY2</name>
              <description>Off Chip Memory Scrambling (OCMS) Key Part 2</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPCR</name>
          <description>Write Protection Control Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WP_EN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WP_KEY</name>
              <description>Write Protection KEY password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WP_VS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WP_VSRC</name>
              <description>Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>MATRIX</name>
      <version>11060A</version>
      <description>AHB Bus Matrix</description>
      <baseAddress>0x400E0400</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-5</dimIndex>
          <name>MATRIX_MCFG%s</name>
          <description>Master Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>ULBT</name>
              <description>Undefined Length Burst Type</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>9</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-8</dimIndex>
          <name>MATRIX_SCFG%s</name>
          <description>Slave Configuration Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>SLOT_CYCLE</name>
              <description>Maximum Number of Allowed Cycles for a Burst</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DEFMSTR_TYPE</name>
              <description>Default Master Type</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIXED_DEFMSTR</name>
              <description>Fixed Default Master</description>
              <bitOffset>18</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ARBT</name>
              <description>Arbitration Type</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS0</name>
          <description>Priority Register A for Slave 0</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS1</name>
          <description>Priority Register A for Slave 1</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS2</name>
          <description>Priority Register A for Slave 2</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS3</name>
          <description>Priority Register A for Slave 3</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS4</name>
          <description>Priority Register A for Slave 4</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS5</name>
          <description>Priority Register A for Slave 5</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS6</name>
          <description>Priority Register A for Slave 6</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS7</name>
          <description>Priority Register A for Slave 7</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_PRAS8</name>
          <description>Priority Register A for Slave 8</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_MRCR</name>
          <description>Master Remap Control Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RCB0</name>
              <description>Remap Command Bit for AHB Master 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB1</name>
              <description>Remap Command Bit for AHB Master 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB2</name>
              <description>Remap Command Bit for AHB Master 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB3</name>
              <description>Remap Command Bit for AHB Master 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB4</name>
              <description>Remap Command Bit for AHB Master 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB5</name>
              <description>Remap Command Bit for AHB Master 5</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCFG_SYSIO</name>
          <description>System I/O Configuration register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYSIO12</name>
              <description>PC0 or ERASE Assignment</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect ENable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY (Write-only)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MATRIX_WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PMC</name>
      <version>11116C</version>
      <description>Power Management Controller</description>
      <baseAddress>0x400E0600</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x140</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PMC</name>
        <value>5</value>
      </interrupt>
      <registers>
        <register>
          <name>PMC_SCER</name>
          <description>System Clock Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>UOTGCLK</name>
              <description>Enable USB OTG Clock (48 MHz, USB_48M) for UTMI</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK2</name>
              <description>Programmable Clock 2 Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SCDR</name>
          <description>System Clock Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>UOTGCLK</name>
              <description>Disable USB OTG Clock (48 MHz, USB_48M) for UTMI</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK2</name>
              <description>Programmable Clock 2 Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SCSR</name>
          <description>System Clock Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>UOTGCLK</name>
              <description>USB OTG Clock (48 MHz, USB_48M) Clock Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCK2</name>
              <description>Programmable Clock 2 Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCER0</name>
          <description>Peripheral Clock Enable Register 0</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCDR0</name>
          <description>Peripheral Clock Disable Register 0</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCSR0</name>
          <description>Peripheral Clock Status Register 0</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_UCKR</name>
          <description>UTMI Clock Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10200800</resetValue>
          <fields>
            <field>
              <name>UPLLEN</name>
              <description>UTMI PLL Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPLLCOUNT</name>
              <description>UTMI PLL Start-up Time</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_MOR</name>
          <description>Main Oscillator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>MOSCXTEN</name>
              <description>Main Crystal Oscillator Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCXTBY</name>
              <description>Main Crystal Oscillator Bypass</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCRCEN</name>
              <description>Main On-Chip RC Oscillator Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCRCF</name>
              <description>Main On-Chip RC Oscillator Frequency Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>4_MHz</name>
                  <description>The Fast RC Oscillator Frequency is at 4 MHz (default)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_MHz</name>
                  <description>The Fast RC Oscillator Frequency is at 8 MHz</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12_MHz</name>
                  <description>The Fast RC Oscillator Frequency is at 12 MHz</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MOSCXTST</name>
              <description>Main Crystal Oscillator Start-up Time</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCSEL</name>
              <description>Main Oscillator Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CFDEN</name>
              <description>Clock Failure Detector Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_MCFR</name>
          <description>Main Clock Frequency Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MAINF</name>
              <description>Main Clock Frequency</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MAINFRDY</name>
              <description>Main Clock Ready</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_PLLAR</name>
          <description>PLLA Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00003F00</resetValue>
          <fields>
            <field>
              <name>DIVA</name>
              <description>Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PLLACOUNT</name>
              <description>PLLA Counter</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MULA</name>
              <description>PLLA Multiplier</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONE</name>
              <description>Must Be Set to 1</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_MCKR</name>
          <description>Master Clock Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>CSS</name>
              <description>Master Clock Source Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOW_CLK</name>
                  <description>Slow Clock is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MAIN_CLK</name>
                  <description>Main Clock is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLA_CLK</name>
                  <description>PLLA Clock is selected</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPLL_CLK</name>
                  <description>UPLL Clock is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRES</name>
              <description>Processor Clock Prescaler</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLK_1</name>
                  <description>Selected clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_2</name>
                  <description>Selected clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_4</name>
                  <description>Selected clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_8</name>
                  <description>Selected clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_16</name>
                  <description>Selected clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_32</name>
                  <description>Selected clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_64</name>
                  <description>Selected clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_3</name>
                  <description>Selected clock divided by 3</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PLLADIV2</name>
              <description>PLLA Divisor by 2</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPLLDIV2</name>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_USB</name>
          <description>USB Clock Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USBS</name>
              <description>USB Input Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USBDIV</name>
              <description>Divider for USB Clock.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>3</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-2</dimIndex>
          <name>PMC_PCK%s</name>
          <description>Programmable Clock 0 Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CSS</name>
              <description>Master Clock Source Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOW_CLK</name>
                  <description>Slow Clock is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MAIN_CLK</name>
                  <description>Main Clock is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLA_CLK</name>
                  <description>PLLA Clock is selected</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPLL_CLK</name>
                  <description>UPLL Clock is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock is selected</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRES</name>
              <description>Programmable Clock Prescaler</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLK_1</name>
                  <description>Selected clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_2</name>
                  <description>Selected clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_4</name>
                  <description>Selected clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_8</name>
                  <description>Selected clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_16</name>
                  <description>Selected clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_32</name>
                  <description>Selected clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_64</name>
                  <description>Selected clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKU</name>
              <description>UTMI PLL Lock Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY2</name>
              <description>Programmable Clock Ready 2 Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKU</name>
              <description>UTMI PLL Lock Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY2</name>
              <description>Programmable Clock Ready 2 Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00010008</resetValue>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main XTAL Oscillator Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKU</name>
              <description>UTMI PLL Lock Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OSCSELS</name>
              <description>Slow Clock Oscillator Selection</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY2</name>
              <description>Programmable Clock Ready Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Oscillator Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDS</name>
              <description>Clock Failure Detector Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FOS</name>
              <description>Clock Failure Detector Fault Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKU</name>
              <description>UTMI PLL Lock Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY2</name>
              <description>Programmable Clock Ready 2 Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_FSMR</name>
          <description>Fast Startup Mode Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FSTT0</name>
              <description>Fast Startup Input Enable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT1</name>
              <description>Fast Startup Input Enable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT2</name>
              <description>Fast Startup Input Enable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT3</name>
              <description>Fast Startup Input Enable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT4</name>
              <description>Fast Startup Input Enable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT5</name>
              <description>Fast Startup Input Enable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT6</name>
              <description>Fast Startup Input Enable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT7</name>
              <description>Fast Startup Input Enable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT8</name>
              <description>Fast Startup Input Enable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT9</name>
              <description>Fast Startup Input Enable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT10</name>
              <description>Fast Startup Input Enable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT11</name>
              <description>Fast Startup Input Enable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT12</name>
              <description>Fast Startup Input Enable 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT13</name>
              <description>Fast Startup Input Enable 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT14</name>
              <description>Fast Startup Input Enable 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTT15</name>
              <description>Fast Startup Input Enable 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RTTAL</name>
              <description>RTT Alarm Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RTCAL</name>
              <description>RTC Alarm Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USBAL</name>
              <description>USB Alarm Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LPM</name>
              <description>Low Power Mode</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_FSPR</name>
          <description>Fast Startup Polarity Register</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FSTP0</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP1</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP2</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP3</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP4</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP5</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP6</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP7</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP8</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP9</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP10</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP11</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP12</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP13</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP14</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSTP15</name>
              <description>Fast Startup Input Polarityx</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_FOCR</name>
          <description>Fault Output Clear Register</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FOCLR</name>
              <description>Fault Output Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCER1</name>
          <description>Peripheral Clock Enable Register 1</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID32</name>
              <description>Peripheral Clock 32 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID33</name>
              <description>Peripheral Clock 33 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID34</name>
              <description>Peripheral Clock 34 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID35</name>
              <description>Peripheral Clock 35 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID36</name>
              <description>Peripheral Clock 36 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID37</name>
              <description>Peripheral Clock 37 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID38</name>
              <description>Peripheral Clock 38 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID39</name>
              <description>Peripheral Clock 39 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID40</name>
              <description>Peripheral Clock 40 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID41</name>
              <description>Peripheral Clock 41 Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID42</name>
              <description>Peripheral Clock 42 Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID43</name>
              <description>Peripheral Clock 43 Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID44</name>
              <description>Peripheral Clock 44 Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCDR1</name>
          <description>Peripheral Clock Disable Register 1</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID32</name>
              <description>Peripheral Clock 32 Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID33</name>
              <description>Peripheral Clock 33 Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID34</name>
              <description>Peripheral Clock 34 Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID35</name>
              <description>Peripheral Clock 35 Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID36</name>
              <description>Peripheral Clock 36 Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID37</name>
              <description>Peripheral Clock 37 Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID38</name>
              <description>Peripheral Clock 38 Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID39</name>
              <description>Peripheral Clock 39 Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID40</name>
              <description>Peripheral Clock 40 Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID41</name>
              <description>Peripheral Clock 41 Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID42</name>
              <description>Peripheral Clock 42 Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID43</name>
              <description>Peripheral Clock 43 Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID44</name>
              <description>Peripheral Clock 44 Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCSR1</name>
          <description>Peripheral Clock Status Register 1</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PID32</name>
              <description>Peripheral Clock 32 Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID33</name>
              <description>Peripheral Clock 33 Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID34</name>
              <description>Peripheral Clock 34 Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID35</name>
              <description>Peripheral Clock 35 Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID36</name>
              <description>Peripheral Clock 36 Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID37</name>
              <description>Peripheral Clock 37 Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID38</name>
              <description>Peripheral Clock 38 Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID39</name>
              <description>Peripheral Clock 39 Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID40</name>
              <description>Peripheral Clock 40 Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID41</name>
              <description>Peripheral Clock 41 Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID42</name>
              <description>Peripheral Clock 42 Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID43</name>
              <description>Peripheral Clock 43 Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID44</name>
              <description>Peripheral Clock 44 Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCR</name>
          <description>Peripheral Control Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PID</name>
              <description>Peripheral ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CMD</name>
              <description>Command</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIV</name>
              <description>Divisor Value</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PERIPH_DIV_MCK</name>
                  <description>Peripheral clock is MCK</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIPH_DIV2_MCK</name>
                  <description>Peripheral clock is MCK/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIPH_DIV4_MCK</name>
                  <description>Peripheral clock is MCK/4</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EN</name>
              <description>Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UART</name>
      <version>6418E</version>
      <description>Universal Asynchronous Receiver Transmitter</description>
      <prependToName>UART_</prependToName>
      <baseAddress>0x400E0800</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x128</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_UART</name>
        <value>8</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Space: parity forced to 0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Mark: parity forced to 1</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Enable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Enable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Enable End of Receive Transfer Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Enable End of Transmit Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Enable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Enable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Enable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Enable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Enable Buffer Empty Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Enable Buffer Full Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Disable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Disable End of Receive Transfer Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Disable End of Transmit Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Disable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Disable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Disable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Disable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Disable Buffer Empty Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Disable Buffer Full Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Mask RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Mask End of Receive Transfer Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Mask End of Transmit Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Mask Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Mask Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Mask Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Mask TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Mask TXBUFE Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Mask RXBUFF Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDRX</name>
              <description>End of Receiver Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDTX</name>
              <description>End of Transmitter Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXBUFE</name>
              <description>Transmission Buffer Empty</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBUFF</name>
              <description>Receive Buffer Full</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divisor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RPR</name>
          <description>Receive Pointer Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXPTR</name>
              <description>Receive Pointer Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCR</name>
          <description>Receive Counter Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCTR</name>
              <description>Receive Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR</name>
          <description>Transmit Pointer Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXPTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCR</name>
          <description>Transmit Counter Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCTR</name>
              <description>Transmit Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNPR</name>
          <description>Receive Next Pointer Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNPTR</name>
              <description>Receive Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RNCR</name>
          <description>Receive Next Counter Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXNCTR</name>
              <description>Receive Next Counter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNPR</name>
          <description>Transmit Next Pointer Register</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNPTR</name>
              <description>Transmit Next Pointer</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TNCR</name>
          <description>Transmit Next Counter Register</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXNCTR</name>
              <description>Transmit Counter Next</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTCR</name>
          <description>Transfer Control Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXTDIS</name>
              <description>Receiver Transfer Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXTDIS</name>
              <description>Transmitter Transfer Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PTSR</name>
          <description>Transfer Status Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXTEN</name>
              <description>Receiver Transfer Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXTEN</name>
              <description>Transmitter Transfer Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CHIPID</name>
      <version>6417K</version>
      <description>Chip Identifier</description>
      <prependToName>CHIPID_</prependToName>
      <baseAddress>0x400E0940</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CIDR</name>
          <description>Chip ID Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>VERSION</name>
              <description>Version of the Device</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EPROC</name>
              <description>Embedded Processor</description>
              <bitOffset>5</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ARM946ES</name>
                  <description>ARM946ES</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM7TDMI</name>
                  <description>ARM7TDMI</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CM3</name>
                  <description>Cortex-M3</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM920T</name>
                  <description>ARM920T</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM926EJS</name>
                  <description>ARM926EJS</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CA5</name>
                  <description>Cortex-A5</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CM4</name>
                  <description>Cortex-M4</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPSIZ</name>
              <description>Nonvolatile Program Memory Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024K</name>
                  <description>1024K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048K</name>
                  <description>2048K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPSIZ2</name>
              <description>Second Nonvolatile Program Memory Size</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024K</name>
                  <description>1024K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048K</name>
                  <description>2048K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRAMSIZ</name>
              <description>Internal SRAM Size</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>48K</name>
                  <description>48K bytes</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1K</name>
                  <description>1K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2K</name>
                  <description>2K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6K</name>
                  <description>6K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24K</name>
                  <description>24K bytes</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4K</name>
                  <description>4K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>80K</name>
                  <description>80K bytes</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>160K</name>
                  <description>160K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>96K</name>
                  <description>96K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ARCH</name>
              <description>Architecture Identifier</description>
              <bitOffset>20</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AT91SAM9xx</name>
                  <description>AT91SAM9xx Series</description>
                  <value>0x19</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM9XExx</name>
                  <description>AT91SAM9XExx Series</description>
                  <value>0x29</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x34</name>
                  <description>AT91x34 Series</description>
                  <value>0x34</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP7</name>
                  <description>CAP7 Series</description>
                  <value>0x37</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP9</name>
                  <description>CAP9 Series</description>
                  <value>0x39</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP11</name>
                  <description>CAP11 Series</description>
                  <value>0x3B</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x40</name>
                  <description>AT91x40 Series</description>
                  <value>0x40</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x42</name>
                  <description>AT91x42 Series</description>
                  <value>0x42</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x55</name>
                  <description>AT91x55 Series</description>
                  <value>0x55</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Axx</name>
                  <description>AT91SAM7Axx Series</description>
                  <value>0x60</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7AQxx</name>
                  <description>AT91SAM7AQxx Series</description>
                  <value>0x61</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x63</name>
                  <description>AT91x63 Series</description>
                  <value>0x63</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Sxx</name>
                  <description>AT91SAM7Sxx Series</description>
                  <value>0x70</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7XCxx</name>
                  <description>AT91SAM7XCxx Series</description>
                  <value>0x71</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7SExx</name>
                  <description>AT91SAM7SExx Series</description>
                  <value>0x72</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Lxx</name>
                  <description>AT91SAM7Lxx Series</description>
                  <value>0x73</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Xxx</name>
                  <description>AT91SAM7Xxx Series</description>
                  <value>0x75</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7SLxx</name>
                  <description>AT91SAM7SLxx Series</description>
                  <value>0x76</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3UxC</name>
                  <description>SAM3UxC Series (100-pin version)</description>
                  <value>0x80</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3UxE</name>
                  <description>SAM3UxE Series (144-pin version)</description>
                  <value>0x81</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3AxC</name>
                  <description>SAM3AxC Series (100-pin version)</description>
                  <value>0x83</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4AxC</name>
                  <description>SAM4AxC Series (100-pin version)</description>
                  <value>0x83</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3XxC</name>
                  <description>SAM3XxC Series (100-pin version)</description>
                  <value>0x84</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4XxC</name>
                  <description>SAM4XxC Series (100-pin version)</description>
                  <value>0x84</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3XxE</name>
                  <description>SAM3XxE Series (144-pin version)</description>
                  <value>0x85</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4XxE</name>
                  <description>SAM4XxE Series (144-pin version)</description>
                  <value>0x85</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3XxG</name>
                  <description>SAM3XxG Series (208/217-pin version)</description>
                  <value>0x86</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4XxG</name>
                  <description>SAM4XxG Series (208/217-pin version)</description>
                  <value>0x86</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3SxA</name>
                  <description>SAM3SxASeries (48-pin version)</description>
                  <value>0x88</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4SxA</name>
                  <description>SAM4SxA Series (48-pin version)</description>
                  <value>0x88</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3SxB</name>
                  <description>SAM3SxB Series (64-pin version)</description>
                  <value>0x89</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4SxB</name>
                  <description>SAM4SxB Series (64-pin version)</description>
                  <value>0x89</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3SxC</name>
                  <description>SAM3SxC Series (100-pin version)</description>
                  <value>0x8A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM4SxC</name>
                  <description>SAM4SxC Series (100-pin version)</description>
                  <value>0x8A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x92</name>
                  <description>AT91x92 Series</description>
                  <value>0x92</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3NxA</name>
                  <description>SAM3NxA Series (48-pin version)</description>
                  <value>0x93</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3NxB</name>
                  <description>SAM3NxB Series (64-pin version)</description>
                  <value>0x94</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3NxC</name>
                  <description>SAM3NxC Series (100-pin version)</description>
                  <value>0x95</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3SDxB</name>
                  <description>SAM3SDxB Series (64-pin version)</description>
                  <value>0x99</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM3SDxC</name>
                  <description>SAM3SDxC Series (100-pin version)</description>
                  <value>0x9A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SAM5A</name>
                  <description>SAM5A</description>
                  <value>0xA5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT75Cxx</name>
                  <description>AT75Cxx Series</description>
                  <value>0xF0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPTYP</name>
              <description>Nonvolatile Program Memory Type</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ROM</name>
                  <description>ROM</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROMLESS</name>
                  <description>ROMless or on-chip Flash</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FLASH</name>
                  <description>Embedded Flash Memory</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROM_FLASH</name>
                  <description>ROM and Embedded Flash MemoryNVPSIZ is ROM size      NVPSIZ2 is Flash size</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SRAM</name>
                  <description>SRAM emulating ROM</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXT</name>
              <description>Extension Flag</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EXID</name>
          <description>Chip ID Extension Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>EXID</name>
              <description>Chip ID Extension</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>EFC0</name>
      <version>6450E</version>
      <description>Embedded Flash Controller 0</description>
      <groupName>EFC</groupName>
      <prependToName>EFC0_</prependToName>
      <baseAddress>0x400E0A00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_EFC0</name>
        <value>6</value>
      </interrupt>
      <registers>
        <register>
          <name>FMR</name>
          <description>EEFC Flash Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FRDY</name>
              <description>Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FWS</name>
              <description>Flash Wait State</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCOD</name>
              <description>Sequential Code Optimization Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FAM</name>
              <description>Flash Access Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FCR</name>
          <description>EEFC Flash Command Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FCMD</name>
              <description>Flash Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FARG</name>
              <description>Flash Command Argument</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FKEY</name>
              <description>Flash Writing Protection Key</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FSR</name>
          <description>EEFC Flash Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>FRDY</name>
              <description>Flash Ready Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCMDE</name>
              <description>Flash Command Error Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FLOCKE</name>
              <description>Flash Lock Error Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRR</name>
          <description>EEFC Flash Result Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FVALUE</name>
              <description>Flash Result Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>EFC1</name>
      <version>6450E</version>
      <description>Embedded Flash Controller 1</description>
      <groupName>EFC</groupName>
      <prependToName>EFC1_</prependToName>
      <baseAddress>0x400E0C00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_EFC1</name>
        <value>7</value>
      </interrupt>
      <registers>
        <register>
          <name>FMR</name>
          <description>EEFC Flash Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FRDY</name>
              <description>Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FWS</name>
              <description>Flash Wait State</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCOD</name>
              <description>Sequential Code Optimization Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FAM</name>
              <description>Flash Access Mode</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FCR</name>
          <description>EEFC Flash Command Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FCMD</name>
              <description>Flash Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FARG</name>
              <description>Flash Command Argument</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FKEY</name>
              <description>Flash Writing Protection Key</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FSR</name>
          <description>EEFC Flash Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>FRDY</name>
              <description>Flash Ready Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FCMDE</name>
              <description>Flash Command Error Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FLOCKE</name>
              <description>Flash Lock Error Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRR</name>
          <description>EEFC Flash Result Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FVALUE</name>
              <description>Flash Result Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOA</name>
      <version>6315C</version>
      <description>Parallel Input/Output Controller A</description>
      <groupName>PIO</groupName>
      <prependToName>PIOA_</prependToName>
      <baseAddress>0x400E0E00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PIOA</name>
        <value>11</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ABSR</name>
          <description>Peripheral AB Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral A Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral A Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral A Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral A Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral A Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral A Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral A Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral A Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral A Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral A Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral A Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral A Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral A Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral A Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral A Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral A Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral A Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral A Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral A Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral A Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral A Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral A Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral A Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral A Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral A Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral A Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral A Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral A Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral A Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral A Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral A Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral A Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCIFSR</name>
          <description>System Clock Glitch Input Filter Select Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIFSR</name>
          <description>Debouncing Input Filter Select Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDGSR</name>
          <description>Glitch or Debouncing Input Filter Clock Selection Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Slow Clock Divider Selection for Debouncing</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOB</name>
      <version>6315C</version>
      <description>Parallel Input/Output Controller B</description>
      <groupName>PIO</groupName>
      <prependToName>PIOB_</prependToName>
      <baseAddress>0x400E1000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PIOB</name>
        <value>12</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ABSR</name>
          <description>Peripheral AB Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral A Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral A Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral A Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral A Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral A Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral A Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral A Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral A Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral A Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral A Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral A Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral A Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral A Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral A Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral A Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral A Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral A Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral A Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral A Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral A Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral A Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral A Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral A Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral A Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral A Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral A Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral A Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral A Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral A Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral A Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral A Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral A Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCIFSR</name>
          <description>System Clock Glitch Input Filter Select Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIFSR</name>
          <description>Debouncing Input Filter Select Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDGSR</name>
          <description>Glitch or Debouncing Input Filter Clock Selection Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Slow Clock Divider Selection for Debouncing</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOC</name>
      <version>6315C</version>
      <description>Parallel Input/Output Controller C</description>
      <groupName>PIO</groupName>
      <prependToName>PIOC_</prependToName>
      <baseAddress>0x400E1200</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PIOC</name>
        <value>13</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ABSR</name>
          <description>Peripheral AB Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral A Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral A Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral A Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral A Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral A Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral A Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral A Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral A Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral A Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral A Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral A Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral A Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral A Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral A Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral A Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral A Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral A Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral A Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral A Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral A Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral A Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral A Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral A Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral A Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral A Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral A Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral A Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral A Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral A Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral A Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral A Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral A Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCIFSR</name>
          <description>System Clock Glitch Input Filter Select Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIFSR</name>
          <description>Debouncing Input Filter Select Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDGSR</name>
          <description>Glitch or Debouncing Input Filter Clock Selection Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Slow Clock Divider Selection for Debouncing</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOD</name>
      <version>6315C</version>
      <description>Parallel Input/Output Controller D</description>
      <groupName>PIO</groupName>
      <prependToName>PIOD_</prependToName>
      <baseAddress>0x400E1400</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ID_PIOD</name>
        <value>14</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ABSR</name>
          <description>Peripheral AB Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral A Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral A Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral A Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral A Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral A Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral A Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral A Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral A Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral A Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral A Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral A Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral A Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral A Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral A Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral A Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral A Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral A Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral A Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral A Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral A Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral A Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral A Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral A Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral A Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral A Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral A Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral A Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral A Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral A Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral A Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral A Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral A Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCIFSR</name>
          <description>System Clock Glitch Input Filter Select Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>System Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIFSR</name>
          <description>Debouncing Input Filter Select Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDGSR</name>
          <description>Glitch or Debouncing Input Filter Clock Selection Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Slow Clock Divider Selection for Debouncing</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RSTC</name>
      <version>11009A</version>
      <description>Reset Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>RSTC_</prependToName>
      <baseAddress>0x400E1A00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x10</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PROCRST</name>
              <description>Processor Reset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PERRST</name>
              <description>Peripheral Reset</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EXTRST</name>
              <description>External Reset</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>URSTS</name>
              <description>User Reset Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTTYP</name>
              <description>Reset Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NRSTL</name>
              <description>NRST Pin Level</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SRCMP</name>
              <description>Software Reset Command in Progress</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>URSTEN</name>
              <description>User Reset Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>URSTIEN</name>
              <description>User Reset Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ERSTL</name>
              <description>External Reset Length</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SUPC</name>
      <version>6452L</version>
      <description>Supply Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>SUPC_</prependToName>
      <baseAddress>0x400E1A10</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x18</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Supply Controller Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>VROFF</name>
              <description>Voltage Regulator Off</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_EFFECT</name>
                  <description>no effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>STOP_VREG</name>
                  <description>if KEY is correct, asserts vddcore_nreset and stops the voltage regulator.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>XTALSEL</name>
              <description>Crystal Oscillator Select</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_EFFECT</name>
                  <description>no effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CRYSTAL_SEL</name>
                  <description>if KEY is correct, switches the slow clock on the crystal oscillator output.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMMR</name>
          <description>Supply Controller Supply Monitor Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SMTH</name>
              <description>Supply Monitor Threshold</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_9V</name>
                  <description>1.9 V</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_0V</name>
                  <description>2.0 V</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_1V</name>
                  <description>2.1 V</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_2V</name>
                  <description>2.2 V</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_3V</name>
                  <description>2.3 V</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_4V</name>
                  <description>2.4 V</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_5V</name>
                  <description>2.5 V</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_6V</name>
                  <description>2.6 V</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_7V</name>
                  <description>2.7 V</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_8V</name>
                  <description>2.8 V</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_9V</name>
                  <description>2.9 V</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_0V</name>
                  <description>3.0 V</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_1V</name>
                  <description>3.1 V</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_2V</name>
                  <description>3.2 V</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_3V</name>
                  <description>3.3 V</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_4V</name>
                  <description>3.4 V</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMSMPL</name>
              <description>Supply Monitor Sampling Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SMD</name>
                  <description>Supply Monitor disabled</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CSM</name>
                  <description>Continuous Supply Monitor</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32SLCK</name>
                  <description>Supply Monitor enabled one SLCK period every 32 SLCK periods</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256SLCK</name>
                  <description>Supply Monitor enabled one SLCK period every 256 SLCK periods</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048SLCK</name>
                  <description>Supply Monitor enabled one SLCK period every 2,048 SLCK periods</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMRSTEN</name>
              <description>Supply Monitor Reset Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMIEN</name>
              <description>Supply Monitor Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the SUPC interrupt signal is not affected when a supply monitor detection occurs.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the SUPC interrupt signal is asserted when a supply monitor detection occurs.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Supply Controller Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00005A00</resetValue>
          <fields>
            <field>
              <name>BODRSTEN</name>
              <description>Brownout Detector Reset Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the core reset signal, vddcore_nreset is asserted when a brownout detection occurs.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BODDIS</name>
              <description>Brownout Detector Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the core brownout detector is enabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>the core brownout detector is disabled.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>VDDIORDYONREG</name>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSCBYPASS</name>
              <description>Oscillator Bypass</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_EFFECT</name>
                  <description>no effect. Clock selection depends on XTALSEL value.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BYPASS</name>
                  <description>the 32-KHz XTAL oscillator is selected and is put in bypass mode.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>KEY</name>
              <description>Password Key</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WUMR</name>
          <description>Supply Controller Wake Up Mode Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FWUPEN</name>
              <description>Force Wake Up Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the Force Wake Up pin has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the Force Wake Up pin low forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMEN</name>
              <description>Supply Monitor Wake Up Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the supply monitor detection has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the supply monitor detection forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RTTEN</name>
              <description>Real Time Timer Wake Up Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the RTT alarm signal has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the RTT alarm signal forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RTCEN</name>
              <description>Real Time Clock Wake Up Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the RTC alarm signal has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the RTC alarm signal forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FWUPDBC</name>
              <description>Force Wake Up Debouncer Period</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>IMMEDIATE</name>
                  <description>Immediate, no debouncing, detected active at least on one Slow Clock edge.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_SCLK</name>
                  <description>FWUP shall be low for at least 3 SLCK periods</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32_SCLK</name>
                  <description>FWUP shall be low for at least 32 SLCK periods</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512_SCLK</name>
                  <description>FWUP shall be low for at least 512 SLCK periods</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096_SCLK</name>
                  <description>FWUP shall be low for at least 4,096 SLCK periods</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32768_SCLK</name>
                  <description>FWUP shall be low for at least 32,768 SLCK periods</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPDBC</name>
              <description>Wake Up Inputs Debouncer Period</description>
              <bitOffset>12</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>IMMEDIATE</name>
                  <description>Immediate, no debouncing, detected active at least on one Slow Clock edge.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_SCLK</name>
                  <description>WKUPx shall be in its active state for at least 3 SLCK periods</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32_SCLK</name>
                  <description>WKUPx shall be in its active state for at least 32 SLCK periods</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512_SCLK</name>
                  <description>WKUPx shall be in its active state for at least 512 SLCK periods</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096_SCLK</name>
                  <description>WKUPx shall be in its active state for at least 4,096 SLCK periods</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32768_SCLK</name>
                  <description>WKUPx shall be in its active state for at least 32,768 SLCK periods</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>WUIR</name>
          <description>Supply Controller Wake Up Inputs Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WKUPEN0</name>
              <description>Wake Up Input Enable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN1</name>
              <description>Wake Up Input Enable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN2</name>
              <description>Wake Up Input Enable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN3</name>
              <description>Wake Up Input Enable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN4</name>
              <description>Wake Up Input Enable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN5</name>
              <description>Wake Up Input Enable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN6</name>
              <description>Wake Up Input Enable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN7</name>
              <description>Wake Up Input Enable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN8</name>
              <description>Wake Up Input Enable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN9</name>
              <description>Wake Up Input Enable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN10</name>
              <description>Wake Up Input Enable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN11</name>
              <description>Wake Up Input Enable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN12</name>
              <description>Wake Up Input Enable 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN13</name>
              <description>Wake Up Input Enable 13</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN14</name>
              <description>Wake Up Input Enable 14</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPEN15</name>
              <description>Wake Up Input Enable 15</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_ENABLE</name>
                  <description>the corresponding wake-up input has no wake up effect.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT0</name>
              <description>Wake Up Input Transition 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT1</name>
              <description>Wake Up Input Transition 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT2</name>
              <description>Wake Up Input Transition 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT3</name>
              <description>Wake Up Input Transition 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT4</name>
              <description>Wake Up Input Transition 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT5</name>
              <description>Wake Up Input Transition 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT6</name>
              <description>Wake Up Input Transition 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT7</name>
              <description>Wake Up Input Transition 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT8</name>
              <description>Wake Up Input Transition 8</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT9</name>
              <description>Wake Up Input Transition 9</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT10</name>
              <description>Wake Up Input Transition 10</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT11</name>
              <description>Wake Up Input Transition 11</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT12</name>
              <description>Wake Up Input Transition 12</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT13</name>
              <description>Wake Up Input Transition 13</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT14</name>
              <description>Wake Up Input Transition 14</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPT15</name>
              <description>Wake Up Input Transition 15</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH_TO_LOW</name>
                  <description>a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW_TO_HIGH</name>
                  <description>a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Supply Controller Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000800</resetValue>
          <fields>
            <field>
              <name>FWUPS</name>
              <description>FWUP Wake Up Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no wake up due to the assertion of the FWUP pin has occurred since the last read of SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one wake up due to the assertion of the FWUP pin has occurred since the last read of SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPS</name>
              <description>WKUP Wake Up Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMWS</name>
              <description>Supply Monitor Detection Wake Up Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no wake up due to a supply monitor detection has occurred since the last read of SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one wake up due to a supply monitor detection has occurred since the last read of SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BODRSTS</name>
              <description>Brownout Detector Reset Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no core brownout rising edge event has been detected since the last read of the SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one brownout output rising edge event has been detected since the last read of the SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMRSTS</name>
              <description>Supply Monitor Reset Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no supply monitor detection has generated a core reset since the last read of the SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMS</name>
              <description>Supply Monitor Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO</name>
                  <description>no supply monitor detection since the last read of SUPC_SR.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PRESENT</name>
                  <description>at least one supply monitor detection since the last read of SUPC_SR.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SMOS</name>
              <description>Supply Monitor Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>the supply monitor detected VDDUTMI higher than its threshold at its last measurement.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>the supply monitor detected VDDUTMI lower than its threshold at its last measurement.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OSCSEL</name>
              <description>32-kHz Oscillator Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CRYST</name>
                  <description>the slow clock, SLCK is generated by the 32-kHz crystal oscillator.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FWUPIS</name>
              <description>FWUP Input Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>FWUP input is tied low.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>FWUP input is tied high.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS0</name>
              <description>WKUP Input Status 0</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS1</name>
              <description>WKUP Input Status 1</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS2</name>
              <description>WKUP Input Status 2</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS3</name>
              <description>WKUP Input Status 3</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS4</name>
              <description>WKUP Input Status 4</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS5</name>
              <description>WKUP Input Status 5</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS6</name>
              <description>WKUP Input Status 6</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS7</name>
              <description>WKUP Input Status 7</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS8</name>
              <description>WKUP Input Status 8</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS9</name>
              <description>WKUP Input Status 9</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS10</name>
              <description>WKUP Input Status 10</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS11</name>
              <description>WKUP Input Status 11</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS12</name>
              <description>WKUP Input Status 12</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS13</name>
              <description>WKUP Input Status 13</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS14</name>
              <description>WKUP Input Status 14</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WKUPIS15</name>
              <description>WKUP Input Status 15</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIS</name>
                  <description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN</name>
                  <description>the corresponding wake-up input was active at the time the debouncer triggered a wake up event.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RTT</name>
      <version>6081F</version>
      <description>Real-time Timer</description>
      <groupName>SYSC</groupName>
      <prependToName>RTT_</prependToName>
      <baseAddress>0x400E1A30</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x10</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00008000</resetValue>
          <fields>
            <field>
              <name>RTPRES</name>
              <description>Real-time Timer Prescaler Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ALMIEN</name>
              <description>Alarm Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RTTINCIEN</name>
              <description>Real-time Timer Increment Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RTTRST</name>
              <description>Real-time Timer Restart</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AR</name>
          <description>Alarm Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>ALMV</name>
              <description>Alarm Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>VR</name>
          <description>Value Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CRTV</name>
              <description>Current Real-time Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ALMS</name>
              <description>Real-time Alarm Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTTINC</name>
              <description>Real-time Timer Increment</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>WDT</name>
      <version>6080B</version>
      <description>Watchdog Timer</description>
      <groupName>SYSC</groupName>
      <prependToName>WDT_</prependToName>
      <baseAddress>0x400E1A50</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x10</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>WDRSTT</name>
              <description>Watchdog Restart</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x3FFF2FFF</resetValue>
          <fields>
            <field>
              <name>WDV</name>
              <description>Watchdog Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDFIEN</name>
              <description>Watchdog Fault Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRSTEN</name>
              <description>Watchdog Reset Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRPROC</name>
              <description>Watchdog Reset Processor</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDDIS</name>
              <description>Watchdog Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDD</name>
              <description>Watchdog Delta Value</description>
              <bitOffset>16</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDDBGHLT</name>
              <description>Watchdog Debug Halt</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDIDLEHLT</name>
              <description>Watchdog Idle Halt</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WDUNF</name>
              <description>Watchdog Underflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WDERR</name>
              <description>Watchdog Error</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RTC</name>
      <version>6056I</version>
      <description>Real-time Clock</description>
      <groupName>SYSC</groupName>
      <prependToName>RTC_</prependToName>
      <baseAddress>0x400E1A60</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0xE8</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPDTIM</name>
              <description>Update Request Time Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPDCAL</name>
              <description>Update Request Calendar Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMEVSEL</name>
              <description>Time Event Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MINUTE</name>
                  <description>Minute change</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HOUR</name>
                  <description>Hour change</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MIDNIGHT</name>
                  <description>Every day at midnight</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NOON</name>
                  <description>Every day at noon</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALEVSEL</name>
              <description>Calendar Event Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>WEEK</name>
                  <description>Week change (every Monday at time 00:00:00)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MONTH</name>
                  <description>Month change (every 01 of each month at time 00:00:00)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>YEAR</name>
                  <description>Year change (every January 1 at time 00:00:00)</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HRMOD</name>
              <description>12-/24-hour Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMR</name>
          <description>Time Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SEC</name>
              <description>Current Second</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIN</name>
              <description>Current Minute</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUR</name>
              <description>Current Hour</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AMPM</name>
              <description>Ante Meridiem Post Meridiem Indicator</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CALR</name>
          <description>Calendar Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01210720</resetValue>
          <fields>
            <field>
              <name>CENT</name>
              <description>Current Century</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>YEAR</name>
              <description>Current Year</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MONTH</name>
              <description>Current Month</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DAY</name>
              <description>Current Day in Current Week</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATE</name>
              <description>Current Day in Current Month</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMALR</name>
          <description>Time Alarm Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SEC</name>
              <description>Second Alarm</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SECEN</name>
              <description>Second Alarm Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIN</name>
              <description>Minute Alarm</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MINEN</name>
              <description>Minute Alarm Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUR</name>
              <description>Hour Alarm</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AMPM</name>
              <description>AM/PM Indicator</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUREN</name>
              <description>Hour Alarm Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CALALR</name>
          <description>Calendar Alarm Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010000</resetValue>
          <fields>
            <field>
              <name>MONTH</name>
              <description>Month Alarm</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MTHEN</name>
              <description>Month Alarm Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATE</name>
              <description>Date Alarm</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATEEN</name>
              <description>Date Alarm Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ACKUPD</name>
              <description>Acknowledge for Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ALARM</name>
              <description>Alarm Flag</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SEC</name>
              <description>Second Event</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEV</name>
              <description>Time Event</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CALEV</name>
              <description>Calendar Event</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCCR</name>
          <description>Status Clear Command Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKCLR</name>
              <description>Acknowledge Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALRCLR</name>
              <description>Alarm Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECCLR</name>
              <description>Second Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMCLR</name>
              <description>Time Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALCLR</name>
              <description>Calendar Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKEN</name>
              <description>Acknowledge Update Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALREN</name>
              <description>Alarm Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECEN</name>
              <description>Second Event Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEN</name>
              <description>Time Event Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALEN</name>
              <description>Calendar Event Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKDIS</name>
              <description>Acknowledge Update Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALRDIS</name>
              <description>Alarm Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECDIS</name>
              <description>Second Event Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMDIS</name>
              <description>Time Event Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALDIS</name>
              <description>Calendar Event Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ACK</name>
              <description>Acknowledge Update Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ALR</name>
              <description>Alarm Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SEC</name>
              <description>Second Event Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIM</name>
              <description>Time Event Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CAL</name>
              <description>Calendar Event Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>VER</name>
          <description>Valid Entry Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NVTIM</name>
              <description>Non-valid Time</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVCAL</name>
              <description>Non-valid Calendar</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVTIMALR</name>
              <description>Non-valid Time Alarm</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVCALALR</name>
              <description>Non-valid Calendar Alarm</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>GPBR</name>
      <version>6378C</version>
      <description>General Purpose Backup Register</description>
      <groupName>SYSC</groupName>
      <prependToName>GPBR_</prependToName>
      <baseAddress>0x400E1A90</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x20</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-7</dimIndex>
          <name>GPBR%s</name>
          <description>General Purpose Backup Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPBR_VALUE</name>
              <description>Value of GPBR x</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
  </peripherals>
</device>