Whitespace fixes.

Punctuation chars should not be preceded by spaces.

en_US.ISO8859-1/articles/pxe/article.sgml

@@ -40,7 +40,7 @@
         accessible by any machines other than the 'Clients'.</para>
     </warning>
 
-    <para>Terminology : </para>
+    <para>Terminology:</para>
     
     <informaltable frame="none">
       <tgroup cols="2">
@@ -79,7 +79,7 @@
 
     <procedure>
       <step>
-        <para>Install DHCP : Install isc-dhcp-2.0 you can use this config file 
+        <para>Install DHCP: Install isc-dhcp-2.0 you can use this config file 
           <ulink url="http://people.FreeBSD.org/~alfred/pxe/dhcpd.conf">
           dhcpd.conf</ulink>, stick it in /usr/local/etc/</para>
       </step>
@@ -132,7 +132,7 @@
 
     <procedure>
       <step>
-        <para>Download bootfiles : Download the 
+        <para>Download bootfiles: Download the 
           <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/snapshots/i386/kern.flp">
           kern.flp</ulink> and 
           <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/snapshots/i386/mfsroot.flp"> 

en_US.ISO8859-1/articles/releng/article.sgml

@@ -223,11 +223,11 @@
       
       <para>The next step is to create a branch point
         <emphasis>tag</emphasis>, so that diffs against the start of
-        the branch are easier with CVS :</para>
+        the branch are easier with CVS:</para>
       
       <screen>/usr/src&prompt.root; <userinput>cvs rtag -rRELENG_4 RELENG_4_4_BP src</userinput></screen>
       
-      <para>And then a new branch tag is created with : </para>
+      <para>And then a new branch tag is created with:</para>
       
       <screen>/usr/src&prompt.root; <userinput>cvs rtag -b -rRELENG_4_4_BP RELENG_4_4 src</userinput></screen>
       
@@ -267,7 +267,7 @@
 
       <para>Before the final release can be tagged, built, and
         released, the following files need to be modified to reflect
-        the correct version of FreeBSD : </para>
+        the correct version of FreeBSD:</para>
 
       <itemizedlist>
         <listitem>
@@ -443,7 +443,7 @@
        release build. Most of these variables are documented at the
        top of <filename>src/release/Makefile</filename>. The exact
        command used to build the official FreeBSD 4.4 (x86) release
-       was : </para>
+       was:</para>
      
      <screen><command>make <literal>release CHROOTDIR=/local3/release \
        BUILDNAME=4.4-RELEASE \
@@ -863,7 +863,7 @@
     url="mailto:phk@FreeBSD.org">Poul-Henning Kamp</ulink>, and others
     who worked on the release engineering tools in the very early days
     of FreeBSD.  This article was influenced by release engineering
-    documents from the CSRG[14] , the NetBSD Project[11], and John
+    documents from the CSRG[14], the NetBSD Project[11], and John
     Baldwin's proposed release engineering process notes[12].</para>
 </sect1>
 

en_US.ISO8859-1/articles/storage-devices/article.sgml

@@ -393,7 +393,7 @@ disk            wd3     at wdc1 drive 1</programlisting>
 	    <literal>A-8</literal> indicates a 15 Mbits/second controller
 	    capable of handling 52 sectors/track.  A <literal>D</literal>
 	    means a 15 Mbits/second controller that can also handle drives
-	    with &gt; 36 sectors/track (also 52 ?).</para>
+	    with &gt; 36 sectors/track (also 52?).</para>
 	      
 	  <para>All variations should be capable of using 1:1 interleaving.
 	    Use 1:1, FreeBSD is fast enough to handle it.</para>
@@ -986,7 +986,7 @@ sd0(bt0:0:0): Direct-Access 1350MB (2766300 512 byte sectors)</screen>
 	    and, last but not least, have more capacity.  You can imagine that
 	    the value reported by the drive when inquiring about the geometry
 	    now becomes suspect at best, and nearly always misleading.  When
-	    asked for a geometry , it is nearly always better to supply the
+	    asked for a geometry, it is nearly always better to supply the
 	    geometry used by the BIOS, or <emphasis>if the BIOS is never going
 	      to know about this disk</emphasis>, (e.g. it is not a booting
 	    disk) to supply a fictitious geometry that is convenient.</para>

en_US.ISO8859-1/articles/vm-design/article.sgml

@@ -811,7 +811,7 @@
 
 	  <para>This is what Page coloring does.  Instead of assigning
 	    <emphasis>random</emphasis> physical pages to virtual addresses,
-	    which may result in non-optimal cache performance , Page coloring
+	    which may result in non-optimal cache performance, Page coloring
 	    assigns <emphasis>reasonably-contiguous</emphasis> physical pages
 	    to virtual addresses.  Thus programs can be written under the
 	    assumption that the characteristics of the underlying hardware

en_US.ISO8859-1/books/arch-handbook/jail/chapter.sgml

@@ -68,7 +68,7 @@
         <para>In <filename>jail.c</filename>, the first thing I would
           note is the declaration of an important structure
           <literal>struct jail j</literal>; which was included from
-          <filename>/usr/include/sys/jail.h</filename> .
+          <filename>/usr/include/sys/jail.h</filename>.
 
         <para>The definition of the jail structure is:</para>
 
@@ -486,14 +486,14 @@ static int bpfopen(dev, flags, fmt, p)
 
       <para>There are certain protocols which are very common, such as
         TCP, UDP, IP and ICMP. IP and ICMP are on the same level: the
-        network layer 2 . There are certain precautions which are
+        network layer 2. There are certain precautions which are
         taken in order to prevent a jailed process from binding a
         protocol to a certain port only if the <literal>nam</literal>
         parameter is set. nam is a pointer to a sockaddr structure,
         which describes the address on which to bind the service. A
         more exact definition is that sockaddr "may be used as a
         template for reffering to the identifying tag and length of
-        each address"[2] . In the function in
+        each address"[2]. In the function in
         <literal>pcbbind</literal>, <literal>sin</literal> is a
         pointer to a sockaddr.in structure, which contains the port,
         address, length and domain family of the socket which is to be

en_US.ISO8859-1/books/developers-handbook/jail/chapter.sgml

@@ -68,7 +68,7 @@
         <para>In <filename>jail.c</filename>, the first thing I would
           note is the declaration of an important structure
           <literal>struct jail j</literal>; which was included from
-          <filename>/usr/include/sys/jail.h</filename> .
+          <filename>/usr/include/sys/jail.h</filename>.
 
         <para>The definition of the jail structure is:</para>
 
@@ -486,14 +486,14 @@ static int bpfopen(dev, flags, fmt, p)
 
       <para>There are certain protocols which are very common, such as
         TCP, UDP, IP and ICMP. IP and ICMP are on the same level: the
-        network layer 2 . There are certain precautions which are
+        network layer 2. There are certain precautions which are
         taken in order to prevent a jailed process from binding a
         protocol to a certain port only if the <literal>nam</literal>
         parameter is set. nam is a pointer to a sockaddr structure,
         which describes the address on which to bind the service. A
         more exact definition is that sockaddr "may be used as a
         template for reffering to the identifying tag and length of
-        each address"[2] . In the function in
+        each address"[2]. In the function in
         <literal>pcbbind</literal>, <literal>sin</literal> is a
         pointer to a sockaddr.in structure, which contains the port,
         address, length and domain family of the socket which is to be

en_US.ISO8859-1/books/faq/book.sgml

@@ -5827,7 +5827,7 @@ C:\="DOS"</programlisting>
             URL="http://www.vmunix.com/mark/FreeBSD/ZIP-FAQ.html">
             Mark Mayo's ZIP FAQ</ulink>)</para>
 
-          <para>If it is a ZIP drive or a floppy , you have already got a DOS
+          <para>If it is a ZIP drive or a floppy, you have already got a DOS
             filesystem on it, you can use a command like this:</para>
 
           <screen>&prompt.root; <userinput>mount -t msdos /dev/fd0c /floppy</userinput></screen>

en_US.ISO8859-1/books/handbook/config/chapter.sgml

@@ -876,7 +876,7 @@ kern.maxfiles: 2088 -> 5000</screen>
       <para>The &man.tunefs.8; program can be used to fine-tune a
 	filesystem.  This program has many different options, but for
 	now we are only concerned with toggling Soft Updates on and
-	off, which is done by :</para>
+	off, which is done by:</para>
 
       <screen>&prompt.root; tunefs -n enable /filesystem
 &prompt.root; tunefs -n disable /filesystem</screen>

en_US.ISO8859-1/books/handbook/cutting-edge/chapter.sgml

@@ -179,7 +179,7 @@
       
 	<orderedlist>
 	  <listitem>
-	    <para>Join the &a.current; and the &a.cvsall; .  This is not
+	    <para>Join the &a.current; and the &a.cvsall;.  This is not
 	      just a good idea, it is <emphasis>essential</emphasis>.  If
 	      you are not on the <emphasis>&a.current;</emphasis>,
 	      you will not see the comments that people are
@@ -238,7 +238,7 @@ subscribe cvs-all</programlisting>
  		  customize the sample supfile above, and configure 
  		  <link linkend="cvsup">cvsup</link> for your environment.
  		  If you want help doing this configuration,
- 		  simply type : </para>
+ 		  simply type:</para>
 
  		<screen>&prompt.root; <userinput>pkg_add -f ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/packages/All/cvsupit-3.0.tgz</userinput></screen>
 

en_US.ISO8859-1/books/handbook/disks/chapter.sgml

@@ -1001,7 +1001,7 @@ scsibus1:
       <screen>&prompt.root; <userinput>burncd -f /dev/acd1c -s 12 data archive.tar.gz fixate</userinput></screen>
 
       <para>In order to retrieve the data burned to such a CD, you
-	  must read data from the raw device node :</para>
+	  must read data from the raw device node:</para>
 
       <screen>&prompt.root; <userinput>tar xzvf /dev/acd1c</userinput></screen>
 

en_US.ISO8859-1/books/handbook/install/chapter.sgml

@@ -2768,7 +2768,7 @@ do so by typing: /stand/sysinstall .
     <para>Selecting <guibutton>[ No ]</guibutton> and pressing
       <keycap>Enter</keycap> will abort
       the installation so no changes will be made to your system.  The
-      following message will appear :</para>
+      following message will appear:</para>
 
     <screen>                                Message
 Installation complete with some errors.  You may wish to scroll
@@ -3070,7 +3070,7 @@ use the current settings.
 
 	<para>To allow anonymous FTP, use the arrow keys to select
 	  <guibutton>[ Yes ]</guibutton> and press <keycap>Enter</keycap>.
-	  The following screens (or similar) will display :</para>
+	  The following screens (or similar) will display:</para>
 
 	<figure id="anon-ftp2">
 	  <title>Default Anonymous FTP Configuration</title>
@@ -3082,7 +3082,7 @@ use the current settings.
 	  </mediaobject>
 	</figure>
 
-	<para>Pressing <keycap>F1</keycap> will display the help :</para>
+	<para>Pressing <keycap>F1</keycap> will display the help:</para>
 
 	<screen>This screen allows you to configure the anonymous FTP user.
 
@@ -3431,7 +3431,7 @@ To change any of these settings later, edit /etc/rc.conf
 	interval, select <guimenuitem>Saver</guimenuitem> again.  At the
 	Screensaver Options menu, select <guimenuitem>Timeout</guimenuitem>
 	using the arrow keys and press <keycap>Enter</keycap>.  A pop-up
-	menu will appear :</para>
+	menu will appear:</para>
 
       <figure id="saver-timeout">
 	<title>Screensaver Timeout</title>
@@ -3880,7 +3880,7 @@ To change any of these settings later, edit /etc/rc.conf
 
 	  <para>Verify all the settings once again and select
 	    <guibutton>Done</guibutton> and the following message will
-	    display :</para>
+	    display:</para>
 
 	  <screen>If you've finished configuring everything press the
 Okay button to start the X server using the configuration
@@ -3936,7 +3936,7 @@ when you've finished.</screen>
       </procedure>
 
       <para>Once the configuration is done, the installation program will
-	need to create a link to the server :</para>
+	need to create a link to the server:</para>
 
       <screen>         Do you want to create an 'X' link to the SVGA server? 
 
@@ -4096,7 +4096,7 @@ when you've finished.</screen>
       <para>You should add at least one user during the installation so
 	that you can use the system without being logged in as root.  The
 	root partition is generally small and running applications as
-	root can quickly fill it.  A bigger danger is noted below :</para>
+	root can quickly fill it.  A bigger danger is noted below:</para>
 
       <screen>                     User Confirmation Requested
  Would you like to add any initial user accounts to the system? Adding
@@ -4295,7 +4295,7 @@ when you've finished.</screen>
 
       <para>Select <guibutton>[X Exit Install]</guibutton> with the arrow
 	keys and press <keycap>Enter</keycap>.  You will be asked to
-	confirm exiting the installation :</para>
+	confirm exiting the installation:</para>
 
       <screen>                     User Confirmation Requested
  Are you sure you wish to exit? The system will reboot (be sure to  
@@ -4333,7 +4333,7 @@ when you've finished.</screen>
 	(rpratt, in this example).  Avoid logging in as root except when
 	necessary.</para>
 
-      <para>Typical boot messages :</para>
+      <para>Typical boot messages:</para>
 
 <screen>Copyright (c) 1992-2002 The FreeBSD Project. 
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml

@@ -552,7 +552,7 @@ disco.example.com 7115-70839-20412</screen>
 
         <step><para>Patch the
           <filename>usr/local/maple/bin/maple.system.type</filename>
-          file with the following :</para>
+          file with the following:</para>
 <programlisting>   ----- snip ------------------
 *** maple.system.type.orig      Sun Jul  8 16:35:33 2001
 --- maple.system.type   Sun Jul  8 16:35:51 2001
@@ -633,8 +633,7 @@ exit 0
 
 	<listitem><para><command>lmgrd</command> is known to be very picky
 	  about the license file and to core dump if there are any
-	  problems.  A correct license file should look like this
+	  problems.  A correct license file should look like this:</para>
-	  :</para>
 
 <programlisting># =======================================================
 # License File for UNIX Installations ("Pointer File")
@@ -699,7 +698,7 @@ FEATURE Maple maplelmg 2000.0831 permanent 1 XXXXXXXXXXXX \
       <para>If you want to run the intelligent agent, you will
 	also need to install the Red Hat Tcl package:
 	<filename>tcl-8.0.3-20.i386.rpm</filename>.  The general command
-	for installing packages with the official RPM port is :</para>
+	for installing packages with the official RPM port is:</para>
       
       <screen>&prompt.root; <userinput>rpm -i --ignoreos --root /compat/linux --dbpath /var/lib/rpm <replaceable>package</replaceable></userinput></screen>
 
@@ -1575,7 +1574,7 @@ Shell: /bin/sh</programlisting>
         <title>Entries in /etc/services</title>
 
         <para>SAP R/3 requires some entries in file
-          <filename>/etc/services</filename> , which will not be set
+          <filename>/etc/services</filename>, which will not be set
           correctly during installation under FreeBSD.  Please add the
           following entries (you need at least those entries
           corresponding to the instance number - in this case,
@@ -1950,7 +1949,7 @@ options SEMUME=100 #number of UNDO keys</programlisting></para>
 
         <para>Confirm all Screens with Enter until the software is
           installed, except that one has to deselect the
-          <emphasis>Oracle On-Line Text Viewer</emphasis> , as this is
+          <emphasis>Oracle On-Line Text Viewer</emphasis>, as this is
           not currently available for Linux. Oracle then wants to
           relink with <command>i386-glibc20-linux-gcc</command>
           instead of the available <command>gcc</command>,
@@ -1988,7 +1987,7 @@ options SEMUME=100 #number of UNDO keys</programlisting></para>
 	<username>idsamd</username>
         (&lt;sid&gt;adm) and 
 	<username>oraids</username> (ora&lt;sid&gt;). They should now
-        both have the files <filename>.profile</filename> ,
+        both have the files <filename>.profile</filename>,
         <filename>.login</filename> and <filename>.cshrc</filename>
         which are all using <command>hostname</command>. In case the
         system's hostname is the fully qualified name, you need to

en_US.ISO8859-1/books/handbook/mail/chapter.sgml

@@ -369,7 +369,7 @@ procmail: "|/usr/local/bin/procmail"</programlisting>
       <para>The aliases update matches the mailbox name on the left of
 	the colon, and will expand it to the target(s) on the right.  The
 	first example simply expands the mailbox <username>root</username>
-	to the mailbox <username>localuser</username> , which is then
+	to the mailbox <username>localuser</username>, which is then
 	looked up again in the aliases database.  If no match is found,
 	then the message is delivered to the local user
 	<username>localuser</username>.  The next example shows a mail
@@ -668,7 +668,7 @@ the DNS for <quote>customer.com</quote>.</programlisting>
  	    straight forward solution is to put your ISP's address in
  	    a relay-domains file at
  	    <filename>/etc/mail/relay-domains</filename>.  A quick way
- 	    to do this would be :</para>
+ 	    to do this would be:</para>
 
 	  <screen>&prompt.root; <userinput>echo "your.isp.example.com" &gt; /etc/mail/relay-domains</userinput></screen>
 
@@ -680,7 +680,7 @@ the DNS for <quote>customer.com</quote>.</programlisting>
   	    is also very useful if you only have one or two email
   	    accounts setup.  If there are a large number of addresses
   	    to add, you can simply open this file in your favorite
-  	    text editor and then add the domains one per line :</para>
+  	    text editor and then add the domains one per line:</para>
 
 	  <programlisting>your.isp.example.com
 other.isp.example.net

en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml

@@ -86,7 +86,7 @@
       <title>Distributors</title>
 
       <para>If you are a reseller and want to carry FreeBSD CDROM products,
-	please contact a distributor :</para>
+	please contact a distributor:</para>
 
       <itemizedlist>
 	<listitem>

en_US.ISO8859-1/books/handbook/ports/chapter.sgml

@@ -1082,7 +1082,7 @@ Receiving lsof_4.57D.freebsd.tar.gz (439860 bytes): 100%
 	    to a remote file server or local read-only CDROM media.
 	    If this is the case, then you should specify a different
 	    directory to be used for storing distfiles with the
-	    following command :</para>
+	    following command:</para>
 
 	  <screen>&prompt.root; <userinput>make DISTDIR=<replaceable>/local/dir/with/write/permission</replaceable> install</userinput></screen>
 	  </answer>

en_US.ISO8859-1/books/handbook/preface/preface.sgml

@@ -377,7 +377,7 @@
   <para>Keys are rendered in <keycap>bold</keycap> to stand out from
     other text.  Key combinations that are meant to be typed
     simultaneously are rendered with `<literal>+</literal>' between
-    the keys, such as :</para>
+    the keys, such as:</para>
 
   <para>
     <keycombo action="simul">
@@ -388,7 +388,7 @@
   </para>
 
   <para>Keys that are meant to be typed in sequence will be separated with
-    commas, for example :</para>
+    commas, for example:</para>
 
   <para>
     <keycombo action="simul">

en_US.ISO8859-1/books/handbook/security/chapter.sgml

@@ -366,7 +366,7 @@
 
       <programlisting>foobar:R9DT/Fa1/LV9U:1000:1000::0:0:Foo Bar:/home/foobar:/usr/local/bin/tcsh</programlisting>
 
-      <para>Should be changed to this :</para>
+      <para>Should be changed to this:</para>
 
       <programlisting>foobar:*:1000:1000::0:0:Foo Bar:/home/foobar:/usr/local/bin/tcsh</programlisting>
 

en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml

@@ -624,7 +624,7 @@ crw-rw----    1 uucp     dialer    28, 193 Feb 15 14:38 /dev/cuala1</screen>
 	program.</para>
 	  
       <para>Thus, to configure terminals for your FreeBSD system the
-	following steps should be taken as <username>root</username> :</para>
+	following steps should be taken as <username>root</username>:</para>
 
       <procedure>
 	<step>
@@ -809,7 +809,7 @@ ttyd5   "/usr/libexec/getty std.19200"  vt100  on  insecure
 	<para>After making the necessary changes to the
 	  <filename>/etc/ttys</filename> file you should send a SIGHUP
 	  (hangup) signal to the <command>init</command> process to
-	  force it to re-read its configuration file.  For example :</para>
+	  force it to re-read its configuration file.  For example:</para>
 
 	<screen>&prompt.root; <userinput>kill -HUP 1</userinput></screen>
 
@@ -956,7 +956,7 @@ ttyd5   "/usr/libexec/getty std.19200"  vt100  on  insecure
 	<para>If you are using an external modem, then you will of
 	  course need the proper cable.  A standard RS-232C serial
 	  cable should suffice as long as all of the normal signals
-	  are wired :</para>
+	  are wired:</para>
 
 	<itemizedlist>
 	  <listitem>
@@ -1313,7 +1313,7 @@ vq|VH57600|Very High Speed Modem at 57600,8-bit:\
 	  <varname>crtscts</varname> on serial port #1's
 	  (<devicename>COM2:</devicename>) dial-in and dial-out initialization
 	  devices, the following lines could be added to
-	  <filename>/etc/rc.serial</filename> :</para>
+	  <filename>/etc/rc.serial</filename>:</para>
 	<programlisting># Serial port initial configuration
 stty -f /dev/ttyid1 crtscts
 stty -f /dev/cuai01 crtscts</programlisting>