Expand contractions.
This commit is contained in:
Giorgos Keramidas
parent
e7655d4598
commit
b69352046d
Notes:
svn2git
2020-12-08 03:00:23 +00:00
svn path=/head/; revision=12194
1 changed files with 57 additions and 57 deletions
|
|
@ -180,7 +180,7 @@ own LAN if you want. IP addresses are assigned as follows:</para>
|
||||||
to the first serial port ('<filename>/dev/cuaa0</filename>' or '<emphasis remap=tt>COM1:</emphasis>' in
|
to the first serial port ('<filename>/dev/cuaa0</filename>' or '<emphasis remap=tt>COM1:</emphasis>' in
|
||||||
DOS-terms).</para>
|
DOS-terms).</para>
|
||||||
|
|
||||||
<para>Finally, we'll also assume that your Internet Service Provider (ISP)
|
<para>Finally, we will also assume that your Internet Service Provider (ISP)
|
||||||
automatically provides the IP addresses of both your PPP/FreeBSD side
|
automatically provides the IP addresses of both your PPP/FreeBSD side
|
||||||
as well as the ISP's side. (i.e.: Dynamic IP Addresses on both ends
|
as well as the ISP's side. (i.e.: Dynamic IP Addresses on both ends
|
||||||
of the link.) Specific details for configuring the Dial-Out side of
|
of the link.) Specific details for configuring the Dial-Out side of
|
||||||
|
|
@ -200,7 +200,7 @@ Local Area Network:</para>
|
||||||
<itemizedlist>
|
<itemizedlist>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
<para>The Host Name of the FreeBSD system; in our example it's "Curly",</para>
|
<para>The Host Name of the FreeBSD system; in our example it is "Curly",</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
|
|
@ -227,7 +227,7 @@ information to prevent trouble in subsequent steps.</para>
|
||||||
<sect1>
|
<sect1>
|
||||||
<title>Verifying the FreeBSD Host Name</title>
|
<title>Verifying the FreeBSD Host Name</title>
|
||||||
|
|
||||||
<para>It's possible that the FreeBSD host name was specified and saved
|
<para>It is possible that the FreeBSD host name was specified and saved
|
||||||
when the system was initially installed. To verify that it was, enter
|
when the system was initially installed. To verify that it was, enter
|
||||||
the following command at a prompt:</para>
|
the following command at a prompt:</para>
|
||||||
|
|
||||||
|
|
@ -243,12 +243,12 @@ ahead to <xref linkend="verify-ether-if-config">.</para>
|
||||||
|
|
||||||
<para>For example, in our sample network, we would see 'curly.my.domain'
|
<para>For example, in our sample network, we would see 'curly.my.domain'
|
||||||
as a result of the `hostname` command if the name had been set
|
as a result of the `hostname` command if the name had been set
|
||||||
correctly during, or after, installation. (At this point, don't worry
|
correctly during, or after, installation. (At this point, do not worry
|
||||||
too much about the ".my.domain" part, we'll sort this out later. The
|
too much about the ".my.domain" part, we will sort this out later. The
|
||||||
important part is the name up to the first dot.)</para>
|
important part is the name up to the first dot.)</para>
|
||||||
|
|
||||||
<para>If a host name wasn't specified when FreeBSD was installed you'll
|
<para>If a host name was not specified when FreeBSD was installed you will
|
||||||
probably see 'myname.my.domain` as a response. You'll need to edit
|
probably see 'myname.my.domain` as a response. You will need to edit
|
||||||
<filename>/etc/rc.conf</filename> to set the name of the machine.</para>
|
<filename>/etc/rc.conf</filename> to set the name of the machine.</para>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -308,7 +308,7 @@ Ultra (8216) network adapters.</para>
|
||||||
|
|
||||||
<para>Other models of network adapters may have different device names in
|
<para>Other models of network adapters may have different device names in
|
||||||
FreeBSD. Check the FAQ for specifics about your network adapter. If
|
FreeBSD. Check the FAQ for specifics about your network adapter. If
|
||||||
you're not sure of the device name of your adapter, check the FreeBSD
|
you are not sure of the device name of your adapter, check the FreeBSD
|
||||||
FAQ to determine the device name for the card you have and substitute
|
FAQ to determine the device name for the card you have and substitute
|
||||||
that name (i.e.: '<emphasis remap=tt>de0</emphasis>', '<emphasis remap=tt>zp0</emphasis>', or similar) in the following
|
that name (i.e.: '<emphasis remap=tt>de0</emphasis>', '<emphasis remap=tt>zp0</emphasis>', or similar) in the following
|
||||||
steps.</para>
|
steps.</para>
|
||||||
|
|
@ -387,7 +387,7 @@ indicators are:
|
||||||
ether 01:02:03:04:05:06</screen>
|
ether 01:02:03:04:05:06</screen>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
|
|
||||||
then the Ethernet card hasn't been configured yet.</para>
|
then the Ethernet card has not been configured yet.</para>
|
||||||
|
|
||||||
<para>If the configuration for the Ethernet interface is correct you can
|
<para>If the configuration for the Ethernet interface is correct you can
|
||||||
skip forward to <xref linkend="list-lan-hosts">.</para>
|
skip forward to <xref linkend="list-lan-hosts">.</para>
|
||||||
|
|
@ -421,7 +421,7 @@ that controls this is:</para>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>You'll need to amend this line to tell FreeBSD that you want to add
|
<para>You will need to amend this line to tell FreeBSD that you want to add
|
||||||
another device, namely the '<emphasis remap=tt>ed0</emphasis>' device. Change this line to
|
another device, namely the '<emphasis remap=tt>ed0</emphasis>' device. Change this line to
|
||||||
read:</para>
|
read:</para>
|
||||||
|
|
||||||
|
|
@ -435,7 +435,7 @@ read:</para>
|
||||||
("<emphasis remap=tt>lo0</emphasis>")
|
("<emphasis remap=tt>lo0</emphasis>")
|
||||||
and the Ethernet device ("<emphasis remap=tt>ed0</emphasis>")! </para>
|
and the Ethernet device ("<emphasis remap=tt>ed0</emphasis>")! </para>
|
||||||
|
|
||||||
<para><emphasis><emphasis remap=bf> Reminder: If your Ethernet card isn't named '<emphasis remap=tt>ed0</emphasis>', specify
|
<para><emphasis><emphasis remap=bf> Reminder: If your Ethernet card is not named '<emphasis remap=tt>ed0</emphasis>', specify
|
||||||
the correct device name here instead.</emphasis></emphasis></para>
|
the correct device name here instead.</emphasis></emphasis></para>
|
||||||
|
|
||||||
<para>If you performed the installation of FreeBSD over a network
|
<para>If you performed the installation of FreeBSD over a network
|
||||||
|
|
@ -457,7 +457,7 @@ line that says:</para>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>You'll need to add another line after that to specify the settings
|
<para>You will need to add another line after that to specify the settings
|
||||||
for your '<emphasis remap=tt>ed0</emphasis>' device.</para>
|
for your '<emphasis remap=tt>ed0</emphasis>' device.</para>
|
||||||
|
|
||||||
<para>If you performed the installation of FreeBSD over a network
|
<para>If you performed the installation of FreeBSD over a network
|
||||||
|
|
@ -465,7 +465,7 @@ connection then there may already be an '<literal>ifconfig_ed0=</literal>' line
|
||||||
after the loopback definition. If so, verify that it has the correct
|
after the loopback definition. If so, verify that it has the correct
|
||||||
values.</para>
|
values.</para>
|
||||||
|
|
||||||
<para>For our sample configuration we'll insert a line immediately after
|
<para>For our sample configuration we will insert a line immediately after
|
||||||
the loopback device definition that says:</para>
|
the loopback device definition that says:</para>
|
||||||
|
|
||||||
<para>
|
<para>
|
||||||
|
|
@ -474,7 +474,7 @@ the loopback device definition that says:</para>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>When you've finished editing <filename>/etc/rc.conf</filename> to specify and
|
<para>When you have finished editing <filename>/etc/rc.conf</filename> to specify and
|
||||||
configure the network interfaces the section should look really close
|
configure the network interfaces the section should look really close
|
||||||
to:</para>
|
to:</para>
|
||||||
|
|
||||||
|
|
@ -507,10 +507,10 @@ workstation and not as a gateway between LAN nodes and your ISP you
|
||||||
should skip forward to <xref linkend="list-lan-hosts">.</para>
|
should skip forward to <xref linkend="list-lan-hosts">.</para>
|
||||||
|
|
||||||
<para>If you intend for the PPP program to service the local FreeBSD box
|
<para>If you intend for the PPP program to service the local FreeBSD box
|
||||||
as well as LAN workstations (as a router) you'll need to enable IP
|
as well as LAN workstations (as a router) you will need to enable IP
|
||||||
forwarding.</para>
|
forwarding.</para>
|
||||||
|
|
||||||
<para>To enable IP Packet forwarding you'll need to edit the
|
<para>To enable IP Packet forwarding you will need to edit the
|
||||||
<filename>/etc/rc.conf</filename> file.</para>
|
<filename>/etc/rc.conf</filename> file.</para>
|
||||||
|
|
||||||
<para>This file contains overrides of the defaults in
|
<para>This file contains overrides of the defaults in
|
||||||
|
|
@ -553,7 +553,7 @@ always has an IP address of 127.0.0.1. <xref
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>Scroll all the way to the bottom of the file (paying attention to
|
<para>Scroll all the way to the bottom of the file (paying attention to
|
||||||
the comments along the way; there's some good information there!) and
|
the comments along the way; there is some good information there!) and
|
||||||
enter (assuming our sample network) the following IP addresses and
|
enter (assuming our sample network) the following IP addresses and
|
||||||
host names:
|
host names:
|
||||||
<informalexample>
|
<informalexample>
|
||||||
|
|
@ -568,7 +568,7 @@ System
|
||||||
<para>(No changes are needed to the line for the '<emphasis remap=tt>127.0.0.1
|
<para>(No changes are needed to the line for the '<emphasis remap=tt>127.0.0.1
|
||||||
localhost</emphasis>' entry.)</para>
|
localhost</emphasis>' entry.)</para>
|
||||||
|
|
||||||
<para>Once you've entered these lines, press the 'Esc' key to invoke the
|
<para>Once you have entered these lines, press the 'Esc' key to invoke the
|
||||||
control menu. Select "leave editor" and be sure to select "save
|
control menu. Select "leave editor" and be sure to select "save
|
||||||
changes" when prompted.</para>
|
changes" when prompted.</para>
|
||||||
|
|
||||||
|
|
@ -577,7 +577,7 @@ changes" when prompted.</para>
|
||||||
<sect1>
|
<sect1>
|
||||||
<title>Testing the FreeBSD system</title>
|
<title>Testing the FreeBSD system</title>
|
||||||
|
|
||||||
<para>Congratulations! Once you've made it to this point, the FreeBSD
|
<para>Congratulations! Once you have made it to this point, the FreeBSD
|
||||||
system is configured as a network-connected Unix system! If you made
|
system is configured as a network-connected Unix system! If you made
|
||||||
any changes to the <filename>/etc/rc.conf</filename> file you should probably
|
any changes to the <filename>/etc/rc.conf</filename> file you should probably
|
||||||
re-boot your FreeBSD system. This will accomplish two important
|
re-boot your FreeBSD system. This will accomplish two important
|
||||||
|
|
@ -651,8 +651,8 @@ names (loopback and curly) correctly correlate to their IP addresses
|
||||||
(127.0.0.1 and 192.168.1.1). This verifies that the
|
(127.0.0.1 and 192.168.1.1). This verifies that the
|
||||||
<filename>/etc/hosts</filename> files is correct.</para>
|
<filename>/etc/hosts</filename> files is correct.</para>
|
||||||
|
|
||||||
<para>If the IP address for "curly" isn't 192.168.1.1 or the address for
|
<para>If the IP address for "curly" is not 192.168.1.1 or the address for
|
||||||
"localhost" isn't 127.0.0.1, return to <xref linkend="list-lan-hosts"> and review your
|
"localhost" is not 127.0.0.1, return to <xref linkend="list-lan-hosts"> and review your
|
||||||
entries in '<filename>/etc/hosts</filename>'.</para>
|
entries in '<filename>/etc/hosts</filename>'.</para>
|
||||||
|
|
||||||
<para>If the names and addresses are indicated correctly in the result of
|
<para>If the names and addresses are indicated correctly in the result of
|
||||||
|
|
@ -697,7 +697,7 @@ inside the FreeBSD system and automagically connects and disconnects
|
||||||
with your ISP as required to make the Internet a seamless element of
|
with your ISP as required to make the Internet a seamless element of
|
||||||
your network.</para>
|
your network.</para>
|
||||||
|
|
||||||
<para>In this section we'll address the configuration(s) for both modes
|
<para>In this section we will address the configuration(s) for both modes
|
||||||
with emphasis on configuring your `ppp` environment to operate in
|
with emphasis on configuring your `ppp` environment to operate in
|
||||||
"Automatic" mode.</para>
|
"Automatic" mode.</para>
|
||||||
|
|
||||||
|
|
@ -775,12 +775,12 @@ detail.</para>
|
||||||
<para>This section will describe only the minimal configuration to get a
|
<para>This section will describe only the minimal configuration to get a
|
||||||
dial-out connection working.</para>
|
dial-out connection working.</para>
|
||||||
|
|
||||||
<para>Below is the /etc/ppp/ppp.conf file that we'll be using to provide a
|
<para>Below is the /etc/ppp/ppp.conf file that we will be using to provide a
|
||||||
dial-out Internet gateway for our example LAN:
|
dial-out Internet gateway for our example LAN:
|
||||||
|
|
||||||
<note>
|
<note>
|
||||||
<para>The full syntax for <filename>ppp.conf</filename> is described in
|
<para>The full syntax for <filename>ppp.conf</filename> is described in
|
||||||
&man.ppp.8;. Particularly, note that any line that isn't a label that
|
&man.ppp.8;. Particularly, note that any line that is not a label that
|
||||||
ends with a colon (e.g., <literal>default:</literal>,
|
ends with a colon (e.g., <literal>default:</literal>,
|
||||||
<literal>interactive:</literal>), a command that begins with
|
<literal>interactive:</literal>), a command that begins with
|
||||||
<quote>!</quote> (e.g., <literal>!include</literal>), or a comment
|
<quote>!</quote> (e.g., <literal>!include</literal>), or a comment
|
||||||
|
|
@ -851,7 +851,7 @@ implicitly added to the configuration lines to each other section.</para>
|
||||||
|
|
||||||
<para>This is a good place to put "global defaults" applicable to all
|
<para>This is a good place to put "global defaults" applicable to all
|
||||||
dial-up sessions; especially modem settings and dialing prefixes which
|
dial-up sessions; especially modem settings and dialing prefixes which
|
||||||
typically don't change based on which destination system you're
|
typically do not change based on which destination system you are
|
||||||
connecting to.</para>
|
connecting to.</para>
|
||||||
|
|
||||||
<para>Following are the descriptions of each line in the "default" section
|
<para>Following are the descriptions of each line in the "default" section
|
||||||
|
|
@ -895,7 +895,7 @@ features of the PPP program. The current version of `ppp` supports
|
||||||
data compression in accordance with draft Internet standards.
|
data compression in accordance with draft Internet standards.
|
||||||
Unfortunately many ISPs use equipment that does not support this
|
Unfortunately many ISPs use equipment that does not support this
|
||||||
capability. Since most modems try to perform on-the-fly compression
|
capability. Since most modems try to perform on-the-fly compression
|
||||||
anyway you're probably not losing much performance by disabling this
|
anyway you are probably not losing much performance by disabling this
|
||||||
feature on the FreeBSD side and denying the remote side from forcing
|
feature on the FreeBSD side and denying the remote side from forcing
|
||||||
it on you.</para>
|
it on you.</para>
|
||||||
|
|
||||||
|
|
@ -918,7 +918,7 @@ attempts by the remote end to reports line quality.</para>
|
||||||
|
|
||||||
<para>As most modern dial-up modems have automatic error correction and
|
<para>As most modern dial-up modems have automatic error correction and
|
||||||
detection and LQR reporting is not fully implemented in many vendor's
|
detection and LQR reporting is not fully implemented in many vendor's
|
||||||
products it's generally a safe bet to include these two lines in the
|
products it is generally a safe bet to include these two lines in the
|
||||||
default configuration.</para>
|
default configuration.</para>
|
||||||
|
|
||||||
<para>
|
<para>
|
||||||
|
|
@ -1010,7 +1010,7 @@ settings used to set up an "interactive" PPP session with a specific
|
||||||
remote system. Settings in this section will have the lines included
|
remote system. Settings in this section will have the lines included
|
||||||
in the "default" section included automatically.</para>
|
in the "default" section included automatically.</para>
|
||||||
|
|
||||||
<para>The example cited in this section of the guide presumes that you'll
|
<para>The example cited in this section of the guide presumes that you will
|
||||||
be connecting to a remote system that understands how to authenticate
|
be connecting to a remote system that understands how to authenticate
|
||||||
a user without any fancy scripting language. That is, this sample
|
a user without any fancy scripting language. That is, this sample
|
||||||
uses the CHAP protocol to set up the connection.</para>
|
uses the CHAP protocol to set up the connection.</para>
|
||||||
|
|
@ -1023,7 +1023,7 @@ configuration should work OK.</para>
|
||||||
Windows '95 Dial-Up Networking you need to resort to using the "Dial
|
Windows '95 Dial-Up Networking you need to resort to using the "Dial
|
||||||
Up Scripting Tool" from the Microsoft Plus! pack or you have to select
|
Up Scripting Tool" from the Microsoft Plus! pack or you have to select
|
||||||
"Bring up a terminal windows after dialing" in the Windows '95
|
"Bring up a terminal windows after dialing" in the Windows '95
|
||||||
connection options then you'll need to look at the sample PPP
|
connection options then you will need to look at the sample PPP
|
||||||
configuration files and the ppp manpage for examples of "expect /
|
configuration files and the ppp manpage for examples of "expect /
|
||||||
response" scripting to make your ISP connection. The "set login"
|
response" scripting to make your ISP connection. The "set login"
|
||||||
command is used for this purpose.</para>
|
command is used for this purpose.</para>
|
||||||
|
|
@ -1070,14 +1070,14 @@ system. </para>
|
||||||
<screen>set authkey Your_Password_On_Remote_System</screen>
|
<screen>set authkey Your_Password_On_Remote_System</screen>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
|
|
||||||
This is the password you'd use to log in to the remote system.</para>
|
This is the password you would use to log in to the remote system.</para>
|
||||||
|
|
||||||
<para>
|
<para>
|
||||||
<informalexample>
|
<informalexample>
|
||||||
<screen>set phone 1-800-123-4567</screen>
|
<screen>set phone 1-800-123-4567</screen>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
|
|
||||||
This is the phone number of the remote system. If you're inside a PBX
|
This is the phone number of the remote system. If you are inside a PBX
|
||||||
you can
|
you can
|
||||||
prepend '<emphasis remap=tt>9, </emphasis>' to the number here.</para>
|
prepend '<emphasis remap=tt>9, </emphasis>' to the number here.</para>
|
||||||
|
|
||||||
|
|
@ -1099,7 +1099,7 @@ specific requirements.</para>
|
||||||
|
|
||||||
This tells the PPP program that once the modems are connected it
|
This tells the PPP program that once the modems are connected it
|
||||||
should immediately attempt to negotiate the connection. Some remote
|
should immediately attempt to negotiate the connection. Some remote
|
||||||
sites do this automatically, some don't. This instructs your side of
|
sites do this automatically, some do not. This instructs your side of
|
||||||
the link to take the initiative and try to set up the connection.</para>
|
the link to take the initiative and try to set up the connection.</para>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -1127,7 +1127,7 @@ the configuration section which defines the "interactive"
|
||||||
configuration.</para>
|
configuration.</para>
|
||||||
|
|
||||||
<para>As noted earlier, the examples cited in this section of
|
<para>As noted earlier, the examples cited in this section of
|
||||||
the guide presume that you'll be connecting to a remote system that
|
the guide presume that you will be connecting to a remote system that
|
||||||
understands how to use the CHAP protocol to set up the connection.</para>
|
understands how to use the CHAP protocol to set up the connection.</para>
|
||||||
|
|
||||||
<para>Following are descriptions for each line in the "demand" section of
|
<para>Following are descriptions for each line in the "demand" section of
|
||||||
|
|
@ -1146,7 +1146,7 @@ system. </para>
|
||||||
<screen>set authkey Your_Password_On_Remote_System</screen>
|
<screen>set authkey Your_Password_On_Remote_System</screen>
|
||||||
</informalexample>
|
</informalexample>
|
||||||
|
|
||||||
This is the password you'd use to log in to the remote system.</para>
|
This is the password you would use to log in to the remote system.</para>
|
||||||
|
|
||||||
<para>
|
<para>
|
||||||
<informalexample>
|
<informalexample>
|
||||||
|
|
@ -1173,7 +1173,7 @@ may wish to tailor this number to your specific requirements.</para>
|
||||||
|
|
||||||
<para>This tells the PPP program that once the modems are connected it
|
<para>This tells the PPP program that once the modems are connected it
|
||||||
should immediately attempt to negotiate the connection. Some remote
|
should immediately attempt to negotiate the connection. Some remote
|
||||||
sites do this automatically, some don't. This instructs your side of
|
sites do this automatically, some do not. This instructs your side of
|
||||||
the link to take the initiative and try to set up the connection.</para>
|
the link to take the initiative and try to set up the connection.</para>
|
||||||
|
|
||||||
<para>
|
<para>
|
||||||
|
|
@ -1204,7 +1204,7 @@ between the local and remote systems when the link is established.
|
||||||
The 255.255.255.0 string tells the PPP program what Subnet mask to
|
The 255.255.255.0 string tells the PPP program what Subnet mask to
|
||||||
apply to these pseudo-interfaces.</para>
|
apply to these pseudo-interfaces.</para>
|
||||||
|
|
||||||
<para>Remember, we've assumed that your ISP provides the IP addresses for
|
<para>Remember, we have assumed that your ISP provides the IP addresses for
|
||||||
both ends of the link! If your ISP assigned you a specific IP address
|
both ends of the link! If your ISP assigned you a specific IP address
|
||||||
that you should use on your side when configuring your system, enter
|
that you should use on your side when configuring your system, enter
|
||||||
that IP address here <emphasis>instead</emphasis> of <emphasis remap=tt>127.1.1.1</emphasis>.</para>
|
that IP address here <emphasis>instead</emphasis> of <emphasis remap=tt>127.1.1.1</emphasis>.</para>
|
||||||
|
|
@ -1213,7 +1213,7 @@ that IP address here <emphasis>instead</emphasis> of <emphasis remap=tt>127.1.1.
|
||||||
his end you should enter that IP address here <emphasis>instead</emphasis> of
|
his end you should enter that IP address here <emphasis>instead</emphasis> of
|
||||||
<emphasis remap=tt>127.2.2.2</emphasis>.</para>
|
<emphasis remap=tt>127.2.2.2</emphasis>.</para>
|
||||||
|
|
||||||
<para>In both cases, it's probably a good idea to leave the '<filename>/0</filename>' on
|
<para>In both cases, it is probably a good idea to leave the '<filename>/0</filename>' on
|
||||||
the end of each address. This gives the PPP program the opportunity
|
the end of each address. This gives the PPP program the opportunity
|
||||||
to change the address(es) of the link if it <emphasis>has</emphasis> to.</para>
|
to change the address(es) of the link if it <emphasis>has</emphasis> to.</para>
|
||||||
|
|
||||||
|
|
@ -1236,7 +1236,7 @@ while idle:
|
||||||
<itemizedlist>
|
<itemizedlist>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
<para>Accept packets that FreeBSD doesn't already know how to forward,</para>
|
<para>Accept packets that FreeBSD does not already know how to forward,</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
|
|
@ -1332,7 +1332,7 @@ established using this configuration, it must:
|
||||||
</orderedlist>
|
</orderedlist>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>It's critical that those configurations in
|
<para>It is critical that those configurations in
|
||||||
'<filename>/etc/ppp/ppp.conf</filename>' which include the '<emphasis remap=tt>set ifaddr</emphasis>' and
|
'<filename>/etc/ppp/ppp.conf</filename>' which include the '<emphasis remap=tt>set ifaddr</emphasis>' and
|
||||||
'<emphasis remap=tt>add 0 0</emphasis>' statements (i.e.: those configurations used for
|
'<emphasis remap=tt>add 0 0</emphasis>' statements (i.e.: those configurations used for
|
||||||
Dial-on-Demand configurations) execute the "delete ALL" and "add 0 0
|
Dial-on-Demand configurations) execute the "delete ALL" and "add 0 0
|
||||||
|
|
@ -1428,7 +1428,7 @@ the ISP. Perform the following steps:</para>
|
||||||
|
|
||||||
<para><emphasis remap=bf>Create the Windows 95 "hosts" file:</emphasis></para>
|
<para><emphasis remap=bf>Create the Windows 95 "hosts" file:</emphasis></para>
|
||||||
|
|
||||||
<para>In order to connect to the other TCP/IP systems on the LAN you'll
|
<para>In order to connect to the other TCP/IP systems on the LAN you will
|
||||||
need to create an identical copy of the "hosts" file that you
|
need to create an identical copy of the "hosts" file that you
|
||||||
installed on the FreeBSD system in <xref linkend="list-lan-hosts">.
|
installed on the FreeBSD system in <xref linkend="list-lan-hosts">.
|
||||||
<itemizedlist>
|
<itemizedlist>
|
||||||
|
|
@ -1498,7 +1498,7 @@ settings associated with the TCP component.</para>
|
||||||
<para>Click the "Specify an IP address" radio button.
|
<para>Click the "Specify an IP address" radio button.
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>(In our example LAN the Windows 95 system is the one we've called "Larry".)</para>
|
<para>(In our example LAN the Windows 95 system is the one we have called "Larry".)</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
|
|
@ -1602,7 +1602,7 @@ files transparently across the Internet.</para>
|
||||||
</itemizedlist>
|
</itemizedlist>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para> That's it!</para>
|
<para>That is it!</para>
|
||||||
|
|
||||||
</sect1>
|
</sect1>
|
||||||
|
|
||||||
|
|
@ -1616,14 +1616,14 @@ similar to Windows 95 with minor exceptions in the user interface.</para>
|
||||||
<para>The steps shown here are appropriate for a Windows NT 4.0
|
<para>The steps shown here are appropriate for a Windows NT 4.0
|
||||||
Workstation, but the principles are the same for NT 3.5x. You may
|
Workstation, but the principles are the same for NT 3.5x. You may
|
||||||
wish to refer to the "Configuring Windows for Workgroups" section if
|
wish to refer to the "Configuring Windows for Workgroups" section if
|
||||||
you're configuring Windows NT 3.5<emphasis remap=it>x</emphasis>, since the user interface is
|
you are configuring Windows NT 3.5<emphasis remap=it>x</emphasis>, since the user interface is
|
||||||
the same for NT 3.5 and WfW.</para>
|
the same for NT 3.5 and WfW.</para>
|
||||||
|
|
||||||
<para>Perform the following steps: </para>
|
<para>Perform the following steps: </para>
|
||||||
|
|
||||||
<para><emphasis remap=bf>Create the Windows NT "hosts" file:</emphasis></para>
|
<para><emphasis remap=bf>Create the Windows NT "hosts" file:</emphasis></para>
|
||||||
|
|
||||||
<para>In order to connect to the other TCP/IP systems on the LAN you'll
|
<para>In order to connect to the other TCP/IP systems on the LAN you will
|
||||||
need to create an identical copy of the "hosts" file that you
|
need to create an identical copy of the "hosts" file that you
|
||||||
installed on the FreeBSD system in Section 3.4
|
installed on the FreeBSD system in Section 3.4
|
||||||
<itemizedlist>
|
<itemizedlist>
|
||||||
|
|
@ -1662,7 +1662,7 @@ settings</emphasis>:
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
<para>With the "Identification" tab selected, verify the "Computer Name"
|
<para>With the "Identification" tab selected, verify the "Computer Name"
|
||||||
and "Workgroup" fields. In this example we'll use "Shemp" for the name
|
and "Workgroup" fields. In this example we will use "Shemp" for the name
|
||||||
and "Stooges" for the workgroup. Click the "Change" button and amend
|
and "Stooges" for the workgroup. Click the "Change" button and amend
|
||||||
these entries as necessary.</para>
|
these entries as necessary.</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
@ -1703,7 +1703,7 @@ interface is shown.
|
||||||
text boxes.
|
text boxes.
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>In our example LAN the Windows NT system is the one we've called
|
<para>In our example LAN the Windows NT system is the one we have called
|
||||||
"Shemp"</para>
|
"Shemp"</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
|
|
@ -1802,7 +1802,7 @@ files transparently across the Internet.</para>
|
||||||
</itemizedlist>
|
</itemizedlist>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>That's it!</para>
|
<para>That is it!</para>
|
||||||
|
|
||||||
</sect1>
|
</sect1>
|
||||||
|
|
||||||
|
|
@ -1812,7 +1812,7 @@ files transparently across the Internet.</para>
|
||||||
<para>Configuring Windows for Workgroups to act as a network client
|
<para>Configuring Windows for Workgroups to act as a network client
|
||||||
requires that the Microsoft TCP/IP-32 driver diskette has been
|
requires that the Microsoft TCP/IP-32 driver diskette has been
|
||||||
installed on the workstation. The TCP/IP drivers are not included
|
installed on the workstation. The TCP/IP drivers are not included
|
||||||
with the WfW CD or diskettes; if you need a copy they're available at
|
with the WfW CD or diskettes; if you need a copy they are available at
|
||||||
<ulink URL="ftp://ftp.microsoft.com/peropsys/windows/public/tcpip/">ftp://ftp.microsoft.com/peropsys/windows/public/tcpip/</ulink>.</para>
|
<ulink URL="ftp://ftp.microsoft.com/peropsys/windows/public/tcpip/">ftp://ftp.microsoft.com/peropsys/windows/public/tcpip/</ulink>.</para>
|
||||||
|
|
||||||
<para>Once the TCP/IP drivers have been loaded, perform the following
|
<para>Once the TCP/IP drivers have been loaded, perform the following
|
||||||
|
|
@ -1820,7 +1820,7 @@ steps:</para>
|
||||||
|
|
||||||
<para><emphasis remap=bf>Create the Windows for Workgroups "hosts" file:</emphasis></para>
|
<para><emphasis remap=bf>Create the Windows for Workgroups "hosts" file:</emphasis></para>
|
||||||
|
|
||||||
<para>In order to connect to the other TCP/IP systems on the LAN you'll
|
<para>In order to connect to the other TCP/IP systems on the LAN you will
|
||||||
need to create an identical copy of the "hosts" file that you
|
need to create an identical copy of the "hosts" file that you
|
||||||
installed on the FreeBSD system in Section 3.4.
|
installed on the FreeBSD system in Section 3.4.
|
||||||
<itemizedlist>
|
<itemizedlist>
|
||||||
|
|
@ -1879,7 +1879,7 @@ blank. If it is checked, click it to remove the "X".</para>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
<para>In our example LAN the Windows for Workgroups system is the one
|
<para>In our example LAN the Windows for Workgroups system is the one
|
||||||
we've called "Moe"; in the "IP Address" field enter "192.168.1.3".</para>
|
we have called "Moe"; in the "IP Address" field enter "192.168.1.3".</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
|
|
@ -1961,7 +1961,7 @@ necessary to add all of the addresses that your ISP provided.</para>
|
||||||
</itemizedlist>
|
</itemizedlist>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>That's it!</para>
|
<para>That is it!</para>
|
||||||
|
|
||||||
</sect1>
|
</sect1>
|
||||||
</chapter>
|
</chapter>
|
||||||
|
|
@ -1969,7 +1969,7 @@ necessary to add all of the addresses that your ISP provided.</para>
|
||||||
<chapter id="testing-the-network">
|
<chapter id="testing-the-network">
|
||||||
<title>Testing the Network</title>
|
<title>Testing the Network</title>
|
||||||
|
|
||||||
<para> Once you've completed that appropriate tasks above you should have
|
<para> Once you have completed that appropriate tasks above you should have
|
||||||
a functioning PPP gateway to the Internet.</para>
|
a functioning PPP gateway to the Internet.</para>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -2001,7 +2001,7 @@ art, it is possible to set up a Mini-DNS server on the FreeBSD system
|
||||||
that also acts as your gateway to your ISP.</para>
|
that also acts as your gateway to your ISP.</para>
|
||||||
|
|
||||||
<para>Building on the files in <filename>/etc/namedb</filename> when the FreeBSD
|
<para>Building on the files in <filename>/etc/namedb</filename> when the FreeBSD
|
||||||
system was installed it's possible to create a name server that is
|
system was installed it is possible to create a name server that is
|
||||||
both authoritative for the example network shown here as well as a
|
both authoritative for the example network shown here as well as a
|
||||||
front-door to the Internet DNS architecture.</para>
|
front-door to the Internet DNS architecture.</para>
|
||||||
|
|
||||||
|
|
@ -2031,7 +2031,7 @@ Essentially, it tells the Name Server:
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
<para>What "domain names" it's responsible for, and</para>
|
<para>What "domain names" it is responsible for, and</para>
|
||||||
</listitem>
|
</listitem>
|
||||||
|
|
||||||
<listitem>
|
<listitem>
|
||||||
|
|
@ -2156,7 +2156,7 @@ start with '192.168.1.' and
|
||||||
</itemizedlist>
|
</itemizedlist>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>To add workstation entries to this file you'll need to add two
|
<para>To add workstation entries to this file you will need to add two
|
||||||
lines for each system; one in the top section where the name(s) are
|
lines for each system; one in the top section where the name(s) are
|
||||||
mapped into Internet Addresses ("IN A"), and another line that maps
|
mapped into Internet Addresses ("IN A"), and another line that maps
|
||||||
the addresses back into names in the <filename>$ORIGIN
|
the addresses back into names in the <filename>$ORIGIN
|
||||||
|
|
@ -2197,7 +2197,7 @@ command:
|
||||||
</informalexample>
|
</informalexample>
|
||||||
</para>
|
</para>
|
||||||
|
|
||||||
<para>Whenever you modify any of the files in <filename>/etc/namedb</filename> you'll
|
<para>Whenever you modify any of the files in <filename>/etc/namedb</filename> you will
|
||||||
need to kick-start the Name Server process to make it pick up the
|
need to kick-start the Name Server process to make it pick up the
|
||||||
modifications. This is performed with the following system command:
|
modifications. This is performed with the following system command:
|
||||||
<informalexample>
|
<informalexample>
|
||||||
|
|
@ -2360,7 +2360,7 @@ until ruleset '0' is defined!</emphasis></para>
|
||||||
|
|
||||||
<para>If you choose <emphasis>not</emphasis> to use Filtering Rules in the PPP
|
<para>If you choose <emphasis>not</emphasis> to use Filtering Rules in the PPP
|
||||||
configuration then <acronym>ALL</acronym> traffic will be permitted both into and
|
configuration then <acronym>ALL</acronym> traffic will be permitted both into and
|
||||||
out of your system while it's connected to your ISP.</para>
|
out of your system while it is connected to your ISP.</para>
|
||||||
|
|
||||||
<para>If you decide that you want to implement filtering rules, add the
|
<para>If you decide that you want to implement filtering rules, add the
|
||||||
above lines to your <filename>/etc/ppp/ppp.conf</filename> file in either the
|
above lines to your <filename>/etc/ppp/ppp.conf</filename> file in either the
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue